REPAIR TO DRAIN, PATH, CULVERT, FENCING AND MISC WORKS AT DOMESTIC AREA AND CAMOUFLAGING TO BUILDINGS, ROOFING AND OTHER CONNECTED MISC WORK IN SMQ AREA UNDER GE (AF) SRINAGAR.TN SRINAGAR

Amount

Contractor’s special attention is invited that work will be executed for up to triple story building. Quoted rates shall be deem to include for provision & removal scaffolding and necessary safety arrangement for workers employed

Demolition of Cement concrete (Unreinforced) of any description in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and as directed by the Engineer-in-Charge.

Demolition, RCC culvert slab / coping and similar work complete all as specified and as directed by the Engineer-in-Charge.

Dismantling fencing wire mesh / chain link fencing, any type all as specified and directed.

Dismantling RCC posts or struts of any section, including taking out embedded portion in concrete or brick work of any position place including swan neck fencing post and making good to disturbed portion all as specified.

Demolition of Brickwork / stone masonery built in cement mortar including all quioins, arches, pillars etc complete all as specified and as directed by the Engineer-in-Charge.

Dismantling Mild steel works of any description complete all as specified and directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50 m and making good surface in soft / loose soil

Taking down cement of cement plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge

M&L for hardcore of brocken stone boulder of gauge n exc 63 mm, deposited, sprade and levelled in layers n exc 15 cm thick watered and rammed to true surface.

M&L for 100 mm thick cement concrete 1:4:8, type D-2, using 40 mm graded stone aggregate, as in Sub base for path / flooring complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and as directed by the Engineer-in-Charge.

M&L for PCC 1:3:6, type C2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge.

M&L for PCC 1:4:8, type D2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge.

M&L for 75 mm thick PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in floor / path / hardstanding finish the surface fair & even complete.

M&L for Forming contraction joints (Dummy) in concrete pavement, 25 mm deep x 10 mm wide priming & filled with sealing compound Grade 'A' all as specified and as directed.

Demolition of interlocking paver block of any description or thickness in path / hardstanding etc laid, bedded and pointed dry, all as specified.

Material & Labour for machine pressed precast concrete interlocking paver block of approved shape and size of 60 mm thickness, with minimum compressive strength of 35 N / Sqmm (M-35 grade), without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface, with white cement and pigment laid in path / hardstanding complete Note:- Sand screed will be measured & paid seperatly.

M&L for sand cushioning over PCC surfaces, for laying of interlocking tiles, spread rolled and consolidated to gradient as required complete all as specified and as directed.

Demolition of floor tiles or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding including rubbish off the premises, all as specified..

M&L 15 mm thick screed or bedding layer in cement mortar (1:4) for laying floor finishes, complete all as specified.

M&L for rubbur molded glossy finish Chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick, in white cement with pigment, set, jointed in neat cement slurry & pointed in coloured cement, as in floors / path / hardstanding, laid over screed bed complete all as specified and directed.

Material and labour 1st quality vitrified parking tiles of approved shade, 10 to 12 mm thick polished area of each tiles exceeding 0.08 sqm but not exceeding 0.18 sqm as in floors / path etc, set & jointed in neat cement slurry & pointed in matching coloured polymer cement based grout to match complete. Make :Johnson Endura meteor (Korneto Biege) or equivalent make mention in Appx A.

M&L for cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in coping and the like, weathering, slightly rounded or chamfered angles including necessary form work complete.

M&L for Reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in coping and the like, weathering, slightly rounded or chamfered angles including necessary form work complete. Note:- Reinforcement steel will be measured & paid seperatly.

Dimolition of precast cement concrete louvres and jallis of any description and in any position as directed.

M&L for providing 25 mm thick RCC precast cement concrete louvres and jallis in 1:2:4, type B0 using 12.5 mm Graded stone aggregate, (Measured solid) set in CM 1:4 including all mouldings but excluding frame all as specified and dirtected by Engineer-in-Charge.

S&F in repair galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed by the Engineer-in-Charge Note:-Each line of wire will be measured seperatly.

Restraining and resecuring, barbed wire fencing fencing of any description including making good staples, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed by the Engineer-in-Charge. Note:-Each line of wire will be measured seperatly.

Supply only chain link fencing of galvanized steel wire aparure & size as directed, made up into mattresses or cages lapped wired conforming to IS 2721 all as specified & directed. Note:- Fixing only fencing will be measured and paid separately.

Fixing only chain link fencing of description fixed to steel post with mild steel flat & nut bolt etc. Note: (i) Supply only fencing, will be measured and paid separately. (ii) Supply and fix mild steel nut bolt, line wire and flat will be measured and paid separately.

M&L for mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Supply and fix 8 mm dia mild steel round bar as in line wire for chain link fencing fixed with GI wire including applying two coats aluminium paint over one coat red oxide primer after preparation of surfaces all as directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius with old size bricks built in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

All as per item No 34 above here-in-before but except bricks. Note:- Old brick retrieved vide item No 05 above shall be reused.

M&L for Brick work with sub class 'B" (using old size bricks) straight or curved of on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.

M&L for stone masonary Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge

All as per item No 37 above but except stone, using old stone retrived from item No 05 above.

M&L for flush pointing to random rubble stone masonry uncoursed or brought upto coursed, in Cement mortar 1.4 complete all as specified and as directed by the Engineer-in-Charge

M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete surfaces of walls including finishing the surface even and smooth with using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

M&L for steel reinforcement of TMT bars 8 mm dia and over cut to length and bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for form work to soffits of flat, fair finished surfaces of concrete of suspended culvert slabs not exceeding 200 mm thick (Horizontal or sloping)

M&L for RCC 1:2:4 (nominal mix) Type B1 using 20 mm graded stone aggregate in slabs of culvert supported on walls, beams etc and the like complete.

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed by the Engr-in-Charge.

Material & Labour for road side kerb with factory made Precast cement concrete block of mix 1:2:4 type B-1 using 20 mm graded stone aggregate, not exc 100 mm in thickness & set in CM 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm), including making drainage opening wherever required complete.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including half round molding of exposed edge complete all as specified.

M&L for for mild Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified.

M&L for Broken glass coping on top of walls with 25 mm layer of cement mortar 1:3, and firmly embedded brocken glass at the rate of 10 Kg per square metre complete all as specified and directed by the Enginner-in-Charge.

M&L for preparation of newly plastered surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying two coats of weather proof exterior emulsion paint, over one coat primer colour and tint as ordered, complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old painted steel and iron roof surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint in camouflage pattern all as specified and directed by Engineer-in-Charge

M&L for Preparation of old painted wooden surface of any descreption over 10 cm width or girth and applying one coat of synthetic enamel paint in camouflage pattern all as specified and directed by Engineer-in-Charge

Complete removal of exsting treatment from wall surface including pilister & cornice etc of any descreption including cleaning brooming down or with steel wire brushing, scrapping down smooke soot, moulds, moss and efflorescent salts etc complete all as specified and as directed.

M&L for preparation of newly plastered surfaces / surface obtain after complete removal of existing treatment from walls including sides and soffits of beams, fascias, parapets etc and applying two coats of weather proof exterior emulsion paint, over one coat primer colour and tint as ordered in camouflage pattern, complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old painted surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying one coat of weather proof exterior emulsion paint, colour and tint as ordered in camouflage pattern, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed by the Engr-in-Charge.

M&L for preparation of new plastered surfaces / surface obtain after complete removal of existing treatment from walls including sides and soffits of beams, fascias, parapets etc and applying two coats of cement base paint over a coat of primer in camouflage pattern complete all as specified and as directed by the Engr-in-Charge.

M&L for preparation of old painted surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying one coat of cement base paint, colour and tint as ordered in camouflage pattern, complete all as specified and directed by Engineer-in-Charge.

S&F in repair second class soft wood Weather boarding, clean sawn, thickness 20 mm to 25 mm and rebated on thick edge to give 20 mm laps and fixed in eaves board etc complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engineer-In-Charge.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, from roof coverings, complete all as specified and directed by Engineer-in-Charge

S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 complete.

All as per item No 63 but except Sheets using sheet retrived vide item No 62 above

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

M&L for Preparation of new zinc (or galvanised) steel and iron roof surfaces of any description over 10 cm width or girth to receive painting, by coating with mordant solution including washing and cleaning, etc and applying two coat of synthetic enamel paint over one coat red oxide primer in camouflage pattern complete all as specified and directed by Engineer-in-Charge

M/S NAIK CONSTRUCTION COMPANY

M/S Abdul Ahad Rather

M/S LATIF AHMAD MIR

M/S M B ENTERPRISES

M/S Thakur & Sons

M/S MAQBOOL BHAT & SONS

M/S LUCKY BUILDERS

NAJAR ENTERPRISES