Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.3 LAccepted-AOC BHANDARI NIWAS BHARAT NAGAR TEH DISTT PATHANKOT PIN 145023 | PATHANKOT | PATHANKOT | PUNJAB | 145023 | ₹21.3 L | L1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates |
| 2 | L2₹22.7 LRejected-Finance NH 44 BUILDING COLONY NO 01 SUJANPUR TEH DISTT PATHANKOT PUNJAB 145023 | PATHANKOT | PATHANKOT | PUNJAB | 145023 | ₹22.7 L | L2 | Rejected-Finance Higher side quoted amount |
| Sl No | Description | Qty | Unit | HARI OM ENTERPRISES L2 | M/s GIrdhari Lal Rakesh Kumar L1 |
|---|---|---|---|---|---|
| 1.00 | Sch 'A' Part-I B/R Part:-
Demolition of RCC work, Roofs, floors , beams staircases, landing, chajjas, & similar suspended work cement concrete is reinforced (reinforcement cut as required to facilitate demolition) | 3.39 | Cum | 555 ₹1,881.45 | 555 ₹1,881.45 |
| 2.00 | M&L for reinfornced cement concrete nominal mix 1 : 1.5 : 3, type B-1 (using 20 mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as pecified and directed.. | 1.73 | Cum | 12,000 ₹20,760 | 7,777 ₹13,454.21 |
| 3.00 | Use and waist of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter flat rough finished surface of concrete complete all as specified and directed. | 5.76 | Sqm | 222 ₹1,278.72 | 222 ₹1,278.72 |
| 4.00 | M&L for reinfornced cement concrete nominal mix 1 : 1.5 : 3, type B-1 (using 20 mm graded crushed stone aggregate) as in Columns, pillars, piers, posts and struts complete all as pecified and directed.. | 1.08 | Cum | 12,000 ₹12,960 | 7,777 ₹8,399.16 |
| 5.00 | Use and waste form work to sides of pillars, posts, structs, piers, columns and stanchions square, rectangular or polygonal rough finished surfaces of concrete complete all as specified and directed. | 14.4 | Sqm | 333 ₹4,795.20 | 222 ₹3,196.80 |
| 6.00 | M&L for reinfornced cement concrete nominal mix 1 : 1.5 : 3, type B-1 (using 20 mm graded crushed stone aggregate) as in roof Beams, cantilevers, bressumm ers, lintels over 1.5m span complete all as pecified and directed.. | 1.08 | Cum | 12,000 ₹12,960 | 7,777 ₹8,399.16 |
| 7.00 | Use and waist of form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. | 14.4 | Sqm | 333 ₹4,795.20 | 222 ₹3,196.80 |
| 8.00 | M&L for reinfornced cement concrete with nominal mix 1 : 1.5 : 3, type B-1 (using 20 mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as pecified and directed.. | 1.13 | Cum | 9,000 ₹10,170 | 7,777 ₹8,788.01 |
| 9.00 | Use and waist of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) → | 9 | Sqm | 444 ₹3,996 | 222 ₹1,998 |
| 10.00 | Use and waist of form work to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide | 12 | RM | 111 ₹1,332 | 222 ₹2,664 |
Updated dates
Tender Value
₹23.7 L
EMD Value
₹47,480
Closing Date
16 Mar 2026, 6:00 pmClosed
GE(WEST)PATHANKOT
GE(WEST)PATHANKOT
SPL REPAIR TO BLDG No. T-9 AND T-18 AT ASPI UNDER GE (W) PATHANKOT
2026_MES_752858_1
GE/PKT-104/2025-26
Open Tender
Miscellaneous Works
180 days
Pathankot
As per tender and NIT documents
8 documents required · 8 mandatory
₹500
Pathankot
₹47,480
Yes
6 May 2026
16 Feb 2026
18 Mar 2026
16 Feb 2026
16 Mar 2026
2 Mar 2026
Sch 'A' Part-I B/R Part:- Demolition of RCC work, Roofs, floors , beams staircases, landing, chajjas, & similar suspended work cement concrete is reinforced (reinforcement cut as required to facilitate demolition)
M&L for reinfornced cement concrete nominal mix 1 : 1.5 : 3, type B-1 (using 20 mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as pecified and directed..
Use and waist of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter flat rough finished surface of concrete complete all as specified and directed.
M&L for reinfornced cement concrete nominal mix 1 : 1.5 : 3, type B-1 (using 20 mm graded crushed stone aggregate) as in Columns, pillars, piers, posts and struts complete all as pecified and directed..
Use and waste form work to sides of pillars, posts, structs, piers, columns and stanchions square, rectangular or polygonal rough finished surfaces of concrete complete all as specified and directed.
M&L for reinfornced cement concrete nominal mix 1 : 1.5 : 3, type B-1 (using 20 mm graded crushed stone aggregate) as in roof Beams, cantilevers, bressumm ers, lintels over 1.5m span complete all as pecified and directed..
Use and waist of form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.
M&L for reinfornced cement concrete with nominal mix 1 : 1.5 : 3, type B-1 (using 20 mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as pecified and directed..
Use and waist of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) →
Use and waist of form work to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide
M&L for TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for 15mm thick cement plaster in cement mortar (1:6) on fair faces of brickwork or concrete surfaces and finished even and smooth without using extra cement .
M&L for applying 1.5 mm thick one coat of white wall care putty on wall , new or old surfaces of any description finished even and smooth complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with roller over one coat of alkali resistant primer including application of 3mm wall care putty for smooth finish.etc complete all as specified and directed .
M&L for preparation of old plastered surfaces of walls and applying two coats of oil bound distemper with roller over one coat of alkali resistant primer smooth finish.etc complete all as specified and directed .
M&L for rendering 5 mm thick on fair faces of concrete surface of ceiling in CM 1 : 3 and finishing even and smooth without using extra cement complete all as specified and directed..
M&L for Preparation of new surfaces of ceiling and application of three coats of white washing completed as specified and directed.
M&L for Preparation of old surfaces of ceiling and application of three coats of white washing completed as specified and directed.
M&L for rendering 20mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 mixed with WPC @ 3 % by the weight of cement used and finishing even and smooth without using extra cement complete all as specified and directed..
M&L for preparation of NEW plastered walls surfaces & applying two coats of chemical waterproofing treatment (601 raincoat of pidilite or equivalent) on wall & chajja, terrace & parapet wall, such as Flexcoat, Beckcoat, Exshield etc or equivalent including filling of cracks in walls/concrete with " Crack-X" of pidilite or equivalent complete as per manufactures instructions, all as specified and directed.
M&L for complete removal of existing surfaces including washing / rubbing down with water of wall and applying two coats of chemical waterproofing treatment (601 raincoat of pidilite or equivalent) on wall & chajja, terrace & parapet wall, such as Flexcoat, Beckcoat, Exshield etc or equivalent including filling of cracks in walls/concrete with " Crack-X" of pidilite or equivalent including preperation of OLD surfaces complete as per manufactures instructions, all as specified and directed.
Supply only liquid water proofing compound all as specified and as directed.
Demolition of brick work built in CM incl. taking out roots vegetation if any at any position and removal to out side MD land
M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in CM(1:6) complete all as specified
M&L for Brick work with sub class 'B' bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for , rubbish off the premises complete all as specified and directed
M&L for PCC 1:2:4 type B-0 ( using 12.5mm graded crushed stone aggregate) padding as roof , surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for 10mm thick cement plaster in cement mortar 1:3 concrete surface finished even and smooth as on roof mixed with with WPC as per manufacturer's instruction complete all as specified & directed.(WPC measured & paid separetaly)
M&L for liquid water proofing treatment to RCC roof slab incld dismantling of existing treatment of any description in following procedure : (a) Laying 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement on fair faces of concrete roof surfaces , finished even and fair to receive treatment on roof Complete (b) Applying first coat fiber reinforced elastometic liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with sun reflective index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 Mpa and shall have reack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree celsius with 3.3% dilution as priming coat (c) laying of fiber mesh 0.3mm thickness weave in leno pattern having weight 4.5 gm/ Sqm and pasting it properly with overlap of 50mm and allow it to dry (d) Applying second coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge (e) Applying third and final coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster)
M&L for preparation and cleaning new rcc of inside surfaces of wall, bottom of Dome of Over Head , or UG Sump , Swimming pool Reservoir Tank by brush and reating surfaces with the methodology as under :-(a) Seal sanitary pipes entering through the walls and floor with Dr. Fixit Bathseal Tape (or equivalent as approved by GE) and grout the gaps with Dr.Fixit Bathseal grout - a non shrink cementitious grout (or equivalent as approved by the GE).(b) Apply the first coat of Dr. Fixit Fastflex (or equivalent as approved by GE) maintaining the saturated surfaces in dry condition.(c) Embed a glass fibre mesh measuring 50 gsm over and including the angle fillets as a reinforcing strip and allow it to soak completely.(d) Immediately apply the second coat of Dr. Fixit Fastflex (or equivalent as approved by GE) to sandwich this glass fibre mesh between these two coatings.(e) Apply the third coat of Dr. Fixit Fastflex (or equivalent as approved by GE) and sprinkle coarse sand while it is still wet.(f) Subsequent to above, apply first brush coat of Dr. Fixit Dampguard (or equivalent as approved by GE). Allow drying for 6 to 7 hours then apply second brush coat of Dr. Fixit Dampguard (or equivalent as approved by GE). Allow it to sure completely set in position for 24 hours before using.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed.
M&L for PCC 25 mm thick type B-0, 1 : 2 : 4 (using 12.5 mm graded crushed stone aggregate) as in sub flooring complete all as specified and directed..
M&L for Non abrasive paving cement concrete coloured tiles 300 mm x 300 mm x 10 mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15 mm thick screed bed in cement mortar 1:4 including demolition/dismantling old surface/tiles complete all as specified and as directed. Note:-The texture , colour, size ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE.
M&L for glass mojak tiles coloured tiles 7 to 8 mm thick (square/reactangular) area area of each tile exc 0.06 Sqm but not exc 0.11 Sqm , for swimming pool flooring finishes set and joineted in neat cement slurry and pointed in white or colured cement to match over incl 15 mm thick screed bed in cement mortar 1:4 including finishing even and fair complete all as specified.
All as per srl item No 34.00 here-in-before but in vertical surfacearea
M&L for Non-Skid ceramic coloured tiles 7 to 8 mm thick (square/reactangular) area of each tile exc 0.42 Sqm but not exc 1.00 Sqm, in floor fixing with spacer and filing epxy grouting to match over incl 15 mm thick screed bed in cement mortar 1:4 including finishing even and fair complete all as specified.
All as per srl item No 36.00 here-in-before but in vertical surfacearea
Excavating in post hole or similar hole each n.exc. 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc. 25 cm, watering and removing surplas soil to adistance not exc. 50 mtr and making good surface in hard / dense soil complete all as specified and as directed by Engg-in-Charge.
Dismantling stainless/mild steel work of any description not otherwise provided for including grills, door, truss, gate, rafters, purlins etc
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. Note:-Purchase voucher of full Qty of work done should be submitted alongwith any intermediate payment duly defaced by the Engg-in-charge.
Dismantling timber scantling 40 Sq cm and over in section, in any position framed work complete all as specified and directed
S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;l adders; framed balusters; walk ways; railings; framework of water tanks, cattle trap and similar work conforming to Fe.290.Gde-E-165,ornamental and intricate design complete all as spd and directed.
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracketframing (Beam, tee, angle, channel or flat sections) Fe410 gde E-250 quality B including distance pieces, cleats etc..
M&L for preparation of newly steel and iron surface of any description width or girth exc 10 cm and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Dismantling of Asbestos/fibre cement/PVC sheet (corrugated,semi corrugated, etc.) sheets in roof coverings including ridges etc.
M&L 0.56 mm Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) fix with screw coach screw and washer in roof, wall etc.
S&F galvalume aluminium zinc coating corrugated curved Roofing sheet steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed by Engr-In-Charge.
M&L for 35mm thick precast cement concrete louvers and jallies (measured solid) in 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate set in cement mortar 1:4, including all mouldings but excluding frame complete all as specified and as directed. Note: Pre-cast frame shall be measured separately & demolition will be measured with demolition of RCCwork.
Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore15mm complete all as specified. -
S&F Steel water tubing medium grade galvanised with all fittings including short length , fixed to walls and ceiling and laid in floor complete with all fittings (such as bends, elbows, Tee , short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore dia 15mm complete all as specified.
Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore20 mm complete all as specified. -
S&F Steel water tubing medium grade galvanised with all fittings including short length , fixed to walls and ceiling and laid in floor complete with all fittings (such as bends, elbows, Tee , short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore dia 20mm complete all as specified.
Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 25 mm complete all as specified. -
S&F Steel water tubing medium grade galvanised with all fittings including short length , fixed to walls and ceiling and laid in floor complete with all fittings (such as bends, elbows, Tee , short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore dia 25mm complete all as specified.
Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 40 mm complete all as specified. -
S&F Steel water tubing medium grade galvanised with all fittings including short length , fixed to walls and ceiling and laid in floor complete with all fittings (such as bends, elbows, Tee , short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore dia 40mm complete all as specified.
S&F rotational moulded polythylence water storage tanks 1000 Ltr cylindrical vertaical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 1000 ltrs including disconnecting the unserviceable existing tanks complete screwed for iron pipe or brass ferrule directed
S&F Ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete 25mm dia complete all as specified and directed.
M&L for Nipple suitable for HDPE water tank (minimum weight 25mm - 65 gms) 25mm bore dia complete all as specified and directed
M&L for PVC single piece slim concealed cistern body with installation kit & P type drain pipe connection set for wall hung WC flushing cistern, with inlet, ball valve, float including fiush control plate and flush pipe and fixed in repairs complete all as specified and directed.
S&F in repair EWC wall hung WC With in built jet pp soft close silm seat hinges hind ware wall hanging type with plastic sheet cover all as specified and directed of size (H x W x P) 365 x 525 x 400 mm with ‘P’ trap distance 22.5 cm complete all as specified and directed.
S&F in repair pillar tap 15 mm bore tall body Single Lever Basin Mixer hot and could without Popup Waste with 450mm Long Braided Hoses
S&F in repair Wash basin, Vitreous China white (Flat back) 400 x 500 mm including fixing granit top counter basin including fixing of waste pipe,granit,wast cuppling and etc ( Suppy of pillar tap shall be measured separately) complete all as specified and directed.
S&F in repair stop valves 15mm bore dia, cast copper alloy fancy type, chromium plated with long shank and cup concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions in repairs complete all as specified and directed.
S&F in repair 32 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 PVC bends including all necessaryfixed complete to walls, ceilings or in floors etc.
S&F in repair bib tap brass 15mm bore dia chromium plated long shank fancy type 2-way Bib Cock with Wall Flange screwed for iron pipes complete in repairs complete all as specified and directed.
S&F in repair bib tap ,15 mm, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed.
S&F in repairs brass chromium plated bathroom wall (wall mounted model) mixture with telephonic shower arrangement with swivel wall hook with and including old Victorian design telephone shower with 12mm dia 1.5m long flexible tube and swivel hook etc. complete all as specified and directed.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
Exavating in trenches in Hard / dense soil n. exe 1.5 m wide and n. exe 1.5 m in depth, for foundation etc or for shafts, wells, cess pits, man holes, pier holes etc n exe 10 sq m on plan n exe 1.5 m depth and getting out complete all as specified and directed
Returning, filling in Hard / dense soil , including spreading, levelling, watering and well raming in layer not exe 25cm complete as specified and directed.
Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed of material ourside MD land complete as specified and directed.
M&L for cement concrete 1:4:8 type D-2, using 40 mm graded crushed stone aggregate as in foundation complete all as specified and directed.
S&F 200mm bore salt glazed stone ware drain pipes laid in trenches and jointed as specfied complete all as specfied and directed.
M&L for concrete bed in cement concrete 1:3:6 type C-2 to drain pipes of 200 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specfied and directed.
M&L for Providing precast cement concrete drain alongwith drain cover factory made type B-0, 1:2:4 (using 12.5 mm graded crushed stone aggregate) for swimming pool of cross sectional area size 0.20x0.20 Sqm complete all as specified and directed
Sch 'A' Part-I E/M Part:- Taking down carefully aluminum/copper point wiring (light fan socket or power) complete with fitting such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCB'S, Main switch from control board and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified keeping aside regulators/ light fitting/ MCBs serviceable/ unserviceable items for reuse with in the same bldg or deposited to MES store yard
M&L for Modular point wiring for one light/one fan controlled by one switch with 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable with and including PVC concealed conduit ISI marked heavy duty for one light fan/bell point controlled by one switch including Modular cover plate and modular metallic flush boxes of suitable way modular boxes and cover plates including PVC green insulated unsheathed 1.5 sqmm multistrand copper conductor FRLS-H cable as continous earthwire and connecting to earth duly, complete all as specified and directed. Make of conduit : Plaza, Anchor, Kamplast Make of wires : Anchor, Havells, Plaza, Finolex, KEI, RR Kabel Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green) (c) Metallic flush box should of same make of modular switch socket.
All as p[er srl item No. 79 here-in-before but One 5 Amps socket point on same board with other switches
All as p[er srl item No. 79 here-in-before but One 5 Amps switch socket outlet point on an independent board.
S&F Modular switch 1 way 6 A, 1 module complete all as specified and directed.
S&F Modular Socket 6A/ 2/3 pin combined 2 module complete all as specified and directed.
S&F of Modular Fan regulator 6A 1 module , complete all as specified and directed.
S&F ceiling rose 65 x 50mm three terminals complete all as specified and directed.
S&F in replacement energy saving decorative LED box type 20 W, 6500K, cool white, Lumen efficiency 110 lumen/watt, light fitting PVC housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired and making connections with twisted flexible copper cable of suitable size from ceilling rose/PVC connector to light fittings complete all as spd and directed by Engr -in -charge.
S&F LED Flood Light cool white with metal body with black housing colour , poly carbonate optical cover with silicon gaskets for IP-66 protection, IK07 -mech Protection , rated Power consumption = 120 W & luminaire lumen >=13200 lm , luminous efficacy 120 lm/watt in built electronic driver prewired upto terminal block with driver efficiency > 85% power factor > 0.95, suitable for external pole upto 35mm, LED Make:- Nichia/ Cree/Osram, CRI>70, ambient temperature range -10-45 degree celius , THD<10%, colour temperature 6500K, surge protection in CM- 10 KV, 50000 burning hours as per LM 70 criteria, multistage constant current-constant voltage operated driver with range 120-270V AC and safety extra low voltage safe level < 60V DC as per IEC Standard.
S&F façade light two direction up and down 12W,IP65,4kv Built in Surge Protection 230V AC,50 HZ with THD <0.15 with luminaire efficacy 70lm/W.
S&F surface light with motion sensor with WW/NW/CW, round/square in shape, with dimlight surface, of 15 Watt with 360 degree motion sensing within a radius of 4.5 meter with advance motion sensing technology of the accessing the movement for activating the light when needed complete with hassel free operations with 100 lumens per watt round in shape, 145mm in diameter, Height 40mm, wattage -15W, with nominal flux of 1500 lumen, 100 lumen/watt NW-4000K & CW with 6500K, warm white with 3000K including to mount synthetic diffuses complete making connections with twisted flexible copper cable of suitable size from ceilling rose/PVC connector to light fittings complete all as spd and directed by Engr -in -charge.
M&L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing propeller PVC type AC ventilating fans, Single phase, 230 volts 250 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with suitable size copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge.
S&F horizontal openwell Submersible pump having 4 inches dia. Inlet and outlet , 5 HP,1-phase with head range between 12-28 for filling up swimming pool water in shorter period.
M&L for submain wiring with two single core FRLSH insulated flexible copper conductor cable of size 2.5 sqmm and one single core PVC FRLSH insulated flexible copper conductor cable green colour of size 2.5 Sqmm as earth lead in & including concealed PVC conduit medium grade cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed by Engr-in- charge.
S&F sheet metal enclosure MCB distribution board. Single pole & neutral 230 Volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .
S&F in repair MCB single pole 230 Volts any rating from 6 to 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables.
S&F Decorative poles metallaic body (asthetically designed) of 03mtr height having two LED lights of 40W (warm white) on opposite sides each other,having base plate of size 340 x 380mm, aluminium casting complete including PCC (1:2:4) of size 450 x 450 x 600mm duly plastered, 04 x nut bolt grouted of 20mm x 250mm, 01xPVC bend of 32mm dia has to be grouted in PCC for cable in/out complete with all accessories internally prewired and including connecting up with flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and directed.
S&F in repair MCB SPN 240V, 50Hz, 10 KA, 'B' curve of rating 40 Amp all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (Earth pit not less than 2.25 metre deep below ground level ) with top edge of the plate not less than 1.5 meter below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as showin in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust, common salt all around Earth plate upto 150 mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40 mm thick RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregrate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including test on completion(Note :- The rate quoted include cost of min 7.5 meter earthing wire)
Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 2core
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil for laying of cable ,pole foundation,stay,laying of pipe etc complete all as specified and directed.
M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified
M&L for old size Brick covering with equal to length of brick as mechanical protection to cable with well burnt sub class 'B' bricks laid as directed.
Returning filling in, including spreading ,leveling ,watering and well ramming in layers not exc 25 cm complete all as specified.
Removing excavated soil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified.
M&L for GI tubing light grade 50 mm bore for cable protection laid in trenches in road crossing or fixed to wall / pole (Rates incl accessories such as bend, clamps, nuts bolts and washers req for fitting)
Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 27,742.00 and any other reduction if any from quoted amount.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
tender104.pdf
Tender Documents • 1.89 MB
BOQ_843232.xls
BOQ • 1.22 MB
Download all tender documents and submit your bid