8564/GWL/E8 PROVN OF ONE SEPARATE SHED 25X20 FT AND OTHER SANCTIONED WORKS IN THE AREA OF AGE B/R-I UNDER GE GWALIOR

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out etc as in any type of soil complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified and as directed.

M & L cement concrete in foundations, filling and mass concrete ect type D-2 1:4:8 (using 40mm graded stone aggregate) complete all as specified and as directed.

M&L for providing, cement concrete type C1 1:3:6 (using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span ect , cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided in roof kerbs or mud stops, rounded or chamfered on edges including all form mould etc complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

M&L for moorum/red bajri filling in floors or pavings laid in layers n.exc 15cm thick spread levelled and rammed including watering complete all as specified and as directed .

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement morart 1:6 complete all as specified and as directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and directed

M&L for brick work with sub class "B" bricks straight or curved on plan to any radius in half brick thick wall built in cement morart 1:4 complete all as specified and as directed.

S&F of framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe290 Grade E-165 complete all as specified and as directed.

S&F of steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and as directed.

S&F of galvanised mild steel wire clothe 0.48mm nominal dia or wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire complete all as specified and as directed.

M&L for Sheet glass ordinary quality and glazing with oil putty in square but nexc. 0.5 sqm in each pane 3 mm thick complete all as specified and as directed.

S&F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe 290,Gde E-165 complete all as specified and as directed.

M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc of Fe 290,Gde E-165 complete all as specified and as directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based double ribbed trapezoidal profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by the Engineer-in-Charge

S & F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified directed by the Engineer-in-Charge.

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts, flat and struts in fencing, wind tie etc including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L Reinforced Cement Concrete (Nominal Mix) Type B1 1:2:4 in foundations, including rafts, footings, foundation beams; plinth or lintel beams; bases for columns, etc.; basement slabs, slab supported on wall ect under-reamed piles and mass concrete complete all as specified and as directed.

M&L for use and waste formwork to sides of concrete foundation , footing, base of coulmn , raft, raft beam sides and soffits of foundation, slab supported on wall and plinth beam etc for rough finished surfaces of concrete complete all as specified and directed.

M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 over brick/concrete surfaces finished fair and even complete all as specified and as directed.

M&L for rendering 15mm thick on the ‘other than fair faces' side of lathing in cement mortar 1:6 over brick/concrete surfaces complete all as specified and as directed

M&L for preparing newly plastered surface of wall and applying two coats of cement base paint of approved shade/tint complete all as specified and as directed.

M&L for Preparing of newly surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying two coat of white wash complete all as specified and as directed by the Engineer-in-Charge .

M&L for for preparation and applying two coats of synthetic enamel paint over a priming coat on new steel surface exceeding 10cm width or girth complete all as specified and as directed by the Engineer-in-Charge .

M&L for for preparation and applying two coats of synthetic enamel paint over a priming coat on new steel surface n.exceeding 10cm width or girth complete all as specified and as directed.

M&L for 50 mm thick Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in floor/paving surface even and smooth complete all as specified and as directed.

S&F of Glass dividing strip of 38mm wide and 3mm thick inserteed in position complete all as specified and as directed by the Engineer-in-Charge

M&L for 75mm thick cement concrete type C2 1:3:6 using 40mm graded stone aggregate as in plinth protection/Path/paving ect surface even and smooth complete all as specified and as directed.

Removing excavated material n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed

S&F stainless steel kitchen sink with drainage board made of stainless steel 1mm thick with plug, washer & waste coupling ect including bedding in cement mortar to during wall including fixing cantilever brackets & connection to pipe over all size 915x460mm bowl size 410x330x160mm complete all as specified and directed.

Supply only 32 mm dia flexible waste pipe of required size complete all as specifed and directed.

S&F Stainless steel plate rack for utensils of size 600x750 and standard quality min weight not less than 7.20 kg each all as specified and directed Make : Diamond/Prayag/Anjali/Parkar/Parryware/Equvalant of approved make (Min weight 7.20 kg)

S&F S S plate rack for utensils of size 750x750mm of standard quality complete all as specified and directed. Make : Diamond/Prayag/Anjali/Parkar/Parryware/Equvalant of approved make (Min weight 7.20 kg)

Cutting chases , pinning in , making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings etc and cutting chases for concealed water tubing etc and making good , cutting n exc 10 cm girth complete all as specified and directed

S&F 15mm GI tubing medium grade with all fittings & fixed to wall & ceiling or laid in form etc complete all as specified and directed.

S&F, 20 mm bore tubes medium grade galvanised with all fitting and fixed to walls and ceiling or laid in floor etc complete all as specified and directed

S&F 15mm dia of fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipr or for brass ferrule and fixed omplete all as specified and directed

M & L, for cement concrete in DPC, type B-0 1:2:4 (using 12.50 mm graded stone aggregate) complete all as specified and as directed.

Hard core of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complet as specified and directed..

M&L for 75 mm thick Cement Concrete PCC 1:4:8 type D2 (Using 40mm geaded stone aggregate) as in sub base complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar 1: 6 for laying floor finishes complete all as specified and directed

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in cement plaster 1:4 on the other side of lathing and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for brick work with sub class "B" bricks straight or curved on plan to any radius in half brick thick wall built in cement morart 1:4 complete all as specified and as directed.

M&L for 25 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

M&L for machine pressed precast concrete Inter locking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness in grey cement laid dry over sand cushion complete all as specified and directed

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

M&L Reinforced Cement Concrete (Nominal Mix) type B0 1:2:4 (12.5mm graded)Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for formwork fair finished flat surface to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L for 10 mm thick screed bed or cement mortar 1: 4 on concrete surfaces mixed with WPC, surface finished even and smooth W/O using extra cement complete all as specified and as directed. (WPC shall be measured & paid seperately).

Supply only integral water proofing compound. (ISI marked)

M & L for 05 mm thick rendering in CM 1:3 on ceiling surfaces , finished fair and even complete all as specified and as directed

M&L for preparation of newly plastered sufaces of walls with putty and pereparation of surface for further treatment and M&L for two coats of distemper oil emlusion white or tinted over a two coat of wall care putty on walls complete all as specified and dircted.

M&L for applying two coats of exterior emulsion paint new plaster surfaces,white or tinted on wall and including one coats white care putty to achive even and fair surfaces complete all as specified and directed .

M & L for prepartion of new steel surfaces ,exc. 10 cm width or girth and applying two coat synthetic enamel paint over one coat of red oxide primewr etc complete all as specified.

S&F rotational moulded polyethylene water storage tank capacity 1000ltr (cylindrical vertical with closed top ) double layer construction , ISI marked , hoisted and fixed in position including dismantling of old tank and removing to from site complete all as specified and directed.

S&F, 110mm bore, PVC (SWR) bends any radius complete all as specified and directed complete all as specified and directed.

S&F, 110mm bore, PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed.

S&F, 75 mm bore, PVC (SWR) bends any radius complete all as specified and directed complete all as specified and directed.

S&F, 75 mm bore, PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. complete all as specified and directed.

S&F, 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors ect complete all as specified and directed.

S& F PVC ( SWR ) floor trap plain with grating including jointng with solvent cement and fixed in repair 75 mm dia outlet complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L Providing precast cement concrete Type C1 (1:3:6 20 mm graded aggregate) in win- dow or door cills, ntels,bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, Watherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed

S&F in repairs 65 to 100 mm size brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.

S&F aluminum handles cast type, anodized of 100 mm size complete all as specified and directed.

S&F butt hinges 100mm long medium weight, cold rolled mild steel complete all as specified and directed.

S&F 100 mm long aluminium anodised , barrel tower bolt of extruded section and fixed complete all as specified and directed.

S & F 15mm dia stop valve CP fancy type screwed to unioun or GI pipe etc complete all as specified and as directed.

S&F vitreous china wash down water closet pan ( pedestal pattern ) EWC white shade with required fixing arrangements and plastic water closet seat black closed pattern with flat bottom and cover complete all as specified and as directed.

S & F PVC Low level flushing cistren 10 Ltr capacety including all itting such as flush pipe brackets complete all as specified and directed.

S&F wash hand basin vitreous china (flat back) any size including cutting for and pinning in ends of brackets complete size (550 x 400mm ) complete all as specified and directed.

Supply only Pillar taps cast copper alloy with capstan head Chromium Plated screwed down, high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nut screwed for iron pipe and fixed complete all as specified and as directed

S&F PVC Connections 15mm size and 450mm lengthcomplete all as specified and directed.

M&L for towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) all as specified and directed.

M&L for soap dish, any type, fixed to plugs with chromium plated brass screws all as specified and directed.

M&L for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) all as specified and directed.

Supply only brass chromium plated waste fitting for wash basins and sinks with inlet and outlet, screwed for pipe or connections and with one cleaning cap, 32mm bore all as specified and directed.

M&L for Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed.

S&F flushing jet spray for pedestal pattern EWC including 1 mtr long flexible pipe and brass chromium plated nuts etc complete all as spd and directed

M&L concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid in trenches for 150 mm SWG pipe.

S&F Rotational moulded polyethlene water storage tanks of capacity 500 Ltrs (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

S&F 20mm bore ball /float vavle high pressure of PTMT with epoxy coated aluminium rod and high density platic ball screwed for iron pipe and fixed all as spd and directed.

S&F in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed complete all as specified and directed.

S&F 200 mm dia flue pipes of mild steel sheet, black, in suitable lengths as approved by the E.I.C. fixed to walls complete all as specified and as directed.

S&F 250 mm dia Cowls (with 3 stays), riveted to and including 15cm length of flue pipes complete all as specified and as directed.

M&L for Plain Cement concrete (1:3: 6) type C2 in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

Round bars 10mm dia and over cut to length, bent to shape required cranking bending and binding wire (annealed) not less than 0.9mm dia complete as directed.

Fixing only galvanised chain link fencing of 100x100mm mesh & 4mm dia GI wire including line wire standards rails straining bolts etc including provision of binding wire complete all as specified and as directed.

Supply only MS galvanised chain link fencing of size as specified under item No.97 above complete all as specified and as directed.

Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm specing and staining and fixing to any type of standard rails including securing or lying at crossing with and provn of MS galvanised pins etc as directed.

Point wiring with PVC insulated 1.5 sqmm multi stranded FRLS copper conductor cable 1100 volts grade drawn into and including concealed rigid nonmetallic PVC conduit medium grade not less than 19mm (ISI marked) with all conduit fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes (duly painted with two coats of anti corrosive paint out side and two coats of aluminium paint inside) with 2.8 mm thick HYLAM brand laminated white bakelite sheet cover for mounting switches, sockets, fan regulators, etc and 1.5 sqmm multi strand copper conductor cable as continuous earthwire complete for the following :- (a) One light point controlled by one switch.

All as per item No. 100 above but One fan point controlled by one switch.

All as per item No. 100 above but One 3 pin socket outlet 5 Amps controlled with one switch on the same board.

All as per item No. 100 above but One 3 pin socket outlet 5 Amp controlled by one switch on independent board.

All as per item No 100 but with 2.5 sqmm multistrand FRLS copper conductor cable for one 15 Amp socket outlet controlled by one switch on independent board and 1.5 sqmm PVC insulated multi strand copper conductor cable as continous earth wire complete. Note :- make of conduit for ser No 1 to 2 :- Anchor/Modi/Presffit. Make of wire :- Finolex, Plaza, Polycab.

S&F Switch piano flush button single pole one way 5 Amp complete. Make : Havells/Cona/Legrand.

S&F Switch socket outlet, 5 Pin, 6 Amp 2 in 1, flush type, universal complete. Make : Havells/Cona/Legrand.

S&F Switch socket combination , 5 Pin, 6 Amp 2 in 1, flush type, universal complete.

S&F Switch socket combination , 6 Pin, 5/ 16 Amp 5 in 1, flush type, universal complete. Make : Havells/Cona/Legrand.

S&F Ceiling rose 3 terminal/pvc/polycarbonate, isolated body. Make : Havells/Cona/Legrand.

S&F Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings incl LED Bulb 09W/10W complete. Make of Lamp Holder :- Leader/Legrand/Havells. Make of LED Bulb :- Philips, Wipro, Havells.

S& F of 9/10 W LED 2Ft LED batten including LED tube rod having LED Batten suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with minimum 2.5 KV surge protection. Make :- Wipro, Philips.& Havells.

S&F Ultra bright LED Tubelight fittings complete of 22 w incluing req length of 1.5 Sqmm PVC multistranded copper conductor ro electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. Make of LED fittings :- Philips, Wipro, Havells.

S & F security light fittings better optics for uniform distribution IP 65 protection LED of 30 watt, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 6 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed. Make of LED fittings :- Philips, Wipro, Havells.

S&F PVC type Wall mounted Ventilating Fans 150 mm sweep BEE 5 star rating energy saving including cutting of wall all as specified and directed by Engr - in - Charge. Make :- Havells/Usha/Bajaj.

Supply & fixing water heater storage type metallic outer body and stainless steel inner container, 25 Ltrs capacity, electric suitable for single phase, 50 Hz, AC Supply, 4 star rating, including all necessary fittings and fixture with minimum 1M of three core 2.5 sqmm twisted copper conductor cable PVC sheated, three pin plug top complete with necessary fittings and fixtures all as specified and directed. Make :- Usha, Havells, Crompton.

S&F, in repair, MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F MCB single pole 240 volts, 6 to 32 Amps 'B' Series complete. Make :- Schneider, Havells, Legrand.

S&F MCB single pole and neutral 240 volts, 25 to 40 Amps complete. Make :- Schneider, Havells, Legrand.

S&F sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket with and including one single pole MCB 20. Amps, 240 volts,10 KA complete all as specified and directed. Make :- Legrand/Siemens/Scheider.

M&L for sub main wiring with 2 runx 6 Sqmm + 4 sqmm earth wire single core PVC insulated cable unseathed multistranded copper conductor LT 1100 volts grade FRLS cable IS-694 (ISI marked with valid CML No ) drawn in & icluding PVC conduit of dia not less than 25mm in concealed (ISI marked with valide CML No ) including its all fittings/accessoreis with one run single core copper cable 4 sqmm multistranded conductor (ISI marked with valide CML No) colour code as a earth continuity and connecting upto DB with suitable lugs all as specifed and directed. Make of Conduit & wire : Anchor, Finolex, Polycab.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe etc complete all as specified and directed.

Supplying & fixing twin core PVC insulated with aluminium conductor single strained cable 1100 volts grade of size 16 Sqmm.

M & L for house service bracket (hook type) complete with 3 mtr long GI pipe 40 mm dia GI pipe Med grade two Nos 90 degree bends MS hook and stay or guy complete incl taking down old unsv one all as specified and directed.

M/s Shree Ram and Sons

M/s Shri Diwakar Singh

M.S. ENGINEERS

Babatia super works

M/s raj construction