GE(S)/M-58/2021-22

Amount

M&L for cement concrete (1:3:6) type C2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in copings, benching and similar works, finished even and smooth including necessary form work complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in kerbs of interlocking paver blocks complete all as specified and directed.

M&L for RCC M-25 (using 20 mm graded crushed stone aggregate) columns, pillars, piers, posts and struts, including demolition of existing (reinforced) cement concrete of any description and in any position not otherwise specifically provided for including removal of debries from the site n. exc. 50m from starting point etc complete all as specified and directed. Note:- Reinforcement cut as required to facilitate demolition).

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed. (Inner girth shall measured only for payment purpose)

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 Mtr mean radius, built in CM 1:6, including demolition of existing brick masonry built in any mortar complete all as specified and directed.

Description all as per Srl item No. 6.00 above but Except bricks complete all as specified and directed.

M&L for form work to sides of square, rectangular or polygonal, rough finished surfaces of concrete of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Description all as per srl item No 09.00 here-in-before but 6 to 8mm dia, bars complete all as specified and directed.

M&L for mild steel screw bolts 5mm to 10mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

M&L for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only chain link MS galvanisd medium coated as per IS 4826 fencing 75mmx75mm mesh and 3mm dia of wire, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type and standards, rails, straining bolts etc, including provision of binding wire, complete all as specified and directed.

S&F of Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

S&F "as in repair" for concentina punch type wire 610mm dia of each coil avg. weight n. less than 1.06 Kg/RM after streching including coating of anti rust compound fixed on angle iron brackets top of compound wall including taking out existing concentina coil complete all as specified and directed.

Labour only for taking down and refixing/restraining resecuring including making good concentina punch type wire (any dia) fixed on angle iron brackets top of compoun wall complete all as specified and directed.

Labour only for restraining resecuring including making good staples etc. to existing galvanised 2 strand steel barbed wire complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in sub base of floor, including demolition of existing PCC and paving n. exc. 15cm thick in floors and similar works complete all as specified and directed by Engineer-in-Charge.

M&L for 60mm thickness, M-35 Grade coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block built with grey cement of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006, laid dry over and including 50mm thick sand filling under paver, properly levelled etc, including taking out existing interlocking paver block complete all as specified and directed.

Description all as per srl item No 20.00 here-in-before but (EXCEPT INTERLOCKING PAVER BLOCKS) complete all as specified and directed.

M&L for 80mm thickness, M-40 Grade coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block built with grey cement of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006, laid dry over and including 50mm thick sand filling under paver, properly levelled etc, including taking out existing interlocking paver block complete all as specified and directed.

Description all as per srl item No 22.00 here-in-before but (EXCEPT INTERLOCKING PAVER BLOCKS) complete all as specified and directed.

M&L for 10mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement including taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 10mm thick rendering on faces of brick work or concrete surfaces in patches in cement mortar 1:4, finished even and smooth without using extra cement including taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 15mm thick rendering in two layers (base layer 10mm thick in CM 1:6 and finishing layer 5mm thick in CM 1:4) including and mixing of liquid water proofing compound @ 0.200 ltr per 50 kg bag of cement, on brick work or concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of external wall and applying two coats of cement base paint including curing before and after, including a coat of alkali-resistant priming paint complete all as specified and directed.

M&L for preparation of old plastered surfaces making the surface smooth after complete removal of existing treatment of external wall and applying two coats of cement base paint over a coat of alkali-resistant priming paint including curing before and after, complete all as specified and directed.

M&L for preparation of old steel or iron based surfaces of any description not otherwise described exc. 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of newly steel or iron based surfaces of any description not otherwise described exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

Dismantling RCC posts and struts any section including taking out embedded portion in natural ground and making good disturbed surface complete all as specified and directed.

Dismantling RCC posts and struts any section including taking out embedded portion in concrete and making good disturbed surface complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Dismantling of wrough iron or mild steel work of any description complete all as specified and directed.

Surya & Gautam Builders

dadwal engineers

surjit enterprises

M/S CANTILEVER ENGINEERS

M/s Rajeev Vashist

M/S TARSEM CHAND AND SONS

M. C. ENTERPRISES

M/S NARESH KUMAR SHARMA

Bidder Name

jagdish sons

dadwal engineers

surjit enterprises

M/S TARSEM CHAND AND SONS

M/S CANTILEVER ENGINEERS

Surya & Gautam Builders

M/s Rajeev Vashist

M/S NARESH KUMAR SHARMA

M. C. ENTERPRISES