Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹8.3 Cr
EMD Value
₹16.5 L
Closing Date
20 Nov 2026, 3:00 pm4d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Deposit Work
P.WAY
14 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (For details refer tender documents)
Similar nature of work means: Execution of any P.way related works.
32 conditions · 2 needing a document upload
The tenderer(s) should submit the BID SECURITY in acceptable form i.e. only through net banking or e-payment gateway or submitted as Bank Guarantee Bond from a Scheduled Nationalized bank of India or as mentioned in the tender documents. The Bank Guarantee Bond shall be as per Annexure- VI(A) and shall be valid for a period of 90 days beyond the bid validity period.( NOTE: For submission of Bid Security in the form of Bank Guarantee, all the procedures mentioned at Para-5 Bid Security (3)(i) to (vii) mentioned in the tender document should invariably be followed.)
Whether History sheet of tenderers (Annexure-2 of Part-II of Tender documents) uploaded duly filled in with supportive documents.
Whether the details of facilities available vis-a-vis the requirements mentioned in STR in a tabular/narrative form if you are not on the approved list of RDSO, if required in the Annexed Document, is submitted.
Whether, EACH PAGE of the copy of documents/certificates in support of credential is self attested/digitally signed by tenderer/authorised representative with signature, stamp & date.
Whether all the documents related "Mandatory Requirement", as applicable and mentioned in the bid documents are enclosed with the tender.
Please submit bank details as per enclosed Annexure-12 of Part - II of Tender Documents or photo copy of a "Cancelled Cheque". (For details refer tender documents)
Please submit Certificate of Familiarisation as per Annexure-1 of Part-II of Tender Documents. (For details refer tender documents)
Please submit required details as required from Annexure 2 to 11 of Part-II of Tender documents duly filled in and signed. Supportive documents/separate sheet are to be submitted, if required. Annex-2: HISTORY SHEET OF THE TENDERER, Annex-3: TECHNICAL EIGIBILITY CRITERIA, Annex-4: DETAILS OF CONSTRUCTIONS MACHINERIES, TOOLS & PLANTS, VEHICLES ETC. AVAILABLE (ON HAND AND PROPOSED TO BE UTILISED, Annex-5: DETAILS OF TECHNICAL AND OTHER PERSONNELS AVAILABLE ON HAND & PROPOSED TO BE ENGAGED. Annex- 6: DETAILS OF WORKS COMPLETED DURING PREVIOUS THREE FINANCAIL YEARS & CURRENT YEAR, Annex-7: DETAILS OF WORKS ON HAND, Annex- 8: DECLARATION REGARDING ASSOCIATION OF RAILWAY OFFICER (S) WITH TENDERER(S), A n n e x - 9 : LIST OF COURT CASES, Annex-10: LIST OF ARBITRATION CASES. Annex- 11: BROAD PLAN FOR EXECUTION OF THIS WORK. (For details refer tender documents)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm/Partnership firm/Joint Venture/Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender . The tenderer(s) shall enclose the attested copies of the constitution of their concern and copy of PAN card along with the tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (for details refer tender documents) NOTE: Any document containing PAN number of the tenderer(s) shall also be considered in lieu of PAN card. However, if no document having mention of PAN number is uploaded, offer will be summarily rejected. (For details refer Tender documents)
For all tenders having advertised cost of Rs.10 lakh or above, the contractor shall have to submit the option to take payment from Railways through a letter of credit (LC) arrangement. The tenderer shall affirm having read over and agreed to the terms and conditions of the LC option. The option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, thereafter, during execution of contract. (The tenderer have to submit the option to take payment from Railway through a Letter of Credit arrangement) (For details refer Tender documents)
The list of personnel / organization on hand and proposed to be engaged for the tendered work. Similarly, list of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work. (For details refer tender documents)
Documents to be submitted as per Clause 14 of GCC-April 2022 in support of (a)Sole Proprietorship firm (b) HUF (c) Partnership Firm (d) Joint Venture (JV) (e) Company registered under Companies Act 2013 (f) LLP (Limited Liability Partnership) (g) Registered Society & Registered Trust. (for details refer tender documents) NOTE: Non submission of above documents will lead to summarily rejection of the offer.
Maintainance of track and other miscellaneous works at MCL siding, Talcher for a period of 3 years (MCL siding connecting Lingaraj silo with captive line(TLHR- NTPC) and rail connectivity between Deulbera siding with Lingaraj SILO and DB-2 siding at Lingaraj) under deposit scheme.
e-tender-CENTKUR-185-2026~ECOR
e-tender-CENTKUR-185-2026
Open
Works - General
36 Months
Unknown (Unspecified Location)
₹0
₹16.5 L
30 Oct 2026
30 Oct 2026
6 Nov 2026
167 items across 4 schedules · ₹7,97,32,015.28 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Using Soil Class SQ2 | cum | 200.00 | 441.75 | 88,350 |
| 2 | In all conditions and classifications of soil except rock | cum | 200.00 | 104.45 | 20,890 |
| 3 | Supplying and fixing HSFG bolts of any dia and any length with suitable nuts including DTI washers conforming to IRS-B1-2001 for bridges and s t e e l structures with contractors labour, tools and plants and lead and lift etc., complete. | Kg | 600.00 | 197.67 | 1,18,602 |
| 4 | Up to 40 m long rail panel | RM | 400.00 | 8.49 | 3,396 |
| 5 | For Casual/Scattered Rail Renewal work | RM | 850.00 | 33.06 | 28,101 |
| 6 | For Casual/Scattered Rail Renewal work | RM | 850.00 | 34.99 | 29,741.5 |
| 7 | For location of work not involving deep screening | Each | 1000.00 | 315.7 | 3,15,700 |
| 8 | For location of work involving deep screening (deep screening to be paid separately). | Each | 200.00 | 176.01 | 35,202 |
| 9 | Locations other than Ballasted Deck Bridge | Each | 1200.00 | 438.94 | 5,26,728 |
| 10 | Through Fitting Renewal (TFR) on PSC track, comprising of renewal of Grooved Rubber Pads, Liners and ERCs without damaging PSC sleepers. Scope includes removal of all fittings, cleaning of rail seat, rail flange at liner seats, and eye of Inserts with wire brushes and applying Grease Graphite Grade "O" (IS:408) to eye of insert and central leg of ERC with contractor's grease of Railway's specification, fixing all fittings in correct position and sealing liner edges with grease all complete including collection and stacking of released materials at nominated locations within SSE Jurisdiction as directed by Engineer-in- Charge. Note: All the fittings will be supplied at SSE/Stores/Depot. | Sleeper | 18260.00 | 24.75 | 4,51,935 |
| 11 | Lubrication of Elastic Rail Clips on PSC sleepers with contractor's grease, conforming to Railway's specifications, labour etc. complete as per procedure prescribed in latest edition of IRPWM. | ERC | 66440.00 | 2.96 | 1,96,662.4 |
| 12 | Removing seized ERC from SGCI inserts of existing track by using suitable approved chemicals and re-fixing after greasing of insert eye and ERC with Contractor's grease of specified quality as per provisions of IRPWM, as directed by Engineer in-charge. Note: 1.List of Seized ERC along with location shall be prepared after inspection of SSE/P.Way and marked prior to execution of this item. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if SGCI insert is broken or sleeper gets cracked in the process. | ERC | 6000.00 | 59.81 | 3,58,860 |
| 13 | By using Railway's Grease graphite | Each | 4000.00 | 28.99 | 1,15,960 |
| 14 | Renewal of seized Plate/Rail screws on PSC Sleepers by using gas or any approved methods, duly drilling holes in broken screw and removing existing screw pieces from the holes along with existing dowels and fixing new contractor's dowels (procured from RDSO approved sources) and grouting around dowel with Epoxy materials of approved specification and refixing new Railway's rail/Plate screws duly greasing the screw w i t h specified grease with all contractor's materials, consumables, tools & plants, labour with all lead, lift. Note: 1.Seized screws shall be identified and marked by JE/P.Way and verified at minimum SSE/P.Way In charge) level. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if sleeper gets damaged in the process. | Each | 1800.00 | 290.31 | 5,22,558 |
| 15 | Renewal of existing SEJ with improved SEJ with PSC sleepers under traffic block c o n d i t i o n s as per approved drawing including fixing of special size bearing plate, rubber pad and other sleeper / rail fittings, greasing to the fittings, leading rails, sleepers & fittings to site, leading and stacking of released materials within a lead of 250m, cutting of Rails, drilling of holes, fixing of related fittings, providing temporary connection with fishplates till welding of SEJ is done and sleepers shall be given initial packing to make track fit for 20KMPH speed. Note: (1) Rail cutting and hole drilling shall be paid separately. (2) One set comprise complete SEJ on both rails at SEJ. | Set | 8.00 | 7,899.44 | 63,195.52 |
| 16 | 1 in 8½ Turnout (Under Traffic Block) | Set | 4.00 | 29,930.6 | 1,19,722.4 |
| 17 | 1 in 8½ Turnout | Set | 2.00 | 37,202.69 | 74,405.38 |
| 18 | 1 in 12 Turnout | Set | 1.00 | 41,696.83 | 41,696.83 |
| 19 | 1 in 8½ Turnouts | Set | 2.00 | 46,808.54 | 93,617.08 |
| 20 | 1 in 12 Turnouts | Set | 1.00 | 53,791.67 | 53,791.67 |
| 21 | 1 in 8½ Turnout | Set | 4.00 | 3,557.04 | 14,228.16 |
| 22 | 1 in 12 Turnout | Set | 2.00 | 3,892.09 | 7,784.18 |
| 23 | For 1 in 12 Turnouts | Set | 2.00 | 28,544.23 | 57,088.46 |
| 24 | For 1 in 8.5 Turnouts | Set | 11.00 | 22,835.38 | 2,51,189.18 |
| 25 | Depth of 250 mm below bottom of sleeper - For Plain Track : | TRM | 33000.00 | 478.48 | 1,57,89,840 |
| 26 | Depth of 250 mm below bottom of sleeper for Turnouts | TRM | 66.00 | 765.57 | 50,527.62 |
| 27 | Lifting and packing for regrading the existing PSC sleeper track to required height / level in stages not exceeding 75mm or part thereof at a time, providing permissible ramp for the track, insertion of moorum / sand / stone ballast uniformly under the existing track and placing the same to safe approved gradient, gauge, cushion including levelling and one round of through packing to allow train movement at restricted speed of 30 kmph for a specified length with all leads & lifts and fixing, marking, painting rail level pegs at every 30m interval. Note: Lifting of track shall be done in stages as per procedure prescribed in latest edition of IRPWM to get the proposed final level as per approved working profile, as directed by Engineer in- charge. | TRM | 66000.00 | 165.82 | 1,09,44,120 |
| 28 | Extra for additional lift over 75mm for every 50mm lift or part thereof up to 275mm for item nos. 083010 for each TRM. | TRM | 22000.00 | 25.63 | 5,63,860 |
| 29 | For 60 Kg Rail, Single shot crucible fitted with Automatic Tapping Thimble , 3 pieces Mould (Zircon washed) and Compressed Air Petrol/LPG pre heating technique | Each | 650.00 | 1,882.35 | 12,23,527.5 |
| 30 | For 60 Kg Rail, Single shot crucible fitted with Automatic Tapping Thimble, 3 pieces Mould (Zircon washed) and Compressed Air Petrol/LPG pre heating technique | Each | 100.00 | 1,070.16 | 1,07,016 |
| 31 | Using H3C electrodes | Each | 108.00 | 8,524.35 | 9,20,629.8 |
| 32 | Using H3C electrodes | Each | 6.00 | 9,875.87 | 59,255.22 |
| 33 | Using H3C electrodes | Each | 138.00 | 2,668.27 | 3,68,221.26 |
| 34 | Using H3C electrodes | Each | 12.00 | 3,352.73 | 40,232.76 |
| 35 | For PSC sleeper Track with Sleeper Density of 1540 Sleepers/Km or more | TRM | 132000.00 | 96.79 | 1,27,76,280 |
| 36 | For PSC sleeper Track with Sleeper Density of 1540 sleepers/Km or more | TRM | 99000.00 | 164.96 | 1,63,31,040 |
| 37 | Without Rail tensor | TRM | 4000.00 | 33.95 | 1,35,800 |
| 38 | With 4 bolts | Set | 750.00 | 113.94 | 85,455 |
| 39 | Replacing existing glued joint rail with cut rails or with glued joint rail or insertion of glued joint by cutting existing track under traffic condition by cutting rails, refixing with all rail sleeper fastenings and providing required gaps for carrying out welding as an alternative to drilling holes or joining rails with fish plates duly drilling holes as required including stacking of released material and as directed by engineer in-charge. Note: (1) Drilling holes & rail cutting will be paid separately. (2) Transportation of materials to the site of work from supply points, if more than 250m, shall be paid separately. | Each | 12.00 | 1,685.87 | 20,230.44 |
| 40 | Removing weeds & bushes in ballast section and cess up to 3.95m from centre line of track in mid section & station yard, as specified by Engineer in-charge including disposal of branches, bushes outside cess/yard. | TRM | 44000.00 | 13.8 | 6,07,200 |
| 41 | For 60 Kg Rails | TRM | 100.00 | 86.16 | 8,616 |
| 42 | Kilometre & Gradient post | Each | 50.00 | 92.59 | 4,629.5 |
| 43 | LWR / SEJ Board | Each | 20.00 | 167.1 | 3,342 |
| 44 | Level Crossing Boards including Road Sign Boards | Each | 4.00 | 194.4 | 777.6 |
| 45 | Level Crossing Post | Each | 4.00 | 184.83 | 739.32 |
| 46 | Curve Post | Each | 20.00 | 98.57 | 1,971.4 |
| 47 | Curve Board | Each | 40.00 | 167.1 | 6,684 |
| 48 | 60 Kg - 110/90 UTS - Outside Track | Each | 400.00 | 303.09 | 1,21,236 |
| 49 | 52 Kg - 90 UTS - Outside Track | Each | 40.00 | 277.35 | 11,094 |
| 50 | 60 Kg - 110/90 UTS - On Running Line | Each | 400.00 | 384.24 | 1,53,696 |
| 51 | Outside Track | Each | 500.00 | 52.94 | 26,470 |
| 52 | On Running Line | Each | 1000.00 | 68.3 | 68,300 |
| 53 | I n Wagon where mechanical handling is possible and traffic block is not required or in Truck/trailer. | MT | 250.00 | 132.13 | 33,032.5 |
| 54 | I n Wagon where mechanical handling is possible and traffic block is not required or in Truck/trailer. | MT | 250.00 | 128.97 | 32,242.5 |
| 55 | For lead up to 500 metre. | MT | 140.00 | 356.93 | 49,970.2 |
| 56 | For lead beyond 500 metre and up to 1 Km. | MT | 50.00 | 459.92 | 22,996 |
| 57 | Extra to Items no. 171032 for lead beyond 1 Km for every subsequent Km or part thereof and up to 10 Km | MT | 30.00 | 54.69 | 1,640.7 |
| 58 | From wagons during period of traffic block where handling by mechanical means is not possible | MT | 250.00 | 163.53 | 40,882.5 |
| 59 | I n Wagon where mechanical handling is possible and traffic block is not required or in Truck / trailer | MT | 2100.00 | 104.39 | 2,19,219 |
| 60 | I n Wagon/Truck / trailer where mechanical handling is possible and traffic block is not required. | MT | 250.00 | 128.53 | 32,132.5 |
| 61 | For lead up to 500 metres | MT | 800.00 | 277.85 | 2,22,280 |
| 62 | For lead beyond 500 metre and up to 1 Km | MT | 200.00 | 411.36 | 82,272 |
| 63 | Extra to Items no. 172032 for lead beyond 1 Km for every subsequent Km or part thereof and up to 10 Km | MT | 100.00 | 42.66 | 4,266 |
| 64 | Lead up to 5 Km | MT | 400.00 | 164.53 | 65,812 |
| 65 | Lead beyond 5 Km and up to 10 km | MT | 400.00 | 208.01 | 83,204 |
| 66 | Lead beyond 10 Km and up to 20 km | MT | 400.00 | 266.76 | 1,06,704 |
| 67 | Lead beyond 20 Km and up to 30 km | MT | 400.00 | 337.79 | 1,35,116 |
| 68 | Lead beyond 30 Km and up to 50 km | MT | 400.00 | 435.73 | 1,74,292 |
| 69 | Lead beyond 50 Km and up to 100 Km | MT | 400.00 | 647.57 | 2,59,028 |
| 70 | Lead beyond 100 Km and up to 150 Km | MT | 400.00 | 966.36 | 3,86,544 |
| 71 | Extra for every Km per MT beyond 150 Km over item no. 172047 | MT-Km | 400.00 | 3.27 | 1,308 |
| 72 | Lead up to 5 Km | MT | 400.00 | 58.17 | 23,268 |
| 73 | Lead beyond 5 Km and up to 10 km | MT | 400.00 | 101.64 | 40,656 |
| 74 | Lead beyond 10 Km and up to 20 km | MT | 400.00 | 160.39 | 64,156 |
| 75 | Lead beyond 20 Km and up to 30 km | MT | 400.00 | 231.42 | 92,568 |
| 76 | Lead beyond 30 Km and up to 50 km | MT | 400.00 | 329.36 | 1,31,744 |
| 77 | Lead beyond 50 Km and up to 100 Km | MT | 400.00 | 541.2 | 2,16,480 |
| 78 | Lead beyond 100 Km and up to 150 Km | MT | 400.00 | 859.99 | 3,43,996 |
| 79 | Extra for every Km per MT beyond 150 Km over item no. 172057 | MT-Km | 400.00 | 3.27 | 1,308 |
| 80 | From Truck / Trailer | MT | 250.00 | 93.56 | 23,390 |
| 81 | From Truck / Trailer | MT | 250.00 | 99.47 | 24,867.5 |
| 82 | From Truck / Trailer | MT | 250.00 | 136.19 | 34,047.5 |
| 83 | Rails, switches, crossings, SEJ, Glued Joints, Check Rails etc. | MT | 250.00 | 382.22 | 95,555 |
| 84 | All type of PSC sleepers | MT | 350.00 | 414.79 | 1,45,176.5 |
| 85 | P.Way fittings of all types and other similar loose items | MT | 130.00 | 358.83 | 46,647.9 |
| 86 | Level crossings with concrete blocks road surface | Sqm | 540.00 | 485.14 | 2,61,975.6 |
| 87 | Above 5 metre width of level crossing | Each | 4.00 | 15,201.57 | 60,806.28 |
| 88 | 120mm thick blocks of M-40 grade for heavy traffic. | Sqm | 320.00 | 1,785.93 | 5,71,497.6 |
| 89 | Boards with single post | Each | 40.00 | 162.94 | 6,517.6 |
| 90 | Fabricating of check rails of 52Kg and 90R sections for providing to curves by cutting web of rail horizontally by gas, grinding for smoothening the cut edge and drilling of parabolic shaped holes to the web of check rails as per drawing and specification and as per directions of engineer in-charge with all contractor's labour, tools and materials complete. Note: 1. Rails shall be supplied by Railways 2.The both ends of head of check rails are to bent/cut as per drawing. 3. The released rail scrap shall be stacked neatly with in a lead of 500m. 4.Drilling of holes shall be paid under relevant item. | RM | 450.00 | 255.91 | 1,15,159.5 |
| 91 | Fixing of check rails on curves on track of all rail sections as per drawing and to correct alignment and level with Railways fastenings including leading of rails and fittings, crossing of tracks, greasing of plate screws with approved grease etc., as per drawing and directions of Engineer in charge with all contractors labour, tools, plants, machinery, consumables etc., complete. Note: Required P.Way fittings will be supplied at SSE/P.Way stores. | RM | 4200.00 | 64.26 | 2,69,892 |
| 92 | JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity | Hour | 1500.00 | 802.46 | 12,03,690 |
| 93 | Hydra or similar tyre mounted Pick-n-Carry crane of 12T capacity for misc. works of handling of material | Hour | 200.00 | 1,134.57 | 2,26,914 |
| 94 | Tractor with Trolley for local transportation or other misc. works. | Hour | 300.00 | 356.23 | 1,06,869 |
| Schedule total | ₹7,00,80,320.06 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderCondition-GCC25.05.2026.pdf
ATTACHMENT
SpecialConditionsforP-WayRelatedWorks.pdf
ATTACHMENT
Annexure-A.pdf
ATTACHMENT
Annexure-B.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .