SPECIAL REPAIR TO BUILDING P32 AND PROVN OF SEWAGE LINE INCLUDING SEPTIC TANK AND ALLIED WORKS UNDER AGE BR II OF GE (WEST) FEROZEPUR CANTT

Amount

Demolition of un-reinforced cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement morter beddind (but not backing removing seviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of brick tiles single layer laid on roof jointed & pointed in cement mortar complete all as specified and directed.

Demolition/taking out mud from the roofs, any thickness, including plastering and leaping etc including removing rubbish from the site complete all as specified and directed.

M&L rendering 10 mm thick in cement plaster 1:4 mixed with integral water proofing compound as per manufacturers' instructions over the roof padding as in roof treatment complete all as specified and directed.

M&L water proofing treatment to roof surface including parapet wall comprising with the following course of treatment/ specifications form bottom to top:- (a) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm over a coat of bitumen primer @ 0.30 ltr per sqm including preparation of roof surfaces complete all as specified and as directed. (b) One layer of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. Polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet walls and shall be finished by a membrane flashing. Notes: (i) Laying of APP based membranes shall be done by torch on method or as per manufacturer's instructions. (ii) A minimum overlap shall be 75mm length wise and 100 mm width wise of polymeric membranes respectively and sealed all overlaps and joints as manufacturer's instructions.

M&L two coats of aluminium paint over APP membrane complete all as specified and directed.

M&L brick tiles 40mm thick laid on mud mortar (mud phuska) and joints grouted flush in cement mortar 1:3) mixed with 5% of crude oil by weight of cement and pointed flush as the work proceeds complete all as specified and directed.

All as per Srl Item No 08 here-in-before but using old brick tiles retieved from dismantling including cleaning and removal of mortar from tiles complete all as specified and directed.

M&L cement concrete 1:3:6, type C-1 (using 20 mm graded stone aggregate) as in fillings and mass concrete, filling backs of chowkats etc complete all as specified and directed.

M&L cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate ) as in roof padding, roof kerbs or mud stops, bed blocks,benching etc including necessary form work complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6, type C-2 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.

M&L plain cement concrete 1:2:4, type B-2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring, foundations, filling and mass concrete etc complete all as specified and directed.

M&L Non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover and including 15mm thick rendering in cement mortar (1:6) complete all as specified and directed.

M&L Non-skid ceramic tiles coloured 7 to 8 mm thick (square/ rectangular) primium quality area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and incl screed bedding 15mm thick in cm (1:6) complete all as specified and directed.

M&L Glazeded ceramic coloured (colour & shade as approved) tile 450mmX 300mm & 7mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white/ coloured cement with pigment to match the colour of tiles complete all as specified and directed.

Demolition of brick work/stone/boulder masonary built in cement mortor including all quoins, arches, pillars etc complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per Srl Item no 18 here-in-before but using old bricks retrieved from dismantling under ser item 17 here-in-before including cleaning and removal of mortar from old bricks etc ccomplete all as specified and directed.

Taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1: 6 on fair faces of brick /concrete surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1: 4 on other than fair faces of brick/concrete surfaces finished even and fair without using extra cement with using 200 ml of water proofing compound in 50 kg cement complete all as specified and directed.

Supply only liquid water proofing compound (LWPC) ISI marked complete all as specified.

M&L 5mm thick rendering in cement mortar 1: 3 on ceiling surfaces plastering and finished even & fair without using extra cement, complete all as specified and directed.

M&L applying two coats of OBD over a coat of primer over a coats of wall care putty (01 mm thick) including preparation of new plastered wall surfaces complete all as specified and directed.

M&L applying two coats of cement based paint over a coat of alkali based primer including preparation of newly plastered wall surfaces complete all as specified and directed.

M&L preparation of new plastered surfaces of ceiling & applying three coats of white washcomplete all as specified and directed.

M&L preparation of old plastered surface of wall and applying one coat of OBD over walls complete all as specified and directed.

M&L preparation of old plastered surface of wall and applying one coat of cement based paint over walls complete all as specified and directed.

M&L preparation of old plastered surfaces and applying one coat of white wash on ceiling surfaces complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and directed.

All as per Srl Item no 31 here-in-before but size exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified.

Taking down shutters of any description, exceeding 1.0 sqm but not exceeding 2 sqm each and after reparing refixing the same.

S&F Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs, hinges, lock plate, etc., size of frame 125mm x 60 mm including one shop coat of red oxide primer complete all as specified.

S&F Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 105mm x 60 mm including one shop coat of red oxide primer complete all as specified.

S&F 40mm thick, Flush shutters of solid core construction, with block board core, with lipping both faces covered with decorative laminated type-I of thickness 0.9mm.Colour and pattern shall be approved from Engr-in-Charge complete all as specified and directed.

S&F 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed.

S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019/08 sheet 1/3 to 3/3 complete all as specified and directed.

S&F Mild steel framed work of as in grills/guard bars shouldered with steel window/ ventilator frames incl red oxide primer on surfaces complete all as specified and directed.

S&F 4.8 mm thick Sheet glass, ordinary quality and glazing with oil putty in squarenot exceeding 0.5 sqm in each pane complete all as specified

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture not more than 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 4.0 mm thick Figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane fixed to aluminium ventilator complete all as specified and directed.

S&F in repairs 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC "C"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles & rails with suitable PVC sheet beading and jointed togeather with solvent cement complete all as specified and directed.

Demolition of ceiling boards of any description, and any thickness including cover fillets and frame work complete all as specified and directed.

M&L GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete , complete all as specified and directed.

M&L fancy designed 6 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceiling shall be measured and paid separately) fixed to GI frame work in ceiling and all other similar works complete all as specified and directed.

M&L Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a shop coat of primer complete all as specified.

M&L Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a shop coat of red oxide priming complete all as specified and directed.

M&L one coat of synthetic enamel paint including preparation of old painted wood or wood bases surface of any description over 10 cm.width or girth complete all as specified and directed.

M&L one coat of synthetic enamel paint, including preparation of old painted steel or steel bases surface of any description over 10 cm width or girth complete all as specified and directed.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel, and fixed with screws complete all as specified and directed.

S&F aluminium anodised 150mm long barrel tower bolts of extruded section and fixed with screws complete all as specified and directed.

S&F extruded aluminium alloy handles, 150mm size fabricated type complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.

S&F 300 mm mild steel ordinary rat tail spring including roller and roller plate complete all as specified.

M&L cutting chases, pinning in. making good to facings where required for brick wall and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth complete all as specified and as directed.

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and as directed.

Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified and as directed.

M&L GI steel water tubing, 15mm bore medium grade galvanized with all fittings and fixed to walls and celling or laid in floor, complete all as specified and as directed.

S&F 15 mm bore Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 laid in trenches complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 20 mm bore Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 laid in trenches complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F in repair stop valves, fancy type, CP with long shank and cup ( concealed type ), screwed both ends for 15mm bore of iron pipe or for union and fixed acomplete all as specified and as directed.

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S&F in repair gun metal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair stop valves/angle cock, fancy type cast copper alloy, screwed down, high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fixed complete all as specified and as directed.

S&F in repair Vitreous china wash basin, white/ coloured, flat back, size 550mmx400mm including PTMT waste fittings & pipe, 32mm bore size and angle iron brackets & CP Pillar CP Pillar Brass mixer for mixing hot & cold water screwed down for iron pipe and fixed and making good disturbed surfaces to match with the existing complete all as specified and as directed.

S&F Low density polyethylene (LDPE) pipes 32mm bore of pressure rating 6 kgf/sqcm complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified.

S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe incl dismantling existing water storage tank complete all as specified in SSR Part-I complete all as specified and as directed.

S&F in repair Vitreous china squatting pan, Orissa pattern, size 580mmx440mm white/ coloured with integral foot rests including trap set in and including concrete and connection to trap, and to flushing pipe, anti-syphonage pipe, etc complete all as specified and as directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern including P or S trap), white/ coloured including seat & cover, flush pipe,health faucet connection to drain and to flushing pipe, anti-syphonage pipe, etc complete all as specified and as directed.

S & F for vitreous China urinals, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)32 mm waste coupling, urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed.

S&F in repair PVC 10 ltr. capacity valveless syphonic action type, flushing cictern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc complete all as specified and as directed.

S&F in repair 125 mm chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and as directed.

S&F in repairs CP Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete with complete all as specified and as directed.

S&F in repairs 15 mm CP Wall mixture (wall mounted) with bend pipe for overhead showers/ wash basin/sink etc. connecting legs and wall flanges including complete all as specified and as directed.

S&F in repair Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed to walls with steel screws and wooden/rawl plugs as in repairs complete all as specified and as directed.

S&F in repair Stainless steel soap dish (not less than 1mm thick) of type as directed,fixed to walls with chromium plated brass screws with wooden/rawl plugs complete all as specified and as directed.

Dismantling upto 100mm of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from wall/trenches, if required complete all as specified and as directed.

Taking down eaves gutters and rain water pipes (any size or pattern),including all fittings heads shoes bends swan-necks etc complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and as directed.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F 75mm dia Junction single (Single or double T) equal or unequal complete all as specified and as directed.

S&F 110mm dia Junction single (Single or double T) equal or unequal complete all as specified and as directed.

M&L PVC (SWR) floor trap 75 mm, plain with PVC grating including jointing with solvent cement etc., complete all as specified and as directed.

M&L PVC (SWR) floor trap 125/110 mm, plain with PVC grating including jointing with solvent cement etc.,complete all as specified and as directed.

S&F Mild steel curtain rod powder coated with fixing side fancy type brackets,end cups,rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified and as directed.

M&L providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. Makes:- :- SITCO, POOJA CONCRETE, MOHINDRA INDUSTRIES, KB SPUN, SARAL IMPEX, RANA TILES CO, SHINO TILES, RN TILES & PAVERS, SWASTIK ALW

M&L providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

S&F rolled sections in posts / struts/ fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) incl all necessary drilling/ bolting/riveting, etc. & similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates

S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter and similar works fixed with self tapping screws complete all as specified and as directed.

M&L Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including notching/ nosing/ easing including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Supply only glass dividing strips, 3 mm thick, 38 mm width, inserted in position, conform to design complete all as specified and directed.

Surface dressing not exceeding 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating over areas, not exceeding 1.5 m deep and getting out in soft /loose soil complete all as specified

Excavating over areas, exceeding 1.5 m deep but not exceeding 3.0 m deep and getting out in soft /loose soil complete all as specified and as directed.

Excavating over areas, exceeding 3.0 m deep but not exceeding 4.50 m deep and getting out in soft /loose soil complete all as specified and as directed.

Excavating over areas, exceeding 4.50 m deep but not exceeding 6.0 m deep and getting out in soft /loose soil complete all as specified and as directed.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m deep and getting out for foundation of cess pits, soakwells etc in soft / loose soil complete all as specified and as directed.

Excavating in trenches not exceeding 1.5m wide and exceeding 1.50 m but not exceeding 3.0m deep and getting out for foundation of cess pits, soakwells etc in Soft / loose soil complete all as specified and as directed.

M&L Plain cement concrete 1:4:8 type D2 ( using 40mm graded stone aggregate ) as in foundations complete all as specified and as directed.

M&L brick work with sub class ‘B’ bricks in one brick thick honey comb walling, built in built in cement mortar 1:4 complete all as specified and as directed.

M&L coping 1:3:6 type C-1( using 20mm graded stone aggregate ) , kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

S&F Mild steel work as in rungs, handles and similar articles conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Use and waste of formwork to soffits of floor or roof beams, beam haunching ,grider, bressumber, lintels,cantilever ,sleves including supports ,over hang etc also splay between floor and beams to rough finish surface of concrete flat complete all as specified and as directed.

M&L RCC (Nominal mix) 1:2:4 , type B-1, (using 20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span ccomplete all as specified and as directed.

M&L providing RCC (Nominal mix) 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in wall or baffle / cantilever walls in septic tank and fixed in cement mortar including form work etc complete all as specified and as directed.

M&L Rendering 15mm thick in cement and sand mortar 1:4 mixed with water proofing compound @ 3% by weight of cement contents on fair faces of brick or concrete surfaces, finished even and fairh without using extra cement complete all as specified and as directed.

Supply only water proofing compound (WPC) complete all as specified and as directed.

M&L Loose filling with aggregates of gauge 40 to 80 mm in soakage pits, soakage wells complete all as specified and as directed.

M&L broken brick bats hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.cified

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) for rough finished flat surfaces complete all as specified and as directed.

M&L RCC (Nominal Mix) 1:2:4, type B1 (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like or cover slabs of soak well etc complete all as specified and as directed.

M&L providing TMT bars 8mm dia and over cut to length, bend to shape required incl cranking, bending spirally for hooping for column hooking ends and binding with and including MS wire (annealed) not less than 0.90mm complete all as specified and as directed.

Returning, filling in soils, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.

Removing excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L 40 mm thick, PCC 1:2:4, type B-1 (using 20 mm graded aggregate) as in flooring of septic tank ccomplete all as specified and as directed.

M&L 110 mm dia PVC (SWR) cowl for vent pipe complete all as specified and as directed.

M&L Concrete bed to drain pipes of 150mm bore in PCC 1:3:6, type C2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

M&L Concrete bed to drain pipes of 200mm bore in PCC 1:3:6, type C2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid and tested.

M&L reinforced concrete pipes 150mm dia, class NP2, laid and jointed complete with collars complete all as specified and as directed.

M&L reinforced concrete pipes 200mm dia, class NP2, laid and jointed complete with collars ccomplete all as specified and as directed.

M&L Precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slabs set in cement mortar 1:6 complete all as specified and as directed.

S&F 100 mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls or on septic tank/ soak well etccomplete all as specified and as directed.

S&F 100 mm dia Cast iron cowls complete all as specified and as directed.

M&L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 100 - 300mm dia pipe complete all as specified and as directed.

Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLSH cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including rigid non-metallic PVC conealed conduit, with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.

(b) One socket outlet on the same board controlled by one single pole one way switch

(c) One 5 amps socket outlet independent controlled by one single pole 5 Amp switch.

All as per Srl Item No 143 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

S&F Switch piano flush type single pole one way 5/6 Amp complete all as specified and as directed.

S&F Switch piano flush type 15 amps, single pole one way duly ISI marked complete all as specified and as directed.

S&F Socket outlet 2 in one , 5/6 Amps flush type ISI marked complete all as specified and as directed.

S&F Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type ISI marked complete all as specified and as directed.

S&F bell push flush type 5 Amps duly ISI marked complete all as specified and as directed.

S&F ceiling rose, PVC/Polycarbonate,isolated three terminals complete all as specified and as directed.

S&F Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb complete all as specified and as directed.

S&F in repair stepped type electronic fan regulater flush type on the existing phenolic laminated sheet etc. as reqd complete all as specifed and directed

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed.

S&F LED tube light fitting 1 X 18 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Makes:- Cat Part No LHEXBLP7UN1W018 of Havells make or techno-commercially equivalent in approved makes.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 Volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and as directed.

S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified.

S&F MCCB 100 Amps, 415 volts, 16 KA, 4 Pole complete all as specified and as directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

S&F SPN 32 AMP amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

S&F Sheet Metal Enclosures with Socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amp complete all as specified and directed.

S&F in repair sub main wiring of 4 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 4.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia all as specified and directed. Note: Two run of single core 4 sqmm cable and one run single core 4.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length).

S&F sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia complete all as specified and as directed. Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run)

M&L earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm & 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) complete all as specified and as directed.

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 core complete all as specified and as directed.

M&L sand filling floors, foundation or cable protection including spreading levelling in layer not exceeding 25cm thick complete all as specified and as directed.

M&L brick common brunt clay building bricks, sub class 'B' designation 75 laid dry width wise across the line of cable in trenches for protection of under ground cable complete all as specified and as directed.

M&L Mild steel galvanised iron pipe light grade (ISI marked) 40mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e MS clamps nuts & bolts etc as required complete all as specified and as directed.

M/s Kissan Engineering Works (BID ID -3516814)