ECHP-II-Inspection, Checking and monitoring of the mechanical equipments with allied works in SCH-II

Charges for Inspection and giving clearance to Coal Handling control room operator to start the secondary crusher, Eccentric disc screen, belt feeder, shuttle feeders and Dust extraction system and allied equipments one by one whenever required, After starting the system, inspection of all the running equipments and condition of system and inform to CHS -5 operator to start coal feeding, Checking the out put size of crushed coal below 30 mm size in coal yard conveyor 49 & 54 by visual inspection, To change the discharge coal feeding either conveyor 49 or conveyor 54 to coal yard, by operating to move the BFD direction as per the instruction of site incharge and coal handling control room operator, Checking the ring granulator bearing housing, drive & driven pulley, feeder pulley bearings temperature of all the running equipments to be recorded in shift log book, Checking the oil level in all gearboxes, Checking the all drive fluid coupling, gear box and connecting multidisc assembly bolts and inspect any oil spray found in the system. If any abnormalities found in the system, inform to the maintenance engineer of SCH-II, During coal feeding any abnormality found in system immediately stop the crusher and alternate stand by system put in to service position, Checking of all the running drive ‘V’ belts, conveyor belt and adjusting the belt tension if necessary, Isolation of equipments as per guidance to follow the LC works in secondary crusher house-II, Arranging to attend the defect then and there in secondary crusher running equipments in coordination with maintenance incharge of SCH-II, Inform the condition of all the running equipments position to the field maintenance engineer incharge, All the shift duty operation activities are recorded in the shift log book then and there, Inspection and Monitoring all the running equipments bearing temperature by hand touch, vibration of running equipments by hand touch, oil level in gear box, fluid coupling, cleaning the air breather in all gear box, all bolts and nuts of all running equipments bed frame structure, all bearing housing assembly and tightness checking, any abnormality of running equipments, the belt scrapper, return belt scrappers, tracking the conveyor belt and also checking the belt joints, adjusting the skirt board rubber to minimize the spillage coal, Positioning the Shuttle feeder, when every changing of crusher, Inspection of all coal transfer chutes and deflecter plate, and free rotation of idler.