SPL REPAIR TO ROAD FROM MES IB TO 1 CZW AND ROAD, FOOTPATH AND BERMS FROM TCP-3 TO PUMP HOUSE (P-1531) UNDER GE (WEST) HISAR

Amount

Repair to pot holes of any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal watering and well ramming (including supply of road metal) complete all as specified and directed.

M&L for Preparation of black top surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with air compressor to remove loose dirt etc complete all as specified and directed.

M&L Applying evenly a priming tack coat @ 5 kg per 10 Sqm with paving bitumen VG-10 complete all as specified and directed.

M&L bituminous premix semi dense asphaltic concrete 30mm consolidate thickness with 5.5% binder content paving bitumen VG-30 by weight of total mix and stone dust using as filler material laid with mechanical paver rolled and compacted with 8 to 12 tonne power roller to required camber and gradient complete all as specified and directed.

M&L premix bitumen macadam with binder content 4% of bitumen (paving bitumen VG -30 grade) by the weight of total mix laid, rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with 8 to 12 tonne power roller complete all as specified and directed. Notes for item No 4 to 5:- (i) Premix concrete shall be mixed in hot mix plant, transported from plant to work site and laid / spread by means of mechanical paver. (ii) Filler for semi dense asphaltic concrete shall be stone dust @ 2% of total mix. (iii) Contractor shall quote his rate on the basis of binder as mentioned in this item. If there is any variation in the actual binder content used as per design mix approved by GE, the rate shall be adjusted @ ₹ 35.00 per Kg of binder used. However no price adjustment shall be made if the binder content works out to more than as specified in said items.

Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Add to (or deduct from) last item for every 3 cm or part thereof above or below 15 cm average depth in soft / loose soil complete all as specified and directe.

Rolling and consolidation to required gradient and camber of formation surface (in cutting) or roads with 8 to 12 tonne power road roller including filling in depressions which occur during rolling complete all as specified and directed.

M&L for 100mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in Sub base of ground floors complete all as specified and directed.

S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade including 25mm thick sand cushioning complete all as specified and directed.

M&L Cement concrete type B-2, 1:2:4 using 40mm graded stone aggregate in surface channels and drains complete all as specified and directed.

Removing excavated soil material n.exc 50 mtr and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Desmantling of defective kerb stones fixed by the side of footpath complete all as specified and directed.

M&L providing PCC (1:2:4) type B-1 using 20mm graded mechanically crushed stone aggregate in kerbs stones including necessary form work with plain fair faces, including chamferes, weathering, throating etc, set and jointed in position in CM 1:4 complete all as specified and directed.

M&L for preparation of new / old surfaces providing and making lines, dashes , arrows, letters etc on road with hot applied thermoplastic road marking paint min 2.50 mm thick complete in all respects such as furnishing all labour, material, tool, Equipment incl all incidental cost necessary to carryout the work at site conforming to technical specification clause no.803 of MORTH specifications 4th Revision of 2001/Latest edition complete all as specified and directed.

S&F in repair cat eyes two way reflective panel amber or Red, 31 beads each side Aluminium body size 100 x 100 x 20mm to give the maximum reflection which enhance the visibility of the vehicles during dark and bad light conditions complete all as specified and directed. Make : OSCAR OS-785 or equivalent in makes Dark Eye/Trafitronics.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for cement concrete tiles 20cm x 20cm x 25mm thick machine pressed set jointed with grey cement and pointed in neat cement slurry in floors laid over 20mm thick screed bed in CM (1:4) complete all as specified and directed.

M/s INDER CONSTRUCTION COMPANY

PAWAN KUMAR