SPECIAL REPAIR TO 02 X TOILET BLOCKS AT GIRLS AREA AT DGNCC CAMP AND PROVN OF POWER POINT 15 AMP AND MOBILE CHARGING POINT AT ALL FLOOR BOYS BLOCK (02 AT EACH FLOOR) AT DGNCC CAMP UNDER GE (EAST) DELHI CANTT-10

Amount

M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and fair in any position incl scafolding etc, complete all as specified and as directed.

M & L 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and fair in any position incl scafolding etc, complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each and removing to store complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc 4 Sqm each and removing to store complete all as specified and as directed.

S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front (wooden finish pattern) and back Face plain supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S & F 100mm size stainless steel butt hinges fixing with screws to PVC door frame complete all as specified.

S & F Aluminum Anodised 150mm size barrel tower bolt complete all as specified and as directed.

S & F 150mm size aluminum adodised handles complete all as specified and as directed.

S & F 100mm size Mild steel butt hinges fixing with screws to Iron door frame complete all as specified.

S & F Mild steel 150mm size barrel tower bolt complete all as specified and as directed.

S & F 150mm size Mild steel handles complete all as specified and as directed.

M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but n.exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

M & L for glazed ceramic tiles in vertical surface 300x600x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick screed bed in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

M & L 20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like match over and incl 15mm thick rendering in CM 1:4, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and moulding including dismantling of existing granite of any type complete all as specified and as directed .

M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, including demolition of existing Plinth protection (PCC) complete all as specified and as directed.

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of Plain or corrugated AC Sheet, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S & F GI tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.

S & F GI tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.

S & F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and as directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S & F in repair PVC (SWR) Floor/Nahani trap, plain dia of outlet 125mm, with CP grating complete all as specified and as directed.

S & F in repair Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe antisyphonage pipe including trap set in and including concrete etc complete including making good to floor all as specified and dirtected.

S & F in reapir 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket and flush pipe etc complete all as specified and directed

S & F in repair 100mm bore sand Cast, iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to wall or in floors complete all as specified and as directed.

S & F in repairs 100mm bore Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S & F Vitreous china wash basin counter oval type size 600x425x195mm, under granite slab with all fitting and fixture, complete all as specified and as directed.

S & F in repairs Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with swinging spout, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete all as specified and as directed. (Make: Jaquar / Marc/ Kohler)

S & F in repair Angle valve of CP any colour high pressure screwed for iron pipe and fixed, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M & L for Mild steel rolled sections Fe-410-W (Gde-E-250) quality B as in Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc complete all as specified and as directed.

S & F Rotational moulded polyethylene water storage tanks 2000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S & F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 20 mm bore complete all as specified and directed.

S & F framed work such as in door frame, door shuters / gate of angel or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified.

S & F Mild steel, plain, black sheet 1.60mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

Dismantling timber scantlings (Purlins/Rafters) any sec and size, in any position complete all as specified and as directed.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 complete all as specified and as directed.

M & L two coat of synthetic enamel paint over one coat of red oxide primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

S & F 250 mm long aluminium alloy anodised sliding door bolt with haps, stapple ( bolt type ) and fixing clips of sheet, cast of or extruded sections and fixing bolts and sliding bolts of extraded sections or cast aluminium alloy complete all as specified and directed.

M & L 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position including demolition of existing PCC complete all as specified and as directed.

M & L Chequered cement concrete tiles 30cm x 30cm x 20-22mm thick, set, jointed and pointed in neat cement slurry over and including 15mm thick screed bed in CM 1:6 after dismantling of existing chequired tiles complete all as specieied and as directed.

M & L Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-40 Grade with grey cement and pigment laid dry in floor/path after dismantling of existing interlocking tiles complete all as specieied and as directed.

M & L for mild steel TMT bar 10mm dia and over cut to length,bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M & L for form work to soffits of suspended slabs such as roof slabs, floor, slabs landings and stair and similar work not exc. 20 cm thick flat rough to receive plaster all as specified and directed.

M & L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete.

M & L for RCC (1:1.5:3) using 20mm graded agg as in slabs, supported on walls, landings, balconies and in shelves, manhole covers, drain covers and the like including demolition of existing RCC of any type complete all as specified and as directed.

M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm and 1mm thick wall care putty complete all as specified and as directed.

M&L Preparation of newly plastered /unplastered surfaces of walls and ceilings over 1mm thick Birla White/J K White wall care putty, again sand papering thus making surface good and applying Two coats of Oil Bound Distemper on wall surfaces over a coat of interior primer ,complete all as specified and directed.

Eacavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed.

Returing filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed.

Removing excavatged matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed.

Demolition and breaking up drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar for 150mm to 300mm dia pipe, and removal of debris from site and deposited where directed at a distance not exc 1KM from site complete all as specified and as directed.

M & L 200 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with colleres complete laid in trenches and tested complete all as specified and as directed.

M& L PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 200 mm bore incl forming cradles complte all as specified and directed.

M&L for Plain Cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in lintels up to 1.5 metre clear span, bed blocks, copings and the like including weathering, slightly rounded or chamfered angles & throating including provision of necessary formwork, complete including demolition of existing coping all as specified and as directed.

Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches, Sockets, holders, ceiling roses, light fitting regulators etc (to be measured and paid separately under relevent item of this Sch as S&F in repair and credit for these item given in credit schedule here-in-after) and making good the disturbed surface all as directed.

Material and labour of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and fittings such as tees, bends, elbow, and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly including Metal Flush Box, Cover plate with frame, cutting chases and making good disturbed surface in CM 1:3 to match with existing surface for one light point exhaust fan point controlled by one 1-way switch complete all as directed.

All as per item No 61 above but for One socket outlet 3 pin 5/6 Amps on same board controlled by one, one way switch.

S&F in repair ceiling rose surface bakelite 65x50mm Three terminals, 240 V grade complete all as specified and as directed. Make- Anchor

S&F in repair modular switch 6Amps, 1 module complete

S&F in repair modular socket out 6Amps, 2 module complete

S & F in repair surface and wall mounted LED tube light fitting with polycarbonate housing & interated electronic driver with tube rod of 18 Watt. slim elegant design.and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed.

Supply and fix sheet metal enclosure single pole and neutral 8 way double door including taking down old unsv MCB DB any way. Make ABB/ Ledgrand /Schnieder

S&F MCB, 10KA 'B' curve SP of 5 to 32 Amps 240 Volts, capacity in the MCB DB complete with connection testing and commissioning.

Supply and fixing Isolator 40 Amp rating 240V in the MCB DB complete with connection testing and commissioning.

S & F in repair energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed.

Supply and fixing in replacement of street light fitting bracket, 1.0 mtr long bent to shape made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

Earthing complete with galvanised steel plate electrode 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level , connected to and including galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, washers protected by and including 15 mm bore GI Pipe “light grade” and connected to main test point as directed and including concrete pit in PCC(1:3:6) type C1 precast RCC M-25 (design mix) precast cover slab (54 x 54 x 5 cm) duly reinforced with and including 8 mm dia TMT steel bars @ 150 mm C/C both way, one lifting handle made of 8 mm dia TMT bar embedded in precast cover slab, funnel, wire mesh, 20 mm bore GI medium grade pipe for watering, charcoal and salt in alternate layers, including necessary excavation and earth work any type of soil complete all as specified and shown in electrical plate No. 5 of SSR Part –I including testing on completion complete all as specified and directed.

Dismantling, taking down and refixing of exhaust fan any size/capacity all as specified and directed.

Supply and fix in replacement laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 10 sqmm 2 core all as per IS , all as specified & directed.

Supply and fix of light grade Galvanised mild steel pipe 25 mm bore complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps , bolts , nuts and washers complete all as specified and directed as for cable proction . (Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule).

M&L fine sand, filling in trench for cable cushioning and gently punned down by manually with hands complete all as specified and directed. cable cushoining complete

Material and labour Brick protection cover to LT underground cable with Sub Class 'B' over burnt laid dry and flat abutting each other with gaps between adjacent bricks not exceeding 10 mm complete specified and directed

All same as per item No 61 above but on independent board.

S&F Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

S&F Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed.

S&F Modular switch 16 Amp, 1 way, 1 module size with indicator lamp complete all as directed.

S&F Modular socket 16 Amp multipurpose shuttered type, 2 module size with indicator lamp complete all as directed.

S&F modular metal flush box 6 module Complete all as specified and as directed.

Supply and fix modular cover plate with frame 6 module complete

M&L Sub main wiring with 2 run of 4 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to PVC concealed conduit 25 mm dia medium grade with all fittings and including 4 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire including cutting chases and making good in CM 1:3 to match with existing finish and connected with thimble from main DB to sub main DB complete all as directed.

M&L Sub main wiring with 2 run of 6 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to PVC concealed conduit 25 mm dia medium grade with all fittings and including 6 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire including cutting chases and making good in CM 1:3 to match with existing finish and connected with thimble from main DB to sub main DB complete all as directed.

Supply and fix sheet metal enclosure single pole and neutral 8 way double door complete.

Supply and fixing 240V, Isolator SPN 63 Amps in the MCB DB Complete with connection testing and commissioning.

Supply and fixing of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amp, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections complete all as specified and as directed.

M&L MCCB 3 Pole, 200 Amp with breaking capacity 16 KA suitable for 415 volts AC supply, with over load and short circuit protection complete.

M/s Sree Baba Traders (BID ID -3072847)

garnet engineers contractors (BID ID -3077613)

M/s Shubh Enterprises (BID ID -3075213)

tarun construction co (BID ID -3079230)

HANUMAN BUILDERS (BID ID -3077895)

S GOURAV PRAKASH ENTERPRISES (BID ID -3078725)

POONAM ENTERPRISES (BID ID -3077233)