Renovation of A.N.M. Training School at Sadar Hospital Campus at Ranchi For the Year-2021-22

Amount

Dismantling R.C.C.work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Providing av. 63mm thick R.C.C.M-200 with nominal mix (1:1.5:3) in chajja with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including making drip course in concrete, screening, centering, shuttering and mixing cement concrete in mixer and placing in position, vibrating, striking, 6mm cement plaster (1:4) in ceiling and sides of chajja with sand of F.M. 1.5 curing (but excluding the cost of reinforcement) taxes, and royalty all complete as per building specification and direction of E/l.

Dismantling Tile work flooring and roofs laid cement mortar including stacking of riceable matarial and disposal of unserviceable material within 50 metres lead. In thickness of tiles above 25mm and up to 40mm

Dismantling Tile work flooring and roofs laid cement mortar including stacking of riceable matarial and disposal of unserviceable material within 50 metres lead. For thickness of tiles 10mm to 25mm(Bath k& toilet kwall tiles)

Providing 250mm. wide brick drain in cement mortar (1:6) with av. 250mm. clear depth and 250mm. apron including cost of earthwork involved with 75 mm. Cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l.

Providing chequred precast concrete tiles 22mm thick in footpath coutyard jamted with cement slurry mined with pigment to match to shade of tiles including rubbing and cleaning etc complete 20mm thick bed of cement mortar(1:4)medium shed using 50% white cement &50% grey cement.

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement compacted volume).

Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.

Providing P.C.C.M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing 25 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compoundincluding taxes and royalty all complete as per building specification and direction of E/l.

Providing 12mm thick water proof cement plaster(1:3)with clean coaorse sand F.M 1.5with integrfal waater proofing compound liquid @125ml per bag cement inclujding screening,curing with all leads and lift of water ,scaffolding as peer building specification and direction of E/I. Brand-Sika,plastocrate plush,MYK proof WP 10,Fosrroc-conplastx4211C.Dr Fixit pidiipoof LW+or equivalent.

Providing 50 mm thick cement concrete flooring (1:2:4) with 20 mm to 6mm size graded stone chips finished with floating coat of neat cement in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty with all complete as per building specification and direction of E/l

Supplying of M.S .Angle 65x65x6mm approved make with royalty,carriage and all taxes all complete job as per specification and direction of E/I.

Labour for fabricating, erecting, hoisting and fixing in position structural steel work in R.S. joist, channel, Angle, Tee, flat, plate, latice member, built up compound section in column, girder, staircase or truss including cost of gusset plates, holding down bolts, anchor plates at all heights and depths, bolting, welding (machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing, building specification and direction of E/l.

Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750 mm deep, 600 x 450 internal dimension having 250 mm wall thickness in cement mortar ( 1:6 ) including 12 mm cement plaster ( 1:4 ) with punning on inside and cement plaster (1:6 ) with 600 x 475 mm G.I. cover with frame (Weight not less than 36 Kg.) in foundation and refilling all complete as per specification and direction of E/l.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes.

110mm diameter

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing, taxes and royalty all complete as per building specification and direciton of E/l.

With commercial grade white 15 x 15 cm tiles.

Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Providing 12mm thick cement plaster (1:3) with punning clean coarse sand of F.M. 1.5 including screening curing all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Suppling, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows, skylight, fanlights and celetial windows openings, including wedge over clamps all complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/l

Supplying , fitting and fixing 32 mm thick good quality well dressed well seasoned sal wood fully paneled shutters in doors and windows with 20 mm thick panels with one side plain and other side chamfered with oxidised iron fittings such as hinges, sliding door, bolts, tower bolts, handles or rings, hooks and eyes, cleats, sand blocks as per schedule taxes and royalty all complete as per building specification and direction of E/l.

Supplying , fitting and fixing 32 mm thick good quality , well dressed and well seasoned sal wood fully glazed shutters in windows with iron fittings such as hinges, sliding doors, bolts, tower bolts, handles or rings, sand blocks as per schedule and 3 mm thick plain glass fitted with sal wood beads, taxes all complete as per building specification and direction of E/l.

Supplying, fitting and fixing 150x20x6mm. L-type M.S. clamp properly fishtailed, including making holes and setting the same in 200x125x75mm cement concrete block (1:2:4 )with cost of all labour and materials and taxes as per building specification and direction of E/l.

Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/l.

Providing and fixing glass pasnes with putty and glazing clips in steel doors,windows,clerestory windows all complete with . 4.00mm thick glass panes.

Providing and fixing alumiunum work for door ,windows ,ventilators and partitions with extruded built up standard tubular sections, appropriate z sections and other sections of approved make conforming to IS:733 and IS:1285,fixed with rawl plugs and screws of with fixing clips, or with expansion hold fasteners including necessary filling upto gaps at junctions ,at top, bottom and sides with required PVC/neoprene felt etc .Aluminium sections shall be smooth, rust free, straight ,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling C.P. brass/stainless steel screws .all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing and paneling to be paid for separately)

Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directionsof engineer-in-charge . (Cost of aluminium snap beading shall bepaid in basic item):With float glass panes of 4.0 mm thickness

Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directionsof engineer-in-charge . (Cost of aluminium snap beading shall bepaid in basic item):With float glass panes of 5.50mm thickness

Providing and fixing 12 mm thick Pre-laminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

sheet to be inter locked at middle of the 1200x 600 mm panel to from gridof size 600x600 mm, resting on periphery walls /partitions on a Perimeterwall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mmthick (minimum) sheet with the help of rawl plugs at 450 mm centre tocentre with 25 mm long dry wall screws @ 230 mm interval and laying 15mm thick densified edges calicum silicate ceiling tiles of approved texture(Spintone / Cosmos/hexa) in the grid, including, cutting/ making openingfor services like diffusers, grills, light fittings, fixtures, smoke detectorsetc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods withgalvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mmcentre to centre along main ‘T’, bottom exposed with 24 mm of all Tsectionsshall be pre-painted with polyster baked paint, for all heights, asper specifications, drawings and as directed by engineer-in-charge Note :- Only calcium silicate false ceiling area will be measured from wallto wall. No deduction shall be made for exposed frames/opening (cutouts) having area less than 0.30 sqm.The calcium silicate ceiling tile shallhave NRC value of 0.50 (Minimum), light reflection > 85%, noncombustibleas per B.S. 476 part IV, 100% humidity resistance and alsohaving thermal conductivity <0.043 w/m 0 KC.

Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/l.

Providing and applying white cement based birla putty of average thickness 1mm of approved brand for making smooth surface including all complete job as per direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/l.

Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing, cleaning and preparing the walls, scaflolding, washing of floor and taxes all complete as per building specification and direction of E/l.

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade of: New work (two or more coats applied @ 1.43ltr/10sqmm over and including base coat of water proofing cement paint applied @ 2.20kg/10sqm)

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(Internal work)

15mm nominal outer dia pipes

20mm dianominal outer dia pipes

25mm dianominal outer dia pipes

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(Internal work)

32mm nominal outer dia pipes

Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l.

Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., "p" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.

(a) 580mm longwith 12.5 lit. low level P.V.C. cistern

Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/l.

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direcition of E/l.

Supply of materials component for P.H.E including all complete job as per direction of E/I.

Bib cock

Cancealeld stop cock

shower

T.rail

Soap dish

Glass shelf

Mirror(450x300mm)

Making soak pit 2.5m diameter 3.0metre deep with 45x45cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100mm diameter,1.8m long complete as per standard design .with F.P..S.Bricks.

Making plinth protection with bricks of class designation 75 laid on edge in cement mortar 1.6 (1 cement : 6 coarse sand) with 12 mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) over 75mm bed of dry brick aggregate 40mm nominal size rammed, consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1:3 (1 cement : 3 fine sand) :

Finishing walls with Premium Acrylic Smooth exterior paint Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) overexisting cement paint surface with Siliconeadditives of required shade

Providing and placing on terrace(at all floor levels) polyethylene water storage tank ISI 12701 marketed with cover and suitable locking arrangement and making necessary holes for inlet ,outlet and overflow pipes but without fillings and the base supported for tank.

Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

sand lead 8K.M.

chips lead 22K.M.

Brick lead 8K.M(1K+7P)

Wiring for light/fan point/exhaust fan point/call bell Point with 1.5 sq.mm FRPVC insulated copper Conductor single core cable in surface/recessed PVC conduct with Modular type switchmodular plate, Suitable size G.I Box etc. as required.

Group B

Group C

Wiring for circuit/submain wiring along with wiring with the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required.

2x2.5sqmm+1x2.5sqmm earth wire

2 x 4 sq mm +1 x 4 dsq mm earth wire

S/F Modulara Type Electronic Fan regulator

S/F Suitable size G.I.Box on surface/Recess with suitable size ofr phenolic laminated sheet cover in front including providing 3pin 5/6 Amp socket outlet and 5/6 amp. Piano type switch connection as painting etc. as req.

S/F 3 Pin 5 Amp ceiling rose on the existing junction Box wooden block incuidng connection etc as reqd

S/F Brass batton / Angle Holder including connection etc as reqd

S/F the following way SP & N sheet steel M.C.B. D.B. 240 V on surface/recess complete with tinned copper busbar neutral bus bar earth plate dinbar hinged front acrylic cover from MCB knob datachable gland plate inter connection phosphatied and powder painted including earthing etc as required ( without MCB/RCCB/Insolator)

6way single door

8 way single door

S/F”B” series SPMCB: supplying and fixing 6 amps to 32amps rating,240 volts ,10KA,"B" curve, ,miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections ,testing and commissioning etc as required.

6/32 amps,single pole."B" series

Providing and fixing following DP/TP&N sheet metal switch disconnector fuse unit in the existing metal board with rewireable type fuses,including drilling holes in metal board ,making connections etc. as rrequired.

32 amps double pole

supply of 48" ceiling Fan Baja/cromption or any other approved make etc without regulator.and fittings as required Make Havells/khaitan/crompton

supply of 12"exhaust fan in with double ball bearing existing opening and fittings as required Make Havells/khaitan/crompton

Providing and fixing following CAPACITY TP&N disconnector fuse switch unit INSIDE the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel,making connections etc as required.

100 amps,TP&N

S/F following capacity busbar chamber with 4 strips of length 300mm made of copper suitable for following,capacity complete with all accessories including connection,earthing the body etc as reqd..

Supply 35sqmm 3.5 core Aluminium cable including all complete job as per direction of E/I.

Supply of 15/16 watt LED Bulb including all complete job as per direction of E/I.

Supply of 36/40 watt tube light fittings inclouding all complete job as per direction of E/I.

Supply of 4x40 watt putty Single Tube Light fitting including all complete job as per direction of E/I.

Providing Earthing set including all complete job as per direction of E/I.

Supplying 150mm dia submersible pump sets confirming to 8034 and motor confirming to IS 9283 pumpshall be suitable for various delivery head and discharge with stainless steel pump shaft and polyprophylne/noryl impelleer,Motor suitable for working on 415+10,3HP,50 Hz,AC supply with cable guarad,thurst carbon/fiber bearig to with stad entire hydraulic thurst,wataer proof winding shall be provided.The pump set shall be suitable or diret coupling pump shall havge suitable outlet as per manufacturers design.Anti thurst stream lined nonreturn valve shall be provided with pump,3 meter submersible copper conductor cable in single/double run shall be provided witheach pump.Submersible pump set 100mm dia(withpolypropylene/Noryl limpeller) upto20 stages. 2 H.P

Add 12 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

ATUL KUMAR

YOGENDRA SINGH

Sanjay Kumar Pradhan

RAVI SHANKAR SINGH

DHANANJAY KUMAR SINGH

M/S ISHAAN ENGINEERING

Ms Gokul Construction

BABAN SINGH