Providing, Installation, Testing and Commissioning of 1 No HC Pumpset having Parameter 8000GPH X 250 Mtr Head at F/P Dain Dabbar

Amount

Providing ,Installation, Testing and Commissioning of 1 No HC Pumpset having Parameter 8000GPH X 250 Mtr Head at F/P Dain dabbar .

Carriage of pumping machinery set from the Firm store to worksite. Carriage of M.S pipes and other allied material from Firm store to work site. Job includes loading at Firm store and unloading at worksite. Stacking of material properly at worksite.

Laying of foundation block for the pump set. Job include digging a pit as per the required size. Laying the RCC block as per the PWD norms. Providing & fitting, Grouting & fixing of fabricated 6 No’s 3’x5/8’’ foundation bolts, placing the base frame on the block with proper levelling with the help of levelling instrument. Complete job includes cost of material and labour charges.

Placing the HC Pumpset on the top of the base frame manually with proper levelling by way of adding shims etc so that pump and motor can be coupled without any offset. Fitting of the pumpset by using heavy duty nuts, bolts and washers with proper alignment.

Fabrication of suction pipes by way of providing of 4’’ dia M .S pipes and 12mm thick M/S. Flanges and fitting as per requirement at site. Providing and fitting of 4’’ dia G.I Pipe bends dully flanged as per requirement. P/F of 4’’ dia C.I Sluice valve of reputed make on suction pipe line by way of providing M.S. Flanges on its both ends. The job includes threading and welding of pipes with flanges .P/F of nuts, bolts and rubber gaskets.

Fabrication of Delivery pipes by providing of 4’’ Dia MS Pipes dia and 12mm thick M/S. Flange and fitting as per requirement at site. Providing and fitting of 4’’ dia G.I Pipe bends dully flanged as per requirement. P/F of 4’’ dia C.I Sluice valve of reputed make and 1 No 4’’ dia C.I reflex valve of reputed make on delivery pipe line by way of providing M.S. Flanges on its both ends. The job includes threading and welding of pipes with flanges .P/F of nuts, bolts and rubber gaskets.

Fabrication of the panel board made out of angle iron and having a size 6’x3’.The angle iron is to welded at corner properly and flushed in all the directions including its grinding or foiling to avoid body scratches. The panel board is to be surmounted with the ply of 12 mm thickness with some other insulating material on the top. The board shall have two legs at the corners and two legs to be welded / grouted with the wall of the pump room.

Providing and fitting of 200 Amp. Main switch, HRC type 415 Volts, ISI mark and make proper electrical connections with LT Cable and PVC Cable. Complete job including cost of material and labour type.

Providing and fitting of Multistrand PVC cable ( copper ) of multistrand PVC cable of 35 mm Sq from motor of new pump to Starter and from starter to Main switch .Also P/F of copper thimbles of adequate capacity, crimping of thimbles with crimping machine and taping of ends of PVC copper conductors. Complete job. (L=50Mtr)

Providing and fitting of 100 HP starter (star Delta) Job includes filling of transformer oil in starter dash pot up to the required level. Fixing of starter on panel board with fasteners and making the required electrical connections.

Providing and fitting of 100 Amp MCCB ISI Mark, making connection with incoming copper wire multistrand cable from main switch and outgoing to starter for automatic tripping.

Providing, Fitting and laying of 3.5 Core Armoured 185mm² Aluminium LT Cable (approx 25 mtrs) from LT fuse box to main switch. Job also includes Providing and fitting of thimbles as of required currentcarrying capacity. Rates are including cost of carriage and labour charges.

Painting of suction and delivery pipes with superior quality enamel paint after removing dust and other unwanted material from the surface.

Testing and commissioning of pump set on load. The job includes checking of alignment during operation of pump set, abnormal sound during operation, checking of leakage on suction and delivery side and plugging of the same thereafter providing and fitting of nuts and bolts, rubber sheet whenever required.

TRIKUTA ELECTRICAL AND MECHANICAL WORKS

BEE AAR ENTERPRISES