RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Auditorium Chair ( 110 pieces ) Technical Specifications 1/5 * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) SEAT Type of seat tip up-seat which is spring free with a gravity tip-up movement * Seat rest assembly 12mm ±1mm thick flat plywood moulded with polyurethane foam and upholstered with 3-layer foam laminated fabric and injection moulded cover * Seat under structure MS black powder coated understructure with integrated auto tip- up mechanism which folds the seat when not in use * Fixing of understructure to ground By anchors with washer and nut * seat width ±10mm 450 * seat depth ±10mm 460mm * Seat thickness(including cushion)±10mm 110mm * PU foam moulded with density±2Kg/CuM 45Kg/CuM * Upholstery fabric Fire retardant treated fabric * Shade of Upholstery fabrics N.A * GENERIC Mode of Supply of auditorium chair Assembled Ready To Use * Type of chair Floor mounted * BACKREST Type of backrest Rocking backrest up to 100mm * Backrest assembly made up Moulded PU supported by hot pressed moulded ply of 15mm thickness * Backrest width ±10mm 450mm 450mm Backrest height ±10mm 700mm 700mm 2/5 Backrest thickness ±10mm 110 mm * PU foam moulded with density ±2mm 50Kg/Cum * Upholstery fabrics N.A * Shade of Upholstery fabric N.A * ARMREST Type of armrest Both sides * Armrest made up of Integral PU foam-50mm * Armrest cladding Made up of 9mm thick Wooden and upholstered with fabric * PU foam moulded with density ±2mm for Armrest 40Kg/CuM * Armrest width ±10mm 50mm * MISC Side panel/Aisle panel (chair rests on the ground on two side panels frames) Made up of 2.5mm thick CR steel.each side panel is clad with two fabric upholstered particle board of 9mm thick * Leg frame assembly fabricated From MS tube 60mmX40mmX2mm thick welded with grouting member * Writing pad Without * Type of writing pad N.A * Number of bottom plates 2 Nos foundation plate of 120mm(W)X170mm( L)X5mm(T) HR steel * Rocking Spring N.A * GENERAL DIMENSION Arms to arms inner width ±10mm 480mm 480mm Seat to floor height ±10mm 450 * Backrest to floor height ±10mm 1000 1000.0 Arms to floor height 630 mm * COLOUR & FINISH All steel components should be Epoxy polyester powder coated(DFT 40-60 microns) * WARRANTY Warrantee period in number of years 2-YEAR 2-YEAR CERTIFICATION Test reports to be furnished to buyer on YES * 3/5 demand OEM of offered product is ISO 9001:2015 certified YES * OEM of offered product is ISO 14001:2015 certified YES * OEM of offered product is ISO 18001:2007 certified YES * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents