NIT NO.22 ITEM NO.02

Amount

Supplying,lowering and fixing of GI pipe medium (M-Class) i/c cutting threading on both sides etc. ISI marked etc as required 50 mm dia (Nominal Bore)

Supplying,lowering and fixing of GI pipe medium (M-Class) i/c cutting threading on both sides etc. ISI marked etc as required 65 mm dia (Nominal Bore)

Supplying,Installation,testing and commissioning of three phase Centrifugal Monobloc pumpset complete with all accessories suitable to 415 V ,50 Hz AC ,7.5 HP (5.5 KW) three phase pumpset supply head 24-36 meter suction and delivery 65x50 mm, discharge range 780-400 LPM etc as required.

Supplying,Installation,testing and commissioning of three phase Horizontal OpenWell submersible pumpset complete with all accessories suitable to 415 V ,50 Hz AC ,7.5 HP (5.5 KW) three phase pumpset supply head 33-57 meter suction and delivery 65x50 mm, discharge range 660-200 LPM etc as required.

S&F following size of G.I.Socket as required.50mm

S&F following size of G.I.Socket as required.65mm

S&F following size of G.I.Union as required.50mm

S&F following size of G.I.Union as required.65mm

S&F following size of G.I.Elbow as required.50mm

S&F following size of G.I.Elbow as required.65mm

S&F following size of Brass foot Valve as required.65mm

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm dia

P&F following sizes of PVC insulated & PVC sheathed copper conductor 3 core submersible cable conforming to IS 694/1990 etc as required.3x10 sqmm

Supply,installation,testing and commissioning of cubical type control panel board for single phase & three phase submersible pumping set of following rating complete with contactor,relay,MCB,Condenser,voltmeter,ammeter and indication lamp etc including connctions etc as required.10 HP ( Three Phase)

Supplying and fixing following rating , four pole( three phase and neutral),415 volts, residual current circuit breaker(RCCB)having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required 63 amp

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting andcutting, jointing etc..direct in ground (75 cm below ground level)including excavation and refilling the trench but excluding sandushioning and protective covering etc., complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal).

Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement :4 coarse sand) at all levels.

Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels.

Providing and laying in position cement concrete 1:3:6 (1 cement : 2 coarse sand : 6 graded stone aggregate 40 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

Supply and fabrication of pole protection system made up 8SWG steel wire mesh of size 25mmx75mm rectangular with 50mmx50mmx6mm MS angle iron for supporting the mesh i/c MV danger plate and grounding the protection system in suitable quality of CC etc as reqd.

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thickincluding accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required .

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I.pipe from earth electrode including connection with G.I. nut, bolt,spring, washer excavation and re-filling etc. as required.

Shree Om Traders

Vikas Electrical Store