8312-REPAIRS/ REPLACEMENT TO JOINERY, PLUMBING, SANITARY FITTINGS, WATER TANKS AND ROOF TREATMENT TO CERTAIN BLDGS AT OUTSIDE OTA UNDER GE STM

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) exc. 1.5 Sqm but n. exc 4 Sqm each including making good disturbed surfaces all as specifid.

Taking down chowkats or frames with shutters (without taking off shutters from frames) n exc. 1.5 Sqm each including making good disturbed surfaces all as specifid.

Taking down shutters of any description n exc 1 Sqm each all as specifid.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each all as specifid.

S&F Solid PVC Frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling &fixing in opening as per spcification &drawing Note:- i)Existing wall edges will have to be finished properly in cement plaster 1:4 . including fixing of 6 Nos wooden plugs for catch door frame size not exc 17Sqcm average sectional areas and 100mm long. ( i)Frame will have to be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS screw, 3 each on either side. (ii)PCC strip of section 5*5mm will have to be created at bottom incl. smooth finish in each door opening.

S&F Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints supplied and fixed.

S&F Factory Made 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F Second class hardwood 35 mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats.

S&F Second class hardwood 35 mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc., without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and supplied and fitted to chowkats.

S&F Second class hardwood 30mm thick glazed and skeleton window/vent shutters, open rebated and prepared to receive glass, gauze etc., without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b) and supplied and fitted to chowkats.

S&F Sheet glass 4mm thick ordinary quality and glazing with 12mm square beading in squares n.exc 0.5 Sq.m in each pane.

S&F MS work as for hold fasts conforming to Fe 290 Gde-E -165

M&L Preparation of surface of steel and iron such as hold fasts of area n.exc 0.10 Sq.m each new or old of any description and girth not otherwise treated with tar or coal tar black paint .

M&L Preparing surfaces of wood and wood based materials new or old of chowkats area tarred exc 0.1 Sqm but n.exc 0.5 Sqm each and treated with tar or coal tar black paint.

S&F Butt hinges 100mm , cold rolled mild steel, medium weight.

All as per item No 16 but fixed in repairs

S&F Butt hinges 100 mm, stainless steel hinges fixed with stainless steel screw with frame

All as per item No 18 but 75 mm size

All as per item No 19 but fixed in repairs

S&F Alumininum anodised barrel tower bolts of extruded section 200 mm size

All as per item No 21 but fixed in repairs

All as per item No 21 but 125 mm size.

All as per item No 23 but fixed in repairs

S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm long

All as per item No 25 but fixed in repairs

All as per item No 25 but 125 mm size.

All as per item No 27 but fixed in repairs

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed.

All as per item No 29 but fixed in repairs

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.5 Sqm.

S&F Sheet glass 5.5 mm thick ordinary quality and glazing with 12 mm square beading in squares exc 0.5 Sq.m in each pane.

S&F 300mm, ordinary mild steel rat tail rod pattern springs including roller and roller plate complete fixed in repairs

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.

S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.

Taking down shutter of any discription n. exc 1 Sqm each and refixing in the same opening with necessary repairs all as specified.

Taking down shutter of any discription exc 1 Sqm and n. exc 2 Sqm each and refixing in the same opening with necessary repairs all as specified.

Dismantling boarding any discription fixed in any position with nails

S&F 19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

Cutting holes in brick walls exc half brick n.exc one brick, built in cement mortar for inserting hold fast and making good dismantled portion in cement concrete 1:2:4 type B-1 as required

S & F 125 mm hasp and staple, safety type,aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws

S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S & F Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing exc 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting, necessary bearing wheels and switch locking arrangement complete all as specified.

S & F 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminum sections as in partition and doors.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S&F in repairs aluminum extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in widthand of weight between 61 to 80 kg.

S & F in repairs mortice lock vertical type size 100 mm brass all as specified

Dismantling structural steel work including doors, gates but excluding framed truss etc.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe- 290 (Gde E- 165)

S&F mild steel black plain sheet 1.25 mm thick but in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc.

Preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

M&L plain fillets square rectangular or traingular in section clean sawn secured with nails or brads 2 nd class hard wood sectional area exc 3 and n exc 6 sqm

S & F in repairs gate and shutter, hooks and eyes 125mm, Aluminium plate type - II,

S&F Boarding, 20 mm thick II nd class hard wood ,supplied & fixed with nails in any situation (except flooring and skirting) with butt joints as in cup board shelves

Supply and Fixing of vertical blinds as in curtains of windows and doors, including alumiunium track boxes and necessary fittings all as specified and directed.

Taking down steel tubing and connections including cleaning for refixing or removal to store in 15mm dia tubes.

Taking down steel tubing and connections including cleaning for refixing or removal to store in 20mm dia tubes.

M & L 15 mm dia tubes, 'medium' grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors in repairs,

M & L 20 mm dia tubes, 'medium' grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors in repairs,

S & F in repairs rotationals moulded polythylene water storage tanks of capacty 1000 litres (cylindrical, vertical with closed top) hoisted and fixed in position including taking down all as specified

S & F in repairs rotationals moulded polythylene water storage tanks of capacty 500 litres (cylindrical, vertical with closed top) hoisted and fixed in position including taking downall as specified

Ball valves 25 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe.

S&F in repairs gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25mm bore and fixed all as specified.

S&F in repairs Vitreous china wash basin, white, flat back, size 550x400 mm incl. brackets

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white with plastic water closet seat, white, closed pattern with bottom, and cover and MS CP or aluminium hinging device,

S & F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement;

S&F in repairs PVC, syphonic action type, flushing cistern, low level, white, 10 lirs, with inlet ball valve, float, handle and flush pipe incl. brackets

S&F in repairs CP shower rose with or without swivel joints 125 mm size

S&F in repairs Angle valves, cast copper alloy, screwed down, high pressure and fly nuts, screwed for iron pipe 15 mm bore all as specified. (Make: Seiko / Water man)

S&F in repairs Stop cock (concealed type) cast copper alloy , Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, 15 mm bore.

Supply and fix chromium plated cascade health faucet with minimum 1200mm long pipe of fancy type all as specified.

S&F in repairs Bib taps 15mm bore cast copper alloy with crutch or butter fly handle chromium plated screwed down for iron pipe or for brass ferrule fixed.

S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device.

S&F in repairs Pillar taps CP cast copper alloy fancy type with capstan heads, chromium plated, screwed down, high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore.

S & F in repairs PVC connection 15 mm size 450 mm long with brass nuts on either sides

S & F Bath rooom PVC cabinet mirror of size 350mm x 450mm (Make : prayag Cat part No 551 or equivalent)

S&F 25mm dia stainless steel decorative fancy type curtain rods in repairs including brackets all as directed

S & F stainless steel decorative fancy type end knob for 25mm curtain rods in repairs all as directed

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings.

S & F prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F steel work in trusses,purlins,distance pieces including special shaped washer etc complete using ERW or induction butt welded tube confirming to I S 1161- 1979 GRADE S-240.

S&F 4.0mm thick figured glass, pin head type and glazing with oil putty in sqaure n exc 0.5Sqm in each pane and fixed to aluminum frames using rubber packing including hacking out old broken glass all as specified

S & F in repairs 150mm Double action spring hinges for door shutters , mild steel with steel wire spring, stove enamelled, black

Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 25 mm thick including 15 mm thick in CM 1:6

Removing the existing roof treatment of any description completely and remove all the debris from site and rubbish off the premises complete all as directed.

Material & labour for water proofing treatment with APP modified prefabricated five layer water proofing membrane, not less than 3mm thick and weighing not less than 3.00 Kg/Sqm reinforced with non woven polyester matt black finished over compatiable primer at 0.3 litre/Sqm, touching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions and finally finished with a coat of bit mastic aluminium paint over the membrane. The over lap joint shall be provided of 75mm in longitudinal direction and 100mm in tranverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage. Manufactures : IWL India Ltd/SAPL (ARGO-P) Hydrotech Ltd (Hydroflame)/STP. Note : The work shall be carried out be authorised applicators of manufactures

Providing and injecting chemical emulsion Chlorophyriphos 20% EC for post construction anti termite treatment at points of contacts of wood works ie, door/wooden windows/wooden cupboards with masonry using chemical emulsion @ 0.5 ltrs per hole by drilling holes of 6mm dia at downward Angle of 45 degree at 150 c/c, and plugging with CM 1:2 mixed with colour pigment to match existing surfaces and making good all as specified and as directed.

G HARI ELECTRICALS

M/S MICROAPPS SOFTWARE PRIVATE LIMITED