REPAIRS TO CHAJJAS, FACIA, PARAPET , RAIN WATER PIPE , INTERNAL WATER SUPPLY , WOODEN / STEEL , ALUMINIUM JOINERIES AND ALLIED B/R WORKS UNDER AGE B/R I .

Amount

Demolition of Brick/stone works masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and as directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete(reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended wor etc complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete(un-reinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed by Engr-in-Charge.

Taking down eaves gutters and rain water pipes (any size or patterns) including all fittings,heads,shoes,bends,swan-necks etc complete all as specified and as directed by Engr-in-Charge.

Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engr-in-Charge.

M&L brick work using sub class B brick curved or straight on plan exc 6 mtr mean radius built in cm (1:6). complete all as specified and as directed by Engr-in-Charge.

M&L brick work using sub class B brick curved or straight on plan to any radius in half brick wall builit in CM(1:4) complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 15 mm thick on brick surface in CM (1:4) mixed with WPC as per manufacturer instructions and finishes surfaces even and smooth with out using extra cement. Note - WPC will be measured and paid separtely

Supply only liquid water proofing compound, complete all as specified and as directed by Engr-in-Charge.

M&L Reinforced cement concrete in mix 1:1½:3 (using 20mm graded aggregates) in chajjas etc complete all as specified and directed.

M&L Reinforced cement concrete in mix 1:1½:3 (using 20mm graded aggregates) in Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like etc complete all as specified and directed.

M&L formwork flat to chullah hoods, chajjas, troughs and similar items including edges fair finished surfaces complete all as specified and directed.

M&L formwork flat to fins, louvers, fascia including fair finished surfaces complete all as specified and directed.

Form work to edges of concrete flats, treads, opening in concrete walls, floor and roofs n.exc 20cm wide and sides of RCC/PCC bands in walls etc for fair finished complete all as specified and directed.

M&L for repair and rendering 10mm thick in cm 1 :3 on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs complete all as specified and as directed by Engr-in-Charge.

M&L mild steel works as in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes and similar works conforming to Fe-290, Gde-E165 etc complete all as specified and as directed by Engr-in-Charge.

M&L mild steel deformed TMT bar 10mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by Engr-in-Charge.

M/L PCC 1:2:4 type B1 20mm grade aggregate as in padding, hold fasts/filling of grills or similar work complete all as specified and as directed by Engr-in-Charge.

S&F PVC(SWR) pipe 110 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and as directed by Engr-in-Charge.

S&F PVC(SWR) pipe 75 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and as directed by Engr-in-Charge.

S&F PVC(SWR) bends any radius 110 mm dia complete all as specified and as directed by Engr-in-Charge.

S&F PVC(SWR) bends any radius 75 mm dia complete all as specified and as directed by Engr-in-Charge.

S&F in repair PVC(SWR) floor trap 75mm dia plain with grating incl jointing with solvent cement complete all as specified and as directed by Engr-in-Charge.

M&l for complete removal of existing treatment on old surface of wall by brooming down with wire brushing etc and applying two coats of exterior weather coat plastic emulsion paint complete all as specified and as directed by Engr-in-Charge(Weather coat shall be of Asian paint, Apex ,ultima or equivalent as approved by GE)

M&l for Preparing surfaces plastered on new surface of wall and applying two coats of exterior weather coat plastic emulsion paint over one coat of cement base primer complete all as specified and as directed by Engr-in-Charge(Weather coat shall be of Asian paint, Apex ,ultima or equivalent as approved by GE)

M&L two coats of cement base paint over one coat of primer including preparation of new surface all as specified and directed.

Complete removal of existing treatment and preparing the surface of walls and apply two coat of cement base paint over a coat of cement primer complete all as specified and directed by Engr-in-Charge.

M&L in applying two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparatinon of surfaces complete all as specified and as directed by Engr-in-Charge.

Taking up or down steel tubing and connections including for refixing or removal 15mm borecomplete all as specified and as directed by Engr-in-Charge.

Taking up or down steel tubing and connections including for refixing or removal 20mm borecomplete all as specified and as directed by Engr-in-Charge.

S&F steel tubing and connection in new or old position to walls,ceiling,floors etc complete all as specified and as directed 15 mm bore medium grade , with all fittings ,fitted to wall and ceiling or laid in floor complete all as specified and as directed by Engr-in-Charge.

Fixing only tubes, any grade to walls and ceiling or laying in floors of dia 15mm bore, complete all as specified and directed.

S&F steel tubing and connection in new or old position to walls,ceiling,floors etc complete all as specified and as directed 20 mm bore medium grade , with all fittings ,fitted to wall and ceiling or laid in floor complete all as specified and as directed by Engr-in-Charge.

Fixing only tubes, any grade to walls and ceiling or laying in floors of dia 20mm bore, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), and rubbish off premises etc complete all as specified and as directed by Engr-in-Charge

M&L for coloured glazed ceramic colour tiles in vertical surface in Skirting/Dados 350mmx250mmx7mm /450x350x7mm thick over and including10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and as directed by Engr-in-Charge.

M & L Non Skid ceramic colour ceramic tiles,7 to 8mm thick square/rectangular area of each tile 0.06sqm but not exceeding 0.11sqm ,in floors over and including 15mm thick screed bed in CM(1:6),set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface coloured cement to match the floor complete all as specified and as directed by Engr-in-Charge.

Dismantling water tanks and removing exc 250 & nexc 500 ltrs capecity complete all as specified and as directed by Engr-in-Charge.

S&F PVC rotational moulded polythylene water storage tanks 500 litres capacity incl cover etc complete all as specified and as directed by Engr-in-Charge.

S&F in repair Bib taps ,15 mm bore,chromium plated fancy type with crutch or butterfly handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engr-in-Charge.

Taking down chowkhat with shutter without taking off shutter from chowkhat not exceeding 1.5 Sqm each complete all as specified and as directed by Engr-in-Charge

Ditto all as per item No 01 but exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed by Engr-in-Charge

Taking down shutter of any description nexc 1 Sqm each complete all as specified and as directed by Engr-in-Charge

Taking down shutter of any description exc 1 Sqm but n'exc 2 Sqm each complete all as specified and as directed by Engr-in-Charge

S&F 35mm Flush shutters(ISI Marked) solid core construction, with block board core and plywood, commercial type on both sides complete all as specified and as directed by Engr-in-Charge. Make M/s Jain wood Industries

S&F 35mm thick glazed and skeletion shutters 2nd class hardwood without sash bars complete all as specified and as directed by Engr-in-Charge.

S&F 30mm thick glazed and skeletion shutters 2nd class hardwood without sash bars for window,ventilators complete all as specified and as directed by Engr-in-Charge. Make M/s Jain wood Industries

S & F Glazed and skeleton shutters (30mm thick in 2nd class hardwood) open rebated and prepared to receive glass, gauze, etc(with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc for window & ventilators complete all as specified and as directed by Engr-in-Charge.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetail ed or welded all complete all as specified and as directed by Engr-in-Charge.

S&F Powder coated aluminium frame for windows with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S& F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F Sheet glass,4.mm ordinary quality and glazing with in square n exc 0.5 sq. m in each pane, complete all as specified and directed.

S&F pressed steel frames of size 125 x 60 mmx1.25mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed by Engr-in-Charge.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed by Engr-in-Charge. Make : RAJYSHREE PLASTIWOOD, M/S SINTEX

Supplied and fixed factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame as per specification & drawing complete all as specified and as directed by Engr-in-Charge. Make : RAJYSHREE PLASTIWOOD, M/S SINTEX

Dismantling of fillets rails etc under 40 sqcm in section in framed work complete all as specified and as directed by Engr-in-Charge

S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete withot glazing bars dovetail ed or welded all complete all as specified and as directed by Engr-in-Charge.

S&F factory made steel ventilators with top hung shutters including hinges,steel peg stay complete all as specified and as directed by Engr-in-Charge.

S&F GI mild steel wire cloth 0.56 nominal dia wire and average width aperture 1.18mm and fixed with pinned tack or galvanized staples complete all as specified and as directed by Engr-in-Charge.

M&L 2nd class H/wood chowkhats, plain, solid, straight, wrought, framed, rebate on the solid,rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by Engr-in-Charge.

M&L for mild steel works as in hold fast/wind ties etc,complete all as specified and directed.

S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engr-in-Charge.

S&F in repair MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engr-in-Charge.

S&F mild steel sliding door bolts 300mm long complete all as specified and as directed by Engr-in-Charge.

S&F in repair mild steel sliding door bolts 300mm long complete all as specified and as directed by Engr-in-Charge.

S&F 100mm size MS butt hinges, medium weight cold rolled complete all as specified and as directed by Engr-in-Charge.

S&F in repair 100mm size MS butt hinges, medium weight cold rolled complete all as specified and as directed by Engr-in-Charge.

S & F 200mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-Charge.

S & F in repair 200mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-Charge.

S & F 150mm long Aluminium handle cast type anodised complete all as specified and as directed by Engr-in-Charge.

S & F in repair 150mm long Aluminium handle cast type anodised complete all as specified and as directed by Engr-in-Charge .

S&F 75 mm long mild steel medium weight collrolled butthinges complete all as specified and as directed by Engr-in-Charge.

S&F in repair 75 mm long mild steel medium weight collrolled butthinges complete all as specified and as directed by Engr-in-Charge.

S&F 125mm size aluminium handles, cast type anodised complete all as specified and as directed by Engr-in-Charge.

S&F in repair 125mm size aluminium handles, cast type anodised complete all as specified and as directed by Engr-in-Charge.

S&F 150mm long Aluminium anodised barrel tower both of extruded section complete all as specified and as directed by Engr-in-Charge.

S & F in Repair 150mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-Charge.

S&F small fitting shaped door and window stops n'exc 200 cucm each of 2nd class hard wood complete all as specified and as directed by Engr-in-Charge.

S&F 50mm Butt hings medium weight cold rolled and mild steel complete all as specified and as directed by Engr-in-Charge.

S&F in repair 50mm Butt hings medium weight cold rolled and mild steel complete all as specified and as directed by Engr-in-Charge.

M&L for 18/19 mm thick preliminated particle board Exterior grade preliminated one side with decorative choice laminated & other side balancing white laminated fixed with screw to timber fram work complete all as specified and as directed by Engr-in-Charge.

S & F 30 mm continous (piano ) hinges mild steel, bright finish or electrogalvanised complete all as specified and as directed by Engr-in-Charge.

S&F 75 mm Hasp & staple MS stove enammeled black , including bolt to hinge plate and fixed with screw complete all as specified and as directed by Engr-in-Charge.

S&F 40mm dia , cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed by Engr-in-Charge.

M & L preparation of new surfaces & apply two coats of synthetic enamel paint over one coat primer exc 10 cm width/girth including preparation of new surface on wooden surface complete all as specified and as directed by Engr-in-Charge.

M&L in applying two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparatinon of surfaces complete all as specified and as directed by Engr-in-Charge.

M&L PCC 1:2:4 type B1 20mm grade aggregate as in padding, hold fasts/filling of chowkhats or similar work complete all as specified and as directed by Engr-in-Charge.

Hacking out old broken glass any thickness from metal/wooden frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed by Engr-in-Charge.

S & F Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane 3mm thick complete all as specified and as directed by Engr-in-Charge.

ditto all as per above item No 91 but n.exc 0.5 sqm in each pane of 3mm thick figured glass complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete(un-reinforced) in ground floors and paving not exceeding 15 cm thickness below or above the ground floor etc complete all as specified and as directed by Engr-in-Charge.

M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in sunken portion and making adequate slope toward spout pipe complete all as specified and as directed.

M&L for rendering 15 mm thick on concrete or brick surface in CM (1:3) mixed with WPC as per manufacturer instructions and finishes surfaces even and smooth with out using extra cement.Note - WPC will be measured and paid separtely

M&L for applying two coats evenly a tack coat of hot air blown bitumen of grade 85/25 @ 1.50 Kg per sqm per coat including cleaning of surface over polythene film complete all as specified and as directed

M&L for polythene film black 200 micron thick laid in floor, vertical surface etc complete all as specified and directed.

M&L Cement concrete, Type E2- 1:5:10(40mm graded aggreated in foundations, filling and mass concrete in sunken portion of IWC and bathroom, complete all as specified and directed.

S&F in repair vitreous china squatting pan , Orissa pattern size 580 x 440 mm white, with integral foot rest including connection to trap, and to flush pipe, anti-syphonage etc, complete all as specified and directed.

S&F in repair 10 ltr capacity PVC Valveless ,syphonic action type , flushing cistern , low level , white with inlet ball valve, float and handle including brackets including flush pipe 32mm polythylene of low or high density of PVC 32mm dia for low level cistern and all needed componantes supplied and fixed all as specified and directed .

S&F in repair PVC Connections 15mm size with PTMT nuts of length 450mm including washer, complete all as specified and directed.

S & F in repair angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed,(Minimum weight 15mm-90gms) complete all as specified and as directed by Engr-in-Charge.

Roof treatment for approachable roof including complete removal of existing roof treatment :- (i) Rendering 10mm thick in cement mortor (1:3) mixed with liquid water proofing compound finished the surface fair and even.(ii) Applying evenly a coat of bitumen primer @ 0.30 Kg/Sqm. (iii)Applying APP modified polymeric membrane over the bitumen coat surface ,weight not less than 3.2-3.5 Kg/Sqm and over lap 100mm and sealed by torch application as per manufacture insteructions. (iv) A coat of hot blown bitumen @ 1.2 Kg/ Sqm shall be applied over polymeric membrane and blinded with clean dry sand at the rate of 0.5 Kg per Sqm, complete all as specified and directed.

M&L 22 mm thick machine pressed cement concrete tiles with grey cement without pigment of size 250 mm x 250 mm laid in neat cement slurry over and including 15 mm thick bed screed in CM 1:4 mixed with chemical compound PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD 200 milli - litre mixed with 50 Kg of cement or STP No 1 (LIQUID) of STP LTD in proportion 200 milli litre per 50 Kg cement,as per manufactures instructions and tiles properly laid with 3 mm wide joints filled with FEVIMATE TG of DR FIXIT of PIDILITE INDUSTRIES LTD or TILE GLUE of STP LTD as per manufactures instructions complete all as specified and directed by Engr- in - charge.

Roof treatment for non approachable roof including complete removal of existing roof treatment :- (i) Rendering 10mm thick in cement mortor (1:3) mixed with liquid water proofing compound finished the surface fair and even.(ii) Applying evenly a coat of bitumen primer @ 0.30 Kg/Sqm. (iii)Applying APP modified polymeric membrane over the bitumen coat surface ,weight not less than 3.20-3.50 Kg/Sqm and over lap 100mm and sealed by torch application as per manufacture insteructions. (iv) Applying two coats of aluminium paint @ 200 gm/sqm over polymeric membrene, complete all as specified and directed.

M&L rendering on other than fair faces of brick work 15mm thick in CM 1:6 and to be finished smooth and even with out using extra cement for internal surface complete all as specified and as directed by Engr-in-Charge.

M&L Rendering 5mm thick in cm 1:3 on ceilling. surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

Supply and fix 75 mm dia bore PVC (SWR) branch piece,single (single Y) equal or unequal with access door, complete all as specified and directed.

Supply and fix 75 mm dia bore PVC (SWR) branch piece,double (double Y) equal or unequal with access door, complete all as specified and directed.

Supply and fix 75 mm dia bore PVC (SWR) junction single,(single T) equal or un equal with access door,complete all as specified and directed.

Supply and fix 110 mm dia bore PVC (SWR) branch piece, single (single Y) equal or un equal with access door, complete all as specified and directed.

Supply and fix 110 mm dia bore PVC (SWR) branch piece, double (double Y) equal or un equal with access door, complete all as specified and directed.

Supply and fix 110 mm dia bore PVC (SWR) junction single, (single T) equal or un equal with access door, complete all as specified and directed.

Supply and fix clamp out of 50 mm by 5 mm flat iron and 16 mm dia round iron stay, including bolts and nuts and securing ends of stay to wall or roof for 110 mm PVC pipe including dismantling,complete all as specified and directed.

All as per item No 114 above but for 75 mm bore of pipe, complete all as specified and directed.

M&L for Preparing surfaces plastered on old surface of wall and applying one coat of cement paint over one coat of cement base primer complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old surfaces and applying one coat of white wash on wall including cornices etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old surfaces and applying one coat of white wash on ceiling including cornices etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new surfaces and applying two coat of white wash on wall including cornices etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new surfaces and applying two coat of white wash on ceiling including cornices etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation surfaces by washing ,rubbing down and stoping of distempered and pointed surface of wall and applying one coat of distemper oil emulsion white or tinted over primer on old wall surfaces all as specified and directed.

M&L for preparation surfaces by washing ,rubbing down and stoping of distempered and pointed surface of wall and applying two coat of distemper oil emulsion white or tinted over primer on new wall surfaces all as specified and directed.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and directed.

M&L for prepartion on old painted surfaces of steel and iron surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Excavation in post holes or similar holes each not exc 0.5 Cum getting out ,returning, filling and ramming earth in layers not exceeding 25 cm, watering and removing surplus soil to a distance nexc 50 mtr and making good surface complete all as specified and directed.

M&L plain cement concrete, Type C-2, 1:3:6 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed by the Engineer-in-Charge

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240

S&F plates (plain or chequered)channels, square cut or notched(odinary and couter sunk) forming holes, without any attachment of Gde Fe 410-W (Gde-E- 250)

S&F Mild steel works as in hand rails, wind ties for roof, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets for securing wire etc including all necessary drilling, bolting or riveting, etc; and similar work conforming to Fe 410-0 complete all as specified and directed.

M&L in applying two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces but n exc 10 cm width or girth complete all as specified and as directed by Engr-in-Charge.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed by Engr-in-Charge.

S&F Pre-painted galvatume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed by Engr-in-Charge.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or screws J-type or cranked hook bolts, complete all as specified and as directed by Engr-in-Charge.

S&F Asbestos cement twopiece adjustable plain wing ridge 6mm thick fixed with L-type or Jtype or cranked hook bolts, complete all as specified and as directed by Engr-in-Charge.

Dismantling wall and ceiling board (fibre,pulp,insulations etc) or insulation board any thickness including cover fillets complete all as specified and as directed by Engr-in-Charge.

M&L Anodised alumunium snap grid frame work for false ceiling grid of size 605mmx605mm complete hanges from GI wire complete all as specified and as directed by Engr-in-Charge.

S&F 4mm thick texture finish type ceiling board fixed to timber/metal framed work with screw as in ceiling snap grid complete all as specified and as directed by Engr-in-Charge.

Providing and applying two coats of Finazinc R which is a two component epoxy based, zinc rich anti corrosive protective coating for steel. The mixing ratio is comp. A and comp B is 94:6 (by wight), the product can be applied by brush . The 2nd coat may be applied within2 hours after application of the 1st coat. The density of the mix is 2.28 Kg/l at 270C as on celing/facia/chajja. Necessary scaffolding and protection complerte all as specified and directed.

M&L mild steel deformed TMT bar 6 to 8mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by Engr-in-Charge.

Proving cement concrete type B1 1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed.

M/S OMANIA ENTERPRISES

BUILDCON ENTERPRISES

M/S AMOD KUMAR PANDEY

m/s sheo kumar singh & sons

Associated Engineers

M/S KAMLESHWAR SINGH

M/S.R.S.Chauhan and Sons

M/s Ray construction