Erode Zone Tiruppur District Sangaramanallur Town panchayat 15 th FINANCE COMMISSION TIED 2nd INSTALMENT 2025 2026 Construction of 60000 Litres OHT in Ward No 15 Kuppampalayam in Sangaramanallur Town Panchayat

Amount

Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in Hand Stiff clay, Stiff black cotton, hard red earth, shales, murram, gravel, stone earth mixed with small size boulders SS.20B etc, complete as per Standard specification. a)In ordinary soril

b) In soft desintegrated rock

Plain Cement Concrete 1:4:8 (One cement Four M.sand and Eight aggregate) using 40mm gauge hard broken granite jelly for foundation including cost and conveyance of all materials including labour charge for mixing laying curing, watering if found necessary and laid in layers and not more than 30 cm thick etc., as per standard specification.

Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. a) For items 1.50m to 4.50m Below G.L

b) For items 0m to 1.50m Below G.L

c) For items Above G.L And upto 4.50m

d) For items Above 4.51m to 7.32 From G.L

e) For items Above 7.33m to 10.89 From G.L

f) For items Above 10.90m to 14.64 From G.L

g) For items above 14.65m to 18.39m From G.L

Refilling with excavated earth other then sand Complying With Standard Specifications including all labour charges etc.completed

Supplying and erecting steel centering for sides and sophist of including necessary supports and shuttering to the required height for RCC items using MS sheets or suitable size of BG10 stiffened with welded MS angles of size 25mm x 25mm x 3mm of boarding. Laid over silver oak joints of size 10cm x 6.5cm spaced at 90cm center to center and supported by casuarinas props of 10cm to 13cm dia spaced at75cm centre to centre complying with standard specifications etc., completed. A. Plane Surface aa)Below G.L

ab) 0 to 3.31m

ac) 3.31 to 4.30m

ad)6.31 to 7.30m

ae)10.31 to 11.30m

af)11.31 to 12.30m

B. Curved Surface ba) 0 to 3.30m

bb) 3.31 to 4.30m

C.Square Columns ca) Below G.L

cb) Above GL upto 3.30M

cc) 3.31 to 4.30 m

cd) 4.31 to 5.30m

ce) 5.31 to 6.30m

cf) 6.31 to 7.30 m

cg) 7.31 to 8.30m

ch) 8.31 to 9.30m

ci) 9.31 to 10.30m

cj) 10.31 to 11.30 m

Supplying fabricating and placing in position of TMT steel rods for reinforcement including the cost of steel and binding wire etc., complete and as directed by Departmental officers.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Providing and fixing of RCC inner access ladder with RCC 1:1.5 :3 using 20mm HBG stone for OHT including casting of reinforcement, placing grill in positional, centering shuttering charges, mixing concrete curing etc., to required height

Providing C I manhole cover of size 0.60X0.60 and including all etc.,

Supplying and delivery of PVC/GI pipe and specials using ISI including cost and conveyance of all charges etc., complete complying with standard specification. A)80mm dia GI pipe

b) 65mm dia GI pipe

c) 80mm dia G.M Valve ISI

Laying and Jointing Charegs of PVC/ GI pipes with Specials in position including cost and conveyance of all charges etc., complete complying with standard specification. A) 80mm dia GI pipe

b) 65mm dia GI pipe

Supply and fixing of M.S Grills with Doors , Windows and Staircash with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

anandhi (BID ID -1474682)