SPECIAL REPAIRS TO BUILDING NO T 100 AND CERTAIN OTHER REVENUE AND MINOR WORKS AT AIZAWL UNDER GE SILCHAR

Amount

PART-I (B/R WORKS) Excavating in post holes (or similar holes) each n exc 0.5 cum each, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft / loose soil , complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil , complete all as specified and directed.

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc. and getting out in soft / loose soil complete all as specified and directed.

Excavation over areas, n exc 1.5 m deep and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in with soil obtained from excavation including spreading levelling watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Demolition of plain cement Concrete ( unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 and not exc. 4sqm each complete all as specified & directed.

Dismantling floor hearth or wall tiling including cement mortar bedding ( not hacking) removing serviceable tiles to store and rubbish off the permises, complete all as specified and directed.

Taking up and down PVC (SWR) pipe 110/100 mm bore/ Dia incl all fitting from any position complete all as specified and directed.

Taking up and down steel tubing and connections, including cleaning for refixing or removal to store 80 mm bore pipe, complete all as specified and directed.

All as per item no. 12 above but of size 50 mm bore.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings or wall cladding complete all as specified & directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed

Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but exluding ashlars facings, dressed stone work and pre-cast concrete articles complete all as specified & directed.

M&L for Pre-cast cement concrete block masonry PCC 1:2:4 type B-2 with solid blocks, exc. 10 cm in width and setting in mortar 1:4 , complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 ( using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 ( using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or secruing with clips complete all as specified and directed.

All as per Srl item No 22 above but but 6 to 8 mm dia.

All as per Srl item No 22 above but but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Material and labour for formwork to sides of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for rough finished flat surface of concrete complete all as specified and directed.

Material and Labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and directed.

Material and Labour for Formwork to suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed.

Material and Labour for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete complete all as specified and directed.

Material and Labour for Formwork to chullah hoods, chajjas, troughs and similar items including edges. for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for RCC Design mix (M-25) using 20 mm graded aggregate in foundations, including rafts, as in footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC Design mix (M-25) using 20 mm graded aggregate in foundations, including rafts as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC Design mix (M-25) using 20 mm graded aggregate in chajja complete all as specified and directed.

M&L RCC Design mix (M-25) using 20 mm graded aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L RCC Design mix (M-25) using 20 mm graded aggregate in beams, cantilevers, bressummers, lintels over 1.50 mtr span complete all as specified and directed.

Material and labour for of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface ® using broken stone or boulders complete all as specified and directed.

Supply and fix Framed work such as grills, gratings, etc. with ends of bars or forged into spikes, framed guard bars, barred iron doors; ladders; framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe 290 Gde E-165, complete all as specified and directed.

Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completek con- forming to Fe 410 Gde E-250 quality- B , complete all as specified and directed.

Supply and fix Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements complete all as specified and directed.

Supply and fix Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door frames with one or more rebates including hinges (100/50mm stainless steel),lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

Supply and fix PVC door frame of size 50 mm X 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified & directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Supply and fix 35 mm thick 2nd class hard wood as in Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats supplied and fitted to chowkats complete all as specified.

Supply and fix 30 mm thick 2nd class hard wood as in Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. if windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b); supplied and fitted to chowkats supplied and fitted to chowkats complete all as specified.

Supply and fix 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidesupplied and fitted to chowkats supplied and fitted to chowkats complete all as specified.

Supply and fix 100mm mild steel butt hinges medium weight complete all as specified and directed.

Supply and fix 150 mm long aluminium handle cast type anodised complete all as specified & directed.

Supply and fix 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified & directed.

Supply and fix 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified & directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm , complete all as specified and directed.

Supply and fix 300mm brass , ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed.

Supply and fix for 1 mm thick Mild steel sheet as in eaves gutters, galvanised class 3, half round with rounded edges complete all as specified and directed.

Supply and fix 3.00 mm thick sheet galss ordinary quality and glazing with oil putty in square not exc. 0.50 sqm in each pane, complete all as specified and directed.

M & L for Anodised aluminium snap grid frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long as specified Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and directed.

S&F Non Skid ceramic tiles colour 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed or bedding layers in cement mortar 1:6 including brushing with neat cement slurry with 3 Kg of cement per sqm complete all as specified and directed.

S&F 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window-cover & including 15 mm thick screed bed or bedding layers in cement mortar 1:4 complete all as specified and directed.

M&L for coloured glazed ceramic tiles (450x300) 7mm thick on vertical surface such as skirting, dados, risers etc. set and jointed in neat cement slurry and pointed in coloured cement or pigment to match colour tiles over & incl 10 mm thick screed layer in CM 1:4 complete all as specified and directed.

Material and labour brick work with sub class ‘B’ brick straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

Material and labour for half brick work with sub class ‘B’ brick straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and directed.

Material and labour for rendering 15 mm thick cement rendering on fair faces of brick wall or concrete surfaces in CM (1:6) finished fair and even complete all as specified & directed.

Material and labour for rendering 10 mm thick cement rendering on fair faces of brick wall or concrete surfaces in CM (1:4) finished fair and even complete all as specified & directed.

M&L rendering 15 mm thick cement rendering in two layer each of 10+5 mm thick on fair faces of brick wall or concrete surfaces in CM 1:4 & water proofing compound mixed with second layer @ 3% finished even and fair complete all as specified & directed. Note -WPC shall be measured and paid separetly.

Supply only WPC complete all as specified and directed.

Material and labour for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

M&L 25 mm thick sand filling under floors or in foundation including watering levelling and consoliation as directed complete all as specified and directed.

M&L rubber moulded reflective type chequered cement concrete tiles 300 x 300 x 25 mm thick set , jointed & pointed in neat cement slurry as in floor with white cement & pigment to match colour of tiles over & including 15 mm thick screed bed or bedding layers in cement mortar 1:6 including brushing with neat cement slurry with 3 Kg of cement per sqm complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block coloured pre polished (rubber moulded) any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade with proper jointing, pointed with grey cement and pigment complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate in surface channels and drains complete all as specified and directed.

Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified & directed.

Material and labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes using steel conforming to IS.1161- 1979 grade St.-240 complete all as specified & directed.

Material and labour for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains;hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Supply only 11 to 15 mm dia MS screw bolts (machine made ) with hexagonal or square heads at one end & screwed the other or screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut length of bolt exceeding 5 cm long but not exceeding 10 cm long complete all as specified and directed.

Material and labour for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified & directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone as in sub base of floor complete all as specified and directed.

Material and labour for 50 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone as in floor finished even & smooth without using extra cement complete all as specified and directed.

Material and labour for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone as in floor finished even & smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid in panels and joints filled with bituminous mastic filling with 1 part of bitumen and 3 part of sand complete all as specified and directed.

S&F GI tube 15 mm bore (ISI Marked) medium grade galvanished with all fittings laid in floors or fixed to wall etc. complete all as specified and directed.

S&F GI tube 20 mm bore (ISI Marked) medium grade galvanished with all fittings laid in floors or fixed to wall etc. complete all as specified and directed.

S&F for 15mm bore Stop valves, CP fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply and fix 15 mm bore bib tap long body and fancy type, chromium plated, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix 15 mm bore pillar tap long body and fancy type, chromium plated, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fix, as in repair, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor complete all as specified and directed.

S & F PVC connections 15 mm size with PTMT nuts , length 450 mm complete all as specified and directed.

Supply only 10 ltrs capacity PVC valveless syphonic action type, low level flushing cistern, white with inlet, ball valve float and handle including brackets and 32 mm dia PVC low or high density flush pipe complete all as specified & directed

Supply & fix PVC (SWR) P trap 75 mm outlet diameter including jointing with solvent cement complete all as specified and directed.

Supply & fix Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fix, white vitreous china wash basin of size 630 mm x 450 mm including brackets ,cutting for and pinning in ends of brackets complete all as specified & directed.

Supply & fix Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

Supply and fix 110 mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints,fixed to walls with suitable size of clamps , nuts bolts complete all as specified and directed.

Supply and fix 75 mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints,fixed to walls with suitable size of clamps , nuts bolts complete all as specified and directed.

Supply & fix PVC (SWR) Pipe 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

Supply and fix Soap dish, Chromium plated fixed with CP brass screws complete all as specified & directed.

M&L for brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges as in repairs complete all as specifed and directed

Supply and fix 110 mm bore PVC (SWR) S trap complete all as specified & directed.

Supply and fix 110 mm bore PVC (SWR)WC connector with lip ring complete all as specified & directed.

Supply and fix 110 mm bore PVC (SWR) reducers complete all as specified & directed.

Supply and fix 75 mm bore PVC (SWR) cowl complete all as specified & directed.

Supply and fix 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

Supply and fix 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

Supply and fix 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fix 1000 Ltr Rotaional moulded polyethylene water storage tank cylindrical vertical with closed top hoisted and fixed in position fixed in repairs complete all as specified and directed.

Material and labour for preparation of plastered or un plastered surfaces of walls and applying two coats of cement paint, over one coat of primer ocomplete all as specified and directed.

M&L for preparation of plastered or un plastered surfaces of walls and applying two coat of oil bound distemper (white or tinted) over one coat of chalk whiting on wall over putty to make surface even and smooth, complete all as specified and directed.

M & L for preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed

M & L for preparation of plastered surfaces and applying Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) ® complete all as specified and directed

M&L for preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm in width or girth & applying two coats synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm in width or girth & applying two coats synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

PART-II (E/M WORKS) Taking down carefully copper/aluminum existing point wiring (light/fan/socket or power points) complete incl wooden battens/casing capping or conduit etc (without disturbing existing fittings point wiring etc) and all connected fittings such as switch, socket, ceiling rose, lamp holder, brackets ceiling fittings, bulk head fittings and fan regulator etc and making good to disturbed surfaces of wall floor etc complete all as specified and directed.

Dismantling of old unserviceable main switches DBs, MCB enclosures, electric meter, PVC rectangular blocks etc and keeping in safe custody either for reuse or for disposal Including making good to the disturbed surface of wall complete all as specified and directed.

M&L for Point wiring using 1100 volt grade FRLSH PVC insulated unsheathed multi strand copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLSH PVC insulated unsheathed multi strand 1100 volt grade copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box , connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc for one light/fan/bell point complete all as specified and directed.

All as per item No. 117 above but for 5 Amps socket Point (Same board), complete all as specified and directed

All as per item No. 117 above but for 5 Amps socket Point (Independent board), complete all as specified and directed

All as per item No. 117 above but for one three pin 15 Amps socket outlet on independent board with 1100V grade PVC insulated and unsheathed 4 Sqmm multi strand FRLS copper conductor cable and PVC insulated and unsheathed multi strand copper conductor 4 Sqmm as earth continuity conductor drawn complete all as specified and directed.

Supply and fix Ceiling rose, PVC/ polycarbonate, isolated body complete all as specified & directed.

S & F modular stepped type electronic fan regulator flush type socket type 02 module complete all as specified and directed.

S&F Modular switch 1 way 6A, 1 module complete all as specified and directed.

S&F Modular socket 6/ 16A, 2 module complete all as specified and directed.

S&F Modular socket 6A, 2 module complete all as specified and directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and directed.

S&F lamp holder angular/batten/ Pendent insulated body with back plate for batten fittings with and incl 10 W LED lamp/bulb complete all as specified and directed.

S & F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size with LED complete all as specfied and directed. Make : Havells Cat Part No. HEXAFIT10WLED857SSYMBOPC or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Crompton

S&F for decorative bracket wall light fittings holder type made up of PVC/Polycarbonate with and incl 10 W LED lamp/bulb complete all as specified and directed. complete all as specified and directed. Make : Havells Cat Part No. LHFOFWE1TZ1W012 or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Crompton Greaves

S&F modular blank plate fixed in repair complete all as specified and directed.

S&F modular Metal flush box 3 module alongwith White cover plate with frame complete all as specified and directed.

S&F modular Metal flush box 4 module alongwith White cover plate with frame complete all as specified and directed.

S&F modular Metal flush box 6 module alongwith White cover plate with frame complete all as specified and directed.

S&F modular Metal flush box 8 module ( vertical /horizontal) alongwith White cover plate with frame complete all as specified and directed.

Supply and fix plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed. Make :-Crompton Cat aprt No BRISK AIR NEO or equivalent in Havells / Bajaj / Orient

Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep min air delivery 210 CFM with service value 6.00 BEE, 5 star rated connecting from ceiling rose to fan and taking down of old unserviceable fan complete all as specified and directed. Make BAJAJ , Speedster X BBD 1400 mm Ceramic White CF or equivalent.

S&F LED linear light fittings 20 Watt basic all purpose surface and wall mounted and LED batten with polycarbonate housing and intrigated electronic driver and connecting with & incl 3 core flexible copper cable PVC insulated of size 16/0.20 mm etc complete all as specified and directed. Make:- Crompton Greaves Cat No. LDLSR20-CDL or equivalent to Bajaj/ Philips/Wipro/Syska LED/ M/s Jaquar & Company Pvt Ltd/ Havells

Supply and fix sheet metal enclosure powder coated DB for fixing of MCBs, TPN 4 ways double door with 200 Amp rated bus bar, 415 Volts complete all as specified and directed.

Supply and fix sheet metal enclosure powder coated single phase and neutral DB for fixing of MCBs, 8 way double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.

Supply and fix MCB SP 240 volts, 50 Hz of capacity 6 -32 Amps C- series complete all as specified and directed

Supply and fix MCB SPN 240 volts, 50 Hz of capacity 6 -32 Amps - series complete all as specified and directed

Supply and fix MCB TPN 240 volts, 50 Hz of capacity 63 Amps - series complete all as specified and directed

M & L for circuit /submain wiring along with earth wire 4 run of 10 Sqmm PVC FRLSH insulated unsheathed cable multi-strand copper conductor including 1 x 10 Sqmm PVC insulated unsheathed multi strand copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box , connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing incl taking down old unserviceable submain wiring complete all as specified and directed. Note: four run of single core cable and one run of earth wire will be mearsured as one length

Supply and fix bldg security light fitting 20 watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection, complete all as specified and directed. Make : Crompton Greaves Cat Part No. LSTS-20-CDL-M or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Havells

Material and labour for laying of bricks locally available sub-class 'B' brick (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the directon of cable complete all as specified and directed.

Supply and spread sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. Note : Thickness of sand cushion after punning down will be measured and paid.

Material & labour GI tube light grade 40 mm for protection of UG cable including dismantling of old unsv pipe complete all as specified and directed.

Supply, fixing, commioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 10 Sqmm 2 core laid in trenches/fixed to wall/under road/pipe etc with and including copper cable glands & copper thimbles complete all as specified and directed.

Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to earth wire 4 mm dia GI wire with mild steel nuts bolts checknuts & washers and connected to equipment as directed incl funnel with Gi medium grade watering pipe 20 mm bore , wire mesh , charcoal or coke and commn salt in alternate layers of 15 cm compacted thickness all around the earth electrode with concrete pit in PCC 1:3:6 type C-1 with 50 mm thick precast RCC cover in PCC 1:2:4 type B-1 cover slab reinforced with 8 mm dia deformed bars @ 15 cm c/c with suitable handle of 10 mm dia round bar , 15 mm bore medium grade pipe for earth lead protection incl necessary excavation and earth wok in soft / loose soil and disposal of spoil to a distance n exc 50 m and necessary testing complete all as shown in electrical plate No 3 of MES SSR Part-I complete all as specified and directed.

Dismantling of house service bracket any type & shape complete all as specified and directed.

M/S RAJU ENTERPRISES AND BROS

Younus Khan

MS AFTAB LASKAR

M/S TAPAN KUMAR RAY

M/S SUBHAM ENTERPRISE

M/S SANJIB DEB