Establishment of Uttishthati Foundation, i-TBI-DST (NITH) (Civil and Electrical Work).

Distempring with Ist quality acrylic distemper (ready mixed) having VOC cotent less than 50 gms/litre, of approveed manufacturer, of required shade and colour complete, as per manufacturer specification. Old work (two or more coats)over and includding water tinnable priming coat with cement primer.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubularsections/appropriate Z sections and other sections of approved make of JINDAL, HINDALCO. NALCO conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

For fixed portion: Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately), Anodised aluminium

(anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc. complete of SAINT GOBAIN as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

With float plain/frosted glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)

Providing and fixing 4mm thick bakalight tile/sheet in aluminium shutter with aluminium beading and rubber/gasket complete as per direction of Engineer - In - Charge including entire carriage of materials upto all leads, lifts and cost of other incidentals.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and fixing 250 X 16 mm size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screwsetc. complete including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and fixing 125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and fixing 1 50 mm X 10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Electrical Work:-

Providing & fixing LT cable 4Core,XLPE,25Sq.mm (Aluminium conductor) Armoured including laying with earth wire, glad filling in LT panel ,thimble,end termination connection complete in all respect as per specification/ official incharge at site. Make: Havells/KEI/Polycab. i/c entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing & fixing LT cable 4Core,XLPE,10 Sq.mm (Aluminium conductor) Armoured including laying with earth wire, glad filling in LT panel ,thimble,end termination connection complete in all respect as per specification/ official incharge at site. Make: Havells/KEI/Polycab. i.c entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and fixing 4-Pole MCCB 125Amp,36KA rating and breaking capacity FPMCCB in existing cubicle panel as per required at site. Make:L&T ,Legrand /MDS /Havells. i/c entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Supplying and fixing 8- way (4+24) double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator.) Make:-Havells / Legrand / Helonix/L&T. i/c entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make:-Havells / Legrand / Helonix/L&T.i/c entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make:-Havells / Legrand / Helonix/L&T. i/c entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,10KA "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make:-Havells / Legrand / Helonix/L&T. i/c entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Single pole

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular type switch, modular plate , suitable size GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required ..Make:- Havells /Plaza /KEI/helonix.i/c entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit including copper thimble as required at site/ as directed by Engineer in-charge .Make :Havell s/Plaza/KEI/helonix. i/c entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. Make:-Havells / Legrand / Helonix/L&T.i/c entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

1/2 Module (75mmX75mm)

3 Module (100mmX75mm)

6 Module (200mmX75mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Make:-Havells / Legrand / Helonix/L&T. i/c entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

5/6 amps switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Bell push

Call bell/buzzer

Stepped type modular Fan Regulator (2-module)

Providing & fixing 20/22Watt LED round reccessed light with sheet cutting etc. complete in all respect/as directed by Engineer in-charge. Make:-Philips / Hellonix/Jaguar/wipro.i/c entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing & fixing plastic body Size 250mmX250mm exhaust fan complete in all respect/as directed by Engineer in-charge.Make:-Havells/Bajaj/CGL/Usha. i/c entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing & Laying of GI Wire 8SWG ,earth connection thimble with cable. i/c entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Please Enable Macros to View BoQ information