Providing and laying 25,50,80,100 mm Dia pipe line at Sangampada, Kasarali, Kombadpada, and Varchapada in ward no 01

providing and laying 25mm 50mm 8mm100 mm ‍dia pipe line at sangampada kasarali kombadpada varchapada in ward no 01

Item No. 01 Excavation for foundation/pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete (Bd-A-1/259)

Item No. 02 Excavation for foundation/pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below. stacking and spreading as directed by Engineer-in-charge, normal dewatering preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-2/259)

Item No. 03 Excavation for foundation/pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering preparing the bed for foundation and excluding backfilling, etc complete (Bd-A-4/250)

Item No. 04 Providing and fixing on walls/ ceiling/ floors, following dia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.01, 6.33 & 10.15 Kilogram/meter with necessary fittings. and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.complete.

Item No. 05 Providing and fixing on walls/ ceiling/ floors, following dia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.01, 6.33 & 10.15 Kilogram/meter with necessary fittings. and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.complete.

Item No. 06 Providing and fixing on walls/ ceiling/ floors, following dia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.01, 6.33 & 10.15 Kilogram/meter with necessary fittings. and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.complete.

Item No. 07 Providing and fixing on walls/ ceiling/ floors, following dia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.01, 6.33 & 10.15 Kilogram/meter with necessary fittings. and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.complete.

Item no. 08 Providing double flange sluice valve confirming for IS-14845 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete

Item no. 09 Providing double flange sluice valve confirming for IS-14845 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete

Item no. 10 Providing double flange sluice valve confirming for IS-14845 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete

Item No. 11:- Lowering, laying and jointing in position following C.ID/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc complete

Item No.12:- Lowering, laying and jointing in position following C.ID/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc complete

Item No. 13:- Lowering, laying and jointing in position following C.ID/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc complete

Item no. 14 Supply of C. I. Mechanical Compression Collar Coupling suitable for C. I. Spun Pipes ( as per - IS - 1536 /2001) and complete with sealing rubber gasket of SBR,.C.I. follower Glands and M.S. nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993.

Item no. 15 Supply of C. I. Mechanical Compression Collar Coupling suitable for C. I. Spun Pipes ( as per - IS - 1536 /2001) and complete with sealing rubber gasket of SBR,.C.I. follower Glands and M.S. nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993.

Item No. 16 Supply of C. I. Mechanical Compression Flanged / Socket Tailpiece (Popularly known as I TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of C. I. Spun Pipes ( as per - IS - 1536 /2001) and D. I. Pipes ( as per IS: 8329 / 2000).The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R, C.I. Follower Glands and M.S. Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. The rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding GST levied by Gol and GoM in all respect, etc. complete as directed

Item No. 17 Supply of C. I. Mechanical Compression Flanged / Socket Tailpiece (Popularly known as I TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of C. I. Spun Pipes ( as per - IS - 1536 /2001) and D. I. Pipes ( as per IS: 8329 / 2000).The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R, C.I. Follower Glands and M.S. Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. The rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding GST levied by Gol and GoM in all respect, etc. complete as directed

Item No. 18 Supply of C. I. Mechanical Joint Double Socket 90º (11/4’’) Bends as dimensionally described in Table-14 of IS-13382/ 1992 complete with sealing rubber gasket of SBR (dimensionally described in IS-12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes.

Item No. 19 Supply of C. I. Mechanical Joint Double Socket 90º (11/4’’) Bends as dimensionally described in Table-14 of IS-13382/ 1992 complete with sealing rubber gasket of SBR (dimensionally described in IS-12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes.

Item No. 20 Supply of CI Mechanical joint Double Socket 45º (11/8’’) Bends as dimensionally described in Table -15 of IS - 13382/ 1992 complete with sealing rubber gasket of S.B.R. (dimensionally described in IS-12820/1989) with cast iron follower gland mild steel nut bolts coated or otherwise protected from rusting and suitable for

Item No. 21 Supply of CI Mechanical joint Double Socket 45º (11/8’’) Bends as dimensionally described in Table -15 of IS - 13382/ 1992 complete with sealing rubber gasket of S.B.R. (dimensionally described in IS-12820/1989) with cast iron follower gland mild steel nut bolts coated or otherwise protected from rusting and suitable for

Item No. 22 Supply of CI Mechanical joint All Socket Tees as dimensionally described in Table -18 of IS - 13382/1992 complete with sealing rubber gasket of S.B.R. (dimensionally described in IS- 12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes.

Item No. 23 Supply of CI Mechanical joint All Socket Tees as dimensionally described in Table -18 of IS - 13382/1992 complete with sealing rubber gasket of S.B.R. (dimensionally described in IS- 12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes.

Item no. 24 - Making cross connection to existing distribution main of any type including excavation, breaking and removing existing pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-in-charge for following diameters of existing pipeline, irrespective of diameter of branch line. (The number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials

Item No. 25 :- Providing and laying in situ Cement Concrete M-15 of trap/ granite/quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete.

Item No.26:- Dewatering the excavated trenches and pools of water in the building trenches/pipeline trenches, well works by using pumps & other devices incluiding disposing off water to safe distance as directed by Engineer-in-charge (including cost ofmachinery, labour,fuel etc. complete

Item No.27:- Refilling the trenche with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging,etc.complete.

Item No. 28:- Supplying, erecting & terminating FR XLPE insulated, galvanised steelformed wire armoured (strip) cable 1100 V, 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Item No. 29 :- Supplying & erecting Minimum three & above star rated Centrifugal water pump (Monoblock), 230V, Single phase 50 cycles A.C. supply of 1.5 kW/2 HP with discharge 600/140 Litres per Minute (LPM) for head of 8/22 m & 50 mm suction/ 50 mm delivery pipe on provided C.C. foundation as per specification No. WP-CG

tem No. 30 :- Supplying & erecting minimum three & above star rated Centrifugal water pump (Monoblock), 415 V, three phase 50 cycles A.C. supply of 5.625 KW/7.5 HP with discharge of 780/170 Litres per Minute (LPM) for head of 33/54 m and 80mm suction/ 65mm delivery pipe of size, on

Item No. 31 :- Supplying & erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .

Mild steel Grill ready

Please Enable Macros to View BoQ information