SPL REPAIR/REPLACEMENT TO OH CONDUCTOR WITH UG CABLE AT KARAM VIHAR MD ACCN, STREET LIGHTS AROUND COMMAND HOUSE AND SPL REPAIR TO LT PANELS, CABLES AT VIJAY VIHAR AT ZONE -II UNDER GE(S) JAIPUR

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation for laying cable, pole, stay assly etc and getting out in any type of soil complete all as specified and directed. 12/SR(M&O) - 805.55 11/SR(M&O) - 747.23 02/SR(M&O) - 298.89

Returning,filling in and including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified and directed. 12/SR(M&O) - 457.06 11/SR(M&O) - 428.47 02/SR(M&O) - 171.11

Removal excavation material (soil) to a distance n.exc 50m and depositing where directed at a level not more than 1.5m above the starting point complete all as specified and directed. 12/SR(M&O) - 348.48 11/SR(M&O) - 318.75 02/SR(M&O) - 127.78

M&L for sand filling in trenches around under ground cable with tibba sand and jently punning down to provide cable cushion complete all as specified & directed. 12/SR(M&O) - 241.66 11/SR(M&O) - 224.00 02/SR(M&O) - 89.67

M&L Brick class "B" brick old size as in protection to under ground cables laid dry, flat & jointly to other complete all as specified. 12/SR(M&O) - 25 11/SR(M&O) - 23 02/SR(M&O) - 9.63

Supply, laying, testing and commissioning of LT UG cable XLPE insulated screened PVC bedded galvanized steel strips or wire armoured, electric power cables (heavy duty) ISI maked with stranded aluminium conductor, 1100 volts grade in trenches/ducts/ through pipes under roads of following sizes, complete all as specified.

10 Sq.mm 4 core 12/SR(M&O) - 0 11/SR(M&O) - 0 02/SR(M&O) - 350

16 Sq.mm 4 core 12/SR(M&O) - 1750 11/SR(M&O) - 0 02/SR(M&O) - 350

25 Sq.mm 3.5 core 12/SR(M&O) - 0 11/SR(M&O) - 1250 02/SR(M&O) - 0

35 Sq.mm 3.5 core 12/SR(M&O) - 670 11/SR(M&O) - 1740 02/SR(M&O) - 0

50 Sq.mm 3.5 core 12/SR(M&O) - 635 11/SR(M&O) - 0 02/SR(M&O) - 530

95 Sq.mm 3.5 core 12/SR(M&O) - 0 11/SR(M&O) - 85 02/SR(M&O) - 0

150 Sq.mm 3.5 core 12/SR(M&O) - 260 11/SR(M&O) - 0 02/SR(M&O) - 0

S& F in replacement cable junction box of size 260x210x116 for outdoor installation IP-65 protected made of poly carbonate with necessary clamps (2 Nos) for mounting on poles, comprising with copper bus bar for 3 phases and neutral of required amps capacity for cable size 16/35 sqmm 4 core, phase and neutral fixed on porcelain insulator and MCB, SP 0.5 to 6 amps, 10 KA - 01 Nos complete including taking down old unsv junction box complete. Make- Hensel cat part K8350 or equivalent in Sintex/ legrand 12/SR(M&O) - 46 11/SR(M&O) - 92 02/SR(M&O) - 15

M & L for jointing, testing out door type cable termination (heat shrinkable) earthered jointing kit suitable for 1100 volts underground LT XLPE cable of size above 25 Sqmm and upto 70 Sqmm 3 1/2 core including taking out old/unserviceable joints complete including dismantling the existing one, complete all as directed. 12/SR(M&O) - 2 11/SR(M&O) - 3 02/SR(M&O) - 0

M & L for jointing, testing out door type cable termination (heat shrinkable) earthered jointing kit suitable for 1100 volts underground LT XLPE cable of size above 70 sqmm and upto 185 sqmm 3 1/2 core including taking out old/unserviceable joints complete including dismantling the existing one, complete all as directed.' 12/SR(M&O) - 2 11/SR(M&O) -0 02/SR(M&O) - 0

M&L for jointing, testing straight thought joint heat shrinkable jointing kit for 1100 volt underground cable of size 10 sqmm to 35 sqmm any core all as directed by Engineer-in-charge. 12/SR(M&O) - 0 11/SR(M&O) -0 02/SR(M&O) - 8

M&L for jointing, testing straight thought joint heat shrinkable jointing kit for 1100 volt underground cable of size above 35 sqmm upto 95 sqmm 3.5 core all as directed by Engineer-in-charge. 12/SR(M&O) - 0 11/SR(M&O) -0 02/SR(M&O) - 5

Material and labour for earthing complete as per electrical plate No 2 with galvanised steel pipe electrode, 40mm bore, medium grade with galvanised mild steel strip 32x6mm thick earth electrode, buried vertically in ground by drilling 100mm dia and 12 mtr deep below normal ground level, surrounded from all sides by charcoal dust and common salt in alternative layers of 15cm depth and earth electrode and connected with equipments by means of bolts, nuts, check nuts and washers of galvanised iron and connection to earth mesh including iron and connection to earth mesh including welding work and compacted with fine charcoal after installing earth electrode, pipe and excavation, earth work and filling pit with PCC 1:2:4 type B-1, C1 Frame with cover all as shown in electrical plate of SSR Part-I (2009) including testing on completion including dismantling of existing one complete all as specified and as directed. 12/SR(M&O) - 8 11/SR(M&O) -0 02/SR(M&O) - 0

M & L Earthing complete as per electrical plate No. 3 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly vertically in ground in a pit of depth not less than 2.5 metres below ground level with top edge of earth plate at a depth not less then 1.8 metre below normal ground level connected to and including galvanised iron or steel earth strip 32mm x 6mm by means of bolts, nuts check nuts and washers of galvanised iron. Earthing strip shall be protected by galvanised iron or steel pipe 40 mm bore light grade and connected to continuous earth strip on test point. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel PCC pit and RCC cover complete all as specified & directed. Note 1- Following items deemed to be included in quoted rate (a) Earth electrode (b) Main earthing lead from earth electrode to test point and further to equipment to be earthed upto 7.5 meter (c) Material and labour for connecting earth electrode and earthing lead as specified (d) Adequate quantity of charcoal dust and common salt as per direction (e) All labour involved including testing of earth network.(f) Excavation and earth work or drilling holes for electrode (g) P.C.C pit and C.I cover (h) Funnel with watering pipe, wire mesh and copper lugs etc as specified (j) G.I protection pipe pipe of size ordered specified for protection of earthing lead from mechanical injury or tempering. Note 2. On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. 12/SR(M&O) - 0 11/SR(M&O) -2 02/SR(M&O) - 12

M&L for boring of existing road/path for laying of GI pipe upto 100 mm bore protection for UG cable including making good disturbed surface all as spd 12/SR(M&O) - 45 11/SR(M&O) - 40 02/SR(M&O) - 70

Supply and fixing or laying galvanised steel tubing light grade (ISI marked) for protection of underground cable on poles/walls under road crossing etc of following sizes

100 mm bore 12/SR(M&O) - 30 11/SR(M&O) - 0 02/SR(M&O) - 0

80 mm bore 12/SR(M&O) - 24 11/SR(M&O) - 30 02/SR(M&O) - 40

50 mm bore 12/SR(M&O) - 50 11/SR(M&O) - 145 02/SR(M&O) - 30

S & F of 1100 volts grade heavy duty cable PVC insulated copper conductor cable with inner sheathing of pvc tape and overall PVC sheathed in service connection two core stranded copper conductor of size 1.5 Sqmm drawn through steel pole from junction box to street light fitting complete all as specified and directed by Engr-in-charge. 12/SR(M&O) - 420 11/SR(M&O) - 950 02/SR(M&O) - 120

Dismantling old existing ACSR conductor of any type/size all as directed by Engr-in-Charge. 12/SR(M&O) - 1.85 11/SR(M&O) - 2.00 02/SR(M&O) - 2.10

Dismantling old existing GI earth wire of any size complete. 12/SR(M&O) - 0.5 11/SR(M&O) - 0.9 02/SR(M&O) - 0

Dismantling old existing MS cross arms of any type/shape. 12/SR(M&O) - .85 11/SR(M&O) - 1.0 02/SR(M&O) - 1.9

Dismantling old existing Insulators of any type/shape all as directed by Engr-in-Charge. 12/SR(M&O) - 50 11/SR(M&O) -90 02/SR(M&O) - 50

Dismantling old existing pole of any type/shape all as directed by Engr-in-Charge. 12/SR(M&O) - 0 11/SR(M&O) - 5 02/SR(M&O) - 0

Supply and fixing of LT cable route indicator cast iron body conforming indian electrical standard fixed in and incl earth work & PCC Block work as per direction of Engineer in charge. 12/SR(M&O) - 80 11/SR(M&O) -0 02/SR(M&O) - 0

M&L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paint. 12/SR(M&O) - 0.5 11/SR(M&O) - 0.75 02/SR(M&O) - 0

Supply & install steel tubular swaged poles Type 410 SP-31 (9.0 metres long) complete with CI base plate and finial including taking down of exiting pole including following :- (a) Painting of poles with one coat of red oxide primer and two coat of aluminium paint before fixing and one coat of aluminium paint after fixing complete, embedded portion shall be painted with two coat of black bituminous paint all as specified. (b) The portion above coping shall be painted in alternative bands of black & white colour starting with white colour (each band of 30 cm wide) by two coat of synthetic enameled paint upto 1.5 m height . 12/SR(M&O) - 0 11/SR(M&O) - 5 02/SR(M&O) - 0

Material & Labour for preparation of old painted surface of LT RCC pole (up to 6.10 metre height above coping), applying two coat cement base paint, making of strip of 20 cm width (sky blue and white in alternate band) upto 1400 mm height with one synthetic enamel paint, rewriting pole No by painter with enamel paint, and painting the existing MS clamp with one coat aluminum paint complete. 12/SR(M&O) - 0 11/SR(M&O) - 92 02/SR(M&O) - 0

M & L PCC (1:3:6) type C-2 using 40 mm graded stone aggregate for foundation of stay assembly / struts / poles etc. 12/SR(M&O) - 0 11/SR(M&O) - 2.025 02/SR(M&O) - 0

M & L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping of electric pole including form work complete. 12/SR(M&O) - 0 11/SR(M&O) - 0.6 02/SR(M&O) - 0

Supply and fixing of New Generation Energy Saving LED street light top opening 60 watt. powder coated coted PDC aluminium housing with intgrated lens Polycarbonate cover,SMD LED with integrated lens cover,body with toughened glass complete. (Make - Havells cat part No ENDURAPEARLNEOSL 60W LED or equilavent cat part in other makes as per appendix 'B') 12/SR(M&O) - 0 11/SR(M&O) - 10 02/SR(M&O) - 0

S & F GI pipe bracket 40mm bore single swan neck shape suitable to fix on top of tubular pole complete with nuts, bolts and washers and FI clamps etc including two coats of aluminium paint/ white synthetic enamel paint complete. 12/SR(M&O) - 0 11/SR(M&O) - 10 02/SR(M&O) - 0

SHREE BHAGWATI ENTERPRISES

M/S Anil Enterprises

BAKSHI BUILDERS PVT LTD

KARNI CONSTRUCTION COMPANY