TP1-59/2022-23

Amount

Fabrication, Galvanising and supply of 230KV tower parts as per specification including cost of all materials, labour, lead, lift, etc., complete and as directed by the Department Engineer at site.

Supply of Hot dip galvanised bolts and nuts as per IS conforming to latest issue and as detailed in the specification (Various size)

Supply for transmission line hardwares as per IS conforming to latest issue suitable for ACSR Zebra conductor Single suspension fittings

Supply for transmission line hardwares as per IS conforming to latest issue suitable for ACSR Zebra conductor Single Tension fittings

Supply for transmission line hardwares as per IS conforming to latest issue suitable for ACSR Zebra conductor Mid span comp.joint for ACSR Zebra

Supply for transmission line hardwares as per IS conforming to latest issue suitable for ACSR Zebra conductor Repair sleeve for ACSR Zebra

Fabrication, supply, fixing, painting with one coat red oxide and two coat enamel paint for back ground lettering with enamel paint of approved colour fixing in tower as directed all materials labour lead lift etc., complete. Number Board 200mm x 200

Supplying and fixing of Phase Board of size 200mm dia one set containing 3 nos phase plates with colour sequence

Supply and fixing of Danger Board 1000mm x 500mm

Supply and fixing of Name Board 1500mm x 600mm

Transport of piling and boring equipments such as boring rig, winches, motors, bentonite pump, shells, boiler casing pipe, etc., to location by pulling into river using crane including transport and hire charges etc., complete.

Setting of pilling and boring equipement, tripod with all accessories and tools at each pile location based on the sequence of operation approved by the Engineer incharge at site irrespective of the location and distance of the boring rig for 1000 mm dia pile including mobilisation and demobilisation after comletion of pilling works etc., complete.

Supplying, fabrication of 6mm M.S. sheet for making into circular casing shape to the required dia including welding, placing in position and driving into bore hole including cost of all materilas and MS plate, all labour charges etc., complete. (1000 mm dia Pile)

Boring and concreting of vertical reinforced concrete pile of 1000mm dia. upto required depth from tip of the in all clauses of soil using pile augurs for boring using Bentonite slurry and filling the bore with RCC M20 concrete using 20 mm machine crushed metal and a maximum water cement ratio not exceeding 0.50 with admixtures of CONCARE or equivalant make 1.2 lit. per cum. of concrete, as per specification including cost of all materials, labour, lead, lift etc., complete (But excluding cost of steel reinforcement).

Chipping and dismantling of weak pile concrete from bed level to cutoff level of pile to met sound concrete and clearing the dismantled concrete from pile location including cost of all labour charges etc., complete.

Earth work excavation in hard stiff clay, stiff black cotton hard red eareth, shales, murram, grvel stoney earth, earth mixed witrh small size boulders and hard gravelly soil including bailing or pumping charges if necessary etc. complete.

PCC 1:3:6 using 40 mm HBG metal for base course for Pile cap and tie beam including cost and conveyance of all materials, labour, lead, lift etc., complete.

RCC M20 using 12 to 20 mm HBG metal for pile cap and for Tie beam with steel shuttering and steel form work as per drawing including cost and conveyance of all materials, labour, lead, lft etc., complete but excluding cost of steel reinforcement.

Labour charges for transport of Template including assembling of template, stub and cleat and shifting of template from location to location and reassembling the same including cost of all labour, transport lead, lifts etc., complete as directed by the department engineer at site. (The template will be make own arrangement by the contractor).

Supply, cutting and bending the steel rods of required size and length as per the instruction of Engineer incharge, including tying and placing to the correct alignment and level as per drawing including cost and conveyance of all materials, lead, lift etc., complete.

Transporting of tower parts including sorting out of tower parts at site, erection of tower, tightening of bolts and nuts including cost of all T&P, labour, lead and lift etc., Complete

Welding of exposed bolts and nuts 1 cm each at two places opposite to each other after tightening and punching of tower parts including cost of welding rods all T&P upto bottom cross arm including cost of all materials, labour lead lift etc., complete

Labour charges for Transporting and hoisting of 13 units 90 KN Antifog suspension insulators with suspension fittings including cost of fittings, all materials, labours, lead, and lift, etc., complete.

Labour charges for transporting and hoisting of 14 units 120 KN Antifog tension insulators with tension fittings including cost of fitting and all materials, labours, lead, and lift, etc., complete.

Labour charges for Stringing of 6 Nos of panther conductor including cost of loading and unloading, transporting, sorting out of drums according to drum schedule, providing tressles, paying out, rough sagging, tensioning, clipping, providing SB Dampers and all accessories, including cost of all T&P's, moving the drums to workspot all labour, lead and lift etc., complete, in all respects (Single span)

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)