Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹26.5 LAdmitted-Finance FLAT NO 102 SPLENDOR BLDG BEHIND CAMPAL CLINIC ST INEZ PANAJI GOA | -20.00% | ₹26.5 L | L1 | Admitted-Finance |
| 2 | L1₹26.5 LAdmitted-Finance A 3 NEAR GRP QUARTERS ALTINHO PANAJI GOA | NORTH GOA | GOA | 403001 | -20.00% | ₹26.5 L | L1 | Admitted-Finance |
| 3 | L2₹33.1 LAdmitted-Finance | +0.00% | ₹33.1 L | L2 | Admitted-Finance |
| 4 | L3₹33.8 LAdmitted-Finance H NO 830 8 BLOC D FF 3 ST CRUZ GOA | +2.00% | ₹33.8 L | L3 | Admitted-Finance |
Tender Value
₹33.1 L
EMD Value
₹66,272
Closing Date
19 Jan 2026, 3:00 pmClosed
Executive Engineer I
Executive Engineer I, WDI(Bldgs.) PWD, Panaji Goa.
Renovation to toilet blocks at 1st, 2nd, 3rd, 4th, 6th, 7th floor and toilet for physically disabled at ground floor of Shram Shakti Bhavan Patto-Panaji.
2026_PWD_27138_1
PWD/WDI/ASW-17/2025-26/52/01
Open Tender
Civil Works - Buildings
60 days
Executive Engineer I, WDI(Bldgs.) PWD, Panaji Goa.
Please refer Tender documents.
3 documents required · 3 mandatory
₹6,000
₹66,272
23 Jan 2026
12 Jan 2026
20 Jan 2026
12 Jan 2026
19 Jan 2026
12 Jan 2026
Dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Lead a) Of area 3 sq.m. and below
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead.
Removing old loose bottom or side cover of RCC slab, beam, columns etc. rubbing surface of concrete steel using wire brush and applying 2 coats of Alkaline rust converting primer (Feovert) after a waiting time of 6 hrs between coats and then applying another anti corrosive protective coating system ) for reinforcement bars (IPNet-RB) Conforms to IS-2770 Part-1 (Pull out Test) ASTM-3963-86 (Adhesion Test) and then applying concrete penetrating corrosion inhibitor (EPCO-KP100) and applying bonding new to old concrete (Epibond) Conforms to ASTM-C-882-87 and plastering on the fresh bond coat with Polymer Modified Mortar (Monobond) with 20mm C.M 1:3 and finishing coat of 6mm C.P 1:3 (1 Cement : 3 Sand ) incl. cost of transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent.
12mm cement plaster 1:3 (1 cement : 3 fine sand)
Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm.
Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.
Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete. c)Wall Ceramic Glazed Tiles : 300 x 600
Providing and fixing vitrified antiskid tiles (320x320) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete.
Dismantling of existing G.I pipe including disposal of unserviceable material and stacking of serviceable materials . A)Upto 20 mm nominal bore
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. I SCH-80(blue)/(white) a)25mm outer dia.
Dismantling G.I. or asbestos rain water pipes with fittings and clamps including stacking the material within 50 mts. lead. 75mm to 150 mm dia.
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed: a)110 mm dia
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed: b)75 mm dia
Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : a) 110 mm dia
Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : b)75 mm dia
Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : a)100 mm dia
Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : a) 75 mm dia
Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : b)75 mm dia
Providing and fixing in position 32 mm diameter glavanised steel telescopic flush pipe complete including and cutting and making good the walls and floors.
Proving and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid, C.P. brass hinges and rubber buffers 10 lts. High level P.V.C.. flushing cistern (of approved make ) with fittings, rack bolts 32 mm diameter P.V.C. telescopic flush pipe with fit tings and clamps 25mm P.V.C.. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete, cutting and making good the walls ad floors where required. a )W.C. pan with white plastic seat and lid.
Providing and fixing white vitreous china flat back Large lipped front urinal basin of 590x375x390mm size with Urinal Valve Auto closing system with built in control cock & wall flange with fittings, spreader, R.S. or C.I. brackets, standard size C.P. Brassl flush pipe and spreaders with C. P. brass unions & C. P. Brass clamps with waste fitting as per IS 2556, PVC trap with outlet grating and other couplings in CP Brass complete, including painting, fittings, cutting and making good the walls and floors where required. - Range of one urinal basin
Providing 20mm thick marble slab to urinal partitions with cement complete
Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers.
Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw
Providing and fixing NICKEL chrome plated copper alloy Fancy two way long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 15mm nominal bore
Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.
Providing and fixing Granite stone slabs (mirror polished) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete a)Jet black
Providing 25 mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the engineer-in-charge
Providing and fixing NICKEL chrome plated copper alloy Fancy Pillar Cock with extended lever handle and wall flange Confirming to IS 8931; 1993 15mm nominal bore
Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with sheet flance 20mm Jaquar make or equivalent. Confirming to IS 8931;1993 a)20mm nominal bore
Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore: a)30 cm (12”) length .
Providing and fixing toilet paper holder : a)C.P. brass
Providing & fixing (4’) 100 mm sand cast iron grating for gully floor or nahni trap.
20 MM DOOR SHUTTER:- Providing & fixing 20 mm door shutter Yashashri make or equivalent, made by using 20mm x 155mm x 1.2mm upvc multi-cavity section and boarder of 30mm x 40mm x 2.5mm Upvc multi cavity section. The corners are joined by inserting polymetric corners & hardware used for fixing the door shutter is stainless steel hinges & S. S. handle & S.S. tower bolt. The average weight of 20mm door shutter is 4.60kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods.
UPVC ONLY DOOR FRAME:- Providing & fixing Upvc Door Frame Yashashri make or equivalent made out of Upvc extruded multi cavity frame of 60 mm x 60mm x 2mm wall thickness. Frame is reinforced with G.I. Channel & welded in corners with Average weight 0.80 kg per running mtr. These frames are tested by using BS 2782 & DIN 53459 test methods.
Applying one coat of distemper primer of approved brand and manufacture on wall surface.
Removing white or colour wash by scrapping, sand papering and preparing surface smooth including necessary repairs to scratches etc. complete.
Distempering (one/ more coat) with oil bound washable distemper of approved brand and manufacture and of required shade on old work to give an even shade.
Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. a Flat back wash basin size 630 x 450mm with a pair of 15 mm C.P. brass pillar taps.
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/Cuddapah stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
Extra for providing and fixing prince or equivalent make PVS SWR pipe clip for socketed half round eaves gutters. A) 75 mm nominal size
Extra for providing and fixing prince or equivalent make PVS SWR pipe clip for socketed half round eaves gutters. B)110 mm nominal size
Brick work using common burnt building bricks in cement mortar 1:3 (1 cement : 3 coarse sand) with bricks of class designation 75 kg/ cm2 (wire cut bricks) b)In superstructure upto floor five level.
Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996. a )200 lit .capacity
Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design : a) 100 x 100 mm size P type
supply of labour
A)By tipper truck including loading unloading and stacking: (A) Lime,building rubbish, manure sludge, moorum excavated rock (i) Lime,moorum, building rubbish beyond 10 upto 20 km per km
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.32 MB
Tendernotice_2.pdf
PDF • 1.65 MB
BOQ_27580.xls
BOQ • 0.44 MB
Download all tender documents and submit your bid