REPLACEMENT REPAIRS TO INTERNAL WIRING AND FITTINGS AT AFS SAMBRA

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc complete.complete all as specified and directed.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders,bell push, bell, regulators, etc. complete.complete all as specified and directed.

M&L for cutting chasses, pinning in brick Masonry and making good the disturbed surfaces to match the existing surfaces where required and pointing in cement mortor 1:3 to ends for concealed wiring etc. complete all as specified & directed

M&L for surface point wiring for the following with PVC insulated and unsheathed multistranded 1.5 Sqmm FRLS copper Cable drawn in and including PVC casing capping of suitable size not less than 25mm width complete with all accessories including MS sheet metal 1.2mm thick switch board or PVC rectangular switch board of suitable size to be fixed on wall for fixing switches /sockets /regulators etc respectively including white washing/colour washing / distempering to match the adjoining surfaces including PVC insulated and unsheathed multi stranded 1.5 Sqmm FRLS copper Cable as earth continuity connected with common earth dolly complete for the following all as specified and directed :-

One light point/fan/bell point controlled by one switch

One 3 pin switch socket outlet, 5 Amps, independent

One light point controlled by two 2-way switches on independent board.

All as per Srl item No 4.00 herein before but point wiring with 2.5sqmm cable for one 3 pin socket outlet 16 Amps independent

S&F switch piano, flush type single pole, one way 5 Amps complete all as specified and directed.

S&F switch socket combination multipurpose 2 in 1, 5 pin, 5 Amps flush type complete all as specified and directed.

S&F switch piano, flush type single pole, Two way 5 Amps complete all as specified and directed.

S&F switch socket combination multipurpose 2 in 1, 5 pin 5 /15 Amps universal type controlled by one switch complete all as specified and directed.

S&F bell push, flush type, 5 Amps complete all as specified and directed.

S&F in repairs bell push, flush type, 5 Amps complete all as specified and directed.

S&F in repairs switch socket combination multipurpose 2 in 1, 5 pin 5 Amps flush type complete all as specified and directed.

S&F in repairs switch socket combination multipurpose 2 in 1, 5 pin 5 /15 Amps universal type controlled by one switch complete all as specified and directed.

S&F stepped type electronic fan regulator flush type (mini-switch type) 100 to 180 Watt surface type complete all as specified and directed.

S&F in repairs stepped type electronic fan regulator flush type (mini-switch type) 100 to 180 Watt surface type complete all as specified and directed.

S&F in repairs stepped type electronic fan regulator flush deluxe- socket type, 100 to 180 Watt complete all as specified and directed.

S&F electric call bell, Ding-Dong type, AC 230 volts, single pole including taking down old bell complete all as specified and directed.

S&F in repairs electric call bell, Ding-Dong type, AC 230 volts, single pole including taking down old bell complete all as specified and directed.

S&F in repairs Ceiling rose, surface type PVC, 50x25mm, three terminals complete all as specified and as directed.

S&F Ceiling rose, surface type PVC, 50x25mm, three terminals complete all as specified and as directed.

S&F in repairs switch piano flush button, single pole, two way, 5 Amps complete all as specified and directed.

S&F in repairs Modular Switch 1 way, 6Amps, 1 module, 230Volt AC, 50Hz complete all as specified and directed.

S&F in repairs Modular Switch 1 way, 16Amps, 1 module, 230Volt AC, 50Hz complete all as specified and directed.

S&F in repairs Modular Socket, 6Amps, 2/3 pin, 2 module, 230Volt AC, 50Hz complete all as specified and directed.

S&F in repairs Modular Socket 6A /16A - 2/3 pin, 2 module, 230Volt AC, 50Hz complete all as specified and directed.

S&F in repairs Modular Fan regulator, electronic, step type,120W, 2 module type complete all as specified and directed.

S&F in repairs LED light fitting 600mm x 600mm (2' x 2' ) Box type, 35/36watts, 220volt AC, recessed type with high efficiency PMMA diffuser soft glare free light with driver, holder LED lamp etc suitable for roof ceiling including connecting up with three core flexible copper conductor of suitable size complete all as specified and directed.

S&F LED light fitting 600mm x 600mm (2' x 2' ) Box type, 35/36watts, 220volt AC, recessed type with high efficiency PMMA diffuser soft glare free light with driver, holder LED lamp etc suitable for roof ceiling including connecting up with three core flexible copper conductor of suitable size complete all as specified and directed.

S&F in repairs LED recessed down light fitting 300mm x 300mm, 18 watts, 220volt AC, slim design, polycarbonate housing with superior light output and internal driver efficacy 100 lumen/watt complete all as specified and directed.

S&F in repair round shape LED light fitting 12 watts, 220volt AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder LED lamp etc suitable for roof ceiling including connecting up with three core flexible copper conductor of suitable size complete all as specified and directed.

S&F round shape LED light fitting 12 watts, 220volt AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder LED lamp etc suitable for roof ceiling including connecting up with three core flexible copper conductor of suitable size complete all as specified and directed.

S&F in repairs T5 LED tube rod, double side connection with LED driver suitable for installation in existing T-5 light fitting with G5 lamp holders complete all as specified and directed.

S&F in repairs LED light fitting 9/10 watt, surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver complete all as specified and directed.

S&F LED light fitting 9/10 watt, surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver complete all as specified and directed.

S&F in repairs CFL lamp holder PVC Batten / pendent / bracket type complete all as specified and directed.

S&F in repairs LED surface and wall mounted LED light fitting 20Watt with polycorbonate housing & integrated electronic driver complete all as specified and directed.

S&F LED surface and wall mounted LED light fitting 20Watt with polycorbonate housing & integrated electronic driver complete all as specified and directed.

S&F in repairs LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed..

S&F in repairs distribution board,double door, 12 way, SPN with 200 Amps rated bus bar 240 Volts including taking down old DB complete all as specified and directed.

S&F in repairs distribution board,double door, 08 way, SPN with 200 Amps rated bus bar 240 Volts including taking down old DB complete all as specified and directed.

S&F in repairs distribution board,double door, 04 way, SPN with 200 Amps rated bus bar 240 Volts including taking down old DB complete all as specified and directed.

S&F in repairs distribution board, double door, 04 way TPN with 200 Amps rated bus bar, 415 Volts including taking down old DB complete all as specified and directed..

S&F in repairs distribution board, double door, 08 way TPN with 200 Amps rated bus bar, 415 Volts including taking down old DB complete all as specified and directed.

S&F in repairs distribution board, vertical TPN, incoming 4 way, outgoing 12 way having powder coated sheet metal enclosure fitted with bus bar, din channel, neutral link earth link, IP 43 protection, and for accomodating MCCB including taking down old DB all as specified and directed

S&F in repairs distribution board, vertical TPN, incoming 8 way, outgoing 24 way having powder coated sheet metal enclosure fitted with bus bar, din channel, neutral link earth link, IP 43 protection, and for accomodating MCCB including taking down old DB all as specified and directed

S&F in repairs MCB Single pole, 240 volts 6 to 32 Amps, 10 KA rupturing capacity, 'C' curve including taking down MCB all as specified and directed

S&F in repairs MCB Single pole & neutral 240 volts 6 to 32 Amps, 10KA rupturing capacity C curve including taking down MCB all as specified and directed

S&F in repairs MCB triple pole & neutral 415 volts 40 Amps 10KA rupturing capacity, C curve including taking down MCB all as specified and directed

S&F in repairs MCB triple pole & neutral 415 volts 63 Amps 10KA rupturing capacity, C curve including taking down MCB all as specified and directed

S&F in repairs MCCB 100 Amps, 4 pole, 415 volts, 16KA rupture capacity fixed thermal magnetic release type complete all as specified and directed.

S&F in repairs MCCB 200 Amps, 4 pole, 415 volts, 36KA rupture capacity fixed thermal magnetic release type complete all as specified and directed.

S&F in repairs MCCB 250 Amps, 4 pole, 415 volts, 36KA rupture capacity fixed thermal magnetic release type complete all as specified and directed.

M&L for sub main wiring two single core PVC insulated cables with copper conductor 1100 Volts grade, 2.5 sqmm drawn through and including suitable size of non-metallic PVC rigid conduit and conduit accessories / casing and capping fixed up walls, roofs, or floors including one run of 2.5 sqmm PVC insulated cable earthing wire and connecting up complete including taking down of existing cable complete all as specified and directed. Note:- 3 runs of 2.5 sqmm cable and one run of PVC conduit / casing & capping will be measured as one unit length.

All as per Srl item No.53 above but 4 sqmm

All as per Srl item No.53 above but 6 sqmm

M&L for sub main wiring four single core PVC insulated cables with copper conductor 1100 Volts grade, 6 sq mm drawn through and including suitable size of non-metallic PVC rigid conduit and conduit accessories / casing and capping fixed up walls, roofs, or floors including one run of 6 sqmm PVC insulated cable earthing wire and connecting up complete including taking down of existing cable complete all as specified and directed. Note:- 5 runs of 6 sqmm cable and one run of PVC conduit / casing & capping will be measured as one unit length.

All as per Srl item No.56 above but 10 sqmm

S&F in repair PVC Presto plast box of size 8x10 inch including provision of cutting board for housing Switch/regulator or socket etc complete all as specified and directed. Note:- Switch/regulator /socket will be measured & paid seperately under relevant item of this schedule

S&F in repair PVC Presto plast box of size 4x6 inch including provision of cutting board for housing Switch/regulator or socket complete all as specified and directed. Note:- Switch/regulator /socket will be measured & paid seperately under relevant item of this schedule

S&F in repairs capacitor 2.5 mfd for ceiling fans complete all as specified and directed.

S&F in repairs three core flexible wire 0.5 Sqmm for connecting up ceiling fans, exhaust fans/wall mounting fan complete all as specified and directed.

S&F in repairs clamp (shackle) heavy duty steel & rubber clamp with nut, bolt, split pins, aluminium extruders etc complete all as specified and directed.

S&F in repairs down rod of ceiling fan of size 450mm long 15mm outer dia mild steel pipe including painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

Taking down and refixing of ceiling fan including transporting to local work shop and taking out the old burnt out copper winding wire from the fan of 1200/1400mm sweep and rewinding by using same gauge of copper wire insulating and varnishing, fixing new oil type capacitor (2.5mfd) and ball bearings/bush including cleaning, servicing, painting and testing, complete all as specified and directed.

Taking down and refixing of BLDC ceiling fan transporting to local work shop and taking out the old burnt out copper winding wire from the fan of 1200/1400mm sweep and rewinding by using same gauge of copper wire insulating and varnishing, fixing new fan magnet ring rotor, new controller driver, new PCB, ball bearings/bush including cleaning, servicing, painting and testing, complete all as specified and directed.

Taking down and refixing of exhaust fan of 350/380mm sweep including transporting to local work shop and taking out the old burnt out copper winding wire from the Exhaust fan and rewinding by using same gauge of copper wire insulating and varnishing, fixing new oil type capacitor (4mfd) and ball bearings/bush including cleaning, servicing, painting and testing, complete all as specified and directed.

Taking down and refixing of exhaust fan of 450mm sweep including transporting to local work shop and taking out the old burnt out copper winding wire from the Exhaust fan and rewinding by using same gauge of copper wire insulating and varnishing, fixing new oil type capacitor (4mfd) and ball bearings/bush including cleaning, servicing, painting and testing, complete all as specified and directed.

S&F in repairs Capacitor 4 mfd for Exhaust fan complete all as specified and directed.

S&F in repair louvers made out of 18 SWG MS sheet suitable for 300 /380 mm sweep exhaust fan including fixing on wall complete all as specified and directed.

S&F in repair louvers made out of 18 SWG MS sheet suitable for 450mm sweep exhaust fan including fixing on wall complete all as specified and directed.

Taking down and refixing of air circulators of 650mm sweep including transporting to local work shop and taking out the old burnt out copper winding wire from the air circulators and rewinding by using same gauge of copper wire insulating and varnishing, fixing new oil type capacitor and ball bearings/bush including cleaning, servicing, painting and testing, complete all as specified and directed.

Taking down and refixing of wall mounting fans of 400mm sweep including transporting to local work shop and taking out the old burnt out copper winding wire from the wall mounting fans and rewinding by using same gauge of copper wire insulating and varnishing, fixing new oil type capacitor and ball bearings/bush including cleaning, servicing, painting and testing, complete all as specified and directed.

S&F in repair hyleum sheet of size 4"x4" including cutting and fixing of P/T switch, socket, regulator etc complete all as specified and directed . Note - P/T switch / regulator /socket will be measured & paid seprately

S&F in repair hyleum sheet of size 4"x6" incl cutting and fixing of P/T switch ,socket, regulator etc. complete all as specified and directed Note -P/T switch / regulator /socket will be measured & paid seprately.

S&F in repair hyleum sheet of size 4"x8" incl cutting and fixing of piano type switch ,socket, regulator etc. complete all as specified and directed Note -Piano type switch / regulator /socket will be measured & paid seprately.

S&F in repairs adjustable fan blade, heavy quality, white colour suitable for ceiling fan 1200mm sweep complete all as specified and directed.

S&F in repairs Single pole and neutral enclosure with a two pin and earth plug and socket (IP-44) complete with one single pole MCB, 20 Amps, 240 Volts 'C Curve' complete all as specified and as directed. Note:- (i) The industrial grade socket should be compatible for 3 Pole (Phase, Neutral and Earth) IEC60309 standards compliant plug. (ii) All the contacts shall be of brass type. The enclosure material shall be of PC/ABS type

S&F in repairs Triple pole and earth enclosure with three pin and earth plug with socket (IP-44) complete with one triple pole MCB, 20 A, 240 Volts 'C Curve' complete all as specified and as directed.

S&F in repairs PVC casing capping exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc of size 25 mm dia complete all as specified and directed

S&F in repairs Rigid non-metallic PVC conduit 25mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed

S&F in repairs 3 core 2.5 Sqmm PVC inner sheathed un armoured copper cable 1100V grade ISI marked complete all as specified and directed.

S&F in repairs 3 core 4.0 Sqmm PVC inner sheathed un armoured copper cable 1100V grade ISI marked complete all as specified and directed.

M/s ASPIRE ENGINEERING ENTERPRISES

DHAIRYASIL RAMAKANT DESAI

RAJENDRA KRISHNA SARAF

SHIVANI ENTERPRISES

M/s. VIJAY ELECTRICALS

ASHIRWAD ELECTRICALS

Vinod Enterprises