Bulk water connection at Siddhi Apartment, S.C. Lane near Anjana Cinema, NSB Road, Raniganj under Asansol Municipal Corporation.3rd Call

Supplying, fitting and fixing in position G.1. pipes of TATA make for underground works with all necessary accessories, specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc.including cost of all materials. jointing materials cutting pipes,making threads,cutting trenches upto 1.5 metre below surface Schedule in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with 2 bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials. Payment for painting will be made seperately). 150 mm dia. medium quality

Supplying including cost of installation of C.I. Mechanical joint Tee as dimensionally described in IS:13382/2004. Each Tee consists of One C.I. Body, Two C.I. Follower Glands, SOR Two sealing Rubber Gaskets of EPDM quality (Conforming Branch Flange is drilled as per IS: 1538. The whole assembly is mechanically and hydraulically tested to provisions as laid down in IS: 13382/2004. 250 x 250 x 150

Supplying, fitting and fixing of C.I. Mechanical Compression flexible Collar Couplings suitable for C.I. Spun Pipes (as per IS: 1536) and D. I. Pipes (as per IS: 8329) complete with Sealing Rubber Gasket of EPDM quality (IS:5382/1985 Type, Coated). The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS: 1538. Fitting and fixing should be in proper position with proper care of main pipe line for leak proof condition. 150 mm dia

Cost iron double flanged manually operated sluice valves generally conforming to IS 14846: 2000, having four faces UD & and spindle nut of gunmetal, inside screw non-rising type , quality gunmetal/AISI 410 spindle: seat tested to 10kg/CM2 and body tested to 15kg/CM2, flanges flat faced and drilled to IS.: 1538: 1993. Painted black all over with asphalt base paint. Valves tested by closed end method. 150 mm dia

All types of C1 specials (viz. Bend, Tee, Teper, Tail piece, Collar, Bell mouth with Puddle coller ete. size conforming to IS specification 1538 1993) spigot b) Flanged socket 1) 80mm to 300mm

Sluice valve chamber with C.I. heavy cover with locking arrangement, (weight not less than 25 kg) (size of chamber 450 mm X 600 mm inside upto 900 mm depth) 250 mm thick cement brick walls (6:1), 150 mm thick crment concrete (6:3:1) bed with stone chips, 20 mm thick cement plaster (6:1) for inside wall and 15 mm thick cement plaster (4:1) for outer walls including rounding corners.

Supplying alling & laying G.1 Pipes of TATA make for underground workswith all necessary accessories, specials viz socket, bend, tee, union, cross, elbo, nipple, longserew, reducing, socket, reducing tee. short piece ete, fitted with holder bat clamps, including cutting pipes, making threds,fitting, fixing etc. complete in all respect including cost of all necessary fitting as required, jointing materials and two coats of painting with apporoved paint in any position above ground (payment will be made on the cenre line measurements of total pipe line including all specilas, separate payment will be made for accesories, specials, payment for painting will be made seperately) 40 mm dia medium quality

Supplying,fitting and fixing brass ferrule including connection with G.I.pipes of TATA make of following dia. and upto 450 mm long with screw.jamnut,sockets etc.,complete in all respect, including cutting trenches in all sorts of soil and filling up the trenches as per direction of the Engineer-in-Charge.

Supplying fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq.cm 40 mm dia

Dismantling all types of plain cement concrete works, stacking serviceable materials & removing rubbish as directed within a lead of 75 metres.

Labour for taking out old soling edging including removing debris (a) Single flat soling

Ordinary Cement Concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes. a) Pakur Variety

Filling in foundation or plinth by silver sand in layers not excluding 150 mm as directed and consolidation the same by through saturation with water & ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) (B) Do- by fine sand

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Rawaco ISI marked standard quality water flow meter inferential type magnetically coupled having hermetically sealed totaliser conforming to ISO-4046 Class-B 40 mm dia

GST 18% =Rs.

Labour Cess 1 % = Rs.

Please Enable Macros to View BoQ information