Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹6,600
Closing Date
25 Feb 2020, 2:00 pmClosed
EXECUTIVE ENGINEER (EM) WS SOUTH-I
GREATER KAILASH, PART-I, NEW DELHI
Repair/ rewinding of skope make submersible pump sets under Malviya Nagar Constituency.
2020_DJB_188362_1
NIT No. 30/EE(EM)WS S-I
Open Tender
Electrical Work/ Equipment
Works
30 days
EXECUTIVE ENGINEER (EM) WS SOUTH-I
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Delhi Jal Board
₹6,600
Yes
29 Feb 2020
19 Feb 2020
25 Feb 2020
19 Feb 2020
25 Feb 2020
19 Feb 2020
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. –MN- 193 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Guide Bush 3 Nos., Distance Bush 3 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Stamping Repairing 1 Job., Balancing of Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – MN-195 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Neck Ring 5 Nos., Motor Base 1 No., Guide Bush 5 Nos., Rotor Sleeve Turning & Polishing 1 Job, Stamping Repairing 1 Job, Impeller Rematling & Turning 1 Job., Epoxy Paint for Rotor 1 Job., N.R.V. Repairing 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – MN-197 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Guide Bush 2 Nos., Neck Ring 2 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Balancing of Rotor 1 Job., Stamping Repairing 1 Job, N.R.V. Repairing 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – MN- 203 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Guide Bush 5 Nos., Distance Bush 3 Nos., Neck Ring 5 Nos., Balancing of Rotor 1 Job., Motor Base Repairing 1 Jobs., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – MN-204 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Distance Bush 5 Nos., Guide Bush 5 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Stamping Repairing 1 Job, Thrust Plate Repairing 1 Job., Shaft Stationing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – MN-211 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Distance Bush 4 Nos., Balancing of Rotor 1 job., Epoxy Paint for Rotor 1 Job., Stamping Repairing 1 Job., Thrust Bearing Repairing 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – MN-213 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Guide Bush 6 Nos., Distance Bush 5 Nos., C.I. Stage Bowls 1 Job., Rotor end welding Turning & Polishing & Key way making 1 Job., N.R.V. Repairing 1 Job, Balancing of Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – MN-214 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Neck Rings 6 Nos., Rotor end welding turning & Polishing & Key way making 1 Job, Thrust Plate Repairing 1 Job., Stamping Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Balancing of Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – MN-215 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Neck Rings 5 Nos., Guide bush 5 Nos., Rotor end welding Turning & Polishing & key way making 1 Job, Stamping Repairing 1 Job., Balancing of Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – MN-218 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Neck Rings 4Nos., Guide Bush 5 Nos., Rotor Sleeve Turning & Polishing 1 Job., Motor Base Repairing 1 Job., N.R.V. Repairing 1 Job., Stamping Repairing 1 Job., Impeller Rematling & Turning 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – MN-220 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Distance Bush 7 Nos., Guide Bush 5 Nos., Rotor Sleeve Turning & Polishing 1 Job, Stamping Repairing 1 Job., Balancing of Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – MN- 221 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Connection Piece 1 No., Guide Bush 10 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Epoxy Paint for Rotor 1 Job., Impeller Rematling & Turning 3 Job., Housing Repairing 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – MN- 222 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Guide Bush 4 Nos., Distance Bush 5 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Stamping Repairing 1 Job., Thrust Bearing Repairing 1 Job., Balancing of Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – MN- 227 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Guide Bush 3 Nos., Distance Bush 4 Nos., Rotor Sleeve Turning & Polishing 1 Job., Stamping Repairing 1 Job., N.R.V. Repairing 1 Job., Balancing of Rotor 1 Job., Housing Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. –HK-59 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Neck Rings 6 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Balancing of Rotor 1 jobs., Motor Base Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – HK-62 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Neck Rings 5 Nos., Guide Bush 9 Nos., Rotor Sleeve turning & Polishing 1 Job, Stamping Repairing 1 Job., N.R.V. Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – HK-63 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Guide Bush 3 Nos., Distance Bush 3 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Stamping Repairing 1 Job., Balancing of Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – HK-64 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Neck Ring 5 Nos., Motor Base 1 No., Guide Bush 5 Nos., Rotor Sleeve Turning & Polishing 1 Job, Stamping Repairing 1 Job, Impeller Rematling & Turning 1 Job., Epoxy Paint for Rotor 1 Job., N.R.V. Repairing 1 Job., Labour Charges 1 Job.
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – HK-65 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Neck Ring 2 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Balancing of Rotor 1 Job., Thrust Bearing Repairing 1 Job., Stamping Repairing 1 Job, N.R.V. Repairing 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – HK-66 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Guide Bush 5 Nos., Distance Bush 3 Nos., Neck Ring 5 Nos., Balancing of Rotor 1 Job., Motor Base Repairing 1 Jobs., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – HK-67 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Distance Bush 5 Nos., Guide Bush 5 Nos., Water Seal 2 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Stamping Repairing 1 Job, Thrust Plate Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – HK- 69 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Distance Bush 4 Nos., Balancing of Rotor 1 job., Housing Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Stamping Repairing 1 Job., Labour Charges 1 Job
pumps engineering enterprises
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .