CONSTRUCTION OF STORE ROOM AND SALE OUTLET AT MYNKRE FARM, DHO,EAST JAINTIA HILLS DISTRICT

Amount

CIVIL WORKS BUILDING

Earthwork in excavation by manual means upto a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils. b.ln ordinary rock (soft rock/ medium rock/ hard shale)

Earthwork in filling (excluding rock) in trenches, plinth, sides of foundation otc in layers not exceeding 20 cm thick including breaking Of clods, consolidating each layer by ramming and watering, lead up to 50 in and lift up to 1.5 in . a With available excavated earth

Plandom rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) up to plinth level with: Cement mortar 1 :6 (1 cement: 6 coarse sand)

Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. a Brick soling (i) 100 mm

Plain cement concrete works in foundation bed for footing, steps, walls, brick works etc. below plinth level as specified including dewatering if necessary, and curing complete (shuttering where necessary shall be paid seperately). (b) In proportion 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size).

Plain cement concrete floor base in prop 1 :3:6 laid in alternate bays as specified with coarse aggregate Of size 13 mm to 32 mm including dewatering if necessary, and curing etc. complete. b 50 mm thick in prop 1:3:6

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level: (b) M20 or Prop. 1:1½:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, fillets, columns, pillars, posts and struts etc. above plinth level up to first floor level, excluding cost of centering, shuttering, finishing and reinforcement: b.M20 or 1 :11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, slabs, roofs having slope up to 15o,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to first floor level, excluding the cost of centering, shuttering, finishing and reinforcement. b M20 or 1:1½:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge. Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick

Half brick masonry with common burnt clay (non modular) 1stclass bricks in superstructure above plinth level up to first floor level. a Cement mortar 1:3 (1 cement:3 coarse sand)

CEMENT PLASTER (IN FINE SAND) 20 mm cement plaster of mix: (a) 1:4 (1 cement: 4 fine sand)

Supplying, fitting and fixing in position reinforcement bars up to 1st floor level, conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required) c Thermo-Mechanically Treated bars

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required diameter& length. b Sal wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) b Sal wood (i) 35 mm thick shutters

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete: b 125x70x4 mm (ordinary type)

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: b 200x10 mm

Providing and fixing bright finished brass handles with screws etc. complete: a 125 mm

Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete.

Providing, fitting and fixing steel windows (including ventilators) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15x3x100 mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65 mm and not less than 15 mm wide) bolting device, steel handles, pegs, stays of 300 mm long etc. complete including providing 12x12 mm square bars duly welded to steel frame at not more than 12 cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. a Openable

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with:b 5.5 mm thick glass panes

Providing polished VITRIFIED wall tiles of approved quality, size, shape and thickness not less than 8 mm on walls and skirting over cement mortar bed 10 mm thick in prop. 1:3 (1 cement: 3 coarse sand) including cutting where necessary finished with flush pointing with adhesive or white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. b Premium range

Providing and laying vitrified floor tiles in different sizes (thickness to be specif led by the manufacturer) with water absorption less than O.08°/o and conforming to ls:15622, of approved make, in all colours and shades laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc„ complete.

Applying priming coat: a With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)/ with ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: New work (two or more coats)

Finishing walls with Acrylic smooth exterior paint of required shade, including scaffolding: b)Painting wood work with Deluxe Mufti Surface Paint of required shade. Two or moi.e coats applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 Itr/10 sqm Of approved brand and manufacture

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding: c Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P, flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials Of standard make and mosquito proof coupling Of approved design complete, including painting Of fittings and brackets, cutting and making good the walls and floors wherever required:

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:

Supplying and fixing romng shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed togcther at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements tor inside and outside locking with push and pull operation complete, including the cost Of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire Of adequate strength conforming to ls:4454 - part 1 and M.S. top cover Of required thickness tor rolling shiitters.

Providing and fixing hand rail of approved size bywelding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.

CONSTRUCTION OF SEPTIC TANK

Earthwork in excavation by manual means up to a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal Of surplus earth with all lead and lifts as directed and specified for the following classification of soils.All kinds of soil (ordinary soil/ hard soil/ dense soil)

Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. b)Stone (i) 100 mm

Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). b)1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level: a)M15 or Prop. 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)

SHUTTERING/ FORMWORK Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge.Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick

7.2 Brick work with common burnt clay modular 1st class bricks in foundation and in plinth: a Cement mortar 1:4 (1 cement: 4 coarse sand)

Half brick masonry with common burnt clay (non modular) 1st class bricks in foundations and in plinth: b). Cement mortar 1:4 (1 cement: 4 coarse sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)

Supplying, fitting and fixing in position reinforcement bars upto 1stfloor level, conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required)

Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.

INTERNAL ELECTRIFICATION

Wiring in looping system with copper PVC cable 250/440 volt grade of size 1.5 sqmm of approved quality using PVC casing capping incluiding 5 amperes switch Indian best quality ceiling rose etc. capable to a highest point. (a) Long point wiring upto 10 mts

Wiring in looping system with copper PVC cable 250/440 volt grade of size 1.5 sqmm of approved quality using PVC casing capping incluiding 5 amperes switch Indian best quality ceiling rose etc. capable to a highest point. b) Medium Point wiring upto 6 meter

Wiring as in item No.1 to a Wall Light point (a) Long Point wiring upto 10 mts

Wiring as in item No.1 to complete to a light plug point when fixed elsewhere with continuous earth wire complete. (a) Long Point wiring upto 10 mts

Wiring as in item No.1 to complete to a light plug point when fixed elsewhere with continuous earth wire complete. (b) Medium Point upto 6 mts

Wiring as in item No.1 to a calling bell/ Bell indicator point control by 5 Amp Bell push (a) Long point wiring upto 10 mts

Drawing of Main and Sub-main line with DGSD approved VIR or PVC 250/440 Volt grade in PVC casing capping complete with all accessories. (a) With 2x2.5 Sq.mm Copper Conductor

Drawing of Main and Sub-main line with DGSD approved VIR or PVC 250/440 Volt grade in PVC casing capping complete with all accessories. (c) With 2x6 Sq.mm Copper Conductor

Supplying fitting and fixing of Distribution Board SPN DB's for MCB, Isolator, RCCB and RCBO C. IP 43 - #1k 09 with acrylic door d) 16 Way + 16 Module

Supplying fitting and fixing of DX3 Isolators for AC applications upto 125 A. A. Double Pole 240 V b) 40 Amp

Supplying & fixing of Load kontaket Miniature Circuit Breakers DX3 MCB's for AC application till 63 A A. Single Pole 240/410 V (a) 0.5-6 Amp (a) 6-32 Amp

Supplying & fixing of Load kontaket Miniature Circuit Breakers DX3 MCB's for AC application till 63 A A. Single Pole 240/410 V (a) 6-32 Amp

Wiring to a power plug as in item No.1 above with continous earth wire complete. (a) Long point wiring upto 10 mts

Wiring to a power plug as in item No.1 above with continous earth wire complete. b) Medium Point wiring upto 6 meter

Supplying, fitting and fixing of LED Retrofit Lamps or wall mounted with all necessary accessories (a) Regal batten for LED tube ( universal batten for T5 and T8 lamps) (i) 8 upto 1x22 W

Supplying fitting fixing complete polish brass bracket, 16 mm dia and 23 cm long with cast backplate and brass lamp holder with LED bulb surface or wall mounted with all necessary accessories. (a) Bulb (vii) 18W

Supplying, fixing, connecting, testing and commissioning of calling bell/Bell indicator type suitable for 230V as well as battery opertaed complete with all necessary accessories. e) Gong Bell

Supplying, fitting and fixing earthing with Copper earth plate 600mmx600mmx6mm thick including all acessories & providing masonry enclosure with cover plate having locking arrangement & watering pipe etc complete with charcoal salt coke as required. (a) GI Earth plate Electrode

Supplying, fixing connection testing of 8-SWG wire along the wall, columns etc with necessary clampin as required (a) copper wire

Supplying fitting & fixing complete Domestic Mini single phase 1PH Monobloc water pump set. (e) 1.5 HP (1.1 KW)

Supplying fitting and fixing of Single Phase Energy Meter of 230V/250V grade of 2.5-5, 5-10, 10-20, 20-40 Amp Capacity 2.5-5, 5-10, 10-20, 20-40 Amp

INTERNAL WATER SUPPLY

Providing and fixing G.I. pipes complcte with G.I. fittings including trenching and refilling etc. External work (iii) 25 mm diameter nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Change. External work (ii) 20 mm nominal outer diameter pipes

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings: (c)Angle back wash basin of size 600mm x 480mm

Providing and fixing mirror of superior glass ( of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing (c)Circular shape 450 mm dia

Providing and fixing toilet paper holder C.P brass

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to ls standards and weighing not less than 810 gins. a 15 mm nominal bore

Providing and fixing c.P. brass shower rose with 15 or 20 mm inlet: a 100 mm diameter

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ls:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. inlet:

Providing and fixing soil, waste and vent pipe a 100mm dia (i) Sand cast iron S&S pipe as per IS:1729

Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gins.

SHRI. PYNSHNGAINLANGKI DKHAR (BID ID -4500)

Hilarious Ymbon (BID ID -4510)

SHRI. BATSKHEM MYRCHIANG (BID ID -4556)