Selection of An Agency for Implementing AI Powered Digital Experience Centre in CBSE

Works for execution of strategy room/ Digital Experience Centre/ Command Control Centre

Provision and fixing of framework. The framework to be made out of suitable MS sections for verticals, horizontals, and supports to achieve a rigid and stable framework as per design. The entire MS structure shall be treated with corrosion protection. The MS Framework elevation area shall be measured for payment.

Provision and fixing of 18mm HDHMR panel over existing (straight/curved) framework including any moulding/patterns. The cost includes labour, materials, wastages, hardware, lead, lifts, cutting to all shapes, fixing at all loations and levels etc. complete as per the instructions of Engineer-in charge.

Provision and applying of high quality vinyl prints on existing surfaces (flat/curved). The vinyl graphics will be printed with high quality UV printing technology on self adhesive media of approved make (3M or equivalent) with approved matte lamination/ overlaminate to protect againts scratches and general wear and tear. The surface to be treated with putty and paint as required to achieve a smooth finish as per the directions of Engineer-in-charge. The rate includes all material, labour, tools, scaffolding, plants, equipments, accessories, safety harness, etc and nothing should be paid extra on this item.

Provision and fixing of acoustically transparent screen fabric with eyelets at all sides stretched with cotton twine and fixed to framework with acoustic treatment and covering the eyelets with edge profile in paint/laminate finish. The framework for projection screen to be made out of MS CRC pipe of appropriate size and thickness braced to floor/wall/ceiling with hooks provided at regular intervals. Item to include all necessary equipments and hardware required to achieve the desired effect as per satisfaction of the Engineer-in-charge.

SITC of DLP LASER Phosphor Multimedia Projection system having minimum 10000 Lumens 20000 hours illumination life 1920 x 1200 WUXGA Native Resolution 4000000:1 Contrast Ratio inputs: HDBaseTmotorised focus and zoomHDMI DVI-D 3D at 120Hz along with projector mountin bracket etc. complete with suitable short throw lens with vertical and horizontal offset and installation as per the site requirement.

Supply Installation Testing & Commissioning of CPU with following specification: Processor intel core i7, 12th Generation, 500GB SSD, 16GB DDR4 RAM & 8 GB GPU with required operating system to drive required HDMI output

Projection Mapping of the projectors in all multiprojector setups. Quantity to be measured per projector in the setup.

Supply, Installation, Integration, Testing, Commissioning of projection mapping license. Quantity to be measured per license per server.

Design, development, integration, testing and deployment of software to play content on LED/TV/SCREENS/HOLOFAN/PROJECTOR. Quantity to be measured per server.

Provision and fixing of artistic installation as per design. The installation comprises of a clear glass/acrylic/other suitable transparent material dome fixed on a conical base. The centre to include a backlit box and rotating miniature models and replicas as per design. The installation is to be finished in various materials like paint, vinyl, metallic coatings, paper, etc to achieve the desired look as per design. The item to include all necessary hardware, strcutural support and accessories to make it a freestanding installation including taking necessary supports from floor. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge. Overall Size (width x depth x height) : 1500mm x 1500mm x 1200mm

Provision, fixing and application of 12.5 mm thick tapered edge glass reinforced gypsum board ceiling on appropriate GI framework as per design. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of Engineer-in-charge.

Providing and laying of Italian Marble 16mm to 18mm thk of approved colour shade in flooring and skirting & size in slabs/ bands/ strips, laid on min 12mm thick laying adhesive. The floor shall be uniformly levelled through cement mortar (1 cement : 4 coarse sand) screeding before applying the adhesive. The joints shall be filled with matching colour pigment, to match the shade of stone including grinding, cleaning, rubbing and diamond polishing with sealer, applying wax etc. all as per satisfaction of Engineer-in-charge.

Creating AV content including video composition of archival videos including script, audio and video.

Creating 2D Animation including script, audio and video.

Creating 3D Animation including script, audio and video.

Research, development, scripting, proofreading and composition of content for static media.

Supply, installation, testing, and commissioning of a High quality Show Audio sound system. All necessary hardware and accessories should be included as per the design and drawings.

Provision and fixing of framework. The framework to be made out of suitable MS sections for verticals, horizontals, and supports to achieve a rigid and stable framework as per design. The entire MS structure shall be treated with corrosion protection. The MS Framework elevation area shall be measured for payment.

Supplying, Installation, testing & commissioning of 55 inch frame TV, Resolution 3,840 x 2,160 (4K), Brightness - 250 nits or Higher with extension to connect display interface to the server.

Provision and fixing of a sleek cover to conceal a 55" frame tv and its mounts and accessories. The frame to be made out of 12-18mm thick HDHMR and finished in PU paint of approved make and shade. Item to include necessary conduiting and hardware required to fix the frame to ceiling complete as per the satisfaction of Engineer-in-charge.

Supply, installation, testing & commissioning of NUC with following specification: Processor intel core i7, Latest Generation, 500GB SSD, 16GB DDR4 RAM with required operating system to drive required HDMI output.

Design, development, integration, testing and deployment of software to play content on LED/TV/SCREENS/HOLOFAN/PROJECTOR. Quantity to be measured per server.

Provision and fixing of bench with soft fabric/Leatherite cushioning in specified shape and size fabricated in HDHMR / HDF / Flexi Ply /Fibre or any as suitable with cushoning and cover and with appropriate finish in PU Paint of approriate colour/shade to meet the design intent, with necessary support structure and framing to take the intended load and achieve strudiness. Design complete as per satisfaction of Engineer-in-charge. Dimensions may vary as per design requirements. Overall Size (length x width x height) : 1950mm x 600mm x 450mm

Provision and fixing of custom made dome shaped ceiling element as per design. The ceiling dome shall be made out of 12mm thick HDHMR/Flexiply panels and finished in textured emulsion paint of approved make and shade. Item to include necessary hardware and accessories including fixing to existing ceiling grid to achieve the desired look as per satisfaction of engineeer in charge. Dia : 3600mm Height : 600mm

Provision, fixing and application of 12.5 mm thick tapered edge glass reinforced gypsum board ceiling on appropriate GI framework as per design. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of Engineer-in-charge.

Providing and laying of Italian Marble 16mm to 18mm thk of approved colour shade in flooring and skirting & size in slabs/ bands/ strips, laid on min 12mm thick laying adhesive. The floor shall be uniformly levelled through cement mortar (1 cement : 4 coarse sand) screeding before applying the adhesive. The joints shall be filled with matching colour pigment, to match the shade of stone including grinding, cleaning, rubbing and diamond polishing with sealer, applying wax etc. all as per satisfaction of Engineer-in-charge.

Creating AV content including video composition of archival videos including script, audio and video.

Creating 2D Animation including script, audio and video.

Creating 3D Animation including script, audio and video.

Research, development, scripting, proofreading and composition of content for static media.

Providing and fixing of counter of size 3000mm(L)x600mm(W)x750mm(H) made out of 19mm thick ply, finished in 1.5mm thk laminate from all the exposed sides top to be finished in 6mm thk solid acrylic surface, edges to be finished with edge bending tape of similar shade. The item shall be Inclusive of all hardwares and storage pedestal as specified in design.

Provision of fixing of Revolving Chair with medium backrest and Adjustable Seat Height, Armrest, Locking Mechanism, Recline, Seat Lock, Swivel, Wheels as per satisfaction of Engineer in Charge.

Providing and fixing of storage cabinet of size 1050mm length × 450mm Depth × 2100mm height, made from 18mm thick HDHMR / BWP plywood (as specified) for both carcass and shutters. All exposed surfaces to be finished in 1.0mm / 1.5mm thick laminate in approved design and shade. The cabinet shall include adjustable shelves, soft-close hinges, and all necessary hardware of approved make. All visible edges to be finished with matching PVC edge banding. The cabinet shall be fixed with proper support, aligned accurately, and completed in all respects to the satisfaction of the Engineer-in-Charge.

Supply Installation Testing & Commissioning of Computer setup including CPU, i7 processor, Monitor of 22 inch, Full HD, wireless keyboard and mouse with required operating system.

Provision and fixing of a double-sided partition wall of specified depth, which can be flat or curved, constructed using industrial-grade anti-termite HDHMR (High Density High Moisture Resistance) board. The partition wall shall be supported by MS CRC PIPE of the required depth, and include wood batten and wood frame inside for erection and support as per the design requirements. The wall should be finished with paint and include all necessary provisions for electrical and data installations. The work shall be completed to the satisfaction of the Engineer in Charge. Measurement shall be taken from one side only

Provision, fixing and application of 12.5 mm thick tapered edge glass reinforced gypsum board ceiling on appropriate GI framework as per design. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge. Actual surface area to be measured for payment.

Providing and laying Commercial Carpet flooring in approved shade as per drawing.. The cost shall be all inclusive of transportation, loading, unloading etc at site and wastage etc. Actual laid area and attic stock will be measured and paid. Preparing the surface like deep cleaning of floor and removing of loose particle and Laying of Carpet tiles including necessary pre-applied or post applied adhesives .

Provision and fixing of miscellaneous theme based interior works items Including cloak room with furniture, wooden/metal work, cladding, surface finishing and other detailing work as per design and approved specification. Item to include floor cleaning, repair work etc.

Content Development for static graphic and print media.

Supply, installation, testing, and commissioning of 9-12w recessed LED COB downlight with aluminium housing, suitable for 220–240V AC operation, complete with all accessories as required.

SITC of Aluminium track for mounting spot lights with supproting SS suspension threads. The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope.

Supply, installation, testing, and commissioning of track-mounted 3W–15W LED spotlight with standard optics, fanless heat sink cooling, high power factor (>0.9), and dimming support, including track, electrical connections, accessories, and all labour, tools, and equipment required for installation, complete as per approved design and direction of Engineer-in-Charge.

Provision and fixing of Fire exitinguisher CO2 type (4.5 kG) as per the requirement.

Providing & Fixing of Projection screen on MS CRC structure with hooks at regular intervals. Item to include Acoustically Transparent Screen fabric installed on front with eyelets at all sides to be stretched with cotton twine and fixed to the MS framework.

SITC of 1-chip DLP LASER Phosphor Multimedia Projection system having 9600 Lumens 20000 hours lamp life 1920 x 1200 WUXGA Native Resolution Inbuilt blending and warping with automatic caliberation software 3D ready 3000000:1 Contrast Ratio inputs: HDBaseTHDMI2.0 DVI-D Active 3D Motorised zoom and focus alongwith 0.65-0.75 lens & projector mountin bracket etc. power consumption shuld not be more than 660Wcomplete with installation as per the site requirement.

Supply Installation Testing & Commissioning of CPU with following specification: Processor intel core i7, 12th Generation, 500GB SSD, 16GB DDR4 RAM & 8 GB GPU to drive required HDMI output with required operating system.

Supply, Installation, Integration, Testing, Commissioning of screen mapping license.

Projection Mapping of the projectors in all projector setups. Quantity to be measured per projector in the setup.

Development, Installation, Integration, Testing, Commissioning of SOFTWARE VOL software. Quantity to be measured per interface/exhibit

3D Animation content at least 50% of the duration, rest 2D animation, motor graphics, composition wherever required

Provision and fixing of Round Stool Seating of 350mm dia and 450mm height with soft leather cushioning on top fabricated in HDHMR / HDF / Flexi Ply /Fibre or any as suitable with cushoning and cover and with appropriate finish in fabric of approriate colour/shade to meet the design intent, with necessary support structure and framing to take the intended load and achieve strudiness. Design complete as per satisfaction of Engineer in Charge. Dimensions may vary as per design requirements.

Providing and fixing of 12-18mm thick HDHMR panel cladding on straight/curved ms framework out of 50mm x 50mm sections and appropriate gauge at 600mm vertically/horizontally spacing and as where required for proper completion of job fixed to the wall by means of raul plugs/screws . The cost includes labour, materials, wastages, hardware, lead, lifts, cutting to all shapes, fixing at all loations and levels etc. complete as per the instructions of Engineer-in charge.

Providing and fixing Metal Grid Ceiling system using pre-coated aluminum panels laid over suspended GI grid framework with main runners, cross tees, wall angles, hangers, and all required accessories, including necessary cutouts, edge trims, and installation, complete as per approved drawings and direction of Engineer-in-Charge.

Provision, fixing and application of 12.5 mm thick tapered edge glass reinforced gypsum board ceiling on appropriate GI framework as per design. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge. Actual surface area to be measured for payment.

Providing and laying Commercial Carpet flooring in approved shade as per drawing.. The cost shall be all inclusive of transportation, loading, unloading etc at site and wastage etc. Actual laid area and attic stock will be measured and paid. Preparing the surface like deep cleaning of floor and removing of loose particle and Laying of Carpet tiles including necessary pre-applied or post applied adhesives .

Provision and fixing of miscellaneous theme based interior works items Including cloak room with furniture, wooden/metal work, cladding, surface finishing and other detailing work as per design and approved specification. Item to include floor cleaning, repair work etc.

Supply, installation, testing, and commissioning of a High quality Show Audio sound system. All necessary hardware and accessories should be included as per the design and drawings.

Content Development for static graphic and print media.

Supply, installation, testing, and commissioning of 9-12w recessed LED COB downlight with aluminium housing, suitable for 220–240V AC operation, complete with all accessories as required.

SITC of Aluminium track for mounting spot lights with supproting SS suspension threads. The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope.

Supply, installation, testing, and commissioning of track-mounted 3W–15W LED spotlight with standard optics, fanless heat sink cooling, high power factor (>0.9), and dimming support, including track, electrical connections, accessories, and all labour, tools, and equipment required for installation, complete as per approved design and direction of Engineer-in-Charge.

Provision and fixing of Fire exitinguisher CO2 type (4.5 kG) as per the requirement.

SITC of Spherical LED of following specs: Indoor DVLED : SMD 3-in-1, 1.5 diameter / 7.07 m2 area sphere, Pixel Pitch: 1.5mm , Brightness: 600 cd/m² , Wall resolution (W X H): 2356 X 1178 , IP31 rated, Contrast ratio: 6000:1, Viewing angle degree (H 160 / V 140), LED Life (100000 hours), Refresh Rate(3840Hz), 14 bits processing depth, Front access with base stand, with suitable controller.

Supply Installation Testing & Commissioning of CPU with following specification: Processor intel core i7, 13th Generation, 500GB SSD, 16GB DDR4 RAM & 4 GB GPU to drive required HDMI output with required operating system.

Development, Installation, Integration, Testing, Commissioning of SOFTWARE VOL software. Quantity to be measured per interface/exhibit

Content Development for 2D Animation, Composition, archival photo video

Provision and fixing of a kiosk with a semi circular curve shape interactive kiosk of size 3300mmx1650mm base and 850mm height, constructed as per the design. The kiosk shall be made of HDHMR (High Density High Moisture Resistance) and finished with PU Paint. The kiosk should include provisions for mounting 3 nos. of 22 inch TV, conduits, and housing a server. Dimensions may vary as per design requirements.

Supplying, Installation, testing & commissioning of 22 inch LED, Resolution 1,920 x 1,080 (FHD), inbuilt or overlay Touch, Brightness - 250 nits or Higher with extension to connect touch & display interface to the server.

Supply Installation Testing & Commissioning of CPU with following specification: Processor intel core i7, 12th Generation, 500GB SSD, 16GB DDR4 RAM & 8 GB GPU to drive required HDMI output with required operating system.

Development, Installation, Integration, Testing, Commissioning of SOFTWARE INTERACTIVE. Quantity to be measured per interface/exhibit

Content Development for Interactive Exhibit.

Providing and fixing of 12-18mm thick HDHMR panel cladding on straight/curved ms framework out of 50mm x 50mm sections and appropriate gauge at 600mm vertically/horizontally spacing and as where required for proper completion of job fixed to the wall by means of raul plugs/screws . The cost includes labour, materials, wastages, hardware, lead, lifts, cutting to all shapes, fixing at all loations and levels etc. complete as per the instructions of Engineer-in charge.

Providing and fixing in position LED Neon strip profile light with necessary driver in linear, straight or curvilinear manner as per design intent. LED Luminosity to be 24-26lm/LED, working voltage around 24V DC., IP67 rated, Working Life >30, 000hours, Power consumption 6W/m, Lumen (LM) 1200-1400lm/mtr, The neon strip, with mininum bend radius 100mm, could light up every dark corner It is to be of RGB programmable colour and DMX controlled. It should be free from any dark spots and provide an even light throughout. The specifications are tentative and may vary depending on the design and spatial requirements subject to satisfaction of Engineer-in-Charge.

Content Development for static graphic and print media.

Supply, installation, testing, and commissioning of 9-12w recessed LED COB downlight with aluminium housing, suitable for 220–240V AC operation, complete with all accessories as required.

SITC of Aluminium track for mounting spot lights with supproting SS suspension threads. The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope.

Supply, installation, testing, and commissioning of track-mounted 3W–15W LED spotlight with standard optics, fanless heat sink cooling, high power factor (>0.9), and dimming support, including track, electrical connections, accessories, and all labour, tools, and equipment required for installation, complete as per approved design and direction of Engineer-in-Charge.

Provision and fixing of Fire exitinguisher CO2 type (4.5 kG) as per the requirement.

Supply and installation of Standing Kiosk Unit with provision for mounting a 85” Touch TV . The kiosk shall have an overall size of 1300mm (L) x 300mm (W) x 2100mm (H), constructed using HDHMR (High Density High Moisture Resistance) board and finished with PU paint. It shall include necessary provisions for TV mounting, electrical conduits, and space for housing a server. Final dimensions may be adjusted as per the approved design requirements.

Supplying, Installation, testing & commissioning of 85 inch or more transparent LED screen, Resolution-3840*2160 (UHD), Landscape & Vertical Support ,Brightness - 500 nits or Higher with extension to connect display interface to the server.

Supply Installation Testing & Commissioning of CPU with following specification: Processor intel core i7, 13th Generation, 500GB SSD, 16GB DDR4 RAM & 4 GB GPU to drive required HDMI output with required operating system.

Development, Installation, Integration, Testing, Commissioning of SOFTWARE INTERACTIVE. Quantity to be measured per interface/exhibit

Content Development for Interactive Exhibit.

Provision and fixing of Backlit Silicon Edge Graphics (SEG), designed to be fixed on the wall with necessary support. The graphic panel shall be made of polyester fabric, and metal frame with a fabric material utilizing a UV printing process. Final size to be followed as per drawing.

Provision and fixing of photo frame of size as per design mounted on wall with necessary accessories. Frame glass to be 2 to 4 mm thk glass with fibre/metal/wood for peripheral frame.

Providing and fixing of 12-18mm thick HDHMR panel cladding on straight/curved ms framework out of 50mm x 50mm sections and appropriate gauge at 600mm vertically/horizontally spacing and as where required for proper completion of job fixed to the wall by means of raul plugs/screws . The cost includes labour, materials, wastages, hardware, lead, lifts, cutting to all shapes, fixing at all loations and levels etc. complete as per the instructions of Engineer-in charge.

Providing and fixing Metal Grid Ceiling system using pre-coated aluminum panels laid over suspended GI grid framework with main runners, cross tees, wall angles, hangers, and all required accessories, including necessary cutouts, edge trims, and installation, complete as per approved drawings and direction of Engineer-in-Charge.

Provision, fixing and application of 12.5 mm thick tapered edge glass reinforced gypsum board ceiling on appropriate GI framework as per design. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge. Actual surface area to be measured for payment.

Providing and laying Commercial Carpet flooring in approved shade as per drawing.. The cost shall be all inclusive of transportation, loading, unloading etc at site and wastage etc. Actual laid area and attic stock will be measured and paid. Preparing the surface like deep cleaning of floor and removing of loose particle and Laying of Carpet tiles including necessary pre-applied or post applied adhesives .

Provision and fixing of miscellaneous theme based interior works items Including cloak room with furniture, wooden/metal work, cladding, surface finishing and other detailing work as per design and approved specification. Item to include floor cleaning, repair work etc.

Content Development for static graphic and print media.

Supply, installation, testing, and commissioning of 9-12w recessed LED COB downlight with aluminium housing, suitable for 220–240V AC operation, complete with all accessories as required.

SITC of Aluminium track for mounting spot lights with supproting SS suspension threads. The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope.

Supply, installation, testing, and commissioning of track-mounted 3W–15W LED spotlight with standard optics, fanless heat sink cooling, high power factor (>0.9), and dimming support, including track, electrical connections, accessories, and all labour, tools, and equipment required for installation, complete as per approved design and direction of Engineer-in-Charge.

Provision and fixing of Fire exitinguisher CO2 type (4.5 kG) as per the requirement.

Providing and fixing of TV FRAME 85 made out of HDHMR board and finished in PU Paint as per drawing.

Supplying, Installation, testing & commissioning of 85 inch or more transparent LED screen, Resolution-3840*2160 (UHD), Landscape & Vertical Support ,Brightness - 500 nits or Higher with extension to connect display interface to the server.

Supply Installation Testing & Commissioning of CPU with following specification: Processor intel core i7, 13th Generation, 500GB SSD, 16GB DDR4 RAM & 4 GB GPU to drive required HDMI output with required operating system.

Development, Installation, Integration, Testing, Commissioning of SOFTWARE INTERACTIVE. Quantity to be measured per interface/exhibit

Content Development for Interactive Exhibit.

Provision and fixing of Backlit Translite Graphic Panel, designed to be fixed to the floor, wall or ceiling with necessary support. The graphic panel shall be providing an edgeless or frameless feel. The panel shall include a provision for a lightbox with an arrangement of LED strip lights to achieve the desired brightness of the graphic. Frame of the outer body to be finished as specified.

Providing and fixing of 12-18mm thick HDHMR panel cladding on straight/curved ms framework out of 50mm x 50mm sections and appropriate gauge at 600mm vertically/horizontally spacing and as where required for proper completion of job fixed to the wall by means of raul plugs/screws . The cost includes labour, materials, wastages, hardware, lead, lifts, cutting to all shapes, fixing at all loations and levels etc. complete as per the instructions of Engineer-in charge.

Provision and fixing of a double-sided partition wall of specified depth, which can be flat or curved, constructed using industrial-grade anti-termite HDHMR (High Density High Moisture Resistance) board. The partition wall shall be supported by MS CRC PIPE of the required depth, and include wood batten and wood frame inside for erection and support as per the design requirements. The wall should be finished with paint and include all necessary provisions for electrical and data installations. The work shall be completed to the satisfaction of the Engineer in Charge. Measurement shall be taken from one side only

Providing and fixing Metal Grid Ceiling system using pre-coated aluminum panels laid over suspended GI grid framework with main runners, cross tees, wall angles, hangers, and all required accessories, including necessary cutouts, edge trims, and installation, complete as per approved drawings and direction of Engineer-in-Charge.

Provision, fixing and application of 12.5 mm thick tapered edge glass reinforced gypsum board ceiling on appropriate GI framework as per design. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge. Actual surface area to be measured for payment.

Providing and laying Commercial Carpet flooring in approved shade as per drawing.. The cost shall be all inclusive of transportation, loading, unloading etc at site and wastage etc. Actual laid area and attic stock will be measured and paid. Preparing the surface like deep cleaning of floor and removing of loose particle and Laying of Carpet tiles including necessary pre-applied or post applied adhesives .

Provision and fixing of miscellaneous theme based interior works items Including cloak room with furniture, wooden/metal work, cladding, surface finishing and other detailing work as per design and approved specification. Item to include floor cleaning, repair work etc.

Content Development for static graphic and print media.

Supply, installation, testing, and commissioning of 9-12w recessed LED COB downlight with aluminium housing, suitable for 220–240V AC operation, complete with all accessories as required.

SITC of Aluminium track for mounting spot lights with supproting SS suspension threads. The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope.

Supply, installation, testing, and commissioning of track-mounted 3W–15W LED spotlight with standard optics, fanless heat sink cooling, high power factor (>0.9), and dimming support, including track, electrical connections, accessories, and all labour, tools, and equipment required for installation, complete as per approved design and direction of Engineer-in-Charge.

Provision and fixing of Fire exitinguisher CO2 type (4.5 kG) as per the requirement.

Supplying, Installation, testing & commissioning of Micro LED video wall (flat/curve) along with LED controller with pixel pitch of 1.56mm or less , 800 nits or more brightness, 16:9 aspect ratio per tile, 3840hz refresh rate. Any cables, graphic processor, accessories required for installation and connection of display cable to the server room should be included in the cost.

Supply Installation Testing & Commissioning of CPU with following specification: Processor intel core i7, Latest Generation, 500GB SSD, 8GB DDR4 RAM & intergrated GPU to drive required HDMI output

Development, Installation, Integration, Testing, Commissioning of SOFTWARE VOL software. Quantity to be measured per interface/exhibit

Content Development for 2D Animation, Composition, archival photo video

Provision and fixing of Vinyl Frames of different sizes mounted on wall with necessary accessories. Frame backing to be made out of 6-8mm thk MDF board with Vinyl Graphic/Phtograph pasted on top. Frame glass to be 2 to 4 mm thk extra clear glass with fibre/metal/wood for peripheral frame. Dimensions may vary as per design requirements.

Provision and fixing of chair with soft cushioning suitable for outdoor usage complete as per satisfaction of Engineer in Charge.

Providing and fixing of 12-18mm thick HDHMR panel cladding on straight/curved ms framework out of 50mm x 50mm sections and appropriate gauge at 600mm vertically/horizontally spacing and as where required for proper completion of job fixed to the wall by means of raul plugs/screws . The cost includes labour, materials, wastages, hardware, lead, lifts, cutting to all shapes, fixing at all loations and levels etc. complete as per the instructions of Engineer-in charge.

Provision and fixing of a double-sided partition wall of specified depth, which can be flat or curved, constructed using industrial-grade anti-termite HDHMR (High Density High Moisture Resistance) board. The partition wall shall be supported by MS CRC PIPE of the required depth, and include wood batten and wood frame inside for erection and support as per the design requirements. The wall should be finished with paint and include all necessary provisions for electrical and data installations. The work shall be completed to the satisfaction of the Engineer in Charge. Measurement shall be taken from one side only

Providing and Fixing of Linear Grooved Slats Sound Absorption Panels HDF based Melamine Finish Sound Absorption Panels on walls or ceiling over existing substrate. The panels are made of Fire Rated High Density Fibreboard. The top surface is laminated with melamine finish. Each panel is having tongue and groove structure on the long side with an additional groove to hold the clip. The back of each panels is pasted with acoustic fleece. The front of the panel is grooved while the back is perforated with holes. The installation is to be done on a aluminium channel with galvanized steel clip system. Once installed, the edges if open are covered with L profile of similar shade. The final finish as per the approved sample and as per the direction of Engineer-In-Charge.

Providing and laying Commercial Carpet flooring in approved shade as per drawing.. The cost shall be all inclusive of transportation, loading, unloading etc at site and wastage etc. Actual laid area and attic stock will be measured and paid. Preparing the surface like deep cleaning of floor and removing of loose particle and Laying of Carpet tiles including necessary pre-applied or post applied adhesives .

Provision and fixing of miscellaneous theme based interior works items Including cloak room with furniture, wooden/metal work, cladding, surface finishing and other detailing work as per design and approved specification. Item to include floor cleaning, repair work etc.

Supply, installation, testing, and commissioning of a High quality Exhibit sound system. All necessary hardware and accessories should be included as per the design and drawings.

Content Development for static graphic and print media.

Supply, installation, testing, and commissioning of 9-12w recessed LED COB downlight with aluminium housing, suitable for 220–240V AC operation, complete with all accessories as required.

SITC of Aluminium track for mounting spot lights with supproting SS suspension threads. The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope.

Supply, installation, testing, and commissioning of track-mounted 3W–15W LED spotlight with standard optics, fanless heat sink cooling, high power factor (>0.9), and dimming support, including track, electrical connections, accessories, and all labour, tools, and equipment required for installation, complete as per approved design and direction of Engineer-in-Charge.

Provision and fixing of Fire exitinguisher CO2 type (4.5 kG) as per the requirement.

Supplying, Installation, testing & commissioning of 22 inch Tv, Resolution 1,920 x 1,080 (FHD), Brightness - 250 nits or Higher with extension to connect touch & display interface to the server.

Supply Installation Testing & Commissioning of Compact CPU with following specification: Processor intel core i7, 500GB SSD, 16GB DDR4 RAM with required operating system.

Development, Installation, Integration, Testing, Commissioning of SOFTWARE VOL software. Quantity to be measured per interface/exhibit

Content Development for 2D Animation, Composition, archival photo video

Providing and fixing Metal Grid Ceiling system using pre-coated aluminum panels laid over suspended GI grid framework with main runners, cross tees, wall angles, hangers, and all required accessories, including necessary cutouts, edge trims, and installation, complete as per approved drawings and direction of Engineer-in-Charge.

Provision, fixing and application of 12.5 mm thick tapered edge glass reinforced gypsum board ceiling on appropriate GI framework as per design. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge. Actual surface area to be measured for payment.

Providing and laying Commercial Carpet flooring in approved shade as per drawing.. The cost shall be all inclusive of transportation, loading, unloading etc at site and wastage etc. Actual laid area and attic stock will be measured and paid. Preparing the surface like deep cleaning of floor and removing of loose particle and Laying of Carpet tiles including necessary pre-applied or post applied adhesives .

Provision and fixing of miscellaneous theme based interior works items Including cloak room with furniture, wooden/metal work, cladding, surface finishing and other detailing work as per design and approved specification. Item to include floor cleaning, repair work etc.

Content Development for static graphic and print media.

Supply, installation, testing, and commissioning of 9-12w recessed LED COB downlight with aluminium housing, suitable for 220–240V AC operation, complete with all accessories as required.

SITC of Aluminium track for mounting spot lights with supproting SS suspension threads. The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope.

Supply, installation, testing, and commissioning of track-mounted 3W–15W LED spotlight with standard optics, fanless heat sink cooling, high power factor (>0.9), and dimming support, including track, electrical connections, accessories, and all labour, tools, and equipment required for installation, complete as per approved design and direction of Engineer-in-Charge.

Provision and fixing of Fire exitinguisher CO2 type (4.5 kG) as per the requirement.

Supplying, Installation, testing & commissioning of Micro LED video wall (flat/curve) along with LED controller with pixel pitch of 1.56mm or less , 800 nits or more brightness, 16:9 aspect ratio per tile, 3840hz refresh rate. Any cables, graphic processor, accessories required for installation and connection of display cable to the server room should be included in the cost.

Supply Installation Testing & Commissioning of CPU with following specification: Processor intel core i7, Latest Generation, 500GB SSD, 8GB DDR4 RAM & intergrated GPU to drive required HDMI output

Development, Installation, Integration, Testing, Commissioning of SOFTWARE VOL software. Quantity to be measured per interface/exhibit

Content Development for 2D Animation, Composition, archival photo video

Providing and fixing of 12-18mm thick HDHMR panel cladding on straight/curved ms framework out of 50mm x 50mm sections and appropriate gauge at 600mm vertically/horizontally spacing and as where required for proper completion of job fixed to the wall by means of raul plugs/screws . The cost includes labour, materials, wastages, hardware, lead, lifts, cutting to all shapes, fixing at all loations and levels etc. complete as per the instructions of Engineer-in charge.

Content Development for static graphic and print media.

SITC of AI Holobox Setup with screen size of 86 inch (diagonal) made in a form of dark cuboid structure - Back, Top, Bottom, Left and Right to be in HDHMR 18 mm with Black Paint. Front to have holographic screen, included in this cost.

SITC of Server with following specification: Processor intel core i9, Latest Generation, 500GB SSD, 32GB DDR4 RAM & 48 GB GPU to drive required HDMI output with required operating system.

Providing, developing, and commissioning a custom-designed AI application tailored as per the project requirements.

Content Development for Interactive Exhibit.

Content Development for static graphic and print media.

Provision and fixing of photo frame of size as per design mounted on wall with necessary accessories. Frame glass to be 2 to 4 mm thk glass with fibre/metal/wood for peripheral frame.

Providing and fixing of 12-18mm thick HDHMR panel cladding on straight/curved ms framework out of 50mm x 50mm sections and appropriate gauge at 600mm vertically/horizontally spacing and as where required for proper completion of job fixed to the wall by means of raul plugs/screws . The cost includes labour, materials, wastages, hardware, lead, lifts, cutting to all shapes, fixing at all loations and levels etc. complete as per the instructions of Engineer-in charge.

Supply, installation, testing, and commissioning of 9-12w recessed LED COB downlight with aluminium housing, suitable for 220–240V AC operation, complete with all accessories as required.

SITC of Aluminium track for mounting spot lights with supproting SS suspension threads. The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope.

Supply, installation, testing, and commissioning of track-mounted 3W–15W LED spotlight with standard optics, fanless heat sink cooling, high power factor (>0.9), and dimming support, including track, electrical connections, accessories, and all labour, tools, and equipment required for installation, complete as per approved design and direction of Engineer-in-Charge.

Content Development for static graphic and print media.

Provision and fixing of Fire exitinguisher CO2 type (4.5 kG) as per the requirement.

Provision and fixing of Kiosk 37 of size 1035mm(L)x385mm(W)x750mm(H), appropiate for mounting a Stretch TV of 37", IR touch sensor, conduits, and housing a server. Dimensions may vary as per design requirements. The kiosk shall be made of HDHMR (High Density High Moisture Resistance) and finished with PU Paint. The kiosk should include provisions for mounting a TV,

Supplying, Installation, testing & commissioning of 37 inch LCD -Back Lit LED,Resolution-1920x540, Landscape & Vertical Support ,Brightness - 500 nits or Higher,Contrast Ratio -1100:1 & Dynamic/Mega Contrast 500,000:1. Price to be inclusive of accessories, mounting, cabling etc.

SITC of IR Touch Panel for Long Touch Table, Size as per drawing

Supplying, Installation, testing & commissioning of 65 inch or more LCD -Back Lit LED,Resolution-3840*2160 (UHD), Landscape & Vertical Support ,Brightness - 500 nits or Higher, Contrast Ratio -1100:1 with extension to connect display interface to the server.

Supply Installation Testing & Commissioning of CPU with following specification: Processor intel core i7, 12th Generation, 500GB SSD, 16GB DDR4 RAM & 8 GB GPU to drive required HDMI output with required operating system.

Development, Installation, Integration, Testing, Commissioning of SOFTWARE INTERACTIVE. Quantity to be measured per interface/exhibit

Content Development for Interactive Exhibit.

Provision and fixing of a kiosk with a 1600mmx500mm base and 850mm height, constructed as per the design. The kiosk shall be made of HDHMR (High Density High Moisture Resistance) and finished with PU Paint. The kiosk should include provisions for mounting a TV, conduits, and housing a server. Dimensions may vary as per design requirements.

Supplying, Installation, testing & commissioning of 22 inch LED, Resolution 1,920 x 1,080 (FHD), inbuilt or overlay Touch, Brightness - 250 nits or Higher with extension to connect touch & display interface to the server.

Supplying, Installation, testing & commissioning of 65 inch or more LCD -Back Lit LED,Resolution-3840*2160 (UHD), Landscape & Vertical Support ,Brightness - 500 nits or Higher, Contrast Ratio -1100:1 with extension to connect display interface to the server.

Supply Installation Testing & Commissioning of CPU with following specification: Processor intel core i7, 12th Generation, 500GB SSD, 16GB DDR4 RAM & 8 GB GPU to drive required HDMI output with required operating system.

Development, Installation, Integration, Testing, Commissioning of SOFTWARE INTERACTIVE. Quantity to be measured per interface/exhibit

Conducting thematic shoot, raw data processing, stitching sfx, composition etc. for Content Development

Supplying, Installation, testing & commissioning of 65 inch LCD -Back Lit LED, Resolution 2160 x 3840 (UHD), built in touch IFPD, brightness - 350 nits or higher, Anti-Glare treatment on surface, Android , wifi, built-in storage, 24Hrs x 7 operation and compatible with extension to connect touch & display interface to the server.

Supply Installation Testing & Commissioning of CPU with following specification: Processor intel core i7, 13th Generation, 500GB SSD, 16GB DDR4 RAM & 4 GB GPU to drive required HDMI output with required operating system.

Development, Installation, Integration, Testing, Commissioning of SOFTWARE INTERACTIVE. Quantity to be measured per interface/exhibit

Content Development for Interactive Exhibit.

Providing and fixing of 12-18mm thick HDHMR panel cladding on straight/curved ms framework out of 50mm x 50mm sections and appropriate gauge at 600mm vertically/horizontally spacing and as where required for proper completion of job fixed to the wall by means of raul plugs/screws . The cost includes labour, materials, wastages, hardware, lead, lifts, cutting to all shapes, fixing at all loations and levels etc. complete as per the instructions of Engineer-in charge.

Provision and fixing of a double-sided partition wall of specified depth, which can be flat or curved, constructed using industrial-grade anti-termite HDHMR (High Density High Moisture Resistance) board. The partition wall shall be supported by MS CRC PIPE of the required depth, and include wood batten and wood frame inside for erection and support as per the design requirements. The wall should be finished with paint and include all necessary provisions for electrical and data installations. The work shall be completed to the satisfaction of the Engineer in Charge. Measurement shall be taken from one side only

Providing and fixing Metal Grid Ceiling system using pre-coated aluminum panels laid over suspended GI grid framework with main runners, cross tees, wall angles, hangers, and all required accessories, including necessary cutouts, edge trims, and installation, complete as per approved drawings and direction of Engineer-in-Charge.

Provision, fixing and application of 12.5 mm thick tapered edge glass reinforced gypsum board ceiling on appropriate GI framework as per design. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge. Actual surface area to be measured for payment.

Providing and laying Commercial Carpet flooring in approved shade as per drawing.. The cost shall be all inclusive of transportation, loading, unloading etc at site and wastage etc. Actual laid area and attic stock will be measured and paid. Preparing the surface like deep cleaning of floor and removing of loose particle and Laying of Carpet tiles including necessary pre-applied or post applied adhesives .

Provision and fixing of miscellaneous theme based interior works items Including cloak room with furniture, wooden/metal work, cladding, surface finishing and other detailing work as per design and approved specification. Item to include floor cleaning, repair work etc.

Supply, installation, testing, and commissioning of a High quality Exhibit sound system. All necessary hardware and accessories should be included as per the design and drawings.

Content Development for static graphic and print media.

Supply, installation, testing, and commissioning of 9-12w recessed LED COB downlight with aluminium housing, suitable for 220–240V AC operation, complete with all accessories as required.

SITC of Aluminium track for mounting spot lights with supproting SS suspension threads. The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope.

Supply, installation, testing, and commissioning of track-mounted 3W–15W LED spotlight with standard optics, fanless heat sink cooling, high power factor (>0.9), and dimming support, including track, electrical connections, accessories, and all labour, tools, and equipment required for installation, complete as per approved design and direction of Engineer-in-Charge.

Provision and fixing of Fire exitinguisher CO2 type (4.5 kG) as per the requirement.

Supply Installation Testing & Commissioning of chair which should be controlled in sync with the video having Vibration, Roll and Pitch +-15 degree. Chairs to be in set of 2 quantity, electrically powered. Any hardware like Controlling system, actuator to be part of the cost. The chair should support integration with external hardware over Serial/TCP/UDP to trigger the show. The seats to be comfortable in all aspects with required cushoning.

Supplying, Installation, testing & commissioning of high-quality VR Headset with mirroring capability on to any display device with HDMI Input. Any Hardware required to achieve the mirroring shall be included in this cost.

Development, Installation, Integration, Testing, Commissioning of Group VR Software. Quantity to be measured per interface/exhibit

Content Development for Virtual Reality (360) setup - For 1 environment each

Providing and fixing of VR Storage unit of size 2100mm length × 450mm width × 900mm height, made from 18mm thick HDHMR / BWP plywood (as specified) for both carcass and shutters. All exposed surfaces to be finished in 1.0mm / 1.5mm thick laminate or PU paint in approved design and shade. The cabinet shall include adjustable shelves, soft-close hinges, and all necessary hardware of approved make. All visible edges to be finished with matching PVC edge banding. The cabinet shall be fixed with proper support, aligned accurately, and completed in all respects to the satisfaction of the Engineer-in-Charge.

Provision and fixing of a double-sided partition wall of specified depth, which can be flat or curved, constructed using industrial-grade anti-termite HDHMR (High Density High Moisture Resistance) board. The partition wall shall be supported by MS CRC PIPE of the required depth, and include wood batten and wood frame inside for erection and support as per the design requirements. The wall should be finished with paint and include all necessary provisions for electrical and data installations. The work shall be completed to the satisfaction of the Engineer in Charge. Measurement shall be taken from one side only

Providing & fixing composite wall paneling in router cut HDHMR/Metal/Flexi ply/Gypsum and including custom lighting and finished as per the approved design. Item to include all the necessary accessories.

Providing and fixing Metal Grid Ceiling system using pre-coated aluminum panels laid over suspended GI grid framework with main runners, cross tees, wall angles, hangers, and all required accessories, including necessary cutouts, edge trims, and installation, complete as per approved drawings and direction of Engineer-in-Charge.

Providing and laying Commercial Carpet flooring in approved shade as per drawing.. The cost shall be all inclusive of transportation, loading, unloading etc at site and wastage etc. Actual laid area and attic stock will be measured and paid. Preparing the surface like deep cleaning of floor and removing of loose particle and Laying of Carpet tiles including necessary pre-applied or post applied adhesives .

Provision and fixing of miscellaneous theme based interior works items Including cloak room with furniture, wooden/metal work, cladding, surface finishing and other detailing work as per design and approved specification. Item to include floor cleaning, repair work etc.

Supply, installation, testing, and commissioning of a High quality Show Audio sound system. All necessary hardware and accessories should be included as per the design and drawings.

Content Development for static graphic and print media.

Supply, installation, testing, and commissioning of 9-12w recessed LED COB downlight with aluminium housing, suitable for 220–240V AC operation, complete with all accessories as required.

SITC of Aluminium track for mounting spot lights with supproting SS suspension threads. The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope.

Supply, installation, testing, and commissioning of track-mounted 3W–15W LED spotlight with standard optics, fanless heat sink cooling, high power factor (>0.9), and dimming support, including track, electrical connections, accessories, and all labour, tools, and equipment required for installation, complete as per approved design and direction of Engineer-in-Charge.

Provision and fixing of Fire exitinguisher CO2 type (4.5 kG) as per the requirement.

Design, fabrication, and installation of CBSE selfie setup consisting of a printed vinyl wall graphic backdrop on 5 mm thick sunboard or ACP base, mounted on a wall of size 3000 mm (L) × 2550 mm (H), with high-resolution digital print, matte lamination, and edge finishing. The setup shall also include a CBSE logo cutout (approx. 600–800 mm dia), laser-cut from 10 mm thick acrylic sheet with vinyl overlay or UV print, mounted as a raised element on the backdrop. Item to include camera setup, printer and a 22inch interactive kiosk.

Provision and fixing of a double-sided partition wall of specified depth, which can be flat or curved, constructed using industrial-grade anti-termite HDHMR (High Density High Moisture Resistance) board. The partition wall shall be supported by MS CRC PIPE of the required depth, and include wood batten and wood frame inside for erection and support as per the design requirements. The wall should be finished with paint and include all necessary provisions for electrical and data installations. The work shall be completed to the satisfaction of the Engineer in Charge. Measurement shall be taken from one side only

Provision, fixing and application of 12.5 mm thick tapered edge glass reinforced gypsum board ceiling on appropriate GI framework as per design. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge. Actual surface area to be measured for payment.

Providing and laying Commercial Carpet flooring in approved shade as per drawing.. The cost shall be all inclusive of transportation, loading, unloading etc at site and wastage etc. Actual laid area and attic stock will be measured and paid. Preparing the surface like deep cleaning of floor and removing of loose particle and Laying of Carpet tiles including necessary pre-applied or post applied adhesives .

Provision and fixing of miscellaneous theme based interior works items Including cloak room with furniture, wooden/metal work, cladding, surface finishing and other detailing work as per design and approved specification. Item to include floor cleaning, repair work etc.

Content Development for static graphic and print media.

Supply, installation, testing, and commissioning of 9-12w recessed LED COB downlight with aluminium housing, suitable for 220–240V AC operation, complete with all accessories as required.

SITC of Aluminium track for mounting spot lights with supproting SS suspension threads. The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope.

Supply, installation, testing, and commissioning of track-mounted 3W–15W LED spotlight with standard optics, fanless heat sink cooling, high power factor (>0.9), and dimming support, including track, electrical connections, accessories, and all labour, tools, and equipment required for installation, complete as per approved design and direction of Engineer-in-Charge.

Provision and fixing of Fire exitinguisher CO2 type (4.5 kG) as per the requirement.

Supply, installation, testing, and commissioning of 9-12w recessed LED COB downlight with aluminium housing, suitable for 220–240V AC operation, complete with all accessories as required.

Supplying, Installation, testing & commissioning of 65 inch LCD -Back Lit LED, Resolution 2160 x 3840 (UHD), built in touch IFPD, brightness - 350 nits or higher, Anti-Glare treatment on surface, Android , wifi, built-in storage, 24Hrs x 7 operation and compatible with extension to connect touch & display interface to the server.

Providing and fixing of TV FRAME 65 made out of HDHMR board and finished in PU Paint as per drawing.

Supply Installation Testing & Commissioning of Compact CPU with following specification: Processor intel core i7, 500GB SSD, 16GB DDR4 RAM with required operating system.

Development, Installation, Integration, Testing, Commissioning of SOFTWARE INTERACTIVE. Quantity to be measured per interface/exhibit

Content Development for Interactive Exhibit.

Provision, fixing and application of 12.5 mm thick tapered edge glass reinforced gypsum board ceiling on appropriate GI framework as per design. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge. Actual surface area to be measured for payment.

Providing and laying Commercial Carpet flooring in approved shade as per drawing.. The cost shall be all inclusive of transportation, loading, unloading etc at site and wastage etc. Actual laid area and attic stock will be measured and paid. Preparing the surface like deep cleaning of floor and removing of loose particle and Laying of Carpet tiles including necessary pre-applied or post applied adhesives .

Provision and fixing of miscellaneous theme based interior works items Including cloak room with furniture, wooden/metal work, cladding, surface finishing and other detailing work as per design and approved specification. Item to include floor cleaning, repair work etc.

Content Development for static graphic and print media.

SITC of Aluminium track for mounting spot lights with supproting SS suspension threads. The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope.

Supply, installation, testing, and commissioning of track-mounted 3W–15W LED spotlight with standard optics, fanless heat sink cooling, high power factor (>0.9), and dimming support, including track, electrical connections, accessories, and all labour, tools, and equipment required for installation, complete as per approved design and direction of Engineer-in-Charge.

Provision and fixing of Fire exitinguisher CO2 type (4.5 kG) as per the requirement.

Supply Installation Testing & Commissioning of Compact SERVER with following specification: Processor intel core i7, 500GB SSD, 8GB DDR4 RAM

Development, Installation, Integration, Testing, Commissioning of video on loop application. Quantity to be measured per interface/exhibit

Supplying, Installation, testing & commissioning of high-quality VR Headset with HDMI Input

Providing, developing, and commissioning a custom-designed Virtual Reality (VR) application as per the project requirements.

Content Development for Virtual Reality shooot (360) setup - 3 shows, 3 minutes per show

Providing and fixing a custom-designed table of approximate size 600 mm (L) × 450 mm (W)× 850 mm (H), fabricated from 18 mm thick HDHMR or plywood, finished with PU paint in approved colour, texture, and sheen. The design shall incorporate a combination of linear and curved profiles as per the approved architectural concept. The table shall include an internal MS box framework to ensure structural stability and durability. Complete work to be executed strictly as per the approved design drawings, architectural intent, and to the full satisfaction of the Architect.

Providing and placing bar style stools of approved design, approximately 750 mm seat height (or as per site requirements), with sturdy frame constructed from MS powder-coated sections, solid wood, or approved composite material. Seat and back (if provided) shall be ergonomically shaped, with cushioning upholstered in premium fabric or leatherette as per approved sample.All exposed edges shall be smoothly finished and rounded for safety and aesthetics. Stool shall include protective footrest, levelers or rubber buffers at the base to prevent floor damage. Complete work to be executed as per approved design, mock-up, and to the satisfaction of the Architect.

Provision and fixing of a kiosk with a 1350mmx850mm base and 850mm height, constructed as per the design. The kiosk shall be made of HDHMR (High Density High Moisture Resistance) and finished with PU Paint. The kiosk should include provisions for mounting a TV, conduits, and housing a server. Dimensions may vary as per design requirements. Complete work to be executed as per approved design, mock-up, and to the satisfaction of the Architect.

Supply Installation, Testing, & commissioning of Videowall Panel Size 55 inch with Resolution of 1920 x 1080 (FHD) Brightness 500 cd/m2 or above, Bezel to Bezel 0.88mm GAP.Iteam includes necessary retractable mount.

Providing and fixing of IR Touch sensor having dimensions for 2x1 Large Format Display video wall as per approved design and make. Final dimensions may very as per the approved video wall panel.

Providing and installing a touch wall glass with a clear, high-quality tempered glass surface, suitable for touch screen integration. The glass shall be cut to the required dimensions and finished with smooth, polished edges for safety and aesthetic appeal. It will be designed to fit securely on the touch table structure, with proper provisions for mounting and sensor integration. Dimensions may vary as per design requirements. All installation works shall be executed in accordance with approved drawings and subject to Architect’s approval.

SITC of Server with following specification: Processor intel core i7, Latest Generation, 500GB SSD, 16GB DDR4 RAM & 8 GB GPU to drive required HDMI output.

Development, Installation, Integration, Testing, Commissioning of interactive kiosk application. Quantity to be measured per interface/exhibit

Content Development for Interactive exhibit

Provision and fixing of Silicon Edge Graphics (SEG) with an arrangement of LED strip lights. The bottom and top units should have a Lit line finish to illuminate the installation with the desired color of light. Frame of the outer body to be finished in powder coating / PU paint as per the design.

Providing and fixing 6 mm thick toughened back-painted glass of approved color and finish, applied over a properly prepared, leveled, and cleaned surface using high-quality silicone adhesive or concealed mechanical fixings as per design. The back surface of the glass shall be uniformly painted using durable, heat-cured, scratch-resistant paint suitable for long-term interior use. All glass edges shall be machine-polished, with corners rounded to a minimum radius of 5 mm. Joints, if any, shall be finished with color-matching silicone sealant. The rate shall include surface preparation, installation, cleaning, and all necessary hardware, complete in all respects as per architect’s direction.

Providing and applying veneer finish over approved base surface including supply and fixing of natural decorative veneer of approved shade and species, minimum thickness 2mm, bonded with synthetic resin adhesive conforming to IS standards, properly pressed to achieve a seamless finish. The work shall include edge lipping with matching veneer or solid wood beading, surface preparation, filling, sanding, and application of melamine / PU clear polish in minimum three coats to achieve smooth and uniform finish as per manufacturer’s specifications. Complete work to be executed as per approved design, mock-up, and to the satisfaction of the Architect.

Providing and laying vitrified tiles flooring of size minimum 600mm x 600mm x 10mm thick, of specified shade and pattern, laid over a 20mm thick cement mortar bed (1:4) or with approved tile adhesive as per manufacturer’s recommendations. Tiles shall be set true to line and level with 2mm uniform joints, filled with matching, stain-free epoxy grout. All tiles to be mirror-polished / matt finish / anti-skid finish (as specified), free from cracks, edge chipping, and surface defects. The work shall include surface preparation, back-buttering of tiles, cutting, wastage, protection during execution, final cleaning, and handing over in perfect condition, complete in all respects as per drawings and instructions of the Architect/Engineer.

Providing and installing warm white spotlight (7W or higher, 3200K color temperature) with standard beam optics, including all necessary wiring, mounting hardware, and accessories required for proper functioning and installation (track excluded). Includes testing and commissioning.

Supply, installation, testing, and commissioning of aluminum track system for spotlight mounting, supported by stainless steel suspension rods/threads. The scope includes all associated electrical connections, lighting fixtures, and provision of required manpower, tools, equipment, scaffolding, ladders, ropes, or any other machinery necessary to complete the work.

Providing and Fixing of 9-12 W recessed-mounted circular LED COB downlight fixture with die-cast aluminium body finished in powder coating of approved colour. The luminaire shall deliver a minimum system output of 1500 lumens, have a CRI above 80, operate on AC 220–240V, 50/60Hz, and include high surge protection of 2.5kV. Suitable for operation in ambient temperatures ranging from 0°C to +45°C.

Supply, installation, testing, and commissioning of a High quality 2.1 Channel sound system including 2 speakers and 1 subwoofer. All necessary wiring, hardware and accessories in included in the scope

SITC of 25 KVA online UPS 3-phase with batteries backup of minimum 10 minutes, controls, protection and instruments etc. complete as required, include battery, cables, rack etc.

Operations and Maintenance as per scope of work (2PPL).

Supply, Installation, Testing & Commissioning of a Tablet of DISPLAY 11.0 inches, Resolution 1200 x 1920 pixels, Octa-core, 128GB Memory, 8GB RAM, Battery 7040 mAh, including cover and tempered glass

Supplying, installation, testing & commissioning of cubicall type LT panel suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system fabricated in compartmentalized design from CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland, plates i/c cleaning & finishing complete as per approved design.

Supplying, installation, testing & commissioning of three pole and neutral, sheet Steel, MCB distribution board, 415 V, on surface/ recess, complete With tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/lsolator)

Supplying, installation, testing & commissioning of vertical type, 415 V, TPN MCB distribution board Of sheet steel, dust protected, duly powder painted, inclusive Of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs with MCBs and incomer as required

Supplying, installation, testing & commissioning of XLPE 4 core 16 sq mm insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade.

Supplying, installation, testing & commissioning of of 150 mm width X 50 mm depth X 1.6 mm thickness Hot Dipped Galvanised Iron cable tray with G.I. suspenders including G.I. bolts & nuts, etc. as required.

Wiring 4 sq.mm FRLS PVC (Submains wiring) insulated copper conductor single core cable in surface / recessed class pvc conduit, with earthing the point with 4 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light, fan (Point wiring) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed class pvc conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for Power Points with 4 sq. mm. wire size FRLS PVC insulated copper conductor single core cable in surface / recessed class pvc conduit, with modular switch & socket, modular plate, suitable GI box and earthing the point FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying, installation, testing & commissioning of Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required,

SITC of Indoor Wi-Fi Access Point.

SITC of LAN Cable CAT6 including conduits, Patchcords of varied sizes, patch panel

SITC of Data Points including CAT6 I/O and Faceplates, RJ 45 Connectors, Gang Box. Qty measure per LAN Point.

SITC of License for Access Points, switch's.

SITC of 22U Rack MS Powder Coated , Cable Manager, PDU, Cage nut etc.

SITC of router with 7x Gigabit Ethernet ports

SITC of stackable switch, Switching capacity 132 Gbps, RJ45 downlinks - 24

AI Dataset Training for RishiBot

Supply, installation, testing, and commissioning (SITC) Seating benches integrated with embedded speakers for localized audiostorytelling.

Supply, installation, testing, and commissioning (SITC) A digital interactive wall displaying historical events or timelines throughtouch and animation.

Supply, installation, testing, and commissioning (SITC)of Custom-designed QR-enabled scroll displays that provide additional digitalcontent via scans.

Supply, installation, testing, and commissioning (SITC) of Digital stylus pens used for writing or interacting with digital whiteboards andwalls.