Making and Installation of 02 (Two) nos, of Diamond Crossings in the track line for new panel at Chora 10 Pit Colliery under Kenda Area

Amount

Item Description/ Heading

A. Making of Diamond Crossing for Pit Top & Pit Bottom at Chora 10 Pit Colliery (Surface)

Supply of Oxygen and DA for Cutting rail 6 m long, seal with hammering(Material)

Supply of Oxygen and DA for Cutting rail 6 m long, seal with hammering(Labour)

Supply of Oxygen and DA for Cutting rail and making angle of 1.75 m long rails 2 nos. joining and hammering(Material)

Supply of Oxygen and DA for Cutting rail and making angle of 1.75 m long rails 2 nos. joining and hammering(Labour)

Making Triangular pot by making 2 nos. angle with 1 m long rail(Material)

Making Triangular pot by making 2 nos. angle with 1 m long rail(Labour)

Making Diamond post of the diamond crossing with being & hammering(Material)

Making Diamond post of the diamond crossing with being & hammering(Labour)

Making quadrilateral part (4 Nos.) by 2 Nos. of 2.25 m long rail & 2 Nos. 1.5 m long rail(Material)

Making quadrilateral part (4 Nos.) by 2 Nos. of 2.25 m long rail & 2 Nos. 1.5 m long rail(Labour)

Making 4 Nos. of angle by 3.65 m long rail(Material)

Making 4 Nos. of angle by 3.65 m long rail(Labour)

Making V point 12 Nos. with cutting rail by chesses & hammer after heating(Material)

Making V point 12 Nos. with cutting rail by chesses & hammer after heating(Labour)

Making dugga by 1m long rail (8 Nos.)(Material)

Making dugga by 1m long rail (8 Nos.)(Labour)

Making hole of fitting ‘V’ points duggi (64 Nos.)(Material)

Making hole of fitting ‘V’ points duggi (64 Nos.)(Labour)

Channel carrying 100 mm for fitting the diamond crossing for 6 & 7 Nos. items(Labour)

Making hole for fitting the diamond crossing for 6 & 7 Nos. items(Material)

Making hole for fitting the diamond crossing for 6 & 7 Nos. items(Labour)

Making holes into rail for fitting ‘V’ Point & fish plate (64 Nos.)(Material)

Making holes into rail for fitting ‘V’ Point & fish plate (64 Nos.)(Labour)

Channel & Fish Plate fitting with diamond crossing by fitting Nut & Bolt

B.Fitting of Diamond Crossing at Pit Top at Chora 10 Pit Colliery (Surface)

Dismantling of old diamond crossing by cutting Nut & Bolts, digging, cutting of rails, Channels etc.

Setting & lay cut of new diamond crossing properly at pit bottom

Fixing of Nut bolts welding of all assembled parts repaired into complete channel for completion of Job

Electrodes for welding purposes for making the above job

C.Fitting of Diamond Crossing at Pit Bottom at Chora 10 Pit Colliery (U/G)

Lowering of materials and new diamond crossing from surface to U/G pit bottom

Dismantling and raising of old diamond crossing by cutting Nut & Bolts, digging, cutting of rails, Channels etc.

Setting & lay cut of new diamond crossing properly at pit bottom

Fixing of Nut bolts welding of all assembled parts repaired into complete channel for completion of Job

Electrodes for welding purposes for making the above job

Total impact of GST for the purpose of CTC

OMKAR MISTRY (BID ID -1132042)