SITC of Vertical wet well type 2.15 cum pump (1 No) and SITC of complete discharge Bowl assy of 2.15 Cum (2 Nos) and 2.81 cum (1 No) at 19 M design head with other pump spares and SITC of double girder box type 15 Ton cap EOT crane at Rajiasar PS I o

S I T C of Vertical wet well type pump complete with Bowl assembly, column pipe, delivery Tee, motor stool, shafts, bearings, bearing housing, pressure gauges, Bearing temperature gauge, sole plate conforming to IS 1710, One complete spare set of sleeve and neoprene bush and min efficiency not less than 87 percent at Rated discharge and Static Head complete with all accessories as per specification and approved make, carrying of third party inspection, transportation up to site, loading, unloading, erection, commissioning, Testing , Three month trial run and one year defect liability. For Additional technical parameters of product / work refer Annexure A attached with this BSR For static head 17 meter to 20 meter Design discharge 2.12/2.15 cumec( 2.12 cumec , static head17.70 mtr )

Providing and Fixing of Shrouded Bus Bar (GI) type DSL system for EOT crane

Providing and Fixing of IK08, IP 66 protected 150 Watt High Power LED Flood Light with single piece Pressure die cast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles.BIS certified and Trade mark certified.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submittedMake- Bajaj/Philips/Crompton/Syska

Supply of P.V.C. / XLPE insulated and P.V.C. sheathed Armoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity greater than 99.6 percent, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 2CX4 Sq.mm

Supply of Galvanised iron Eathing strip of size 50 x 6 mm

Elec. Shock proof rubber matting 2000x1000x12 mm

Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ;& Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . - 1200 mm Sweep BEE 3 Star rated (service value >=5.0 to< 5.5 )Make- Bajaj/Crompton/Havells

Providing and fixing of ladder type cable tray with slotted rungs made of 2 mm hot dip galvanisedm.s.sheet as per IS 2629 tray of size 600MM(W) X100MM (Depth)

SITC of 200 AH capacity 2.0 Volt battery, SMF type of approved make as per existing system at site

SITC of Complete Discharge bowl assembly conforming to IS 1710 and min. efficiency not less than 87 percent having Rated discharge capacity and total static head complete with all accessories as per specification and approved make , including work of dismantling of existing pump , providing and replacement of Top shaft, intermediate shaft, various shaft sleeves, Rubber bearings and bushes, Muff couplers with thrust halfs, keys, High tensile Nut bolts for complete pump, One complete spare set of sleeve and neoprene bushand carrying of third party inspection, transportation up to site, loading, unloading, erection, commissioning Testing ,Three month trial run and one year defect liability. For Additional technical parameters of product / work refer Annexure A attached with this BSR For static head 17 meter to 20 meter Design discharge 2.12/2.15 cumec( 2.12 cumec , Static Head 17.70 Mtr )

SITC of Complete Discharge bowl assembly conforming to IS 1710 and min. efficiency not less than 87 percent having Rated discharge capacity and total static head complete with all accessories as per specification and approved make , including work of dismantling of existing pump , providing and replacement of Top shaft, intermediate shaft, various shaft sleeves, Rubber bearings and bushes, Muff couplers with thrust halfs, keys, High tensile Nut bolts for complete pump, One complete spare set of sleeve and neoprene bushand carrying of third party inspection, transportation up to site, loading, unloading, erection, commissioning Testing ,Three month trial run and one year defect liability. For Additional technical parameters of product / work refer Annexure A attached with this BSR For static head 17 meter to 20 meter Design discharge 2.81 cumec (Static Head 17.70 mtr)

Supply of Column pipe for VT pump complete matching with existing system, spider with neoprene rubber bush fitted and as per pre approved design drawings (Material M.S.) 2.12/2.81 cumec (75/100 cusec) pump of static head 17 to 20 meter ( Static head 17.70 mtr)

Providing and fixing of Thrust bearing housing for vertical wet well type pump with all accessories like complete non-reverse rachet plate arrangement, Bearings, oil retainer sleeve, retaining washer, adjusting nut(chuck nut) ,dial type temp. indicator, mounting cover, oil fill port with plug, oil level sight window assy as per existing pump including work of Decoupling of motor, removing of motor from stool, removing of coupling and bearing hub assembly, fitting of new Thrust bearing housing, recoupling and fitting of motor on stool, testing and trial of pump, work shall be carried out as per pre approved design drawings. 2.12/2.81 cumec (75/100 cusec) pump of static head 17 to 20 meter ( Static Head 17.70 mtr )

Providing and fixing of Gland packing Box for VT pump complete with all accessories like Grease cup with NRV, packing pieces, gland bush (Gun metal), Gland Box cap (gun metal) , water slinger assembly (C.I.), gasket etc, Decoupling of motor, removing of motor from stool, removing of coupling and bearing hub assembly, dismantling existing gland box from pump, fitting of new Gland packing Box , recoupling and fitting of motor on stool, testing and trial of pump. 2.12/2.81 cumec (75/100 cusec) pump of static head 17 to 20 meter ( Static Head 17.70 mtr )

Providing and fixing of Foundation girder set of VT Pump assembly including of Design, drawing, fabrication, transportation- supply, fixing as per existing Mechanical and civil structure, erection, testing, painting with applying two coat of zinc chromate red oxide primer and three coat of synthetic black enamel paint and complete commissioning all scope of works as per specification with removing of old set.

SITC of double girder box indoor type EOT crane having 7 metres span and 12-15 metres lift, pendent operated from floor, complete with all accessories and manual chain pulley block system 10 ton capacityas per specification and approved make confirming to IS:3177,3998,807,transporation, loading, unloading, erection, commissioning, Testing at site and one year defect liability SWL 15 tonne capacity

Providing and Fixing of Rail for Long travel of EOT crane for both side (60 m + 60 m= 120 m) bay length