15TH FINANCE COMMISSION TIED GRANT 2022-2023 II nd ALLOTMENT

Amount

Dismantling and Clearing away from this site for exisiting damaged condition of work for including cost for all labour charges etc., Complete as per standard Specification. 1.Indian type water closet :

2. R.C.C. Work ;

3.Floor finish & dadooing wall in cement mortar with Mosaic tiles (S.O.R -W-0042PAGE NO;22)

4.Plain cement concrete (SOR; SL.NO;28/37G,PAGE NO;22)

5.Cement Plastering work(SOR; SL.NO;74/320,PAGE NO;25)

Earth work excavating and deposting on bank with initial lead of 10m& intial lift of 2m in hard stiff clay, stiff black cotton, hard red earth shales ,murram, gravel, stoney earth mixed with small size boulders etc completed as per std specification.

Cement concrete of mix 1:4:8 (One cement four sand eight aggregates) using 40mm guage hard broken including cost conveyance of all materials to site and labour charges, transporting and placing in position including shoring, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification.

Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size 83/4" x 41/4" x 23/4" from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Steel centering for side and sifits including supports and strutting upto 1m height for plain surface such as RCC slab with all cross bracings using mild steel sheet of size 90cmx60cmx10 gauge stiffened with welded miled steel angles of size 25x25x6mm for laid over silver oak for coundary wood joints of size 10x6.5 cm spaced at about 90cm centre to centre and supported by casurials props of 10cm to 13 cm dia spaced at about 75cm centre to centre and suppor etc completed as per std specification.

Supplying fabricating and placing in position of steel rods using TMT Steel including cost of binding wire, cost of labour charges for fabrication and placing in position etc. Complete. Complying with std. specifications.

Supplying and fixing in Position of indian type water closet with all set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete.

B) Supplying and fixing in position colour glazed EUROPEAN WATER CLOSET with 'P' or 'S' trap and double flapped seat cover, 12.50 litres capacity P.V.C. low level FLUSHING TANK including all internal fittings fixed on C.I. brackets, 12mm PVC or brass nipple, chromium plated brown headed stopcock, 12mm nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls and floors, including dismantling masonry and redoing the same to the original condition.

Vibrated Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part of sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry for Reinforced Concrete Works including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete

Paving the floor with Vertified tiles of approved make and quality and clour of size 300x300x10mm in cement mortor 1:3, 20mm thick and pointing with white cement including finishing jointing and polishing with glossy finish etc complete as per std specification

Weathering Course with broken brick jelly 20mm size pure slacked lime over R.C.C. roof slab the preparation of 32:12.5 for required depth and slope etc. complete.

Finishing the top of roof with one course of machine pressed tiles 23 C.m x 23 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight of Crude Oil and pointing with Cement Mortor 1:3 mix Cost of all materials and labour charges and brick jelly concrete etc., complete as per standard specifications.

Providing and laying of 83mm thick high strength type conforming is 15658-2006 of rubberized interlocking paver block in required sizes of minimum compressive strength of 40 N/mm2 in uniform shape of approved make to be laid in flurrying bone pattern with approved non sticking surface in the top and the rate including leveling the base preparation of sub base with stone dust cushion 100mm thick, laying out the pavement cut the pieces to fit the edge, vibrating the pavers, sweeping transporting, loading unloading and laying of paver block as per standard specification.

Supplying and fixing M.S.grill to doors, special windows and ventilators etc as directed by the departmental officers inclusive of cost of MS grill including one of cost red oxide and fixing in position etc., complete (as per the schedule of rate) SL.NO.182 Q3

Painting the new iron work in all floor two coat of best synthetic enamel paint of approved colour and brand over one coat of primer including scrapping and preparation of surface, cost of breshes and neat finishing complying with stadard specifications.

Special Ceiling Plastering in cement motor 1:3 mix (one cement, three sand) 10 mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete.

Daddoing with glazed titles of size 300x200x6mm of approved make and quality and clour cement mortor 1:2 10mm thick and pointing with white cement including finishing jointing and polishing with glossy finish etc complete as per std specification.

Supply and Delivery of PVC Pipes GI Pipes HDPE Hose and Specials etc complete. 2.50 Sq mm Flate vertified cable

20 mm dia wiring pipe

32 mm HDPE Hose coller

32 mm GI Elbow

32 mm dia GI Pipe " B " Class

32mm dia GI Union

32 MM GM Gate valve

32 mm dia MTA

32 mm dia bore well M.S Clamp

180 mm dia bore well M.S Clamp

1000 Lts capacity HDPE tank

32 mm dia Tank Nipple

32 mm dia UPVC TEE

32 mm dia UPVC Pipe

32 mm dia UPVC Ball valve

32 mm dia UPVC Elbow

32 mm dia Hex Nipple

32 x 20 mm dia UPVC Thereded Elbow

20 mm dia water not Tap

W/C 110 mm dia PVC 4 Kg/m² pipe

110 mm dia PVC Elbow

110 mm dia PVC TEE

Wash basin (550x400 mm) with pedasatal

Mirror

Incinerators for Ladies bathroom (for school works)

Man Hole precost slab 750 x 750 mm

Charges for conducting Geophysical survey to lcate favorable point for drilling borewell point including cost of transformation of machinery and labour charges etc. complete complying with standard specification. (Approved local rate)

Drilling 150 mm” dia deep vertical bore well in hard rock area in any Required depth as decided by the departmental officer including inserting the casing pipe etc complete as per standard specifications

Supply and delivery of 180mm PVC casing pipe (CM) including cost and conveyance of all materials and all labour charges etc complete as per standard specification.

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable heavy gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion wiith suitable colour SD:45

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains SD:65

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V gradein suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mountingswitch box on wall with 6A one way module switch with module front plate with painting of Suitable colourfor Open PVC Light point / fan point (for electronic regulator) ( 6 points / Coil) Lower End SD :308

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box for 15A 3 pinnon inter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point SD:39

Supply of single phase Sub mersible motor with Pump set as per ISI 8034 with Panel board of 20 lpm X 125 M of approved quality including cost and conveyance of all materials and all labour charges and other incidental charges to site etc., complete as per standard specification.

Laboar charges for the erection of submersible pumpset in Borewell including fixing jointing submersible cable with proper clamps up to starter to required depth ande also fixing of riser pipes to the recquired depth valves erection clamps,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter,Ammeter,Three pilot (indicating) lamps capacitor single phasing preventor,Water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days

Towards labour charges for fixing of PVC ,GI pipe and (CM) including cost and conveyance of all materials and all labour charges etc complete as per standard specification. 110 mm dia PVC pipe:

32 mm dia UPVC pipe:

supply and fixing of Eectrical material Woodern Board

32 Amp fuse carier

9 W CFL BULB

1x13 CFL Street light higher end

Painting the walls two coats over one coat of priming with best Ready mix plastic Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by departmental officers (S.l.No.359-A)

BABUNATHAN AND CO