Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.5 LAccepted-AOC R O H NO 55 SEC D BHARAT NAGAR TALAB TILLO JAMMU 180002 | JAMMU | JAMMU AND KASHMIR | 180002 | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹24.5 L+₹2.4 L (10.8%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 bidder | |
| 3 | L3₹27.8 L+₹5.8 L (26.1%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 bidder |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
20 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 862 EWS
GE 862 EWS PIN-913862 C/o 56 APO
Rewiring/Repairs to internal electric wiring distribution boards fitting/fixtures and connected works and repair/replacement of sub main main switches service wire and cable building panels/DBs at Zone A under GE 862 EWS.
2022_MES_531308_1
GER-23/2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE 862 EWS
As per tender documents
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹88,000
Yes
12 Sept 2022
16 Jun 2022
22 Jul 2022
17 Jun 2022
20 Jul 2022
30 Jun 2022
Amount
Taking down carefully copper/ aluminum point wiring (light, fan, socket or power) complete, including all fittings such as switches, ceiling roses, pendants, regulators sockets etc.) removing material from the site and making good the disturbed surfaces of walls, floor or ceiling etc. to match with existing specifications complete all as specified and directed.
M&L for point wiring for one light point/fan point controlled by one-one way switch with 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor unsheathed in and including non metalic rigid PVC casing & caping of 25mm width (Medium grade double locking system) complete with all acessories including PVC sunk box ISI marked for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS, PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable as earth wire upto common earth and connected to earth dolly including making good the diturbed surfaces compete all as specified and directed. (Note:- Three run of copper conductor of required size and one run of casing capping measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth)
Description all as per srl item No. 2 above but for socket outlet 5 Amps on independent board complete all as specified and directed.
Description all as per srl item No. 2 above but for socket out 5 Amps on same board complete all as specified and directed.
Description all as per srl item No. 2 above but one bell point contrlled by one bell push complete all as specified and directed.
Description all as per srl item No. 2 above but for but for one light point controlled by two 2 way swtitched complete all as specified and directed.
Description all as per Serial item No 2 above but for one 3 pin 16 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistraind copper cable with 2.5 sqmm single core multistraind FRLS copper cable as earthling lead complete all as specified and directed.
S&F for switch piano flush type single pole one way 6 amps 240 volts complete all as specified and directed.
S&F for switch piano flush type single pole two way 6 amps 240 volts complete all as specified and directed.
S&F for bell push flush type single pole one way 6 amps 240 volts complete all as specified and directed.
S&F for switch socket combination 2 in 1, 5 pin, 6 amp flush type complete all as specified and directed.
S&F for switch socket combination 2 in 1, 5 pin, 16 amp flush type complete all as specified and directed.
S&F for fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically complete all as specified and directed.
S&F for modular switch 6 Amps, one way, one module complete all as specified and directed.
S&F for modular switch 6 Amps, two way, one module complete all as specified and directed.
S&F for modular switch bell push 6 amp, one module complete all as specified and directed.
S&F for modular switch 16 Amps, one way, one module complete all as specified and directed.
S&F for modular socket 6 Amps, 2/3 pin combined two module complete all as specified and directed.
S&F for modular socket 6/16 Amps, 6 pin combined two module complete all as specified and directed.
S&F for modular fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically complete all as specified and directed.
S&F for call bell AC, 230 volts, single pole, ding-dong sound type complete all as specified and directed.
S&F for ceiling rose 3 phase/PVC/polycarbonate isolated body surface bakelite 2 to 3 terminals complete all as specified and directed.
S&F for lamp holder insulated body PVC/ Polycabonate type with back plate suitable for batten/angular/pendent fittings complete as in repair all as specified and directed.
S&F for retrofit LED bulb 9 watts, 240 volts, 50Hz suitable for housing in pendent/batten/angular holder complete as in repair all as required at site or directed.
M&L for LED Tube light fitting, complete with 1x 20 watts, 220V, AC decorative box type with driver, holder in and including LED tube light connection complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and connector block etc and necessary fixing arrangement at any height complete as in repair all as specified and directed. (Make :- Havells cat No LHEXAPP7IN1W020 or equivalent in Crompton/Philips
M&L for 15 Watt LED recess/surface mounting 3000k/6000k light fitting LED backlit round or square (as reqd at site) down lighter with high effcient LEDs & glate free opal diffuser IP20, internally prewired, 230 V, complete with all accessories such as electronic driver, connector block etc and necessary fixing arrangement at any height and removing old unserviceable item with all connected accessories complete as in repair all as specified and directed. (Make Havells Cat Part No LHEAABP7IL1W018/LHEAABP71N1W018 or equivalant of Crompton Greaves /Philips) (Note: Material required for safety harness, ladder and T&P etc will be provided by the contractor without any extra cost).
S&F for LED tube light fittings 1x10 watts, complete with 2 feet decorative ultra slim near LED lighting fixture with co extruded polycarbonate body, environmental friendly energy effcient ready to use complete prewire and connecting electricaly using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete as in repair all as specified and directed. (Make :- Havells Cat part No LHEXACP7IN1W010 or equivalant of Crompton Greaves /Philips)
S&F for LED Tube light fitting, 1x 5 watts, complete with 1 feet Decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient ready to use pack complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core complete as in repair all as required at site or directed. (Make :- HavellsCat Part No LHEXACP71N1W005 or equivalent Crompton Greaves /Philips)
M&L for sub main wiring complete with 2 run of 10 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC conduit of size 25mm width or above as required at site and accessories such as tee, corners,overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 10 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including removing old unserviceable sub main wiring items complete all as specified and directed. (Note : - 02 run of 10 sqmm single core copper conductor cable and 01 run of 10 sqmm single core copper conductor and 01 run of PVC conduit shall be measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth).
M&L for sub main wiring complete with 2 run of 6 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC casing and caping of size 25mm width or above as required at site and accessories such as tee, corners,overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 6 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including removing old unserviceable sub main wiring items complete all as specified and directed. (Note : - 02 run of 6 sqmm single core copper conductor cable and 01 run of 6 sqmm single core copper conductor and 01 run of PVC casing and caping shall be measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth).
M&L for sub main wiring complete with 2 run of 4 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC casing and caping of size 25mm width or above as required at site and accessories such as tee, corners,overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 4 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including removing old unserviceable sub main wiring items complete all as specified and directed. (Note : - 02 run of 4 sqmm single core copper conductor cable and one run of 4 sqmm single core copper conductor cable and 01 run of PVC casing and caping shall be measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth).
S&F for MCB distribution board TPN 4 way, double door 415 volts duly painted with epoxy based powder coated painting suitable for mounting MCB TP/FP as incomer of rating upto 63 Amps, FP and MCB SP/TP as outgoings complete with 200 Amps rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gand plate with IP 42 protection including removing old unserviceable item complete as in repairs all as specified and directed. (Note:- MCBs will be measured separately.)
S&F for factory made sheet metal enclosure, double door, 415 volts, AC, TPN vertical distribution board 4 way painted with epoxy based powder coated suitable for mounting MCCB as incomer of rating upto 160 Amps, FP, rating upto 36 KA and MCB SP/TP as outoing and complete with including 200 Amps rated copper busbar, neutral bar, earth bar, conneting cable links with and including top bottom removeable gland plate complewte with IP 43 protection complete as in repair all as specified and directed. (Note:- MCBs will be measured separately.)
M&L for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair all as specified and directed. (Note:- MCBs will be measured separately.)
M&L for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair all as specified and directed. (Note:- MCBs will be measured separately.)
M&L for MCB single pole, 240 volts any rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
M&L for MCB single pole & neutral 240 volts any rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.
M&L for MCB FP 415 volts any rating 63 amps, with rupturing capacity 10 KA,including providing thimble for out going cables complete all as specified and directed.
M&L for MCCB FP 240 volts any rating from 63 Amp with ruptring capacity 16 KA, including providing thimble for out going cables complete as in repair all as specified and directed.
S&F for sheet metal enclosure with socket plug top and MCBs single pole with one MCB 240 volts 20 amps complete as in repair all as specified and directed.
S&F in repairs High efficacy 2'x2' recess/surface mounting LED flat panel light fittings 36W LED 3000k/6000k edge-lit luminaire with in and including LED lamp suitable for armstrong/grid ceiling complete for low ceiling applications complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete as in repair all as specified and directed. (Make :-Havells, Cat part PLUTONEO02X2PLR34WLED840S / Crompton Greaves, Cat No LCTLSNE-36-FO-CDL or equivalent of philips). (Note: Material required for safety harness, ladder and T&P etc will be provided by the contractor without any extra cost).
S&F for environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head 10 watt 6000 K inbuilt LED luminaire comprising of high brightness LEDs, IP54 protection including connecting electricaly using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete as in repair all as specified and directed. (Make :- Havells Cat part No HEXAFT10WLED857SSYMBOPC/Crompton Greaves Cat No. LBHP-10-CDL or equivalant of Philips)
S&F for post top lantern light fitting 35/40 watts with cast aluminium spigot lid cover and clear acrylic cover with IP65 protection complete with all accessories including fixing arrangement on top surface of boundary wall or on pillar by providing GI pipe of suitable size and length as per site requirement and making good the distrubed portion to match with existing surface complete as in repair all as specified and directed. (Make:- Havells, Cat Part No. CORALPT35WLED757PSYMTOPC/Crompton greaves, Cat No LPTM-40-CDL/LPTC-40-CDL or equivalent in Philips)
S&F for decorative LED Bollard light with opal diffuers and aluminium reflector outdoor type LED Bollard light 8W, IP 65 lihgt including all accessories and connecting materials such as clamps, brackets, nut bolts reducer etc with base PCC 1:2:4 fixed on wall/floor and making electrical connection with copper cable complete as in repair all as specified and directed. (Make :- Havells cat No CONEBLS8WLED830PSYMTOPC) or equivalent model of Crompton greavs/Philps)
Supply and fixing in replacement energy saving and environmental friendly long life LED bldg security light fitting made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistance of IK07 and electronic driver of 40W LED 5700K and making necessary connections including street light bracket made out of 25 mm dia GI tubing medium grade made to shape 1.2 mtr long duly painted with synthetic aluminium paint over a coat of primer incl MS clamps and back plates fabricated from steel section including nuts, bolts, washers 02 set complete as in repairs all as specified and directed. (Make:- Havells, Cat Part No. ENDURAPEARLNEOSL40WLED757PASYTOPC/Crompton greaves, Cat No FREEDOM NEO LSTS-40-CDL-M or equivalent in Philips)
S&F for LED driver suitable for high efficacy 2"x2" recess LED flat panel light 24W with due care and refixing the fitting after servicing including connecting electricaly using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete as in repair all as specified and directed.
S&F for LED tube rod 20 watts, 240 volts including removing old unserviceable item complete as in repair all as required at site or directed.
S&F for rigid non-metallic PVC conduit 32 mm dia (medium grade) including conduit accessories for encasing the cable from looping box to street light fittings on PCC poles/on wall surfaces as per site requirement with neccessary base saddles complete as in repair all as specified and directed.
Supply, Laying, connecting and testing in replacement of service cable of size 10 Sqmm 2 core 1100 volts grade heavy duty cable PVC insulated stranded alumn conductor, served with an inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire or drawn in and including medium grade non metallic rigid PVC conduit as per site requirement, flat or circular after taking down old unserviceable cable including others accessories complete all as specified and directed.
Supply, Laying, connecting and testing in replacement of service cable of size 06 Sqmm 2 core 1100 volts grade heavy duty cable PVC insulated stranded alumn conductor, served with an inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire or drawn in and including medium grade non metallic rigid PVC conduit as per site requirement, flat or circular after taking down old unserviceable cable including others accessories complete all as specified and directed.
Supply,laying, jointng and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 16 sqmm 2 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands nut bolts including removing old unserviceable cable complete all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushoining, concrete cable cover and protection GI pipe shall be measured and paid separetly and length of calbe shall be one length unless otherwise as directed by GE)
Supply,laying, jointng and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 10 sqmm 2 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands nut bolts including removing old unserviceable cable complete all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushoining, concrete cable cover and protection GI pipe shall be measured and paid separetly and length of calbe shall be one length unless otherwise as directed by GE)
Supply,laying, jointng and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 6 sqmm 2 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands nut bolts including removing old unserviceable cable complete all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushoining, concrete cable cover and protection GI pipe shall be measured and paid separetly and length of calbe shall be one length unless otherwise as directed by GE)
Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m depth for foundation etc and n. exc 10sqm on plan and getting out in any type of soil complete all as specified and as directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm (soil) thickness all as specified and directed.
Removing of excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
M&L for dry sand cushioning to underground cable, provided with a layer 8 cm thick before and 15 cm deep after laying and stretching jointing and testing the cable complete all as specified and as directed (Note: Punned thickness of sand shall be measured and paid).
Supplying and laying reinforced precast concrete cable cover, class LV, type 1 flat, size 250mm x 150mm x 40mm complete all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & RCC cover all as specified & shown in elect plate No. 3 of SSR part I of 2010 including testing on completion including taking down existing unserviceable earthing complete all as specified. (Note:-Earth strip and protection pipe upto board is included in the rate quoted)
M&L for PCC (1:3:6) (nominal mix) type C-2 (using 40mm graded crushed stone aggregate) as in mass concrete and making good the disturbed portion complete all as specified and directed.
S&F for cable tray 150mm wide x 100mm deep with coupler plates, hot dip galcanised with standerd slot pattern thick duly pre-treated with hot dip galvanised in seven tank process, perforated type including provision of fixing arrangment, nuts & bolts etc for proper securing to walls/beams or suspended from ceiling or along with road with mounted on 50x50x5mm size MS angle iron frame duly painted including PCC 1:2:4 type B1 (using 20mm graded stone aggregate) in foundation after taking down old unserviceable cable tray with fittings etc complete all as specified and directed.
S&F for cable tray 200mm wide x 50mm deep with coupler plates, hot dip galcanised with standerd slot pattern thick duly pre-treated with hot dip galvanised in seven tank process, perforated type including provision of fixing arrangment, nuts & bolts etc for proper securing to walls/beams or suspended from ceiling or along with road with mounted on 50x50x5mm size MS angle iron frame duly painted including PCC 1:2:4 type B1 (using 20mm graded stone aggregate) in foundation after taking down old unserviceable cable tray with fittings etc complete all as specified and directed.
Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.
M/S NARAYAN CONSTRUCTION
KRISHNA ENGINEERING ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .