Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.2 LAccepted-AOC AT BALU BANKER PO BERMO DIST BOKARO 825102 | BOKARO | JHARKHAND | 825102 | ₹9.2 L | L1 | Accepted-AOC Deposited performance security |
| 2 | L2₹9.5 LRejected-Finance 159 KASIYADIH TANDWA CHATRA CHATRA JHARKHAND 825321 UDYAM JH 02 0001826 | CHATRA | JHARKHAND | 825321 | ₹9.5 L | L2 | Rejected-Finance Rejected as NOT L1 bidder |
| 3 | Rejected-Technical GUNJARDIH BHANDARIDAH BOKARO JHARKHAND PIN NO 829132 | BOKARO | JHARKHAND | 829132 | - | - | Rejected-Technical Technically disqualified |
| Sl No | Description | Qty | Unit | M/S UPENDRA ELECTRICAL L1 | ARJUN ENTERPRISES L2 |
|---|---|---|---|---|---|
| 1.00 | Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres. | 18 | cum | 481.08 ₹8,659.44 | 500 ₹9,000 |
| 2.00 | Providing and making steel pole collarwith cement concrete (1cement:3 coarsesand:6stoneaggregate20mm)ofspecifiedsizeandshape including formwork,plasteringif required,curingetcasrequired.(volumeofpole/pipe not to be deducted) | 6.48 | cum | 6,287.8 ₹40,744.94 | 6,500 ₹42,120 |
| 3.00 | Cutting of MS Sheet in (3' X 4') and (4'x5') for fitting into frame | 11,520 | inch | 12.66 ₹1.5 L | 13 ₹1.5 L |
| 4.00 | Double layer Welding of MS sheet into frame in (3' X 4') and (4'x5') for fitting into frame | 11,520 | inch | 15.49 ₹1.8 L | 16 ₹1.8 L |
| 5.00 | Cutting of 65mmX65mmX6 mm angles for 3'X4 and 5'X4' board. | 2,149.6 | inch | 12.66 ₹27,213.94 | 13 ₹27,944.80 |
| 6.00 | Double layer welding of angles for making frame of 3' X 4' and 4' X 5' | 1,228 | inch | 15.49 ₹19,018.53 | 16 ₹19,648 |
| 7.00 | Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works ( 3' X 4' and 4'x 5'board MS Sheet and 65mx65mx6m angle frame) | 315.37 | sqm | 44.15 ₹13,924.14 | 45 ₹14,191.65 |
| 8.00 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | 315.37 | sqm | 153.34 ₹48,360.18 | 150 ₹47,305.50 |
| 9.00 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coatsonnewworkover anunder coat of suitable shade with ordinary paint of approved brand and manufacture (2inch wide Border making) | 14.63 | sqm | 153.5 ₹2,245.74 | 150 ₹2,194.50 |
| 10.00 | Lettering with black Japan (or any shade) paint of approved brand and manufacture (10 cm)= 10 X 3.70 = 37 as and when required for writing on safety board and walls | 3,000 | No. | 39.03 ₹1.2 L | 40 ₹1.2 L |
Tender Value
₹8.7 L
EMD Value
₹10,900
Closing Date
15 Sept 2025, 11:00 amClosed
SO(EnM), BnK
GM Office, BnK Area, Bermo, Bokaro, Jharkhand.
Fabrication, painting, writing slogan, and erection of safety board for all the project under BnK Area
2025_CCL_343073_5
SO(EnM)/e-tender/25-26/10
Open Tender
Miscellaneous Works
21 days
MRSS
As per NIT
2 documents required · 2 mandatory
₹10,900
25 Dec 2025
4 Sept 2025
16 Sept 2025
4 Sept 2025
15 Sept 2025
5 Sept 2025
4 Sept 2025 - 11 Sept 2025
Amount
Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres.
Providing and making steel pole collarwith cement concrete (1cement:3 coarsesand:6stoneaggregate20mm)ofspecifiedsizeandshape including formwork,plasteringif required,curingetcasrequired.(volumeofpole/pipe not to be deducted)
Cutting of MS Sheet in (3' X 4') and (4'x5') for fitting into frame
Double layer Welding of MS sheet into frame in (3' X 4') and (4'x5') for fitting into frame
Cutting of 65mmX65mmX6 mm angles for 3'X4 and 5'X4' board.
Double layer welding of angles for making frame of 3' X 4' and 4' X 5'
Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works ( 3' X 4' and 4'x 5'board MS Sheet and 65mx65mx6m angle frame)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coatsonnewworkover anunder coat of suitable shade with ordinary paint of approved brand and manufacture (2inch wide Border making)
Lettering with black Japan (or any shade) paint of approved brand and manufacture (10 cm)= 10 X 3.70 = 37 as and when required for writing on safety board and walls
Lettering with black Japan (or any shade) paint of approved brand and manufacture (15 cm)= 15 X 3.70 = 55.5 as and when required on safety board and walls
Total impact of GST for the purpose of CTC
ARJUN ENTERPRISES (BID ID -1183709)
stage.html
html • 0.04 MB
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid