Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.2 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹4.7 L+₹52,200 (12.4%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹5.2 L+₹96,700 (23.0%)Admitted-Finance | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S SALSABEEL TUBE WALL ENGINEERING L2 | M/S CHINAR DRILLERS L1 | M/S GOLDEN ENGINEERING BOREWLLS L3 |
|---|---|---|---|---|---|---|
| 1.00 | Drilling of 125 mm diameter tube well by air rotary drilling rig unit suitable for lowering of MS casing of 125mm diameter in suitably drilled bore hole as per specifications laid down in IS 2800 (Part-I ) with up to date amendments. The job is to be done in all kinds of soils, boulder, rocks, collapsible strata, saturated soils, artisan conditions by ODEX/DTH attachments and exploration of ground water by tapping sufficient aquifer zones. The job includes the cost of shifting of drilling accessories, tools, bits, casing shoe, consumables like fuel, lubricants, skilled and unskilled labours and other unforeseen items. Development of tube well with backwash method with air compressor of minimum capacity 1000 CFM (300 PSI air delivery system) with suitable arrangements till well is thoroughly developed in all respects as per the directions of site engineer. | 80 | Mtr | 2,500 ₹2,00,000 | 2,100 ₹1,68,000 Lowest | 2,700 ₹2,16,000 |
| 2.00 | Supplying, assembling, lowering and fixing in vertical position in bore well ERW Fe 410 mild steel screwed or socketed/plain ended 125 mm nominal dia (MS 125 mm) casing pipe conforming to IS: 4270:2001 with upto date amendments of reputed & approved make, including painting of outside brand and manufacture including required transportation hire & labor charges, fitting/welding and accessories all complete for all depths as per direction of engineer in charge. The casing pipe is to be slotted as per the site requirement and as directed by site engineer. | 80 | Mtr | 2,150 ₹1,72,000 | 2,000 ₹1,60,000 Lowest | 2,500 ₹2,00,000 |
| 3.00 | Providing, Fitting, and commissioning of Single Phase Submersible type pumping unit along with allied jobs. Complete details of the job are: P/F/T and commissioning of single phase pumping equipment following specifications: Power: 1.5 H.P/2HP, Discharge – 800-600 GPH, Head 70-90 mtrs. The pump motor is coupled together with a steel coupling. The job includes lowering of the submersible pump equipment and P/F starter. | 1 | No. | 28,000 ₹28,000 | 27,000 ₹27,000 Lowest | 28,000 ₹28,000 |
| 4.00 | Providing and fitting of 32 mm dia.GI (B-class) column pipe. The pipe is properly threaded at both ends and the length of each pipe is 3 m. The pipe is provided and fitted with GI sockets for jointing purpose. | 18 | No. | 1,800 ₹32,400 | 1,200 ₹21,600 Lowest | 1,800 ₹32,400 |
| 5.00 | Providing and fitting of 05 KVA single phase automatic/manual voltage stabilizer as per site requirement. The job also includes P/F of copper wire of suitable gauge required for connecting of incoming and outgoing connections. | 1 | No. | 15,500 ₹15,500 Lowest | 20,000 ₹20,000 | 15,500 ₹15,500 Lowest |
| 6.00 | Providing and Fitting of submersible cable of 2.5 sq. mm for connecting pumping unit. | 60 | Mtr | 130 ₹7,800 Lowest | 180 ₹10,800 | 130 ₹7,800 Lowest |
| 7.00 | Providing and Fitting of 32 mm dia. MS holding clamps fabricated out of 10 mm thick MS Plate with nuts and bolts. | 2 | No. | 1,000 ₹2,000 Lowest | 1,500 ₹3,000 | 1,000 ₹2,000 Lowest |
| 8.00 | Providing and fitting of reducer 32mm – 25 mm dia. The job also includes P/F of 32mm dia G.I bend. MOC: B class, well cap of required dia. | 1 | Job | 2,800 ₹2,800 | 1,000 ₹1,000 Lowest | 2,800 ₹2,800 |
| 9.00 | Providing and Fitting of 05 mm Steel wire rope for holding submersible pumping unit. | 60 | Mtr | 100 ₹6,000 | 40 ₹2,400 Lowest | 100 ₹6,000 |
| 10.00 | Providing/Laying of Plain Cement Concrete block of size 4ft×4ft×1ft in 1:3:6 mix to give adequate strength to act as a sanitary block for the well and to grout the hand pump assembly in order to make it robust to resist shock load observed while pumping. The job includes Providing/laying of PCC edges of 4”×4” in 1:3:6 mix and P/L of cement plaster in 1:4 mix to the above block to give aesthetically good appearance. Cost on account of stuttering, strutting, centering, curing etc. is included in the scope of work. In case the suitable space for the above specification is not available, the surface area is to be adjusted accordingly. | 1 | Job | 5,500 ₹5,500 Lowest | 6,000 ₹6,000 | 6,000 ₹6,000 |
Tender Value
₹4.7 L
EMD Value
₹14,200
Closing Date
4 Dec 2025, 3:00 pmClosed
Ex. Engineer JS PHE GWD Srinagar
Ex. Engineer JS PHE GWD Srinagar, Baghi Ali Mardan Nowshera Srinagar
Construction of Bore Well with alalied works at Qazipora Tehsil Chadoora NLO farooq SAhmad Dar S/o Ab. Rashid Dar in District Budgam.
2025_PHE_296521_3
e-NIT No 63 of 2025 26.
Open Tender
Drilling Works
Item Rate
10 days
Chadoora Budgam
Please refer Tender documents.
2 documents required · 2 mandatory
₹300
Yes
Ex. Engineer JS PHE GWD Srinagar
₹14,200
Yes
18 Dec 2025
27 Nov 2025
5 Dec 2025
27 Nov 2025
4 Dec 2025
27 Nov 2025
Amount
Drilling of 125 mm diameter tube well by air rotary drilling rig unit suitable for lowering of MS casing of 125mm diameter in suitably drilled bore hole as per specifications laid down in IS 2800 (Part-I ) with up to date amendments. The job is to be done in all kinds of soils, boulder, rocks, collapsible strata, saturated soils, artisan conditions by ODEX/DTH attachments and exploration of ground water by tapping sufficient aquifer zones. The job includes the cost of shifting of drilling accessories, tools, bits, casing shoe, consumables like fuel, lubricants, skilled and unskilled labours and other unforeseen items. Development of tube well with backwash method with air compressor of minimum capacity 1000 CFM (300 PSI air delivery system) with suitable arrangements till well is thoroughly developed in all respects as per the directions of site engineer.
Supplying, assembling, lowering and fixing in vertical position in bore well ERW Fe 410 mild steel screwed or socketed/plain ended 125 mm nominal dia (MS 125 mm) casing pipe conforming to IS: 4270:2001 with upto date amendments of reputed & approved make, including painting of outside brand and manufacture including required transportation hire & labor charges, fitting/welding and accessories all complete for all depths as per direction of engineer in charge. The casing pipe is to be slotted as per the site requirement and as directed by site engineer.
Providing, Fitting, and commissioning of Single Phase Submersible type pumping unit along with allied jobs. Complete details of the job are: P/F/T and commissioning of single phase pumping equipment following specifications: Power: 1.5 H.P/2HP, Discharge – 800-600 GPH, Head 70-90 mtrs. The pump motor is coupled together with a steel coupling. The job includes lowering of the submersible pump equipment and P/F starter.
Providing and fitting of 32 mm dia.GI (B-class) column pipe. The pipe is properly threaded at both ends and the length of each pipe is 3 m. The pipe is provided and fitted with GI sockets for jointing purpose.
Providing and fitting of 05 KVA single phase automatic/manual voltage stabilizer as per site requirement. The job also includes P/F of copper wire of suitable gauge required for connecting of incoming and outgoing connections.
Providing and Fitting of submersible cable of 2.5 sq. mm for connecting pumping unit.
Providing and Fitting of 32 mm dia. MS holding clamps fabricated out of 10 mm thick MS Plate with nuts and bolts.
Providing and fitting of reducer 32mm – 25 mm dia. The job also includes P/F of 32mm dia G.I bend. MOC: B class, well cap of required dia.
Providing and Fitting of 05 mm Steel wire rope for holding submersible pumping unit.
Providing/Laying of Plain Cement Concrete block of size 4ft×4ft×1ft in 1:3:6 mix to give adequate strength to act as a sanitary block for the well and to grout the hand pump assembly in order to make it robust to resist shock load observed while pumping. The job includes Providing/laying of PCC edges of 4”×4” in 1:3:6 mix and P/L of cement plaster in 1:4 mix to the above block to give aesthetically good appearance. Cost on account of stuttering, strutting, centering, curing etc. is included in the scope of work. In case the suitable space for the above specification is not available, the surface area is to be adjusted accordingly.
M/S SALSABEEL TUBE WALL ENGINEERING (BID ID -2659883)
M/S GOLDEN ENGINEERING BOREWLLS (BID ID -2660267)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.10 MB
BOQ_960849.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .