Construction of New Adminstrative Building at Omerga Tq.Omerga Dist.Osmanabad

Amount

PART – A (Work Portion)

(i) Civil Work

ITEM No. 1 :- Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed. By Mechanical Means.

ITEM No. 2 :- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift upto 1.5 metre)

ITEM No. 3 :- Excavation for foundation in hard murum including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift upto 1.50 metre)

ITEM No. 4 :- Excavation for foundation in Hard murum including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift from 1.5 to 3.0 metre )

ITEM No. 5 :- Excavation for foundation in Hard murum and boulders including removing the excavated material with all lifts and leads, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift upto 1.5 metre)

ITEM No. 6 :- Filling in plinth and floors with approved excavated material in 15 centimetre to 20 centimetre layers including watering and compacting etcetera complete. (Material including all lead and lifts)

ITEM No. 7 :- Filling in plinth and floors with contractors material / brought from outside and approved by Engineer in charge in layers of 15 centimetre to 20 centimetre including watering and compaction etcetera complete. (Material including all lead and lifts)

ITEM No. 8 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. (Material including all lead and lifts)

ITEM No. 9 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper. (Material including all lead and lifts)

ITEM No. 10 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. (Material including all lead and lifts)

ITEM No. 11 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 centimetre deep at 15 centimetre c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper. (Material including all lead and lifts)

ITEM No. 12 :- Providing soling using 80 millimetre size trap metal in 15 centimetre layer including filling voids with Crushed sand /grit, ramming, watering etcetera complete. (Material including all lead and lifts)

A) Building Work

B) Shed

ITEM No. 13 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.) (Material including all lead and lifts)

ITEM No. 14 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-15 of trap/ granite / quartzite / gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood / steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etcetera complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.) (Material including all lead and lifts)

ITEM No. 15 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 16 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions etcetera columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

ITEM No. 17 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 18 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying / pumping, compaction and roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 19 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for reinforced cement concrete slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.) (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 20 :- Providing and laying Cast in situ / Ready Mix cement concrete M-30 of trap/ granite/ quartzite / gneiss metal for reinforced cement concrete chajja as per detailed design and drawings including centering, formwork, cover blocks, laying / pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

E) Pumphouse and Watchman Room

ITEM No. 21 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite / quartzite / gneiss metal for reinforced cement concrete canopy as per detailed designs and drawings including centering, formwork, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing etcetera complete (excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.) (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

ITEM No. 22 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete pardi of required thickness including centering, formwork, cover blocks, laying / pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

E) Pumphouse and Watchman Room

ITEM No. 23 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-30 of trap / quartzite / granite / gneiss metal for reinforced cement concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying / pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement, including cover block). (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 24 :- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etcetera as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Material including all lead and lifts) (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 25 :- Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etcetera as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etcetera and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etcetera complete. (Material including all lead and lifts)

A) Building Work

B) Shed

ITEM No. 26 :- Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etcetera as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etcetera complete. (Material including all lead and lifts) (Second Floor)

ITEM No. 27 :- Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etcetera complete. (Material including all lead and lifts)

ITEM No. 28 :- Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

E) Compound wall and Pump house

ITEM No. 29 :- Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 millimetre diameter / two hoop iron strips 25 millimetre X 1.60 millimetre at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 30 :- Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in cement mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with cement mortar 1:3 admixed with approved water proofing compound and finally top finishing with average 20 millimetre thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound marking finished surface with false squares of 300 millimetre X 300 millimetre making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leak-proofness on Court fee stamp paper of Rs. 500/- including ponding test etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) Second Floor

ITEM No. 31 :- Providing water proof bedding for flooring of Bath and WC 25 millimetre thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) Second Floor

ITEM No. 32 :- Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively, VOC less than 10 cc/gm. The coating thickness and the methodology of application shall strctly as per manufacturer's specifitions and as approved by engineer in charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etcetera, washing with water all complete.The contractor shall give guarantee for the performance of SRI and also the durabitity of coating, all complete as per direction of Engineer - in- incharge. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) Second Floor

ITEM No. 33 :- Providing and fixing 20 to 25 millimetre thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 millimetre depth, filling the joints with 6 millimetre size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etcetera complete. (excluding Cement concrete 1:3:6 base concrete ) (Material including all lead and lifts)

ITEM No. 34 :- Providing and fixing 20 to 25 millimetre thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 millimetre between rough shahabad and reinforced cement concrete walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 millimetre and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etcetera complete. (excluding Cement concrete 1:3:6 base concrete) (Material including all lead and lifts)

ITEM No. 35 :- Providing internal cement plaster 12 millimetre thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 36 :- Providing internal cement plaster 20 millimetre thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 37 :- Providing and applying plaster / wall punning with plaster of paris ( with plaster of paris material of Ambuja / Mor Chap or equivalent make ) in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface (excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 38 :- Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 millimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 millimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 39 :- Providing fine cement finish 1.5 millimetre thick over green plaster surface including scaffolding curing etcetera complete. (Material including all lead and lifts)

ITEM No. 40 :- Providing patti / band 75 millimetre wide on plastered surface 12 millimetre to 15 millimetre thick in C.M. 1:3 line and level including neat finishing scaffolding curing etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 41 :- Providing patti/ band 100 millimetre wide on plastered surface 12 millimetre to 15 millimetre thick in C.M. 1:3 line and level including neat finishing scaffolding curing etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 42 :- Providing patti/ band 150 millimetre wide on plastered surface 12 millimetre to 15 millimetre thick in C.M. 1:3 line and level including neat finishing scaffolding curing etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

E) Compound Wall

ITEM No. 43 :- Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of reinforced cement concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete or burnt brick masonry and or tying by binding wire etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 44 :- Providing and applying two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 45 :- Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595 millimetre X 595 millimetre having 15 millimetre thick densified micro look edge and 100% humidity resistance in combustible as per BS 46 part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600 X 600 millimetre made from hot dipped G.I. steel sections ion silhouette profile, rotary stitched double webbed white with 6 millimetre reveal profile (white/black), wherein, main T runner of size 42 millimetre X 14 millimetre between main tee 600 millimetre center to center and secondary cross T of size 33 X 14 X 0.43 millimetre thick of length 600 millimetre long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200 millimetre X 600 millimetre resting on periphery wall Profile wall section 19 millimetre (7+7) x 19 millimeter X 0.40 thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, smoke detectors etcetera, wherever required. Main T runners suspended from ceiling with using G.I. soffit cleats of size 25 X 35 X 1.6 millimetre of required length fixed to the ceiling with 6 millimetre diametre and 50 millimetre long dash fastener, 4 millimetre diametre G.I. adjustable rods with powder-coated / good quality G.I. level adjustment clips of 35 X 35 X 0.8 millimetre spaced at the rate of 1200, center-to-center along main T all complete at all heights as per the specifications, drawings and as per the directions of Engineer-in-charge. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 46 :- Providing groove to required size at specified location as directed by Engineer, at junction of brick masonry wall and reinforced cement concrete beams or column, at junction of composite masonry, including scaffolding, finishing, curing etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 47 :- Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 millimetre to 605 millimetre X 590 millimetre to 605 millimetre of 8 to 10 millimetre thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etcetera complete. a) Flooring (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 48 :- Providing and laying vitrified mirror / glossy finish tiles having size 590 millimetre to 605 millimetre X 590 millimetre to 605 millimetre of 8 to 10 millimetre thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etcetera complete. b) Skirting (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 49 :- Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 millimetre thickness of having a strength of 300 kilogram per Square centimetre of approved quality and shape on a bed of crushed sand of 25 to 30 millimetre thick including skirting joints and cleaning etcetera complete. (Material including all lead and lifts)

ITEM No. 50 :- Providing and laying ceramic tiles having size 30 centimetre x 60 centimetre confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 51 :- Providing and laying Antiskid Ceramic tiles of approved quality of size 30 centimetre x 30 centimetre and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 52 :- Providing and laying machine cut machine Polished Kota stone flooring 25 millimetre to 30 millimetre thick and required width in plain / diamond pattern on bed of 1:6 cement motor including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etcetera complete. (Material including all lead and lifts)

ITEM No. 53 :- Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 millimetre to 30 millimetre thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. (Material including all lead and lifts)

ITEM No. 54 :- Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etcetera complete. For Flooring. (Material including all lead and lifts)

ITEM No. 55 :- Providing and laying in position flooring of telephone black granite stone of approved shade and size 18 millimetre to 20 millimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in cement mortar 1:3 curing and cleaning etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

ITEM No. 56 :- Providing and fixing machine cut machine polished 18 millimetre to 20 millimetre thick telephone black granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 57 :- Providing and laying telephone black granite stone of 18 to 20 millimetre thick for door frame/ dado/ window boxing etcetera on cement mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 58 :- Providing and fixing machine cut mirror polished 18 millimetre to 20 millimetre thick telephone black granite stone partition with rounding the edges etcetera complete Both side polish. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 59 :- Providing and applying 2 coats of 100% Pure acrylic low VOC and APEO & HCHO free water based paint of approved colour that belongs to class 1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of upto 1 millimetre, paint should have an oustanding washability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 60 :- Providing and applying 2 Coats of 100% Pure acrylic water based paint with special heat reflectance property to withstand the harsh climate for period of atleast 10 years of approved make. Paint system should provide durable and long lasting finish with DFT of minimum 90 microns and should protect against concrete carbonation with R value of minimum 600 and equivalent concrete layer thickness value of minimum 150 centimetre, Paint should have breathability property and should be able to cover hairline cracks in the surface upto 0.5 millimetre The paint has to be applied on a coat of high quality acrylic copolymer based alkali resistant primer with excellent penetrating properties including cleaning, with all leads and lifts at all levels etcetera complete, as directed by Engineer in charge. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 61 :- Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300 millimetre X 40 millimetre X 5 millimetre with oil painting, etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 62 :- Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 millimetre thick style top and freze rail 95 X 35 thick with lock and bottam rail 195 X 25 millimetre thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 63 :- Providing and fixing 34 millimetre thick moulded door shutter consisting of solid core single leaf flush door of 30 millimetre thickness lipped with 15 millimetre ( 5 millimetre X 3 ) thick X 30 millimetre width on one style and top rail and 10 millimetre (5 millimetre X 2 ) thick X 30 millimetre width on other style and bottom rails. The inner panels laminated with 2 millimetre thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 design in different plain and /or prelim colours on one side after routing the moulded design on flush doors and 2 millimetre plain and /or pre lam PVC on other side using rubber adhesive on flush door and solvent cement adhesive on the PVC lipping etcetera as per direction of Engineer in charge and manufacturers specification and drawing etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 64 :- Fire Door 45 millimetre 1HR FRL (60/60) 3 Criteria - INTEGRITY / INSULATION/ STABILITY WOODEN DOOR - Fire Door Tested in accordance to IS: 3614 Part 2. Providing 60 minutes Fire rated doors system duly tested for 3 criteria - Integrity, Insulation and Stability Criteria as per the IS: 3614 Part 2 and BS: 476 part 22 at National Test House, Government of India Laborator and/or with Central Building Research Institute, Government of India undertaking with standard heating conditions as specified in IS:3614 Part II 1992 and BS: 476 part 20 & 22 1987 to achieve the required integrity, insulation and stability (i.e. to restrict the heat radiation, temperature rise on the non-fire side to the maximum of 140° C above the ambient temperature on the exposed surface of the shutter. The fire doors are tested with NCBN technology ("Non-Combustible by Nature") with prior approval of concerned Superintending Engineer. a) Door Frame : Supplying frames for Fire resistant door shutters 1st class Malaysian Hardwood Frame densified (810 Kilogram/cum) and pressure treated with fire retardant chemicals in vacuum impregnation vessel under 160 PSI pressure as per IS:401 and kiln seasoned to moisture below 15% as per IS:1141 of section 120 X 60 millimetre spray quoted with 2 coats of intumescent paint of minimum 200 micron, with single row of Brush Type ASTROFLAME intumescent strip of size 10 millimetre x 4 millimetre affixed in the slit of the Frame for fire and smoke sealing, etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 65 :- Fire Door 45 millimetre 1HR FRL (60/60) 3 Criteria - INTEGRITY / INSULATION/ STABILITY WOODEN DOOR - Fire Door Tested in accordance to IS: 3614 Part 2. Providing 60 minutes Fire rated doors system duly tested for 3 criteria - Integrity, Insulation and Stability Criteria as per the IS: 3614 Part 2 and BS: 476 part 22 at National Test House, Government of India Laborator and/or with Central Building Research Institute, Government of India undertaking with standard heating conditions as specified in IS:3614 Part II 1992 and BS: 476 part 20 & 22 1987 to achieve the required integrity, insulation and stability (i.e. to restrict the heat radiation, temperature rise on the non-fire side to the maximum of 140° C above the ambient temperature on the exposed surface of the shutter. The fire doors are tested with NCBN technology ("Non-Combustible by Nature") with prior approval of concerned Superintending Engineer. b) Shutter : Providing of 65 millimetre thick asbestos free composite - 3 criteria - fire, heat and smoke check Accoustic Door Shutter with flame guard of 120 minutes IS3614 part -II comprising of 2 X 9 millimetre Calcium Silicate boards, Chemical treated internal timber with Fire retardant chemicals in pressure impregnation vessels under 160 PSI pressure as per IS:401 and kiln seasoned to moisture below 15% as per IS:1141 frame work of 100 X 32 millimetre with 32 millimetre thick infill of ceramic fiber (density 128 Kilograms / CMT), vermaculite mix faced with 6 millimetre Fire retardant High Density ply, internally lipped with hardwood beading, and pasted in Hydraulic Press under 50 tonnes pressure, spray quoted with 2 coats of In tumescent paint of minimum 200 micron, and with 1 row of Brush- Type Astroflame® intumescent strip (imported) of size 10 millimetre X 4 millimetre concealed for fire and smoke sealing in the grooves in the shutter on all edges except bottom, without any external lipping. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 66 :- Providing and fixing factory-made steel door of Single leaf Internal Plain Steel finish type with a.) Frame of size 100 X 58 millimetre conforming to IS : 4351-2003, 1.2 millimetre thick pre-galvanized sheet with mitred and welded cones, frame stretches, hinge reinforcing plates, fixing plates and hardware mounting plates and Polyurethane foam infill b.) Shutter of thickness 46 millimetre made of 0.8 millimetre thick slip coated pre galvanized steel sheet on both sides conforming to ASTM A527/ASTM A525, BS 2989 1994, IS 277, Zinc coating 120 GSM. Lock formed panels with internal stiffeners of 3 millimetre thick made of galvanized sheet, 3 millimetre thick hinge reinforcing hardware mounting plates and lock protection with Honeycomb craft paper infill of thickness 150 GSM of load bearing capacity 500 Kilogram/ One Square Metre. c.) Finish: Powder coated surface finished with thermosetting polyurethane paint of Aliphatic grade of thickness 60-micron d) Accessories: Min 8 Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hinges of Dorset make, Dorset cylindrical lock, SS Tower bolt of 200 millimetre size, Door stopper complete. (Material including all lead and lifts)

ITEM No. 67 :- Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 X 38 millimetre X 1.22 millimetre box type, 5 millimetre thick sheet glass louvers, of approved quality etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 68 :- Providing and Fixing 30 MILLIMETRE thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 guage thickness and, size 19 X 19 millimetre for styles and 15 X 15 millimetre for the top and bottom rails, M.S. frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 millimetre (+/0.25) thick prelaminated sheet of density 600 kg/cbm, of size 30 millimetre thickness 70 millimetre width out of which 50 millimetre shall be flat and 20 millimetre shall be tapered in 45 angle on either side forming stiles ? and 5 millimetre thick, 95 millimetre wide PVC sheet out of which 75 millimetre shall be falt and 20 millimetre shall be tapered in 45 on the inner side to form top and bottom rail and 115 millimetre wide PVC sheet out of which 75 millimetre shall be falt and 20 millimetre shall be tapered on both sides to form lock rail. Top, bottom and lock rail shall be provided either side of the panel. An additional 5 millimetre (+/0.25) thick PVC strip of 20 millimetre width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 millimetre (+/0.25) thick PVC sheet to be fitted inside the Mild Steel frame welded/ sealed to the styles and rails with 5 millimetre (+/0.25) x 30 millimetre PVC sheet beading on either side and joined together with solvent cement adhesive etcetera, 10 millimetre thickness (5 millimetre (+/0.25) X 2 numbers ) 20 millimetre wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 numbers M.S. powder coated but hinges of size 100 millimetre X 25 Millimetre X 2 millimetre using 32 millimetre long steel screws drilled suitable to pass through both the walls of the M.S. tube, other hardwares should be fixed with 19 X 6 millimetre size steel screws including fixture fasting, complete as per direction of engineer in charge. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 69 :- Providing and fixing in position U.P.V.C. (Unplasticized Poly Vinyl Chloride) having multi- chambered outer-frame section (73 X 50 millimetre) with an outer wall thickness of 2 millimetre and steel reinforcement, multi-chambered slider frame (73 X 60 millimetre) with steel reinforcement, multi- chambered slider sash (46 X 82 millimetre with steel reinforcement designed to give optimum strength, 5 millimetre thick toughened double glass with 12 millimetre spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets, silicon sealent, sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-in-Charge etcetre complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 70 :- Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 X 9 X 3 millimetre minimum size, crossings of Mild Steel flats of size 18 X 5 millimetre T or E section for runner of minimum 40 X 6 millimetre size for flange, M.S. flat for top runner of minimum size 40 X 12 millimetre with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 millimetre max. spacing of vertical channels be 100 millimetre enclosed gate position and clear space of 150 millimetre between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etcetera complete. (I.S. 10521:1983). (Material including all lead and lifts)

ITEM No. 71 :- Providing and fixing mild steel grill work for windows, ventilators, etcetera 15 kilogram per Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 72 :- Providing and fixing aluminium grill (5.13 Kilogram per Square Metre) decorative of various sizes as per detail drawing and specification etcetera complete. (Prior permission to be obtained from S.E. before execution of this item) (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 73 :- Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 millimetre diameter and vertical pipe of 38 millimetre diametre at 0.60 metre centre to centre or as required and horizontal pipes of 25 millimetre diametre in three rows, all pipes of 2 millimetre thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 millimetre diameter above newel post of 75 millimetre diameter etcetera complete (Prior approval of sample and brand by Executive Engineer is necessary before use) (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 74 :- Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets/ union nut etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 75 :- Providing and fixing 25 millimetre diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [Without chamber]. (Material including all lead and lifts)

ITEM No. 76 :- Providing and fixing 15 millimetre diameter screw down bib/ stop tap of brass including necessary socket union nut complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 77 :- Providing and fixing 20 millimetre diameter screw down bib / stop tap of brass including necessary socket union nut complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 78 :- Providing and fixing screw down 15 millimetre diameter wheeled stop tap of brass including necessary sockets/union nut complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 79 :- Providing and fixing push cock (Self closing tap) symet type of 15 millimetre diameter including necessary socket, testing etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 80 :- Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 63 X 45 centimetre size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etcetera complete. (Jaquar or equivalent make confirming to Green Building Certification) (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 81 :- Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 X 590 X 195 millimetre size with pillar cock, C.P. Angular stop cock, long thread of approved make continental including stainless steel bottle trap of necessary pipe connection upto the outside face of the wall, having Telephonic Black / Colour Granite of 180 millimetre thick fixed on Black Kadappa Framework etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 82 :- Providing and fixing 15 centimetre x 10 centimetre salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 83 :- Providing and laying concrete pipes of I.S. NP class of 150millimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. (Material including all lead and lifts)

ITEM No. 84 :- Providing and laying concrete pipes of I.S. NP class of 300 millimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. (Material including all lead and lifts)

ITEM No. 85 :- Providing, constructing and fixing Supreme make or equivalent make Ultra 250 millimetre diameter Inspection chamber made up of UPVC material of thickness 3.5 millimetre and height of 259 millimetre with inlet and outlet of 110 millimetre diameter with 75 millimetre diameter U Trap, Ultra shaft pipe of Upvc material having height of 470 millimetre and fixing Ultra 250 millimetre diameter UPVC cover and frame in 150 millimetre thick in c.c.1:2:4, having crushed sand bed of 100 millimetre thick of size 550 millimetre diameter Including excavation and refilling the sides of chamber by crushed sand cushioning 150 millimetre thickness, connecting all required UPVC fittings with rubber lubricant etcetera complete. (Material including all lead and lifts)

ITEM No. 86 :- Providing, constructing and fixing Supreme make or equivalent make Ultra 450 millimetre diameter Inspection chamber made up of Polypropylene / polyethylene material of thickness 3.5 millimetre and height of 388 millimetre with 160 or 200 millimetre main inlet (s) outlet and 110 and / or 160 millimetre branch inlets, with 450 millimetre diameter Ultra shaft pipe of HDPE material having height of 460 millimetre, having reinforced cement concrete cover and frame fixing in 150 millimetre thick in c.c.1:2:4, having crushed sand bed of 150 millimetre thick of size 750 millimetre diameter Including excavation and refilling the sides of chamber by sand crushed cushioning 150 millimetre thickness, connecting all required UPVC fittings with rubber lubricant etcetera complete. (Material including all lead and lifts)

ITEM No. 87 :- Providing and fixing 450 millimetre X 550 millimetre size superior type Belgium mirror with 16 millimetre diameter nickel plated towel rod etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 88 :- Providing and fixing chromium plated towel rod 16 millimetre diametre and 75 centimetre in length including all accessories complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 89 :- Providing and fixing stainless steel sink of size 600 x 510 x 200 millimetre including coupling, outlet pipe, elbow and other necessary fitting, finishing etcetera complete. (Jaquar or equivalent make confirming to Green Building Certification) (Material including all lead and lifts)

ITEM No. 90 :- Providing and fixing C.P. Angular stop clock with wall flange Jaquar make or equivalent continental (CAT.NO. CON-059) including necessary sockets / union nut etcetera complete.

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 91 :- Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etcetera complete.

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 92 :- Providing and fixing C.P. sink cock with raised J shaped swinging casted spout jaquar or equivalent make continental (CAT.NO. CON -359) including necessary sockets/ union nut etcetera complete. (Material including all lead and lifts)

ITEM No. 93 :- Providing and fixing 40 millimetre diametre Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etcetera complete.

ITEM No. 94 :- Providing and fixing 15 millimetre diametre Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etcetera complete. (Second Floor)

ITEM No. 95 :- Providing and fixing Orissa Pan of size 580 X 445 X 260 millimetre with approved make flush valve including trap, C.I. soil and vent pipe upto outside face of wall including 100 millimetre diametre Cast Iron plug, bend and necessary pipe connection, etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 96 :- Providing and fixing white Opal series European type wall-hung, of size 400 millimetre X 370 millimetre X 575 millimetre with approved make flush valve including soil pipe, vent pipe upto outside face of wall, 100 millimetre diametre Cast Iron plug bend inlet pipe all fittings, cutting and making good walls, floors etcetera as directed by Engineer in charge. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 97 :- Providing and fixing white glazed earthenware lipped flat back/corner type Urinal with PVC 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 millimetre diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall.

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 98 :- Providing and fixing White Glazed Earthenware Squatting plate (Ladies Urinal) with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 millimetre diameter P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall.

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 99 :- Providing and fixing 75 millimetre diametre stabiliser pipe/ poly vinyl chloride soil vent / waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etcetera complete.

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 100 :- Providing and fixing 100 millimetre diametre stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 103 :- Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres. (Material including all lead and lifts) (Second Floor)

ITEM No. 104 :- Providing and fixing on walls/ ceiling/ floor 15 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 105 :- Providing and fixing on walls / ceiling / floor 20 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete, including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 106 :- Providing and fixing on walls / ceiling / floor 25 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete, including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 107 :- Providing and fixing on walls/ ceiling/ floor 32 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 108 :- Providing and fixing on walls /ceiling/ floor 40 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 109 :- Providing and fixing on walls/ ceiling/ floor 50 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 110 :- Providing and fixing 15 centimetre rigid PVC Nahani trap including PVC grating, bend, connecting piece of UPVC pipe up to the outside face of wall, making the good damaged surface and testing etcetera complete. (Prior approval of sample and brand by Executive Engineer is necessary before use) (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 111 :- Providing and fixing Poly Vinyl Chloride Rain water pipes of 110 millimetre outer diameter and having wall thickness of 2.2 to 2.7 millimetre confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, including fixing the pipe on wall using approved wooden cleats projecting 25 millimetre to 40 millimetre from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on Cement concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocations of pipes, all the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etcetera complete. (The contractor shall give 3 years guarantee bond for payment). (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 112 :- Providing and laying in trenches 15 millimetre daimetre CPVC pipe including necessary excavation, fittings, refilling trenches etcetera complete including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

ITEM No. 113 :- Providing and laying in trenches 20 millimetre daimetre CPVC pipe including necessary excavation, fittings. Refilling trenches etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

ITEM No. 114 :- Providing and laying in trenches 25 millimetre daimetre CPVC pipe including necessary excavation, fittings, refilling trenches etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

ITEM No. 115 :- Providing and laying in trenches 32 millimetre daimetre CPVC pipe including necessary excavation, fittings. Refilling trenches etcetera complete, including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

ITEM No. 116 :- Providing and laying in trenches 40 millimetre daimetre CPVC pipe including necessary excavation, fittings. Refilling trenches etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

ITEM No. 117 :- Providing and laying in trenches 50 millimetre daimetre CPVC pipe including necessary excavation, fittings. Refilling trenches etcetera complete, including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts)

ITEM No. 118 :- Providing and fixing in position UPVC ultra violet stabilized 110 millimetre outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 119 :- Providing and fixing Glass self 125 millimetre wide and 600 millimetre long with necessary chromium plated brackets providing Teak wood gutties etcetera complete.

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 120 :- Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets / union nut etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

A) Ground Floor

B) First Floor

C) Second Floor

ITEM No. 121 :- Providing and fixing 90 centimetre x 60 centimetre Granite plate engraving 10 centimetre height letter, figures including painting the letters / figures with approved colour and shade complete. (Material including all lead and lifts)

ITEM No. 122 :- Providing and fixing in position alluminium strips of size 50millimetre X 3millimetre for nosing the steps including fixing with screws and raval plugs, bending and cutting to the required shape and size, finishing with paint, necessary mortar bedding of 1:3 cement mortar to get exact line and level including watering and curing etcetera complete

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 123 :- Providing and fixing lightening conductor system comprising of erecting Air-Termination consisting of tubular copper rod of 25 millimetre diameter 1.2 millimetre thick with multiple points head 1.2 metre long (Heavy Duty) welded or clamped to G.I. pipe pole B grade 50 millimetre diametre of requiired length with Mild steel round bnase plate 25 centimetre diametre and 10 millimetre thick at bottom embeded in cement concrete 1:3:6 foundation of size 45 centimetre diam x 45 centimetre Height and providing earthing with copper earth plate of size 60 x 60 x 0.3 cms with cadmium plated nut bolts to fix earthing strip burried in specially prepared earth pits 1.5 metre below ground level with 40 kilogram charcoal and salt with altemate layers of charcoal and salt and Galvanised Iron pipe 40 millimetre diametre 2 meter length burried in earthe upto earthling plate remining portion above ground level for watering and refilling complete. Note - Copper strip from lightening conductor is not considered in this item. (Material including all lead and lifts)

ITEM No. 124 :- Providing and applying Texture plaster with finishing with Purli / Rustic texture material (with texture material of Asian / Renava / Nitco/Temtex or equivalent company make) in 3 to 4 millimeter thickness on previously finished plastered surface, including Plaster Groove 6millimetre thickness or Tape Grooves 35 to 45 millimetre thickness or as required, in all position including preparing the surface scaffolding etcetera complete. (Material including all lead and lifts)

ITEM No. 125 :- Supply and Installation of translucent roof with DPI Flux standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of minimum of 12 millimetre thick of 900 millimetre (minimum) width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design for higher flexibility & strength. Panels with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 numbers self-drilling screws and trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of minimum 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a minimum of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.6 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap / Aluminium U/F profile/ Glazing Bar for ends as required. Panel shall be fixed over Mild steel structural steel/MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing and direction of the engineering in charge. Colour: As per Approval. Approved Make: FLUX by DPI Daylighting or approved equivalent The 2 millimetre thick panels shall be used for a roofing height of upto 15 meters. (Material including all lead and lifts) (First Floor)

ITEM No. 126 :- Providing soak pit of size 120 centimetre x 120 centimetre x 120 centimetre including excavating and filling with brick-bats. (Material including all lead and lifts)

ITEM No. 127 :- Rain Water Harvesting - Shallow Percolation Pit providing, constructing 2.0 metre deep shallow depth percolation pit comprising of 1.0 metre diametre pre-cast RCC rings, 300 millimetre thick side filling around outside of RCC rings (annular space) with 40 millimetre size boulders including filling of percolation pit upto 0.50 metre depth (from bottom up) with 25-75 millimetre clean washed gravels followed by 0.5 metre depth of 10-25 millimetre of clean washed stones followed by 0.5 metre of washed river fine aggregate (natural sand / crushed sand VSI grade finely washed etcetera ) including netlon mesh between each gravel / fine aggregate (natural sand / crushed sand VSI grade finely washed etcetera) media layer including covering with RCC slab, manhole frame and cover, PVC rungs etcetre including arrangement for inlet and outlet pipe, excavation and backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge. (Material including all lead and lifts)

ITEM No. 128 :- Providing and installing bio digester unit based on DRDO technology made of Fibre Reinforced Plastic (FRP) having composition and following technical specifications and including necessary pipe and accessories up to 3 meter length, excluding the necessary excavation for installing the bio digester. Percentage of fibre glass (glass content in fibre glass should be minimum 30%) :-33.33% Percentage of polyester resin: - 66.67% Water absorption (as per ASTM) :- 0.30% Flammability as per ASTM Tensile strength :-115 MPA Specific Gravity at 25 degree centigrade 1.45 Izod impact strength :- 65KJ/M2 Heat defection / distort temperature:-65 degree C Corrosion resistance (Non Corrosive) fitted with Inlet pipe size rigid PVC :-100 millimetre Outlet pipe size rigid PVC : 80 millimetre Gas outlet rigid PVC with Valve : 20 millimetre Bacteria immobilization PVC mattes (on all partition) With DRDO TOT licensee and latest batch certificate. (Month and year of supply) and capacity as below : (Material including all lead and lifts)

A) Up to 25 user size (1.5 metre X 1.0 metre X 1.0 metre), Capacity of biodgester :-1500 liters, Area of top, bottom and side walls : 8 sq.m, Area of partition walls: 2 square metre, Total weight of FRP : - 82.80 Kilogram, Bacteria inoculums quantity: - 600 liters, Minimum thickness of side walls / top and bottom: 5 millimetre, Number of inside partitions: - 3, Minimum thickness of partition wall : 3 millimetre.

D) Up to 40 user size (1.5 metre X 1.0 metre X 1.0 metre), Capacity of biodgester :-1500 liters, Area of top, bottom and side walls : 8 sq.m, Area of partition walls: 2 square metre, Total weight of FRP : - 82.80 Kilogram, Bacteria inoculums quantity: - 600 liters, Minimum thickness of side walls / top and bottom: 5 millimetre, Number of inside partitions: - 3, Minimum thickness of partition wall : 3 millimetre.

ITEM No. 130 :- Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions etcetera including bailing out water, formwork, laying / pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etcetera complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

ITEM No. 131 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying / pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.) (Material including all lead and lifts)

ITEM No. 132 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying / pumping, compaction and roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

ITEM No. 133 :- Providing and fixing 50 millimetre diameter medium class Galvanised Iron pipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in cement cocnrete block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer etcetera complete.

ITEM No. 134 :- Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader / Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 - By Mix in Place Method and Grading – II Material (Material including all lead and lifts)

ITEM No. 135 :- Supplying hard murum / kankar at the road side, including conveying with all leads and stacking etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

ITEM No. 136 :- Spreading hard murum/ soft murum/ gravel or kankar for side width complete. (Material including all lead and lifts)

ITEM No. 137 :- Compacting the hard murum side widths including laying in layers on each side with Vibratory roller including artificial watering etcetera complete.

ITEM No. 138 :- Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 millimetre, cement content not to be less than 150 kilogram per cubic metre, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor / by suitable means as approved by Engineer-in-charge, compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etcetera complete. (Material including all lead and lifts)

ITEM No. 139 :- Providing and laying in situ cement concrete M-30 with tremix treatment for 200 millimetre thickness for Concrete road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 millimetre wide and 20 millimetre deep with necessary refilling with bitumen (excluding reinforcement) with coarse and fine aggregate (natural / VSI grade finely washed crushed sand) etcetera complete.

ITEM No. 140 :- Providing and fixing in position TMT FE 500, 25 millimetre diametre dowel bars precoated with anticorrosive epoxy paint of required diametre 60 centimetre Long and at 30.00 centimetre Centre to centre and PVC pipe of 32 millimetre diametre wherever directed including handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etcetera complete. (Material including all lead and lifts)

ITEM No. 141 :- Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy paint of 12 millimetre diametre 70 centimetre long and at 30.00 centimetre centre to centre and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of TMT FE 500, chairs with proper alignment etcetera complete. (Material including all lead and lifts)

ITEM No. 142 :- Conveying materials obtained from road cutting including all lifts, laying in layers of 20 centimetre to 30 centimetre breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50 metres to 300 metres inclusive from the site of excavation to the site of deposition as directed. (Material including all lead and lifts)

ITEM No. 143 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete pardi of required thickness including centering, formwork, cover blocks, laying / pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

ITEM No. 144 :- Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 1000 millimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etcetera complete. (Material including all lead and lifts)

ITEM No. 145 :- Providing and fixing colour coated Zincalume (R) AZ150 (minimum 150 grams per Square metre total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 millimetre Base Metal Thickness (BMT) (0.5 millimetre TCT ), Hi-strength steel with minimum 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 millimetre effective cover width and nominal 25-30 millimetre deep ribs with subtle square fluting in the five pan at nominal 180-250 millimetre center-to-center. The end rib shall be designed for anti-capillary groove and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with minimum fastened with minimum 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etcetera complete. (weight of profile 4.52 kilogram per square metre) (Material including all lead and lifts)

ITEM No. 146 :- Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 millimetre thickness of having a strength of 300 kilogram per Square centimetre of approved quality and shape on a bed of crushed sand of 25 to 30 millimetre thick including skirting joints and cleaning etcetera complete. (Material including all lead and lifts)

ITEM No. 147 :- Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite / quartzite / gneiss metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions etcetera including bailing out water, formwork, cover blocks, laying / pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etcetera complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

ITEM No. 148 :- Providing and laying Cast in situ / Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

ITEM No. 149 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying / pumping, compaction and roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

ITEM No. 150 :- Providing and laying Cast in situ / Ready Mix cement concrete M-25 of trap/ granite / quartzite / gneiss metal for reinforced cement concrete slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

ITEM No. 151 :- Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etcetera complete. (Material including all lead and lifts)

ITEM No. 152 :- Providing and applying two coats Apex Ultima Puranature Anti-Pollution or equivalent approved brand, paint should decomposes organic substances and inorganic gases (NOx, VOC’s, CO, SOx, formaldehydes, etcetera) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide and Absorbs CO2 (4.8 kilogram per 15 litres). Plaster crack should be filled by Acrylic base Crack seal / Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty should be given by the Manufaturer the work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. (Material including all lead and lifts)

ITEM No. 153 :- Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 millimetre with lock plate of 3.15 millimetre thickness reinforced with 35 x 35 x 5 millimetre angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 millimetre and 3.15 millimetre respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 millimetre minimum size and shape with square bar, suspension shaft of minimum 32 millimetre diameter, hood cover of M.S. sheet not less than 0.9 millimetre thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etcetera complete. (I.S. 62481979) (With mechanical gear) (Material including all lead and lifts)

ITEM No. 154 :- Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 X 38.10 X 0.90 millimetre at weight 0.637 kilogram per running metre with window frame bottom track section 92 X 31.75 X 1.30 millimetre at weight 1.070 kilogram per running metre top and side track section 92 X 31.75 X 1.30 millimetre at weight 0.933 kilogram per running metre the shutter should be of bearing bottom 40 X 18 X 1.25 millimetre at weight 0.417 kilogram per running metre inter locking section 40 X 18 X 1.10 millimetre at weight 0.469 kilogram per running metre and handle and top section 40 X 18 X 1.25 millimetre at weight 0.417 kilogram per running metre as per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 millimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etcetera complete. With powder coating with box. (Material including all lead and lifts)

ITEM No. 155 :- Boring work (including transport.) 200 / 215 millimetre diameter in the soil / gravel surface Bore diameter of 150 millimetre in solid rock. This includes diameter drilling work. (Wet drilling)

ITEM No. 156 :- Providing after completion of drilling bore well, capacity test by flushing (air lift method) to be measured with 90 degree "V" notch.

ITEM No. 157 :- Provining 180 millimetre diameter PVC Casing pipe (8 kg / cm2) (IS 4985-1988) in exceptional circumstances / Casing pipes with a rock surface and if more than 40 feet of casing pipe is required, the casing should be used with the technical approval of the Deputy Engineer and Geologist.

ITEM No. 158 :- Lowering, gGrounding 180 millimetre diameter PVC Casing pipe (8 Kg / cm2) (IS 4985-1988) Casing

ITEM No. 159 :- Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etcetera complete. (Material including all lead and lifts)

ITEM No. 160 :- Preparing Instant Lawn :- Excavating the ground to a requirsd depth of 20 centimetres, removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil / silt and manure in excavated area in 3:1 proportion to a height of 20 centimetres mixing garden soil and manure thoroughly, well leveling, with required slope, light watering on previous night, rolling on surface, fixing readymade lawn truf, rolls or slabs of required variety as directed, ramming of it for proper fixing and maintaining till well established by watering, weeding, clipping or moving etcetera complete. (Material including all lead and lifts)

ITEM No. 161 :- Preparing Flower Bed : Excavating the ground to a requitred depth of 30 centimetre removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material up to a height of 15cms and remaining fresh garden soil and manure in excavated area in 3:1 proportion to a required height of 30 centimtere mixing garden soil and manure, throughtly well, levelling, watering on previous night, planting seedings of required annuals 25 Cms. a part Maintaining till well established by watering weeding, stirring, prunning, replacing the casualties etcetera complete. (Material including all lead and lifts)

ITEM No. 162 :- Rose Plant :- Excavating pit with size 0.30 x 0.30 x 0.30 metre removing and conveying unwanted stuff to a required distance as directed. Filling the pit with fresh garden soil and manure in 3:1 proportion to a height of 30 centimetre, mixing garden soil and manure, throughtly well, levelling, watering on previous night, planting 40 to 50 centimetres height healthy plants of required rose variety maintaining till well established by watering weeding, stirring, prunning, replacing the casualties etcetera complete. (Material including all lead and lifts)

ITEM No. 163 :- Planting Large Flowering / Shady Trees :- ( Minimum Height to 1 Metre) Digging pit with size 0.9 metre X 0.9 metre X 0.9 metre, removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material up to a height of 0.30 metre and remaining height of 0.60 metre with fresh garden soil and manure in 3:1 proportion. Mixing soil and manure thoroughly well, levelling as directed, watering previous night. Planting one or two years old, minimum 1.0 metre height, healthy tree sapling as per specifications. Maintaining till well established by watering, weedings, stirring of soil, staking replacing, casualaties etcetera complete. (Material including all lead and lifts)

ITEM No. 164 :- Planting Large flowing / shady trees :- (minimum height to 1 metres) - Digging pit with size 0.9 metre X 0.9 metre X 0.9 metre removing and conveying unwanted stuff to a required as distance as directed. Filling the pit with approved exavated material upto hight of 0.3 metre and remaining height of 0.6 metre fresh garden soil and murum in 3:1 preparation. Mixing soil and murum thoroughly well levelling, as directed, watering previous night, planting two to three year old healthy trees sapling as per specification, maintaing till well established by watering, wedding, stirring of soil staking replacing of casualties etcetera complete + Planting Trees on Soft / Hard surface (Individual) : Filling of Red Hill Earth, Cow Dung Manure and good earth from excaveted pit in the excavated pits mixing in 2:1:1 proportion, watering and providing well grown trees with minimum average girth of 2" and minimum height of 10' above finished level after plantation of specified variety, at desired location and at specified distances. Achieving finished grade level. Planting the tree with appropriate anchoring, eveling the top soil surface as specified after plantation, staking to balance the tree. Including transport to the site & planting, preparation of free basin, watering & maintaining for 1 month after completion of plantation and replacement of casualties till 1 month. (Material including all lead and lifts)

ITEM No. 165 :- PLANTING SMALL AND MEDIUM SIZE ORNAMENTAL / FLOWERING PLANT - Digging pit with size 0.6 metre x 0.6 metre x 0.6 metre removing and conveying unwanted stuff to a required distance as directed. Filling the pit with fresh garden soil and farm Yard manure upto a height of 0.60 m with fresh garden soil and manure in 3:1 proportion. Mixing soil and manure thoroughly well, leveling as directed, watering previous night planting one to two year old healthy trees sapling as per specification. Maintaining till well established by watering weeding stirring of soil replacing of casualties etcetera casualties etcetera complete. (Material including all lead and lifts).

ITEM No. 166 :- Providing and Fixing Rollar Blinds AMI Make or approved make and shade of 38 millimetre round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etcetera complete. (Sample to be final by Engineer in charge prior execution of work). (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 167 :- Pedestal Unit @ 420L X 450D X 650HT - Providing and fixing of PEDESTAL @ 420L X 450D X 650HT :- To be made out of complete Membrane consist of three Drawers as per drawing as directed by Engineer in charge. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 168 :- Credestal : 1200 L X 450L X 650 HT : Providing and Fixing of LOW HEIGHT CREDESTAL : 1200L X 450D X 650H :- To be made out of Membrane Finish (2 Openable Shutter and 3 Drawer Pedestal in between ) as per drawing. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 169 :- 3 DRAWER PEDESTAL UNIT @ 392L X 450D X 680 Ht. millimetre - 3 DRAWER PEDESTAL UNIT having overall size 392L X 450D X 680Ht. millimetre with central lock and key. 3 Drawers and body are complete metal with powder coat finish, facia in 18 millimetre prelaminated particle board. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 170 :- Low Height Openable Storage of 900 L X 450 X 750 HT : Providing and fixing Openable Steel Storage of 900 X 450 X 750 Ht, with 2 adjustable shelves, complete body and shutter made in 0.8 millimetre thick and Top in 2 millimetre thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns with 25 millimetre thk additional Top on top of storage as as per drawing.

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 171 :- Executive's Table : 1800 L X 900 D X 750 HT : Providing and Fixing of Table 1800 L X 900 D X 750 HT - TOP and GABLE END to be made of Membrane finish with soft water fall edges and curved panel and Decorated Anodized section MODESTY PANEL to be made of 18 millimetre thick Prelaminated particle board with PVC edge band as per drawing. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 172 :- Executive Table @ 2250 L X 2100 D X 750 HT including Low Height Credestal @ 1200 L X 450D X 650HT : Providing and Fixing of Table @ 2250 L X 2100 D X 750 HT TOP and GABLE END to be made of Membrane finish with soft water fall edges and curved panel and Decorated Anodized section MODESTY PANEL to be made of 18 millimetre thick Prelaminated particle board with PVC edge band. INCLUDING CREDESTAL @ 1200 L X 450 D X 650 H : To be made out of Membrane Finish (2 Openable Shutter and 3 Drawer Pedestal in between) as per drawing. (Material including all lead and lifts)

A) First Floor

ITEM No. 173 :- Conference Table @ 3600L X 1400D X 750HT : Providing and Fixing of Main Table @ 3600L X 1400D X 750HT - made up of 18+18 millimetre Thick MDF top with PVC Membrane finish and waterfall edge profile. Aluminium Anodizied finish beeding of 4 millimetre thick is running all over the table top edge. Gable ends is Aerofoiled Shape with front edges in PVC Membrane finish and rest in Prelaminated MDF with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and Data wiring. , MODESTY PANEL :- to be made of 18 millimetre thick Prelaminated particle board with PVC edge band Access Flap :- For Wire manager 2 Numbers. (Material including all lead and lifts)

A) Parking Floor

C) First Floor

D) Second Floor

ITEM No. 174 :- Book Case with Glass Shutter @ 825L X 300D X 1650HT : Providing and Fixing of Book Case with Glass Shutter @ 825L X 300D X 1650HT:- to be made out of complete body & in 0.70 millimetre thick CRCA and Shutter in 1.20 millimetre thick CRCA with glass pannel in Powder coating finish as per drawing.

A) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 175 :- Providing and Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery. (Material including all lead and lifts) (First Floor)

ITEM No. 176 :- Providing and Arrangemnt of Mid Back, Normal Syncro Mechanism, Fixed Armrest, Gaslift for Seat height adjustment, Standard 5-prong / Nylon Base with Leather Upholstery. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 177 :- Providing and Arrangemnt of Mid Back, ECO CTS Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 178 :- Public Seating Chair - 3 Seater : Providing and fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 179 :- Alluminium foldable ladder for store : Providing and Fixing Foldable Alluminum Ladder 1500 millimetre Height as directed by Engineer in charge. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 180 :- Sofa Set 3+1+1 : Providing and fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length : 182.5 centimetres; Breadth : 100 centimetres; Height : 100 centimetres; Weight : 66 (Kilogram) Seating Capacity: Five Seat. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 181 :- Free Standing Table @ 1500L X 600D X 750HT : Providing and fixing Table of Size 1500 X 600 X 750 millimetre Top: made from 25 millimetre Prelaminated Particle board. All edges are covered by 2 millimetre thick PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18 millimetre both side prelaminated particle boards. All edges are covered by 0.80 millimetre PVC edge bands glued by hot melt glue applied by auto edge banding machine. KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L X 450D X 680Ht. millimetre with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 millimetre prelaminated particle board. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 182 :- Free Standing Table @ 1200L X 600D X 750HT : Providing and fixing Table of Size 1200 X 600 X 750 millimetre Top: made from 25 millimetre Prelaminated Particle board. All edges are covered by 2 millimetre thick PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18 millimetre both side prelaminated particle boards. All edges are covered by 0.8 millimetre PVC edge bands glued by hot melt glue applied by auto edge banding machine. KEYBOARD TRAY (WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L X 450D X 680 H millimetre with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 millimetre prelaminated particle board (Material including all lead and lifts)

ITEM No. 184 :- Full Height Steel Storage of 750L X 450D X 2100 HT : Providing and fixing Openable Steel Storage of 750 X 450 X 2100 Ht, with 4 adjustable shelves, complete body & shutter made in 0.8 millimetre thick and Top in 2 millimetre thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 185 :- Tea Table 900 millimetre X 750 millimetre X 450 millimetre for mild steel ante chamber : Providing And Fixing of Tea Table 900 millimetre X 750 millimetre X 450 millimetre With 12 millimetre Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18 millimetre Thick Waterproofing Ply. The outer laces to be finished with high quality 4 millimetre thick Veneer or 1 millimetre Thick Mica etcetera. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 186 :- Directional signage Design, supply, fabrication and fixing acrylic multilingual Braille (raised dots) directional signboards of size 6" x 9" designed as per accessibility standards and having 4 millimetre thick acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15 millimetre raised not less than 0.8 millimetre above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 15 millimetre raised not less than 0.8 millimetre above base plate and having a non glare acrylic cut arrow pointing in the required direction. Each signboard to be fixed as per manufacturers specifications on the wall at the approved location and at a height of 1200 millimetre from FFL and as per the directions by the engineer in charge. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 187 :- Providing and Fixing in position Acoustical Doors along with 150 X 150 millimetre teak wood frame, doors made from 50 millimetre Teak wood frame 600 X 600 centre to centre filled with 1000 Gsm synthetic wool 50 millimetre thick and 3 millimetre Tecsound from both sides, 12 millimetre waterproof ply and veneer from both sides, including 150 millimetre heavy duty SS hinges (Geze / Dorma or eq.) 4 no each leaf, with Door-closer (Dorma / Geze or eq.) including cost of required Cut-Outs, decorative mouldings / finishing-items / melamine polish and scaffolding as per Architectural and Acoustical Design and Instructions and complete in all aspects including all materials labour, finishing etcetera complete. (Material including all lead and lifts) (First Floor)

ITEM No. 188 :- Providing and fixing in position, Acoustical Ceiling made from Compressed polyester fibre nonwoven 9 millimetre panels on approved heavy duty GI frame 300 millimetre centre to centre intermediate channels at 1200 millimetre centre to centre, suspended with Hangers from Roof, including cost of required Cut-Outs, decorative mouldings / finishing-items and Scaffolding, as per Architectural and Acoustical Design and Instructions and complete in all aspects including all materials labour, finishing etcetera complete. (Material including all lead and lifts)

ITEM No. 189 :- Providing and fixing in position, Acoustical Panelling made from Fabric wrapped Compressed polyester fibre non-woven 9 millimetre panels on, 50 X 50 millimetre Sal-wood frame of 600 X 600 centre to centre having wooden supports from wall of required length, infront of 1000 GSM synthetic wool 50 millimetre thick with chicken mesh on wallside, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint and Scaffolding, as per Architectural and Acoustical Design and Instructions and complete in all aspects, including all materials labour, finishing etcetera complete. (Material including all lead and lifts)

C) First Floor

D) Second Floor

ITEM No. 190 :- Providing and fixing in position, 12 millimetre water-proof Ply wood and 1.5 millimetre laminate panels above the fabricated frame on one side , as per Architectural and Acoustical Design and Instructions and complete in all aspects including all materials labour, finishing etcetera complete. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

ITEM No. 191 :- Double Faced Mobile Unit for Compactor 2150 millimetre H x 2745 millimetre W X 900 millimetre D : Providing and fixing Double Faced Mobile Unit for Compactor 2150 millimetre H X 2745 millimetre W x 900 millimetre D - BASE FRAME : Base Frame shall be fabricated in channel Type from minimum 2.5 millimetre thick MS Sheet Size of Channel 25 millimetre X 100 millimetre X 45 millimetre. GUIDE RAILS : The guide rails shall be made out of 28 millimetre Bright bar placed on 1.2 millimetre thick M.S. Plate which will be above the floor and are as per the international standard of safety. SUPER STRUCTURE : Super structure of the Mobile storage system will consist of knock down type panels. All the components such as shelves, front panel, end panel, vertical rear panel, central partition etcetera will act as an integral member of the Unit. SHELVES : Shelves made of 22 SWG thick Prime Quality C.R.C.A. having 10 folds each will be provided each designed to carry a U.D.L. of 70 Kilograms. VERTICAL PANEL : Vertical panel consists of the front, Centre and rear panel shall be made out of 20SWG thick C.R.C.A. Prime quality Mild Steel & designed to take the load of shelves. DRIVE COVER PANEL : Made out of 22SWG thick C. R.C. A. prime quality Steel to cover the entire drive mechanism. CENTRE PARTITION : The Centre partition will comprise of a full C.R.C.A. prime quality Mild Steel 22SWG Sheet. LOCKING : System will be provided with individual rack locking as well as centralised locking arrangement on the last unit when all units are brought together, central lock when operated gets locked with the floor & does not allow access to the units. DRIVE MECHANISM : Driving Mechanism will be provided externally supported on special grade anti-friction bearing to have smooth & effortless movement. Entire mechanism or gear and sprockets shall be incorporated within the front panel provided in the front of the unit within an area of 1000 millimetre X 200 millimetre X 60 millimetre. DRIVING WHEEL : Fully Powder Coated three pronged drive wheel for better torque and free movement of the rack over the guide rail. INDEXING ARRANGEMENT : Acrylic card holders provided on the front panel for easy identification and retrieval. FINAL FINISH : Powder Coating (8 tanks process with 70 microns). (Material including all lead and lifts)

C) First Floor

D) Second Floor

ITEM No. 192 :- Multiple Compartment Lockers of 1140 L X 457 D X 1830 millimetre Ht. Providing and fixing Multiple Compartment Lockers @ 1140 L X 457 D X 1830 millimetre Ht. with 12 Compartments, complete body and shutter made of CRCA Sheet with powder coated finish as per approved colour. (Material including all lead and lifts)

A) Parking Floor

B) Ground Floor

C) First Floor

D) Second Floor

TOTAL : PART – A (Work Portion)

(ii) Electrical Work

ITEM No. 193 :- Supplying and erecting HMS PVC conduit FRLS grade 25 millimeter diametre with necessary accessories in wall /floor with chiselling appropriately as per specification.

ITEM No. 194 :- Supplying and erecting HMS PVC conduit FRLS grade 32 millimeter diametre with necessary accessories in wall /floor with chiselling appropriately as per specification.

ITEM No. 195 :- Supplying and erecting 25 millimeter diametre corrugated flexible polypropylene conduit.

ITEM No. 196 :- Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wall /ceiling as per specification

ITEM No. 197 :- Supplying and erecting PVC trunking (PVC casing-n-capping) of size 40 mm with accessories on wall /ceiling as per specification.

ITEM No. 198 :- Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit /trunking /inside pole /Bus bars or any other places as per specification

ITEM No. 199 :- Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit /trunking /inside pole /Bus bars or any other places as per specification.

ITEM No. 200 :- Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit /trunking /inside pole /Bus bars or any other places. as per specification.

ITEM No. 201 :- Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit /trunking /inside pole /Bus bars or any other places. as per specification.

ITEM No. 202 :- Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

ITEM No. 203 :- Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

ITEM No. 204 :- Supplying and erecting modular type bell-push 6A / 10A duly erected on provided plate and box with wiring connections complete.

ITEM No. 205 :- Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

ITEM No. 206 :- Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

ITEM No. 207 :- Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

ITEM No. 208 :- Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

ITEM No. 209 :- Supplying and erecting modular type blanking plate one module, duly erected on provided plate and box.

ITEM No. 210 :- Supplying and erecting PVC Surface modular switch box with double mounting plate for 1 module complete duly erected.

ITEM No. 211 :- Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module duly erected.

ITEM No. 212 :- Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected.

ITEM No. 213 :- Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected.

ITEM No. 214 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 215 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 216 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 217 :- Supplying and erecting 16 / 20 / 25 A starter (modular range) 2 module for AC unit on provided box complete and duly concealed with necessary material and connected.

ITEM No. 218 :- Point wiring for light /bell hybrid type (Surface type under false ceiling and concealed type for drops and switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification.

ITEM No. 219 :- Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops and switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification.

ITEM No. 220 :- Point wiring for light /bell /exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification.

ITEM No. 221 :- Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification.

ITEM No. 222 :- Wiring for plug on board with Switch socket surface /concealed type, copper wiring and earthing and with modular accessories as per specification.

ITEM No. 223 :- Supplying and erecting 2 pair telephone copper cable 0.5 millimeter diametre with high density polyethylene insulation, polyester taped, Nylon Rip Cord and grey colour sheathed with FR PVC, conforming to ITD specification S /WS 113C laid in provided PVC casing capping /conduit as per specification.

ITEM No. 224 :- Supplying and erecting 10 pair telephone copper cable 0.5 millimetre diametre with high density polyethylene insulation, polyester taped, Nylon Rip Cord and grey colour sheathed with FR PVC, conforming to ITD specification S /WS 113C laid in provided PVC casing capping /conduit as per specification.

ITEM No. 225 :- Supplying and erecting 20 pair telephone copper cable 0.5 millimeter diametre with high density polyethylene insulation, polyester taped, Nylon Rip Cord and grey colour sheathed with FR PVC, conforming to ITD specification S /WS 113C laid in provided PVC casing capping /conduit as per specification.

ITEM No. 226 :- Supplying, erecting and commissioning MDF Box 100x100 pairs made from min. 1.5mm thick MS sheet as per specification.

ITEM No. 227 :- Supplying, erecting and commissioning 10 pairs FR junction box with moulded plastic enclosure as per specification.

ITEM No. 228 :- Supplying, erecting and commissioning 20 pairs FR junction box with moulded plastic enclosure as per specification.

ITEM No. 229 :- Supplying, erecting and commissioning 10 pair module for connection and disconnection of telephone cable as per specification.

ITEM No. 230 :- Supplying and installing, testing and commissioning of digital (hybrid) type EPABX of 6 x 32 extensions suitable upto 96 extensions complete.

ITEM No. 231 :- Supplying, installing, testing and commissioning push button telephone instrument desk top /wall mount with caller ID and Speaker unit as per specification complete.

ITEM No. 232 :- Supplying, installing, testing and commissioning push button telephone instrument desk top unit as per specification complete

ITEM No. 233 :- Supplying and installing cat-6 cable suitable for networking as per specification.

ITEM No. 234 :- Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification

ITEM No. 235 :- Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view /CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification.

ITEM No. 236 :- Supplying and fixing tool-less IO (Ethernet) flush /surface type in provided modular box as per specification.

ITEM No. 237 :- Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification.

ITEM No. 238 :- Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x600x367 mm) as per specification

ITEM No. 239 :- Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification

ITEM No. 240 :- Supplying and erecting LED square / circular Max. 18 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen /W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

ITEM No. 241 :- Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen /W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

ITEM No. 242 :- Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen /W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

ITEM No. 243 :- Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen /W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.

ITEM No. 244 :- Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen /W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

ITEM No. 245 :- Supplying and erecting bakelite call bell with 6 cm / buzzer with double coil suitable for 230V complete erected on PVC block.

ITEM No. 246 :- Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block / sunmica block of suitable size.

ITEM No. 247 :- Supplying and erecting integrated LED street light fitting 70-75W IP65 and IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen /W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification.

ITEM No. 248 :- Supplying and erecting integrated LED flood light fitting Max. 70W IP65 and IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 8400 Lumens, min. efficacy of 120 lumen /W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification.

ITEM No. 249 :- Supplying and erecting street light Wall bracket made from 40 millimetre diametre ‘ G.I. pipe 1.2 m. in total length complete as per specification.

ITEM No. 250 :- Supplying and erecting air circulator 600 millimetre sweep oscillating type, wall mounting 1440 RPM without speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230 /250 volts single phase, 50 cycles A.C. supply, core lead wire and with moisture proof treatment to winding and with ‘E’ class insulation.

ITEM No. 251 :- Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.

ITEM No. 252 :- Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 375 /380 mm. 1400 RPM complete erected in position as per specification

ITEM No. 253 :- Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM /W) of Min. 8 , PF>0.9, THD<10% with IR remote control /compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification.

ITEM No. 254 :- Supplying and fixing anchor type fastener fan hook, with 2 nos. of 10 millimetre diametre x 75 mm long with necessary materials for ceiling fan.

ITEM No. 255 :- Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

ITEM No. 256 :- Supplying, erecting, testing and commissioning self contained water cooler 230 /250V 50Hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification.

ITEM No. 257 :- Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre /min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail and filter change indication system. (for TDS more than 200)

ITEM No. 258 :- Supplying, installing, testing and commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor. room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 5.0 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall /floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation and temperature display on indoor unit, noise level maximum 50dBA at position in provided recess with wooden frame complete specification.

ITEM No. 259 :- Supplying, installing, testing and commissioning cassette type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor room Air conditioning unit 1.8TR to 2.1TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall /floor mounting type complete with refrigerant R32 /R410A having copper condenser, dust filter, self diagnosis feature, stabilizer free operation, noise level maximum 50dBA at position as per specification.

ITEM No. 260 :- Supplying and erecting seamless outside and inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia /size 16mm complete.

ITEM No. 261 :- Supplying and erecting seamless outside and inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia /size 22mm complete.

ITEM No. 262 :- Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 12 mm for solar water heater /AC system.

ITEM No. 263 :- Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 22 mm for solar water heater /AC system.

ITEM No. 264 :- Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 265 :- Supplying, erecting and marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 266 :- Supplying, erecting and marking DPMCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 267 :- Supplying, erecting and marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 268 :- Supplying, erecting and marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 269 :- Supplying and erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways /phase (12 poles), with door, 1.2mm thickness, surface /flush mounted, IP 43 protection on iron /GI frame (horizontal busbar type) as per specification.

ITEM No. 270 :- Supplying and erecting triple pole and neutral distribution board (TPNDB), SP /TP MCBs total 4 ways /12 Poles, with door, 1.2mm thickness surface /flush mounted, IP 43 Protection on iron /GI frame (vertical busbar type) as per specification.

ITEM No. 271 :- Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification.

ITEM No. 272 :- Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB /FP MCB /RCCB /RCBO complete erected on angle iron /GI frame.

ITEM No. 273 :- Providing and erecting 4 Pole MCCB 415V, 100A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt /UV /trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification.

ITEM No. 274 :- Providing and erecting 4 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt /UV /trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification.

ITEM No. 275 :- Providing and erecting prewired meter module suitable for MCCB panel board with CTs and emfs VIF meter.

ITEM No. 276 :- Supplying and erecting porcelain /epoxy bus bar support complete erected in provided M.S. box for 200 /300A

ITEM No. 277 :- Supplying and erecting terminal spreaders suitable for 4 pole, above 100A up to 250A MCCB (Set of 8)

ITEM No. 278 :- Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for up to 250A MCCB.

ITEM No. 279 :- Supplying and erecting SS enclosure for MCCB suitable for up to 100A MCCB.

ITEM No. 280 :- Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etcetera including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

ITEM No. 281 :- Supplying and erecting plywood 12 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etcetera complete.

ITEM No. 282 :- Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etcetera for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

ITEM No. 283 :- Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface of panel / cupboard

ITEM No. 284 :- Supplying and erecting of required size electrolyte copper bus patti or bar tin plated in bus bar chamber /in panel or any other purpose, suitable for 500 volt with require capacity having thermal conductivity of 400W per meter with composition Pure copper 99.9% Current density 1.8 with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification.

ITEM No. 285 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 6 sq. mm. copper conductor complete erected with glands and lugs, on wall / trusses /pole or laid in provided trench / pipe as per specification.

ITEM No. 286 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 287 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 25 sq. mm. copper conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 288 :- Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing and recording the results as per specification.

ITEM No. 289 :- Supplying and erecting GI strip of high purity required size used for earthing on wall and /or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification.

ITEM No. 290 :- Supplying and erecting four pole ON LOAD change over switch, 415V, 200A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, operational current category AC23A complying to IS /IEC 60947-3 Part-1 /3.

ITEM No. 291 :- Supplying, fixing, and configuring 24 ports, POE switch in provided rack as per specification.

ITEM No. 292 :- Supplying and erecting 5m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male /female 19 pin HDMI connectors complete.

ITEM No. 293 :- Supplying and erecting 43" professional LED display with 1920*1080 (Full HD) Display, suitable for 16 /32 channel NVR and following features Brightness: Minimum 500 Cd /m2Contrast Ratio: Minimum 1000:1Viewing angle: 178 /178 deg.Response time: Maximum 8 msInputs: HDMI, VGA, BNC,USB, Audio In, Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24 /7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etcetera complete as per specifications.

ITEM No. 294 :- Supplying and erecting of High definition 4 /5 Megapixel IP IR Dome Camera with following features Image Sensor : Minimum 1 /2.8" Progressive Scan CMOS, Video Resolution : Minimum 2592 x 1520Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : Minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, Minimum IR distance : 50m, Lens Type : 2.8 /4 /6 mm Lens, fixed focal, Field of View :2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129°4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102°6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65°Lux sensitivity - Minimum 0.2 Lux at color, Minimum 0.05 Lux at Black and White, 0.0 Lux (IR) Night Vision Distance Minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC and PoE, IP67, IK10 - Vandal Resistant. Built in micro SD /SDHC /SDXC card slot of Minimum 128 GB, Built in microphone. Minimum Input /Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day /Night-Auto (ICR) /Color /Black and White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation.Events : Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES - 256, SSH /Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL /TLS, TCP /IP, Secure Real-Time Transport Protocol (SRTP), Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL /EN OR equivalent BIS /TECH /STQC or any indian standards as applicable, CE, FCC certified.duly erected in position on wall /ceiling /false ceiling /provided pole (mounting height not more than 5 meter) etc with all accessories etc complete as per specification.

ITEM No. 295 :- Supplying and erecting of High definition 4 /5 Megapixel IP IR Bullet Camera with following featuresImage Sensor : Minimum 1 /2.8" Progressive Scan CMOS, Video Resolution : Minimum 2592 x 1520Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : Minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, Minimum IR distance : 50m, Lens Type : 2.8 /4 /6 mm Lens, fixed focal, Field of View :2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129°4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102°6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65°Lux sensitivity - Minimum 0.2 Lux at color, Minimum 0.05 Lux at Black and White, 0.0 Lux (IR) Night Vision Distance Minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC and PoE, IP67, IK10 - Vandal Resistant. Built in micro SD /SDHC /SDXC card slot of Minimum 128 GB, Built in microphone. Minimum Input /Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day /Night-Auto (ICR) /Color /Black and White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation.Events : Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES - 256, SSH /Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL /TLS, TCP /IP, Secure Real-Time Transport Protocol (SRTP), Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL /EN OR equivalent BIS /TECH /STQC or any indian standards as applicable, CE, FCC certified.duly erected in position on wall /ceiling /false ceiling /provided pole (mounting height not more than 5 meter) etc with all accessories etc complete as per specification.

ITEM No. 296 :- Supplying and erecting 8 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB /S, Maximum sustained transfer rate 210 MB /Sec to 213 MB /S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 256, Load /Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specifications.

ITEM No. 297 :- Supplying, installing, testing and commissioning of 32 /40 Ch. Network Video Recorder (NVR), suitable connect Min. 32 IP Cameras, Upto 5 Megapixel Resolution, with HDMI /VGA outputs, provided HDMI output of 4K resolution or VGA output with output upto 1920 × 1080. Support H.265 or higher, H.264, MJPEG, Incoming Bandwidth 250Mbps with Minimum 4 SATA Hard Disks, ANR Technology, 4 SATA interfaces for 4 HDDs and capacity of each HDD upto 8TB, Minimum 02 USB port, Alarm I /O 16 /4, RJ-45 10 /100 / 1000 Mbps self-adaptive Ethernet interface, ONVIF conformance, Multiple network monitoring: Web viewer . support protocol TCP /IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS. RoHS, UL, CE, FCC certified. duly erected in provided U Rack with wiring connections, tagging and programming etcetera complete as per specifications

Providing Street Light and Water Pump

ITEM No. 298 :- Supplying and erecting integrated LED street light fitting 60W IP65 and IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen /W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF /FLS2.

ITEM No. 300 :- Supplying, erecting and marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification

ITEM No. 301 :- Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB /FP MCB /RCCB /RCBO complete erected on angle iron /GI frame.

ITEM No. 302 :- Supplying and erecting hylam sheet / ebonite 6 mm thick for covering wall entries including cutting, drilling and fixing with nut bolts / screws etcetera complete.

ITEM No. 303 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. aluminium conductor complete erected with glands and lugs, on wall / trusses /pole or laid in provided trench / pipe as per specification.

ITEM No. 304 :- Supplying and laying (including excavation of suitable width and depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground /road surface, to required depth complete.

ITEM No. 305 :- Providing and erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A /F, top 70 mm A /F on provided foundation as per specification

ITEM No. 306 :- Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification.

ITEM No. 307 :- Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification

ITEM No. 308 :- Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing and recording the results as per specification.

ITEM No. 309 :- Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 millimeter diametre G.I. Rod complete with all materials testing and recording the results as per specification

ITEM No. 310 :- Supplying and erecting GI strip of high purity required size used for earthing on wall and /or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification.

ITEM No. 311 :- Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall /cable / conduit with screws complete.

ITEM No. 312 :- Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T /sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

ITEM No. 313 :- Supplying and erecting triple pole and neutral distribution board (TPNDB), 3 pole / 4 pole MCCB as incomer and outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles), with door, 1.2mm thickness, surface /flush mounted, on iron /GI frame (vertical busbar type) as per specification.

ITEM No. 314 :- Providing and erecting 3 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt /UV /trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification.

ITEM No. 315 :- Supplying, erecting and marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 316 :- Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etcetera for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

ITEM No. 317 :- Supplying and erecting plywood 12 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etcetera complete.

ITEM No. 318 :- Supplying and erecting minimum Three and above star rated submersible pump set suitable for erection on open well of 2.25 KW /3 HP with 415 V 50 c /s. A.C. supply, having delivery head from 27 to 9 m and discharge from 300 to 660 litres. per minute and pipe of Suction 65mm /Delivery 50 mm diameter erected with necessary H type clamps as per specification.

ITEM No. 319 :- Supplying and erecting flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

ITEM No. 320 :- Supplying and erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible /centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter / voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etcetera

ITEM No. 321 :- Supplying, erecting and marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 322 :- Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB /FP MCB /RCCB /RCBO complete erected on angle iron /GI frame.

ITEM No. 323 :- Supplying and erecting 525 V 3 phase, 50 Hz., MPP type capacitor having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours kVAr bank of metalised polypropylene condensers (MPP) with the standard capacities of 2, 3, 5, 7, 10, 12.5 and 15 kVAr units of P.F. correction for operation on 3 phase 50 Hz. with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee.

ITEM No. 324 :- Supplying and erecting four pole ON LOAD change over switch, 415V, 40A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, rotary handle,operational current category AC23A complying to IS /IEC 60947-3 Part-1 /3.

ITEM No. 325 :- Supplying and erecting ISI mark GI pipe 50 millimeter diametre‘B’ class at position with accessories complete as per specification.

ITEM No. 326 :- Supplying and erecting non return valve 50 millimetre diametre in position made of gun metal complete.

ITEM No. 327 :- Supplying and erecting 50 millimeter diametre gun metal sluice valve at position with necessary materials complete.

Solar Ongrid System

ITEM No. 328 :- Supplying, installing, testing and commissioning of 5 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 15 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB / DCDB , MCB etcetera wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card /chip for 5 years including net charges for RMS system, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification.

ITEM No. 329 :- Supplying, erecting and marking DPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification

ITEM No. 330 :- Supplying and erecting GI sheet 0.6 mm (24 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etcetera including cutting, bending, drilling, welding, riveting etcetera and painting with one coat of red lead paint and 2 coats of enamel paint.

ITEM No. 331 :- Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB /FP MCB /RCCB /RCBO complete erected on angle iron /GI frame.

ITEM No. 332 :- Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etcetera for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

ITEM No. 333 :- Supplying and erecting static energy Trivector meter 440 V 50 Hz. 20-100A ISI mark meter AC 3 phase 4 wires LCD /LED display (Measuring and display Trivector, V, I, kW, PF, Hz, Last month history of kWh and MD in kW) with special features like TOD, Tamper logging, Optical Communication Port and Display in absence of Power complete erected on polished teak wood board duly wired with required size of weather proof PVC wires duly tested for class 1.0 accuracy by electric supply company.

ITEM No. 334 :- Supplying and erecting three phase 10 to 60 A net meter DLMS compliance of accuracy class 1.0, 3 x 240V, 50 Hz, with backlit LCD display, optical port and RJ 232 port (measures import kWh, kVAh, export kWh, kVAh, Net kWh, kVAh, V, I, kW, 6 months history of energy) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.

ITEM No. 335 :- Supplying, installation and marking of surge arrestor / surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 50 kA for three phase and neutral with compliance to IEC 61643-11 as per specification

ITEM No. 336 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 10 sq. mm. aluminium conductor complete erected with glands and lugs, on wall / trusses /pole or laid in provided trench / pipe as per specification.

ITEM No. 337 :- Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification.

ITEM No. 338 :- Supplying and erecting copper strip of high purity required size used for earthing on wall and /or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification.

ITEM No. 339 :- Supplying and laying (including excavation of suitable width and depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground /road surface, to required depth complete.

ITEM No. 340 :- Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).

Transformer and Allied work

ITEM No. 341 :- Supplying and erecting V cross arm with ISM channel of 75x40x6mm for 11kV HT OH line with arrangement to fix insulator at 45mm from the end and horizontal distance between insulators 1220mm bent at angle of 60 degree keeping base 305mm and the total vertical height of V cross arm as 460mm, and fixed on pole with MS clamp of 80x10 mm, nut bolts, washers complete as per specification.

ITEM No. 342 :- Supplying and erecting 75x40 x6mm with 4.4mm thick web and 7.3mm thick flange channel (top pin) with clamp of suitable length so as to maintain vertical clearance of 1065mm for 11kV, 1320mm for 22kV between insulators for erection of top pin insulators complete as per specification

ITEM No. 343 :- Supplying and erecting bracket for guarding of HT OH Line, made from channel iron 1600mm in length and 75x40x6mm. erected on pole complete as per specification.

ITEM No. 344 :- Supplying and erecting single pole cut point channel set of for 11kV HT OH line two channel of size 100 x 50 x 6mm 1.6 metre long having stud angle of size 50 x 50 x 6 mm 1.5 metre long with necessary clamps, nut bolts etcetera complete as per drawing.

ITEM No. 345 :- Supplying and erecting rolled steel joist (girder) pole 100 x 116 mm (23 kg /m) with base plate in provided foundation as per specification.

ITEM No. 346 :- Supplying and erecting end pole D. P. Structure for 11 /0.415 kV, 200 kVA Transformer with R.S.J. Pole 2 Nos. of size 100mm x 116 mm x 11 m Long with suitable Distribution Box of C.R.C.A. Sheet 16 SWG with 4 Pole MCCB 400 Amps as incomer and 6 Nos.200 Amps Kitkat / MCCB for out going circuits. Transformer D.P. Structure includes the A. B. Switch 200 Amps, D.O. fuse Set and L.A. Set. 2 Nos. Top channel of size 100 mmx 50 mm for erection of A.B. Switch and 2 Nos. Base channel of size 100 mm x 50 x mm for erecting Transformer. Channel of size 75 x40 mm for erecting D.O. Fuse Set, L.A., A.B. Switch handle etcetera Angle of size 50 x 50 x6 mm for erecting Distribution Box , Transformer Belt etceteraas per drawing (min. 124 Kg. iron work) with necessary clamps, Nut-bolts. V cross arm, top clip, insulators etcetera complete with caution board and barbed wire. D.P. Structure shall be erected in c.c. foundation complete.

ITEM No. 347 :- Providing and erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt / UV / trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification.

ITEM No. 348 :- Supplying and erecting ACSR conductor of size 6 /1-2.59 mm complete. (Weasel) (127.7 kg /km) as per specification.

ITEM No. 349 :- Supplying and erecting porcelain disc type insulator 45KN with necessary hardware suitable for 11kV line, complete as per specification.

ITEM No. 350 :- Supplying and erecting porcelain pin type insulator with GI pin suitable for 11kV line, complete as per specification.

ITEM No. 351 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 150 sq. mm. aluminium conductor complete erected with glands and lugs, on wall / trusses /pole or laid in provided trench / pipe as per specification.

ITEM No. 352 :- Supplying and erecting guarding lace for HT OH line with 8SWG G.l. wire to protect the HT OH line with binding wire of 20SWG G.l. wire for 75mm section on either side.

ITEM No. 353 :- Making cement concrete foundation including excavation (60 x 60) cm x deep 1 /6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles)

ITEM No. 354 :- Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete, (20 to 25) millimetre stone metal with necessary curing and finishing complete. (for stay).

ITEM No. 355 :- Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing and recording the results as per specification.

ITEM No. 356 :- Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 millimeter diametre G.I. Rod complete with all materials testing and recording the results as per specification

ITEM No. 357 :- 200KVA Dist. Transformer (Non-CSR) Supplying, installing, testing and commissioning 3 phase,11 /0.433 kV, 50 Hz., 200 kVA, Mineral oil immersed and naturally cooled outdoor type, Aluminium wound Non-sealed delta /star connected with additional neutral brought out on load side, temperature rise should not Exceed 45℃ by thermometer in oil and 50℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, having 7 number of tap positions ,with standard accessories complete with test certificate with losses below 980 Watts at 50% load, 2930 Watts at 100% load as per IS:1180 (part 1) : 2014, with necessary permissions of Electrical Inspector, as per specification

ITEM No. 358 :- Supplying and erecting fencing of seyction having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete as per specification

ITEM No. 359 :- Supplying and erecting 50 x 50 x 6 mm angle iron as corner support 2m long fixed at the middle of the fencing frame and the other side inclined at 30 degree angle, in cement concrete foundation of 15 x 15 x 40 cm complete duly painted with one coat of red oxide and two coats aluminium paint complete.

ITEM No. 360 :- Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation, and painted complete as per specification.

ITEM No. 361 :- Supplying and spreading stone metal 25 mm size for 100 mm depth above the ground level complete.

ITEM No. 362 :- Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).

Providing 8 Passanger Lift

ITEM No. 363 :- Supplying and erecting HMS PVC conduit FRLS grade 25 millimeter diametre with PVC accessories on wall /ceiling as per specification.

ITEM No. 364 :- Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit /trunking /inside pole /Bus bars or any other places as per specification.

ITEM No. 365 :- Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit /trunking /inside pole /Bus bars or any other places as per specification.

ITEM No. 366 :- Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

ITEM No. 367 :- Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected.

ITEM No. 368 :- Point wiring for light /bell /exhaust fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification.

ITEM No. 369 :- Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification.

ITEM No. 370 :- Wiring for plug on board with Switch socket surface /concealed type, copper wiring and earthing and with modular accessories as per specification.

ITEM No. 371 :- Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen /W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

ITEM No. 372 :- Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen /W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

ITEM No. 373 :- Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM /W) of Min. 8 , PF>0.9, THD<10% without IR remote control /compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification.

ITEM No. 374 :- Supplying, erecting and marking DPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification.

ITEM No. 375 :- Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB /FP MCB /RCCB /RCBO complete erected on angle iron /GI frame.

ITEM No. 376 :- Supplying, erecting and commissioning 2 pole RCCB 40A, electromagnetic type with 30 /100 /300 mA sensitivity with earth leakage trip indication complete as per specification.

ITEM No. 377 :- Supplying, erecting and commissioning 4 pole RCCB 63A, electromagnetic type with 30 /100 /300 mA sensitivity with earth leakage trip indication complete as per specification.

ITEM No. 378 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 4 sq mm copper conductor complete erected with glands and lugs, on wall / trusses /pole or laid in provided trench / pipe as per specification.

ITEM No. 379 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification.

ITEM No. 380 :- Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing and recording the results as per specification.

ITEM No. 381 :- Supplying and erecting GI strip of high purity required size used for earthing on wall and /or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification.

ITEM No. 382 :- SITC of Electric Traction Passenger Lift with · Rated capacity :- 8 Passenger /680Kg · · Floors :- G+3 floor (4 Stops /4 Landings) · Travel :- 3 to 4.2 mtrs · Location of Lift Machine:- MR · Rated speed :- 1.0mps VS · Car /Landing door clear opening of 800 mm wide x 2250 mm high · Clear Car size of 1300 .mm wide x1100 mm deep x 2250mm high · Lift shaft available having clear size of 1900 mm wide x 1900 mm deep, 1500 mm Pit depth, 4200 mm Overhead. (1 NOS) · Doors type :- COPO /TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves /frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower /fan for ventilation and SS chequered plate flooring, handrails, mirror, emergency light etcetera The lift car interior design shall be done as per the directions of engineer in charge.· COP with SS face plate having metallic push buttons with Braille code and luminous indicator around button with FPI, scrolling UP /DN LED indicator and with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi and English with intercom system with telephone instrument in Lift car, LMR and FCC /ground floor.

· LOP with SS face plate having recess /surface push button box for all landings with scrolling UP /DN LED indicator having metallic push buttons with Braille code and luminous indicator around button with CPI, Lift car arrival and next travel direction audio-visual indication at all landings.

Full Collective control system Lift controller based on microprocessor / PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as over current, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etcetera various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open /close operation from COP etcetera The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size and strength, copper wire for power and control circuit, with provision for addition of floor /control card and allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. · ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2 nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car and in LMR /inside lift shaft top aimed on Lift machinery and controller with NVR kept in LMR /FCC with HDR data backup for min. 90 days with min.18” FHD TV monitor, to be kept in FCC /LMR as directed by Engineer In Charge.

· Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts /hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor / shaft walls complete with main /diverter traction sheaves, suspension wire ropes /belts of adequate size and strength. · Other mechanical parts such as 'T' section adequate size guide rails for car and counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etcetera erected with necessary steel work. · Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required and scaffolding for erecting guide rails, providing and fixing steel girders /RCC work having adequate strength for mounting and hoisting lift machine etcetera complete as per specification. · General: - Job includes entire procedure of obtaining all necessary erection permissions and "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.

Firefighting, Fire Sprinkler, Fire Detection and PA System

ITEM No. 383 :- Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etcetera for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

ITEM No. 384 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench/pipe as per specification

ITEM No. 385 :- Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 50 sq. mm. copper conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench/pipe as per specification

ITEM No. 386 :- Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width and 100 mm height comprising all required standard accessories.

ITEM No. 387 :- Providing and erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width and 20 mm height complete with necessary hardware.

ITEM No. 388 :- Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing and recording the results as per specification

ITEM No. 389 :- Supplying and erecting GI strip of high purity required size used for earthing on wall and /or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification.

ITEM No. 390 :- Supplying, installation, testing and commissioning of main fire pump (MFP / EP) suitable for water discharge of 1600 to 1800 LPM at 70 to 55 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 30kW or of suitable kW capacity for manual /automatic operation and consisting of following :(a) Horizontal type, single stage, centrifugal /split casing pump of cast iron body and bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etcetera as required.(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification.

ITEM No. 391 :- Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 90 to 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 9.3 kW or of suitable kW capacity for manual /automatic operation and consisting of following :(a) Horizontal /vertical type, multi stage, centrifugal casing pump of cast iron body and bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etcetera as required.(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, as per specification.

ITEM No. 392 :- Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 900 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW or of suitable kW capacity for manual /automatic operation and consisting of following :(a) Horizontal /vertical type, single /multi stage, centrifugal casing pump of cast iron body and bronze /CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etcetera as required.(d)Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification.

ITEM No. 393 :- Supplying, installation, testing and commissioning of main fire pump (MFP /DP) suitable for water discharge of 1600 to 1800 LPM at 70 to 50 m head driven by 45 HP or suitable HP capacity diesel engine at required working speed suitable for manual /automatic operation and consisting of following :(a) Horizontal type, single stage, centrifugal casing pump of cast iron body and bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.(b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine, exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etcetera as required.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etcetera as required.(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification.

ITEM No. 395 :- Supplying and erecting G.I. pipe ‘C’ class ERW 25 millimetre diametre with necessary fittings complete as per specification.

ITEM No. 396 :- Supplying and erecting G.I. pipe ‘C’ class ERW 50 millimetre diametre with necessary fittings complete as per specification.

ITEM No. 397 :- Supplying and erecting G.I. pipe ‘C’ class ERW 75 /80 millimetre diametre with necessary fittings complete as per specification.

ITEM No. 398 :- Supplying and erecting G.I. pipe ‘C’ class ERW 100 millimetre diametre with necessary fittings complete as per specification.

ITEM No. 399 :- Supplying and erecting G.I. pipe ‘C’ class ERW 150 millimetre diametre with necessary fittings complete as per specification.

ITEM No. 400 :- Providing coating of bitumen paint and 4 mm thick wrapping for underground 100 mm ring main of fire fighting system.

ITEM No. 401 :- Providing coating of bitumen paint and 4 mm thick wrapping for underground 150 mm ring main of fire fighting system.

ITEM No. 402 :- Supplying and erecting 100 millimetre diametre cast iron foot valve ball type /flap type with strainer for negative suction complete as per specification.

ITEM No. 403 :- Supplying and erecting 150 millimetre diametre cast iron foot valve ball type /flap type with strainer for negative suction complete as per specification.

ITEM No. 404 :- Supplying and erecting 80 millimetre diametre cast iron foot valve ball type /flap type with strainer for negative suction complete as per specification.

ITEM No. 405 :- Supplying and erecting 100 millimetre diametre cast iron double flange ball type NRV complete with PN16 pressure rating, as per specification.

ITEM No. 406 :- Supplying and erecting 150 millimetre diametre cast iron double flange ball type NRV complete with PN16 pressure rating, as per specification.

ITEM No. 407 :- Supplying and erecting 25 millimetre diametre gun metal gate valve complete with PN16 pressure rating, as per specification

ITEM No. 408 :- Supplying and erecting 50 millimetre diametre gun metal gate valve complete with PN16 pressure rating, as per specification

ITEM No. 409 :- Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification.

ITEM No. 410 :- Supplying and installing one piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000 litres fitted with necessary accessories complete as per specification.

ITEM No. 411 :- Supplying and installing wall mounting swinging hose reel drum fitted with 19 millimeter diametre 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification.

ITEM No. 412 :- Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification

ITEM No. 413 :- Supplying and erecting stainless steel branch pipe 63 millimetre diametre fitted with 20 millimetre diametre detachable hexagonal nozzle complete as per specifications.

ITEM No. 414 :- Supplying and erecting 150 millimetre diametre fire brigade header suitable for supplying water in fire tank complete as per specification.

ITEM No. 415 :- Supplying and erecting fire brigade header ( Siamese connection )of 150 mm dia, for supplying water in fire tank complete as per specification.

ITEM No. 416 :- Supplying and erecting 300 millimetre diametre 1.5m in height air vessel / tank fabricated from min 5mm thick M.S. sheet complete as per specification.

ITEM No. 417 :- Supplying and erecting 20 /25millimetre diametre gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification.

ITEM No. 418 :- Supplying and erecting 100 millimeter diametre pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12 /15 millimeter diametre pad cock valve, erected with provided G.I. pipe, elbow etcetera complete as per specification.

ITEM No. 419 :- Supplying and erecting 12 /15 millimetre diametre pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification.

ITEM No. 420 :- Supplying and erecting brass orifice plate having 6 millimetre thickness, 140 millimetre outer diametre with required diameter of inner hole at every single outlet hydrant valve as per specification.

ITEM No. 421 :- Supplying and erecting M.S. /CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etcetera duly painted in post box red colour( Code 538 of IS 5)

ITEM No. 422 :- Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall / ceiling complete as per specification.

ITEM No. 423 :- Supplying, erecting, testing and commissioning 120 W amplifier suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification.

ITEM No. 424 :- Supplying, erecting, testing and commissioning 15 to 30 Watts sound column or ceiling mounted complete as per specification.

ITEM No. 425 :- Supplying, erecting, testing and commissioning rust free microphone floor stand of chrome plating /powder coating or S.S. material, 500 mm to 1500 mm height and sturdy mechanism ensuring trouble free movement complete.

ITEM No. 426 :- Supplying, erecting, testing and commissioning rust free microphone table stand of chrome plating /powder coating or S.S. material, up to 500 mm height and suitable base for sturdy mechanism ensuring trouble free movement complete.

ITEM No. 427 :- Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification.

ITEM No. 428 :- Supplying, erecting, testing and commissioning of 1.0 sq. mm speaker wire complete.

ITEM No. 429 :- Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 millimetre (½") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification.

ITEM No. 430 :- Supplying, erecting, testing and commissioning vane type water flow detector 100 millimeter diametre with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes.

ITEM No. 431 :- Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut and bolts routed in wall complete.

ITEM No. 432 :- Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

ITEM No. 433 :- Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps).

ITEM No. 434 :- Supplying and erecting ISI mark GI pipe 32 millimetre diametre ‘C” class at position with accessories complete. Specification.

ITEM No. 435 :- Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C. /rock /stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.

ITEM No. 436 :- Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C. /rock /stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.

ITEM No. 437 :- Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay /earth plate / for laying cable / pipe and clearing the site by removing debris and making the site as required complete.

ITEM No. 438 :- Making trench in hard murum /Tar road having 0.9 m depth and minimum 0.3mtr width for laying provided cables of voltage range 3.3 kV to 11 kV complete as per specification.

ITEM No. 439 :- Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 2 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS / OPC / L-ON interface etcetera conforming to IS 15908:2021, IS 2189: 2008, EN 54 and VDS / FM / UL 864 (10th edition) with 3 years replacement warranty.

ITEM No. 440 :- Supplying, installing, testing and commissioning of addressable optical smoke detector, single /twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty

ITEM No. 441 :- Supplying, installing, testing and commissioning of intelligent addressable thermal /heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices /ceiling cable trenches /less ventilation area's etcetera with 3 years equipment replacement warranty IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 standards.

ITEM No. 442 :- Supplying, installing, testing and commissioning of addressable manual call points ( break glass type /pull station type), made of addressable break glass plastic square in shape surface /flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty

ITEM No. 443 :- Supplying, installing, testing and commissioning of addressable fire control /relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays, EN 54 or UL Listed

ITEM No. 444 :- Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays as per specifications

ITEM No. 445 :- Supplying, installing, testing and commissioning of addressable fire isolator module complete as required. EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays as per specifications

ITEM No. 446 :- Supplying, installing, testing and commissioning of addressable horn cum strobe sound / hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty.

ITEM No. 447 :- Supplying and erecting 200 millimetre diametre cast iron double flange ball type NRV complete with PN16 pressure rating, as per specification.

ITEM No. 448 :- Supplying and erecting 1000 mm long, 25 millimeter diametre Stainless steel flexible Dropper pipe (hose) for dropping sprinkler below false ceiling. Pipe shall have 16 bar rating and with union /reducer coller, clamps etcetera as required. Pipe shall have UL listing.

ITEM No. 449 :- Supply and fixing of approved type rosette plates (Recessed type, in two piece) for Sprinklers below false ceiling area and the finish shall be powder coated and color shall be as approved by Engineer-in-charge.

OMKAR CONSTRUCTION