SPECIAL REPAIRS TO ROADS AT VARIOUS PLACES OF ASC CENTRE

Amount

M&L for repairs to pot holes any depth not exc 1.00 sqm each in area including sweeping from dust and mud or water, scoring sunken surfaces in roads etc cutting around edges to at least 25mm in depth but making good by applying tack coat & 5kg per 10 Sqm (using paving bitumen), putting in premixed bituminous macadam, well rammed and sealed with binder 9.8kg per 10 Sqm, blinded with 0.09cum of stone chippings, 6.3mm size and well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30mm complete all as directed.

M&L for applying tack coat with bitumen emulsion (RS-1 Grade) confirming to IS 8887 @ 3kg per 10Sqm using emulsion pressure distributor on the prepared bituminous / granular surface cleaned with mechanical broom and as per clause 503 complete all as directed by Engr-in-charge.

M & L for labour for premix bituminous macadam with minimum 40-60 TPH bath HMP using crushed aggregates of specified grading, premixed with VG-30 bituminous binder @ 4% by weight of total mix and cement as a filler, transporting the hot mix to work site, laying with a hydrostatic paver finished to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tindem roller to achieve the dezire compaction as per MORTH specification clause no 505 complete in all respects, (Avg thickness shall not exe 75mm deep) etc complete all as directed.

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as directed.

M&L for applying tack coat with bitumen emulsion (RS-1 Grade) confirming to IS 8887 @ 3kg per 10Sqm using emulsion pressure distributor on the prepared bituminous / granular surface cleaned with mechanical broom and as per clause 503 complete all as directed by Engr-in-charge.

M&L Bituminous premix semi dense asphaltic concrete, 30 mm consolidated thickness with 5.5% binder content (VG-30 Paving bitumen) by weight of total mix, mixed in hot mix plant, rolled with 8 to 10tonne power roller and compacted to required camber and gradient complete all as directed.

Preperation of new or previously treaterd surfaces to receive the thermoplastic paste and making of guide lines, dashed arrows, letters, etc. with reflective thermoplastic paste 2 to 2.5 mm thick using marking machine, white, golden, yellow or black colour as required using glass beads necessary for adhieving reflection on roads, pavements, and the like as per BS 6088 complete all as directed and specified all as per IRC 35-2015 complete all as directed by Engineer in Charge. Make :- Metro Road Sysytem/ Shivalik/ Asian Note:- 1. Unit rate quoeted by the contractor include for provision of red signals to keep off trafic from work. cleaning road surface and working during odd hours when trafic is light. 2. The line marking shall stand out boldly and solidly without showing any signs of scrach marks or suefaces underneath, if necessary the surface shall be remarked after removal of existing treatment untill the desired result is obtain.

S & F of solar road studs made of aluminium alloy (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (Shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as directed. Make: Dhuruv of Dark eye of equivalent of 3M/ Sun Eyez/ M/S texla plastic & Metal Pvt Ltd , M/S Auto Road Safety Pvt Ltd

S & F cat eye solar relective type of metal body alloy of size 100mmx100mmx20mm with PAMA striplens reflector of model No DA 972.0 fixed with and incl MS studs of suitable size as per manufactures instructions complete all as directed. Make : Cat part No art AME 1019 of M/S automat road safety Pvt Ltd or equivalent of dark eye/ Sun eyes/ M/S Texla plastic & metal Pvt Ltd.

Demolition of kerb stone of any description and in any position not other wise specifically provided for complete all as directed.

M&L factory made precast cement concrete kerb stone with plain fare face including chamfered, watering, throating etc set and jointed in cement morter 1:6 complete all as directed. Note : (i) Precast cement concrete kerb stone shall be type C-1, 1:3:6. Size of kerb stone as directed by Engineer-in-Charge. (ii) The quoted rate inclusive of necessary excavation, Returning filling in, removal and including packing and making good around kerb stone with PCC 1:3:6 type C1 (Using 20mm graded stone aggregate)

PATEL CONSTRUCTION

MANJUNATHA CONSTRUCTIONS

G VENKATESH