Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.7 LAccepted-AOC OLD PULL MADIYA JAIRAMPUR AZAMGARH AZAMGARH UTTAR PRADESH 276001 | AZAMGARH | UTTAR PRADESH | 276001 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹36.2 L+₹1.4 L (4.01%)Rejected-Finance | L2 | Rejected-Finance Higher Bidder |
Tender Value
Refer Docs
EMD Value
₹81,200
Closing Date
22 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Ferozepur Cantt
CWE Ferozepur Cantt, PIN-152001
CWE/FZR-22/2023-24 Spl repair of Md Accn Bldg No P-56 of 550 Acre at Engr Regt under GE(East) Ferozepur Cantt
2023_MES_625016_1
CWE/FZR-22/2023-24
Open Tender
Civil Works
Item Rate
180 days
Ferozepur Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE(East) Ferozepur Cantt
₹81,200
Yes
1 Jan 2024
26 Oct 2023
29 Nov 2023
26 Oct 2023
22 Nov 2023
9 Nov 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar beding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in flooring etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with colour of tiles over and incl screed bedding 15mm thick in cm(1:6),complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing non skid coloured ceramic tiles 7 to 8 mm thick (Square/Rectangular) area of each tile exe 0.11 Sqm but not exe 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with colour of tiles over and incl screed bedding 15mm thick in cm(1:4),complete all as specified and as directed by Engineer-in-Charge.
Material and labour Glazed Ceramic coloured tiles in vertical surface 350 x 250 x 7mm/450 x 300 x 7 mm thick primium quality over and incl 10 mm thick rendering in CM 1:4 on vertical surfaces, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match colour of tiles complete all as specified and as directed by Engineer-in-Charge.
Material and labour machine cut Prepolished kota stone flooring 18-20 mm thick over & including 20mm thick screed bed in cement mortar 1:6, laid jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge.
Material and labour machine cut Prepolished kota stone 16-18 mm thick as in risers of steps, skirting, dado etc over & including 15mm thick rendering in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing ccomplete all as specified and as directed by Engineer-in-Charge..
Material and labour for Granite (of any type) tiles 18 mm thick machine cut, using 15 mm thick rendering in CM 1:6, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed by Engineer-in-Charge.
Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour Rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces finished even and fair complete all as specified and as directed by Engineer-in-Charge.
Material and labour Rendering/plastering, 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces finished even and fair complete all as specified and as directed by Engineer-in-Charge.
Material and labour Rendering/plastering, 5mm thick in cement mortar (1:3) on concrete surfaces, finished even and fair as in ceiling complete all as specified and as directed by Engineer-in-Charge.
Material and labour for applying two coats of Cement base paint over a coat of primer on newly plastered surfaces of walls including preparation of surfaces complete all as specified.
Material and labour for applying three coats of White wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour for applying two coats of oil bound distemper of new plastered wall surfaces of wall including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour for applying three coats of White wash on newly plastered surfaces of wall including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour for applying two coat of Oil Bound distemper on old surfaces of wall including preparation of surface complete all as specified and as directed by Engineer-in-Charge.
Material and labour for applying two coats of white wash on old Ceiling surface including preparation of surface complete all as specified and as directed by Engineer-in-Charge.
Material and labour for applying two coat of Cement base paint over old surface of walls including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour for applying two coat of white wash over old surface of walls including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exc 1.50 Sqm each including cutting holes of appropriate size for insertion blocks of cement concrete for hold fasts complete all as specified and as directed by Engineer-in-Charge.
All as per item No 20 here-in-before but size exceeding 1.5 Sqm & not exceeding 4 Sqm each complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with one or more rebates incl lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint incl hinges, hold fasts/lugs etc including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified and as directed by Engineer-in-Charge.
Material and labour Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in bed blocks of hold fasts, coping etc including necessary form work complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 35mm thick, 2nd class hard wood (Hollock), glazed and skelton shutters, open rebated and prepared to receive glass/ gauge etc divided in to squares with plain rounded mitered and rebated sash bars any numbers, fitted with cut and mitered beads for securing glass etc size of members as specified in clause 8.24 (a) of MES Schedule Part-I in Section-8, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 30mm thick, Flush shutters, solid core construction, with partical board core, commercial type on both sides,one face is covered with deco rative face veneer with lipping/frame to match complete all as specified and as directed by Engineer-in-Charge.
Material and labour Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed by Engineer-in-Charge.
Material and labour solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement and fixed in the frame at site complete all as specified in clause 8 B.2.1 of MES schedule Part-II (2004). complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) 2 mm thick frame for doors, windows, ventilators with one or more rebates including joining cleats/aluminium beading for fixing incl hinges etc. complete all as specified and as directed by Engineer-in-Charge.
Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 1.30 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and as directed by Engineer-in-Charge. Note:- (i) Aluminium chowkhat /frame, glass,wiremess and aluminium grill shall be measured and paid separately.
Supply and fixing 4.8 mm thick sheet glass ordinary quality and glazing fixing with rubber beads with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers in windows/ventilators in square n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 4.0 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane fixed to aluminium ventilator complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing stainless steel Wire cloth galvanised mild steel, 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed by Engineer-in-Charge.
Material and labour Painting to new wooden or wood based surfaces of any description, over 10cm width or girth in two coats with synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour Painting to new steel surfaces of any description, over 10cm width or girth two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfacescomplete all as specified and as directed by Engineer-in-Charge.
Material and labou for preparation of old treated steel surfaces of any description, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Aluminium Anodised handles 150 mm long fixed to doors/windows complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Aluminium Anodised tower bolts 200 mm long fixed to doors/windows complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Aluminium Anodised butt hinges, 125 mm long, fixed with galvanised mild steel hinge pin complete all as specified.
Supply and fixing Aluminium Anodised Sliding door bolt, 250 mm long with bright bolt not less than 12mm dia with & including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate fixed with galvanised mild steel hinge pin complete all as specified.
Supply and fixing pre-laminated particle board, 18/19mm thick interior grade, having one side decorative lamination (approved shade) and other side balancing white lamination fixed in pelmet boxes, shelves , rebated or flat edges including 6 mm thick teak wood leaping all-round and continuous piano hinges, fixed as in repairs complete all as specified including dismantling of boarding any description, fixed in any position with nails complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Continous (piano) hinges of mild steel bright finish or electro galvanised with flap (when open) 30mm,fixed with steel screw complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair Water storage tanks 500 liters capacity rotational moulded, triple layer polythene (cyindrical vertical with closed top) hoisting and fixed in position on roofs including dismantling existing water storage tank complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Ball valve of PVC, 20mm bore, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing CI Gate valve, 20mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union fixed in repairscomplete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 16 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed complete to walls and ceilings or laid in floors including fitting like elbow, reducer, tee, union, nipple etc incl taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and as directed by Engineer-in-Charge.
All as per item above 48 herein before but 20 mm bore tubing.
Supply and fixing in repair Stop valve fancy type, cast copper alloy chromium plated, 15mm bore, screwed down, high pressure with crutch or butter fly handle complete all as specified and as directed by Engineer-in-Charge.
Ditto as above item 50 but fancy type, chromium plated with long shank and cup (concelled type).
Supply and fixing in repair Bib tap fancy type, cast copper alloy chromium plated, 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-Charge.
Supply & Fix in repairs Squatting pan orrissa pattern vitreous china white of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore sand cast cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Low level flushing cistern, PVC (white), 10 liters capacity, with inlet ball float valve, PVC flush pipe and necessary fixing accessories and connecting to water pipe and EWC etc and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PVC connection 15 mm size PTMT nuts of length 450 mm fixed complete all as specified and as directed by Engineer-in-Charge..
Supply and fixing in repair PVC waste pipe of 32 mm dia for Wash Hand basin/Urinals/Sink etc complete complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Swivel shower of CP brass of size 100 x 100 mm any colour for fixing with 15mm pipe (Minimum weight 40 gms) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Shelf of PTMT fixed with & including CP brass screws & wooden/Plastic cleats (min. weight 300 gms) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing tubular towel rail, 20mm dia of 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing stainless steel sinks 1 mm thick kitchen or laboratory with plugs, washers, CP coupling and including bedding in cement mortar fixed in RCC cooking platform including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420mm & bowl size 410mm x 330mm x 160mm, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches including dismantling CI pipe/any type alongwith fittings of 75 mm dia, below or above ground level, jointed in cement mortar and taking out complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches including dismantling CI pipe/any type alongwith fittings of 100 mm dia, below or above ground level, jointed in cement mortar and taking out complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PVC (SWR) bend (any radius), 110mm bore, diminishing pieces or tapers (larger bore measured) jointed in cement mortar complete all as specified and as directed by Engineer-in-Charge.
All as per item 64 above here-in-before but 75mm bore.
Supply and fixing PVC (SWR), floor trap, 75mm bore, Plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PVC (SWR) junction single, (single T) or double, (double T) equal or unequal 110 mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PVC rain water pipes 110mm bore including fixing to walls with MS clamps including dismantling pipe any type alongwith fittings of 100 mm dia, below or above ground level, jointed in cement mortar and taking out complete all as specified and as directed by Engineer-in-Charge.
Dismantling brick tiles laid in single layer jointed & pointed in cement mortar complete all as specified and as directed by Engineer-in-Charge.
Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and as directed by Engineer-in-Charge.
Material and labour 10mm plaster in CM(1:4) finished even and smooth with using extra cement on bottom layer of batten roof with water proofing compound (in case of re placement of bottom layer tile) complete all as specified and as directed by Engineer-in-Charge..(WPC shall be measured separately)
Supply only integral water proofing compound complete all as specified and as directed by Engineer-in-Charge.
Material and labour for tack coat of industrial bitumen 85/25 @ 1.50 Kilogram per square metre over a coat of bitumen primer @ 0.30 litre per square metre including preparation of roof surfaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour 150 mic popy film including preparation of roof surfaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Mud phuska, 80mm thick average, consolidated thickness, on flat roofs including 25 mm thick mud plaster complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Brick tiles 40mm thick laid on mud mortar (mud phuska) and joints grouted flush in cement mortar (1:3) mixed with 5% of cruide oil by weight of cement and pointed flush including leaping plaster complete all as specified and as directed by Engineer-in-Charge.
.-ditto- all as per item No-76 above but except brick tiles complete all as specified and as directed by Engineer-in-Charge.
Demolition of brick work built in cement mortar of any specification and in any position complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and as directed by Engineer-in-Charge.
Material and labour All as per item 79 above here-in-before but using old bricks retrieved from demolition under item above here-in-before including cleaning and removal of mortar from old bricks complete all as specified and as directed by Engineer-in-Charge.
Material and labour Brick work in cement mortar 1:4 using sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls complete all as specified and as directed by Engineer-in-Charge.
Demolition of reinforced cement concrete in any position not described else where complete all as specified.
Cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in benching, kerbs, mud stop, rounded or chamfered on edges including form work complete all as specified and as directed by Engineer-in-Charge.
Material and labour for laying APP based polymeric membrane 3mm thick with minimum weight not less than 3 kg/sqm, reinforced with non woven polyster fabric (wt not less than 160 gms/sqm) torching Joints/overlaps with a propane or a butane gas torch,laid with a minimum overlap of 150mm with thermo fusable finish laid/bonded over a coat of hot blown bitumen 85/[email protected]/sqm,over forced application bitumen primer @0.30 litres per sqm,including preparation of plastered surfaces of Sunken portion ,complete all as specified and as directed by Engineer-in-Charge.
Material and labour rendering 10mm plaster in CM(1:3) finished even and smooth with using extra cement on vertical surface of sunken portion wall and floor with water proofing compound (in case of re placement of bottom layer tile) complete all as specified and as directed by Engineer-in-Charge.(WPC shall be measured separately).
Supply and fixing GI pipe 40 mm bore medium grade including fixing to walls as in spouts of sunken portion complete all as specified and as directed by Engineer-in-Charge.
Material and labour Cement concrete (1:5:10),type E-2 using 40mm graded stone aggregate in foundation filling or above floor and mass concrete complete all as specified and as directed by Engineer-in-Charge
Material and labour for PCC (1:3:6) type C2 (20mm graded stone aggregate) 50mm thick as in plinth protection complete all as specified and as directed by Engineer-in-Charge.
Material and labour for formwork to chullah, hooks, chajjas, troughs and similar work including edges complete all as specified and as directed by Engineer-in-Charge.
Material and labour for reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in chajja, supported on walls, beams, roofs, landing, bolconies, canopies and in shelves and like complete all as specified and as directed by Engineer-in-Charge.
Material and labour for applying bond coat of epoxy bonding agent & cement in 1:1 ratio for bonding old and new concrete on damaged surfaces applying polymer modified mortar in CM 1:3 including mixing of polymer latex additives upto 60mm thickness (Chajjas fins, border etc) (i) Qty of ploymer to be used 15% by weight of the cement. (ii) Use of electrical mixer to get the homogeneous dough on bond coat surfaces. (iii) To achieve required thickness repear this step after 24 hrs as required.(iv) Keep the surfaces moist using water forg for 5 to 7 days etc complete all as specified and as directed. (v) Rate shall be inclusive of all necessary scaffolding for building height up to 24 meters complete all as specified and as directed by Engineer-in-Charge.
Material and labour for mild steel 10 mm dia and over TMT bars as in reinforcement cut to length bend to shape required including cranking, hooking at ends and binding with mild steel wire, (anneled) not less than 0.5 mm dia complete all as specified and as directed by Engineer-in-Charge.
Material and labour for mild steel 08 mm dia and over TMT bars as in reinforcement cut to length bend to shape required including cranking, hooking at ends and binding with mild steel wire, (anneled) not less than 0.5 mm dia complete all as specified and as directed by Engineer-in-Charge.
Material and labour for factory made 60mm thick pre-cast coloured interlocking tiles PCC (M-35 Nominal Mix) over 25mm thick layer fine sand and grouted with dry sand over and including 75mm thick brick hard core complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making good joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opeing opening wherever required complete @ with two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge.
Material and labour for repairing the edges of concrete chajjas, facias, column & the like by providing PCC (1:2:4) type B-0 including all necessary formwork and/ or provision of rendering 15 mm thick (average thickness) in cement mortar (1:3) with chiken wire mesh, after applying a coat of cement slurry @ 3 Kg/Sqm of surface finished even and fair, surface area not execeeding 600 mm wide, in patches including taking down swoolen/damaged plaster or concrete complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Stainless steel plate rack of standard pattern & of size 900 x 750 x 250 mm.The thickness of stainless steel sheet shall be 1.00 mm & grade of sheet shall be 304 AISI including fixing to wall with 4 Nos 50mm screws & PVC rawl plugs complete all as specified and directed.
Supply and fixing Mild steel curtain rod CP powder coated with fixing side brackets, end cups, pinion, rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140 mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre , BEE 5 star rated complete with all accessories such as safety valve,thermostate,NRV, connection piece etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing galvanised iron steel tubing medium grade of size 20 mm complete with all fittings such as bend,tee,reducer,elbow and union of required size including fasteners,bolts,washers and making good the disturbed surfaces to match with the existing surface complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing galvanised iron steel tubing medium grade of size 15 mm complete with all fittings such as bend,tee,reducer,elbow and union of required size including fasteners,bolts,washers and making good the disturbed surfaces to match with the existing surface complete all as specified and as directed by Engineer-in-Charge.
Taking down carefully existig copper / alumn point wiring for light / fan / bell / socket 5/15 Amp points complete with fitting and fixtures such as switches, sockets, c/ rosess, holders and bracket fittings with battens / conduits / wires,T/L fittings and making good the disturbed surfaces of walls and roofs etc.and to match with existing colour complete all as specified and as directed by Engineer-in-Charge.
Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB's (single phase or three phase) of any capacity complete all as specified and as directed by Engineer-in-Charge.
Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly complete all as specified for one light/fan/bell/Bldg security light point controlled by one single pole one way switch.
All as per Item No 106 above but one 3 pin 5 Amp socket outlet point controlled by one switch on Independent board.
All as per Item No 106 above but one 3 pin 5 Amp socket outlet point controlled by one switch on same board.
All as per item No 106 above but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated,stranded,unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed,stranded copper conductor cable.
All as per item No 106 above but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 4.0 Sqmm PVC insulated,stranded,unsheated copper conductor on independednt board with continuous earth wire of size 4.0 Sqmm green colours PVC insulated, unsheathed,stranded copper conductor cable.
Supply and fixing 6 amps, single pole, one way switch urea back piece (IP20), 240V, 50Hz, white in colour, duly ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing switch piano flush type 20 amps, single pole one way, white in colour, duly ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 6 Amps Socket 2 in 1, Urea backpiece (IP20), white in colour, duly ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing socket outlet, UNI, 2 in one 10 Amps & 20 Amps, white in colour, duly ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing bell push flush, type 6 amp single pole one way, white in colour, duly ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing door bell, AC, 230 volts, single pole, white in colour, duly ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 teRMinals duly ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing batten holder (with metal ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing rotary stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, deluxe, white in colour, duly ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing LED light fitting 1 x 20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing LED bulb of 9/10 watts B-22 CDL 3 star 6500K, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing factory made three phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 4 way, dust and veRMin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail suitable for use on 240/415V, 50Hz supply, VTPN DB, partly immersed in wall, including of MCCB 4 pole adjustable theRMal & fixed magnetic type 100 Amps, 50Hz, 415 Volts with rupturing capacity 16 KA and making good distrubbed surfaces with matching colour, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 8 way, dust and veRMin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing MCB SPN, 40A - 63Amps, 240 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Sub main wiring with two single core 2x6 sqmm FRLS insulated and unsheathed stranded copper conductor alongwith earth wire 6.0 sqmm drawn in FRLS rigid conduit connected to main board complete all as specified and directed (Two runs cable and one number earth wire and suitable FRLS conduit shall measured together as unit length) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified and as directed by Engineer-in-Charge.
Cutting holes making good the distributed surface, grouting nuts for fixing of Exhaust fans complete all as specified and as directed by Engineer-in-Charge.
Material and labour for disconnecting electric meter of any cap and refixing same after rewiring, in meter box including connection complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing sheet metal Meter Box single door minimum size 35x50x25cm for electric meter Factory made of MS sheets/CRCA sheet duly painted with powder paint and door hinged locking arrangement confoRMing to IS 5039 of 1983. The electric meter/switch box shall be suitable for fixing one number of electric meter and knock out holes for incoming and outgoing cable. Before the powder paint process the sheet steel shall go through the anti corrosion conditioning process in not less than seven tank process. Concealed in wall, including making good distrurbed surfaces with matching colour, complete all as specified and as directed by Engineer-in-Charge.
Fixing or hanging only ceiling fans height upto 3mtr to 5 mtrs ceiling height of bldg including three core FR PVC Insulated & overall round sheathed flexible with PVC, colour of cores are Red, Black & Yellow/ Green is for earthing. Sheath colour is Black of cable size 23/0.0076 complete all as specified and as directed by Engineer-in-Charge. Note : Ceiling fans obtained/ taking down from item Sr No 123 above.
Supply and fixing earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron or steel wire complete all as specified and as directed by Engineer-in-Charge
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including theRMal management in multiple optics complete with IP 65/ 66 protection complete all as specified and as directed by Engineer-in-Charge. .
Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to sxposed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009).
M/s Surjit Singh and bros
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .