Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.7 LAccepted-AOC | L1 | Accepted-AOC aoc | |
| 2 | L2₹20.8 L+₹8,182.70 (0.39%)Rejected-Finance | L2 | Rejected-Finance 2nd lowest bid | |
| 3 | L3₹21.4 L+₹72,391.80 (3.49%)Rejected-Finance | L3 | Rejected-Finance 3rd lowest bid |
Tender Value
₹20.4 L
EMD Value
₹41,000
Closing Date
17 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAUGOR
GE SAUGOR
PROVN OF BATHROOMS, TOILETS AND URINALS AT ORS SINGLE ACCN OF 536 ASC BN UNDER GE SAUGOR
2022_MES_559793_1
GE/SGR/TOK-50 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
SAUGOR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER SAGAR
₹41,000
Yes
5 Dec 2022
26 Oct 2022
19 Nov 2022
26 Oct 2022
17 Nov 2022
5 Nov 2022
Amount
Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m deep in soft/loose soil and getting out complete all as specified and directed.
Excavating over areas not exc 1.5m deep & getting out in soft / loose soil complete all as specified and directed.
Excavating over areas exc 1.5m but not exc 3.0m deep & getting out in soft / loose soil complete all as specified and directed.
M&L for approved earth filling in floors or pavings, laid in layers not exc. 15 cm thick spread, levelled & rammed including watering complete all as specified and directed. .
Returning filling in including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.
M&L for broken stone or boulders hard core of gauge not exc 63mm deposited spread and levelled in layers not exc 15cm thick watered and rammed to a true surface complete all as specified and directed.
Removing excavated soil exc. 50m but not exc 100m & depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.
M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) mass concrete as in foundation filling and mass concrete complete all as specified and directed. .
M&L for reinforced cement concrete M-25 (design mix) (using 20 mm graded mechanically crushed stone aggregates) for foundation including rafts, footings, foundation beams, plinth beams and bases for columns complete all as specified and as directed.
M&L for reinforced cement concrete M-25 (design mix) (using 20mm graded mechanically crushed stone aggregates) as in columns, pillars, piers, post and struts complete all as specified and directed.
M&L for reinforced cement concrete M-25 (design mix) (using 20mm graded mechanically crushed stone aggregates) as in beams/ lintels over 1.5m span complete all as specified and directed.
M&L for reinforced cement concrete M-25 (design mix) (using 20mm graded mechanically crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.
M&L for mild steel "TMT" bars 10mm dia and over in reinforcement, cut to length, bent to shape required including crnaking, bending sprially for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with chips complete all as specified and directed.
M&L for mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed..
All as per Srl item 14 above but for 5mm dia and over upto 10 mm dia and including 10mm dia in stirrups, spacers and binders.
M&L for formwork to sides & soffits of plinth beam and sides of footings getting rough finished surfaces of concrete complete all as specified and directed..
M&L for formwork to sides of columns getting rough finished surfaces of concrete complete all as specified and directed..
M&L for formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Fair finished surfaces of concrete flat complete all as specified and directed..
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200m thick (Horizontal or sloping) Fair finished surfaces of concrete flat complete all as specified and directed..
M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed..
M&L for brickwork with subclass `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed...
M&L for rendering 15mm thick on fair face of brickwork in CM (1:6) finished even & smooth without using extra cement complete all as specified and directed...
M&L for rendering 5mm thick on fair faces of concrete surfaces in CM (1:3) as in ceiling complete all as specified and directed..
M&L for two coat cement plaster, first coat 10mm thick CM 1:6 and second coat cement plaster 5mm thick in CM 1:4 mixed with WPC finished even and smooth without using extra cement complete all as specified and directed..Note:-WPC shall be paid seperately under respective item
Supply only integral waterproofing compound complete all as specified and directed..
M&L for applying three coats of white wash on new ceiling surface including preparation of surface complete all as specified and directed..
M&L for applying two coats of acrylic distemper, white or tinted over a coat of wall primer and applying Birla / J. K. wall care white putty 1mm thick for levelling the surfaces on new wall surface including preparation of surface complete all as specified and directed...
M&L for preparation of new surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
M&L for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles laid over and including 15mm thick screed bed or beding layer in cement mortar complete all as specified and directed...
M&L for glazed ceramic tiles of size 600mmx 300mm x 7mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match laid over and including 15mm thick rendering in CM 1:4 complete all as specified and directed.
S&F GI tubing 15mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed
S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed
S&F CP bib taps 15mm bore, cast copper alloy Fancy type with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fancy type complete all as specified and directed...
S&F 15mm bore stop cock CP fancy type with butter fly handle, screwed down, high pressure for iron pipes or for unions (weight not less than 400gms) complete all as specified and directed...
S&F stop valves/angle valve 15mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed...
S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed..
S&F ball PVC valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed..
S&F CP pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed...
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position 1000 Ltrs Capacity complete all as specified and directed..
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed...
S&F PVC (SWR) pipes 110mm bore single socketed in any length with adhesive joints fixed to walls complete all as specified and directed..
S&F stack clamps made out of 50mm x 5mm flat iron & 16mm dia round iron stays. including bolts & nuts & securing ends of stays to wall or roof for 110 mm bore pipe complete all as specified and directed...
S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed...
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with adhesive joints laid in trenches or in floors complete all as specified and directed...
S&F PVC Bends any radius 110mm dia provided with access door complete all as specified and directed..
S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia complete all as specified and directed..
M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed...
S&F CP soap dish complete all as specified and directed...
S&F CP fancy type Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed...
S&F 75 mm size brass chormium plated shower rose with long body including fixing to steel pipe or union complete all as specified and directed..
S&F in repairs vitreous China bowl urinal angle back of size 430mm x 370mm x 340mm white (min.), with grating & union for discharge pipe including waste pipe (excluding flushing cistern, flush pipe ) complete all as specified and directed..
S&F vitreous China wash basin, white, flat back, size 550mmx400mm including 32 mm brass waste coupling,waste pipe and brackets complete all as specified and directed..
S&F vitreous China squatting pan, 'Orissa' pattern, size 580mm X 440mm white, with integral foot rests incl flush pipe, provn of lime concrete bedding complete all as specified and directed..
S&F PVC valveless, syphonic action type, flushing cistern (dual 5/10ltr capacity), low level, white, with intel, ball valve, float , handle and flush pipe 32mm bore and brackets complete all as specified and directed..
M&L for reinforced concrete pipes 150mm bore, class NP2 ,laid and jointed complete with socket and spigot joint and sealed complete all as specified and directed..
M&L for reinforced concrete pipes 200mm bore, class NP2 ,laid and jointed complete with socket and spigot joint and sealed complete all as specified and directed..
M&L for concrete bed of PCC 1:3:6 type C2 (using 40mm graded stone aggregates) for RCC pipe of 150mm bore, bedding and hanching completely after pipes are laid, jointed and tested complete all as specified and directed..
M&L for concrete bed of PCC 1:3:6 type C2 using 40mm graded stone aggregate for RCC pipe of 200mm bore, bedding and hanching completely after pipes are laid, jointed and tested complete all as specified and directed..
M&L for cutting chases, pinning in, in brick/ stone wall making good to facings where required and pointing in cement mortar 1:3 or P. C. C 1:2:4 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring insert sheet in wall. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.
S&F factory made Solid PVC prelam door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet single side prelam PVC sheet wood grain printed used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube complete all as specified and directed..
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 4mm thick moulded PVC sheet prelam on the front face & 4mm prelam PVC sheet on back face, supplying & fixing in frame centre core will be PVC battern complete all as specified and directed..
S&F mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm longincluding MS angle iron frame 40mm x40mmx 5mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and as directed. [Single shutters of approx width0.8 to 1.2 m and ht 1.9 to 2.10 M.]
M&L for two coats of synthetic enamal paint over a coat of red oxide primer on steel surfaces over 10cm width or girth incl preparation of new surfaces complete all as specified and directed....
S&F aluminium anodised barrel tower bolts of extruded section, length of bolt in 150 mm complete all as specified and directed..
S&F aluminium handles 150mm size, cast type, anodised complete all as specified and directed..
S&F butt hinges of 100 mm size, Medium weight, stainless steel and fixed complete all as specified and directed..,
S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed..
S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frusted glass and half portion will be fixed with louvers with 4mm thick frusted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }
M&L for precast reinforced cement concrete 1:2:4, type B1 (using 20mm graded stone aggregates) set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed...
M&L for PCC 1:2:4, type B1 (using 20mm graded stone aggregates) in surface channels and drains complete all as specified and directed..
M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregates) laid in panels incl finished even and smooth with using extra cement as in plinth protection incl necessary form work to edges and filling of joints with bituminous sealing compound complete all as specified and directed..
M&L for cement concrete 1:3:6, type C1 (using 20mm graded stone aggregates) as in coping, benching in man holes or similar work complete all as specified and directed..
M&L for machine pressed precast concrete interlocking paver block glossy finished, chemically treated any shape and size confirming to IS-15658-2006 size of 60 mm thickness, M-35 Grade with grey cement and pigment over complete all as specified and directed..
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed..
M&L for rendering 10mm thick on fair faces of roof concrete surfaces in CM (1:4) finished even & smooth with water proofing compound @ 3% by weight of cement applied over roof slab (WPC will be paid separetly under respective Item).
M&L for provn of water proffing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items and all as specified as under:-
(a) The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed. (b) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated. (c) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm (d) Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc. (e) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane (f) Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site .
M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FR insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm size cable as continuous earth lead complete all as specified and directed:-
For one light, fan point controlled by one switch
For one 5 Amp independent socket point controlled by one switch
For one 3 pin ,5 Amp socket point with other switch on the same board
All as per Srl item No 78 here in before but for power point wiring using with 2.5 sqmm PVC-FR insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed.
S&F modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed.
S&F socket modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed.
S&F switch modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed.
S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed.
S&F ceiling rose, surface backlit,three terminal complete all as specified and directed.
S&F testing and commissioning of MCB SP 6-32 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed.
S&F testing and commissioning of MCB SPN 32-63 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed.
S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 8 way, 230 V with 200 Amps rated bus bar of suitable size complete all as specified and directed. .
S&F LED TL fitting 20 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness complete all as specified and directed.
S&F box type LED optic fitting 1x9 Watt 2 feet box type complete all as specified and directed.
Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep metallic body with all accessories including making hole in stone /brick wall grouting &making good in all aspects complete all as specified and directed. Make -Bajaj frehee 300/CG Trans Air 12"/Havells Ventil Air-DS
S&F LED Bulk head designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed.
S&F electric water heater (Geyser) ISI marked 50 Ltrs capacity AC 230V, 5 star rating Branded heavy duty automatic cutoff and including electric connection lead of suitable size and length,pvc pipe and all accessories, grouting of nut bolt/fastner on wall and making good disturbed surface complete all as specified and directed.
Supplying and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 16 sqmm, 2 core complete all as specified and directed.
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth for laying of cable as the case may be and getting out in any type of soil complete all as specified and directed.
M&L for sand cushioning in trenches for the cable complete all as specified and directed.
Supply and laying kiln sub class 'B' bricks old size, laid in trenches for cable protection complete all as specified and directed.
S&F GI pipe light grade 40mm bore ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed.
M&L for provn of earthing complete with mild steel galvanized earth plate electrode 600x600x6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below normal GL) with top edge of plate not less than 1.5m below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of CI or steel incl excavation, PCC (1:3:6) type C-1 chamber with CI cover 10 mm thick, 15 mm dia light grade , GI protection pipe, funnel with wire mesh, watering pipe of size 20 mm dia, medium grade, lugs, main earthing lead upto main switch/DB incl charcoal dust, salt etc all as shown in electrical plate No. 3 of SSR Part-I 2009 specification complete all as specified and directed.
M&L for screwing existing steel tubing for altration or additions or lengthening screw on pipe to form conectors of any size GI tubing complete all as specified and directed
maharaja construction and suppliers
m/s mohansingh
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .