Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹57.9 LAccepted-AOC 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being lowest Tenderer | |
| 2 | L2₹66.6 L+₹8.5 L (14.6%)Rejected-Finance SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | L2 | Rejected-Finance Being other than Lowest Tenderer | |
| 3 | L3₹93.2 L+₹35.1 L (60.4%)Rejected-Finance FLAT NO B 401 4TH FLOOR NAVADURGA CO OP HSG SOCIETY LTD PLOT NO 7 SECTOR 19A NERUR EAST NAVI MUMBAI THANE MAHARASHTRA 400 706 | NAVI MUMBAI | THANE | MAHARASHTRA | 400706 | L3 | Rejected-Finance Being other than Lowest Tenderer | |
| 4 | L4₹1.0 Cr+₹43.3 L (74.6%)Rejected-Finance | L4 | Rejected-Finance Being other than Lowest Tenderer |
Tender Value
₹95 L
EMD Value
₹1.9 L
Closing Date
19 Jun 2023, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Ng Rajesh Singh GE NW KUNJALI
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8958 REPAIR MAINT OF HARD STANDING AND APPLYING EPOXY COATING IN CRUISER WHART JETTY AND ASSOCIATED AREA AT ND MBI
2023_MES_596684_1
8958/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) KUNJALI
ALL AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) KUNJALI
₹1.9 L
Yes
21 Oct 2023
19 May 2023
21 Jun 2023
26 May 2023
19 Jun 2023
31 May 2023
19 May 2023 - 26 May 2023
Amount
Material and labour for preparation of concrete surface grinding by electric grinder,cleanig, brushing and applying epoxy screed of 15 mm thick in single operation in panels comprising of as self leveling compound of composition of BECK BOND DOBECOCKOT 5022, EH460, SILICA POWDER 100 AND FCA 460 in the ratio 100:100:400:10-20 by weight or equivalent in K2P chemical, polus Epothane as approved complete all as specified and directed.
Material and labour for application of one coat of solvent free Epoxy Primer coat on floor using with composition of BECK BOND EP17A. BECK BOND EP 17B in the ratio 100:50 parts by weight. Epoxy primer (or equivalent in K2P chemical, polus epthane as approved) shall be homogeneous mixed, achieved by using a mechanical stirrer machine with agitator blades or alternatively a drill machine with a paddle stirrer. Primer shall be applied at coverage of 3 to 4 sqm per kilograms per coat or epoxy primer all as per manufacturer's instructions and as directed thickness of primer coating shall be as per manufacturer's instructions and as directed.
M&L for applying of finishing coat comprising of BECK BOND SLF36A, BECKBOND SLF 36B, CP360 AND SILICA POWDER 200 in the ratio 100:55:7:210 parts by weight using epoxy colour pigment and Hight Glossy finish over underlaycoat on surfaces of priming coat comprising of BECK BOND DOBECOCKOT 5022, EH460, SILICA POWDER 100 AND FCA 460 in the ratio 100:100:400:10-20 by weight or equivalent in K2P chemical polus Epothane as approved complete all as per manufacturer's instructions and as directed.
M&L for application of one coat of polyurethene based coat on floor using with composition of BECK BOND PU25A and BECK BOND PU25B in the ratio 100:10 parts by weight which shall be homogeneous mixed, achieved by using a mechanical stirrer machine with agitator blades or alternatively a drill machine with a paddle stirrer. Primer shall be applied at coverage of 3 to 4 Sqm per kilograms per coat of polyurathene all as per manufacturer's instructions & as directed thickness of coating shall be as per manufacturer's instructions and as directed. Note :- for Item Nos 01 to 04:- The work shall be carried out by authorised applicator of approved firm only. Regarding sample authorised applicatgor of approved firm only.. Regarding sample approval, bidder shall visit the site of work where sample patch of coating is marked before quoting of tender. The coating chemical shall be approved by GE in consultation with users ie.e (GM) Tech of ASD. Naval Dockyard Mumbai, whose decision shall be final & binding in all respect. Necessary guarantee shall be also submitted by the contractor in writing as specified in PS.
Demolition of reinforced cement concrete of any description and in any position not other wise spcifically provided for.
Precast RCC (1:2:4) type BI using 20mm graded crushed stone aggregate as in cover slabs and set incement mortar 1:4, complete all as specified. (Reinforcement shall be measured and directed by EIC
Demolition of plain cement concrete of any description and in any position not other wise speifically provided for.
Material and labour for ready mix cement concrete in Pavement/Hard standing (PQC) M-40 of flexural strength of 40Kg/Square in field using minimum 500 Kg of cement per cubic metre laid in bays or as directed with and including steel formwork to sides of concrete spread, compacted and finished in a continuous operation etc all as specified and directed.
M&L PCC (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in roof/chajja padding for maintaining roof/chajja slope complete all as specified and as directed.
M&L PCC 1:2:4 type B-0 (using 12.50 mm graded aggregate) cement concrete as a leveling course on roof surfaces and coping complete all as specified and as directed.
Formwork to sides and soffits of floor or roof beams, haunchings, girders, bressummers, lintels cantilevers, shelves including supt-ports, overhangs, etc. Also splays between floors and beams, etc. rough finished surface of concrete.
M&L 10mm dia over mild steel TMT bars, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips etc complete all as specified and directed by Engr-in-charge.
Dismantling wrought or mild steel work of any description.
M&L for Stainless steel decoravtive railings (grade 316), staircase3 (design and pattern as approved made out of SS pipes, SS flats, SS plates etc. Complete with and including necessary welding , buffing/polishing and fixing complete all as specified and directed.
M&L for Stainless steel decoravtive railings chain alloy(grade 316), having 8 mm minimum thickness (design and pattern as approved ) as used to connect two stainless steel post with hooks etc. Complete with and including necessary welding , buffing /polishing and fixing complete all as specified and directed.
Shree Ayyappa Engineering
ROHIT CONSTRUCTION
jalandhara construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .