Providing 7.00 m Octogonal Pole with 150 W and 120 W LED Street Light Fittings over Kaduvetti Bridge in Thiruverkadu Municipal Limit.

Amount

Supply, Erection of 7m Free Standing Double Arm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 220 x 220 x 12mm as per IS-875 street lamp pole of Top dia 70mm ,Bottom dia130mm X3.00mm thick with 220mmX220mm square X 12mm thick base plate , 4 stiffner, earth coil, earth bolt, nut & washer including cost of single bracket, GI bolt , nut & washer , including cost of hylem sheet, with required wire including labour charges for errection and fixing with required materials etc.complete as per standard specification and as per the instructions of Departmental officers.

Earthing as per PWD standard with an earth electrode of 2 Mtr cross BG.1 Pipe of dia 32mm complete with necessary masonary work (SD 234)

Supply and fixing of 32A 4 way connectors in Pole switching Point.16A proceline fuse carier with suitable hylem sheet

Supply and fixing of 2 core 2.50 sq mm Copper cable from pole switching point to light fittings

Supply and installation of LED based Street Light luminaire made up of extured alluminium alloy body sealed toughened glass protector and pc side Covers. The optical and control Gear compartment should be with IP66 Tightness. Leds in Natural White (4000-4500K) Should be with special photometry. lences. Lensoflex, For road Lighting photometry. Led engine Should be able to accommodate sutable LED driven at 500mA and system Watage of 90 W The Luminaire Should be Protected aginest surge up to 10 KA. The optical Compartment and Electronice Compartment Should be provide with universal Mounting bracket wich allso allows the luminaire to change the inclination as required at site. All wire Used inside the liminaire should be silicon and all the hardware's Used should be of stainless steel L70:50000 hrs @ tq : 35 degree illumination Levels should be meet as per the requirments mentioned Make (Crompton, Bajaj, Surya ) 150 watts

Supply and installation of LED based Street Light luminaire made up of extured alluminium alloy body sealed toughened glass protector and pc side Covers. The optical and control Gear compartment should be with IP66 Tightness. Leds in Natural White (4000-4500K) Should be with special photometry. lences. Lensoflex, For road Lighting photometry. Led engine Should be able to accommodate sutable LED driven at 500mA and system Watage of 90 W The Luminaire Should be Protected aginest surge up to 10 KA. The optical Compartment and Electronice Compartment Should be provide with universal Mounting bracket wich allso allows the luminaire to change the inclination as required at site. All wire Used inside the liminaire should be silicon and all the hardware's Used should be of stainless steel L70:50000 hrs @ tq : 35 degree illumination Levels should be meet as per the requirments mentioned Make (Crompton, Bajaj, Surya ) 120 watts

Supply and laying of 4 core 16 sqmm pure armoured UG cable including cost and conveyance to site and including earth work excavation , refilling and cable laying and including all incidential charges etc.complete as per standard specification and as per the directions of Departmental officers.

Suoying and delivery Kiosk type pillar box of size 1220mmx914mm x 356mm made up of 14 SWG sheet moulded on 4 Nos of 40mm x 6 mm L TYPE M.S.Angle of 762 mm height with one No of 100 amps TPN Neutral Link fuse unit 3 Nos of 100 amps fuse unit molded on the wooden plank and 63 amps fuse unit three numbers per phase and 7/16 pvc unsheeted Copper wire from metre to 100A fuse Unit, 100 A fuse unit to TPN switch and TPN switch to Aluminium bus bars and 3 nos of aluminium bus bars of size 30 mm x 6 mm for three phase abd 1 No of Aluminium bus bar of size 25mm x 6 mm for neutral and 2 Nos of earthing with gauge G.I.Wire of 1.5 m long including earth work for size 0.30 x 0.30 x 0.045 and sand filling 15 cm thick and pcc 1:2:4 size 0.30 x 0.30 x 0.50m for four legs including cost and coveyance of all material to site and labour charges etc complete.

Erection of Kisok pillar box including masonry work with supply of cement, jelly, sand etc, including fixing of all the cables with termination in pillar box including supply of required suitable lugs, bolts, nuts,washers and with earthing.

Drilling and Erection of MS angle fabricated and hot dip galvanised 220x220x16mm - 2nos Cross stiffener - 8mm 220x220x6mm M24x220mm G.I bold nut with washer800 mm dia suitable for fixing the post to pillar including cost and etc,complete

Supply and fixing of 45 od HDPE black house with clamp set for fixing the pipe etc,complete

Supply of MS angle fabricated and hot dip galvanised 220x220x16mm - 2nos Cross stiffener - 8mm 220x220x6mm M24x220mm G.I bold nut with washer800 mm dia suitable for fixing the post to pillar including cost and etc,complete

HI TECH TRONICS (BID ID -1124739)