SPECIAL REPAIR TO BLDG NO T-100 (OR SINGLE LIVING ACCN) ALONG WITH CERTAIN OTHER REPAIR/ REPLACEMENT WORKS AT 2 TECH TRG BN AT 3 EME CENTRE UNDER GE BHOPAL

Amount

Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings, including ridge complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI Based corrugated steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed.

Dismantling of wall and ceiling hard boards/ AC sheets and plywood of any thickness in any position including cover fillets complete all as specified and directed

M&L for galvanised cold rolled steel section frame work size 600x600mm grid size using 24 x 38 x 0.50mm (composite thickness) tee (bottom pre-coated) and 24x24x0.50mm (composite thickness) wall angle galvanised cold rolled steel section including suspenders as per manufacturers instruction as in ceiling, complete all as specified and direcetd Make: GAPSON (Gabsec) or equivalent as approved by the GE)

M&L for Asbestos free calcium silicate board of size 600 x 600 x 6mm thick fixed to steel frame work as in ceiling, including applying two coats of oil bound distemper all as specified and directed .

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in any mortar, complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25 mm thick over and including 15mm thick screed bed in CM 1:6 etc, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc, complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25 mm thick over as in skirting and including 10 mm thick rendering in CM 1:4 set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc, complete all as specified and directed.

M&L for granite (any type) 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter, shelves and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7mm to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 Sqm, but not exceeding 0.18 Sqm, in floors over and including 15mm thick screed in CM 1:6 etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles, complete all as specified & directed.

M&L for coloured glazed wall tiles in vertical surface 300 x450mm x7mm thick , set and jointed over and including 10 mm thick rendering even and rough in CM1:4 for backing of tiles,set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.

M&L for joint free coloured designer flooring tiles 10 mm thick (Square/rectangular) polished, heavy duty, anti slip type, laid in floors, steps, edges, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick rendering in CM 1:4 complete all as specified and directed. . Make: Somany (Durastone)/ Johnson (Endura)/ Kajaria

Demolition of cement concrete in ground floor, (un-reinforced) paving n exc 15 cm thick (below or above GL) complete all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection, aprons, hard standing, path and like including finishing the surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling, sub base and mass concrete, complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in Foundations, sub base and mass concreteand like complete all as specified and directed by Engr-In-Charge.

Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed

Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed.

S&F 125X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc, made out of 1.25mm thick MS Sheet, complete all as specified and as directed.

S&F 105X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, made out of 1.25mm thick MS Sheet, complete all as specified and as directed.

M&L for cement concrete Type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregate) as in filling of door frames of pressed steel and in bed blocks and like etc complete all as specified and as directed.

S&F 35mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides

S&F in Window ECO 4000, of double rebate openable/ fixed window made of galvanised steel colour coated/ powder coated (base steel as per IS 513 Of 'D' quality, galvanised as per IS 277 with zinc of 120 gms/sqm) with total thickness of coating 0.58 microns thick and back coated with alkyd backer 5-7 micron thick or powder coated with pure polyster powder up to 50-60 micron thick. Outer frame section 72 x 55 mm , center mullion section 72 x 50 mm, shutter section 47 x 20 mm, fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/ grills, the section cut to length mitre joined with corner bracket, center millions fixed with mullions cap, stay, handle, latch, 2 nos of heavy duty stainless steel pivot hinges per shutter and paneled with 5 mm thick plain float glass and SS mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propyelene Diamine Monomer) gaskets including fixing windows in the Concrete /Masonry wall by means of self expanding screw, including 10 mm square bars welded to 6 x 12 mm flat at a distance 150mm C/C (Pitch) etc

Providing and fixing fixed louvers fabricated from Roll formed sections made of galvanized Steel colour coated/ powder coated (base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 grams/ Sqm) with thickness of 0.58 mm coated sections to be primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33 x 58 mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/ masonry walls by means of self expanding screws.

S&F Solid PVC door frame of size 50 mmx 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as per manufacturer instruction complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 200 mm Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed

S&F 150 mm Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed

S&F 250mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed

S&F 100 mm mild steel butt hinges medium weight, cold rolled complete all as specified and directed

S&F 100 mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type complete all as specified and directed

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed

S&F 35mm thick second class hard wood glazed and Skeleton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note:- Size of member of shutters as specified in SSR Part-I 1991 section 8 clause 8.24 (a).

S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples fixed complete all as specified and directed..

M&L for preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified and directed.

M&L for Mild steel TMT Bar 8mm dia and over cut to length, bent to shape to required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild seel wire (annealed ) not less than 0.9mm dia or securing with clips quality confirming all as specifed and directed.

M&L for Providing precast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and directed. Note:- Reinforcement to be measured seperately.

Demolition of brick work, built in Cement mortar including all quoins, arches, pillars etc, complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces, including wall tiling if any, raking out joints , hacking for key, scrubbing down with water complete all as specified and directed.

M&L for brick work with sub class ‘B’ (modular size bricks) straight or curved on plan exc 6 m mean radius, built in cm 1:6 complete all as specified and directed.

M&L for brick work with sub class ‘B’ (modular size bricks) straight or curved on plan any radius in half brick thick walls, built in CM 1:4, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on brick/ concrete surfaces including finishing the surfaces even and smooth (without using extra cement), complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick/ concrete surfaces including finishing the surface even and smooth (without using extra cement) complete all as specified and directed

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat of exterior water base emulsion paint on walls over a coat of primer, complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of cement based putty complete all as specified and as directed. Note: Thickness of putty shall be as per manufacturer instruction & Putty shall be measured and paid seperately under respective item.

M&L for preparation of existing treatment by complete removal of existing treatment of any layers and including filling of cracks, holes by suitable material like cement based putty, and applying two coats of exterior water base emulsion paint over a coat of primer on walls all as specified and directed. Make: SHALIMAR/ ASIAN (ULTIMA)/ BURGER (WALL MASTA) or equivalent in approved make by GE.

M&L for complete removal of existing treatment from walls and applying two coats of oil bound distemper over a coat of cement based putty complete all as specified and as directed. Note: Putty shall be measured and paid for seperately under respective item.

M&L for applying one coat of white wall care putty on walls complete all as specified and directed. Make- Birla/ JK putty or equivalent as approved by the GE. Note: Thickness of putty shall be as per manufacturer instruction.

S&F steel work as in tubular (round/ square/ rectangular) shape of pipes as approved by Engr-In-Charge) trusses of semi circle shape including post special shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 grade St-240 complete all as specified and directed.

M&L for MS work, angle iron, flat iron, MS plates as in brackets, cleats, fastners, wind ties, supports, base for posts etc with riveted, bolted or welded attachment, complete all as specified and directed.

S&F in repairs 25mm dia draphery rod, mild steel, chromium plated 1mm thick of standard quality with fixing brackets, stops rollers fancy type etc, complete all as specified and directed.

S&F in repairs syphonic action type PVC low level flushing cistern 10 ltrs capacity incl 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads & washers with connectiocomplete all as specified and directed.

S&F in repairs 15 mm bore stop cock (angle valve) cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repairs 15 mm bore Bib taps long body with flange single lever, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed, complete as specified.

S&F in repairs 15 mm bore stop cock, cast copper alloy, chromium plated with long shank and cut (concealed type), screwed down, screwed for iron pipe or union complete as specified and directed.

S&F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as specified and directed.

S&F in repairs Vitreous china wash basin, white, oval type, size 520 x 450mm including CP waste coupling, 32mm dia PVC waste pipe of suitable length, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed. Make:- SOMANY (Cat No.110501) or equivalent in HINDWARE/ CERA/ PARRYWARE as approved by GE.

S&F in repairs 15 mm pillar cock swan neck, single lever, chromium plated, screwed down high pressure, with or without lettered Hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

S&F 20 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors, complete all as specified and directed.

Taking up or down 15 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors, complete all as specified and directed.

S&F in repairs vitreous china squatting pan "Orissa Pattern" size 580mm x 440mm white with integral foot rests, including prov of cement concrete bedding and 'P' or 'S' trap as required, complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including CP urinal spreader complete all as specified and directed.

S&F in repair 100mm dia CP grating, complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and directed.

Returning filling in with excavated soil of any type including spreading, levelling, watering and well ramming in layers n exc 25 cm thick complete all as specified and directed.

Removing excavated material exc 250 m and not exc 500 mtr and depositing where directed complete all as specified and directed by Engr-In-Charge.

Demolition and breaking up of 150 mm dia of drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and directed.

M&L for 150 mm bore salt glazed stone ware drain pipes laid in trenches and jointed, complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2, concrete bed to drain pipes 100 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete), 110mm/ 75 mm dia, set in cement mortar, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls/ laid in trenches/ floors complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls/ laid in trenches/ floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm dia complete all as specified and directed.

S&F PVC (SWR) bends any radius 75 mm dia complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) floor/ Nahani trap with grating including jointing with solvent cement, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) vent cowl, complete all as specified and directed.

Dismantling unframed wk timber scantlings 40 sq. cm and over in section, in any position.

S&F rolled mild steel work as in rafter, purlins, trusses and like (beam, tee, angle, channel or flat sections ( Fe 410-W(Gde E-250 quality) complete all as specified and directed by Engr-In-Charge.

M&L for preparing new or untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of zinc primer complete all as specified and directed

Hardcore of Broken stone or boulders of gauge n exc. 63 mm, deposit-ed, spread and lev-elled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L sand cushioning for laying of interlocking paver block & under ground cable, complete all as specified and directed. Note: Punned thickness shall be measured and paid.

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, with grey cement and pigments glossy finish, complete all as specified and directed.

S&F 4mm GI wire for mosquito net hanging in room including wall hanging spring, complete all as specified and as directed.

Taking up or down steel tubing and connction including cleaning for refixing or removal in store all as specified and directed of following size:-

25 mm bore

Supply, fixing & laying in repairs GI tubing medium grade with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittings for laid in trenches/wall/ceiling/ floor/ all as specified and directed of following size Make: Surya Prakash/ Jindal/ TATA / BST/ Swastik

25 mm bore

Refixing of existing old GI tubing taking down under item 63.00 & 92.00 above and connections in new or old position including cleaning internally and externally, any grade/ make laid in trenches/ wall/ floor/ ceiling including all type of new fittings i.e. sockets, Tee union elbow etc all as specified and directed of follwing size:-

20 mm bore

25 mm bore

Taking down u/s tank and Supply and fiixing rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) tripple layer, ISI marked hoisting & fixed in position all as specified in SSR part-I of following capacity:- Make : Sintex (Ist Quality), Polywell/ Plasto

1000 ltr capacity

Taking down u/s float valve and M&L for PTMT float valve high pressure with high density plastic ball, with epoxy coated Aluminium rod screwed for iron pipe and fixed in all as specified and directed of following size:-

20 mm bore

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M & L for concealed/ Surface point wiring for one light/ fan point with 1.50 sqmm (nominal area), FRLS PVC insulated, unsheathed, single core multi-stranded copper conductor cable, 1100 volts grade,ISI marked controlled by one one-way switch, drawn through and including concealed medium grade PVC conduit not less than 20 mm dia, ISI marked, with all accessories(PVC Casing and caping of size 25 mm , ISI marked with complete accessories to be used wherever wiring to be run on ceilings and concrete surfaces) including one run of 1.5 sqmm FRLS muti stranded copper conductor (Green colour cable) as earth continuity wire connected to common earth dolly, including sunk sheet steel terminal box GI/MS/ pressed steel terminal box to be conclead in wall, duly painted with two coates of anti corrosive black bituminous paint over a coat of red oxide primer in and out sides and two coated of aluminium paint on internal surface , including laminated hylum sheet cover, ISI marked of Make" Hylem" for mounting of fittings like switches, sockets, fan regulators etc. fixed with galvanised screw and cup washer complete all as specified and directed. Note : Wiring to be done as per arroved colour code in IE rule.Rate includes chase cutting for concealed wiring. Make of Cable: Polycab/ L&T/ Havells

Ditto all as per item No. 98 here-in-before, but for Fan point controlled by one push button on same board with other switches or independent with cable 1.5 Sqmm, complete all as specified and directed.

Ditto all as per item No. 98 here-in-before but for 3 pin socket outlet, 5 Amp on the same board with other switches, complete all as specified and directed.

Ditto all as per item No. 98 here-in-before, but for 3 pin 5 amp switch socket combination on independent board with other switch complete all as specified and directed.

Ditto all as per item No. 98 here-in-before, but for exhaust fan point controlled by one push button on same board with other switches or independent with cable 1.5 Sqmm. complete all as specified and directed.

Ditto all as per item No. 98 here-in-before but wiring with 2.5 Sq mm copper cable for 5/15 amp switch socket combination on independent board and provision of 1.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed. .

Ditto all as per item No. 98 here -in- before but wiring with 4.0 Sq mm FRLS mutistranded copper conductor cable for power point with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

S&F Polycarbonate switch piano, flush button, single pole, one way 5 Amp , 240 volts ISI marked, Make: Anchor/ Havells/ L&T (white colur)

S&F ceiling rose, surface type, 3 terminal, 240 V. Make: Anchor/ Havells/ L&T (white colur)

S&F lamp holder (Angle holder) PVC/ polycarbonate type cased body with back plate suitable for pendent fittings including LED bulb of 9 Watt. Make: Anchor/ Havells/ L&T (white colur)

S&F Stepped type electronic fan regulator, Delux model, 100 watt, 240V, flush type. Make: Anchor/ Havells/ L&T (white colur)

Supply and fixing Polycarbonate socket outlet 2-in-1, 5 pin 5 Amps, 240 volts, flush type Make: Anchor/ Havells/ L&T (white colur)

S&F Polycarbonate socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete as directed . Make: Anchor/ Havells/ L&T (white colur)

S&F Polycarbonate switch piano flush button single pole one way 15 Amp 240 volt ISI marked, Make: Anchor/ Havells/ L&T (white colur)

S&F single pole and neutral enclosure with two pin and earth, plug and socket , suitable for single phase 240 V,complete with one single pole MCB of capacity 20 amps having `C` charactristic, breaking cap 10 KA, including industial plug top, complete all as specified and as directed. Make: Legrand cat part No. 607841 or equivelent in Schinder/ L&T.

Taking down old unserviceable sub main wiring of any size and any discription all as directed by Engr-In-Charge.

M&L for Sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in but including non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 4 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete all as directed.

M&L for Sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 2.5 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete.

Taking down existing u/s fitting any type any size and S&F LED 20/21 Watt tube light fitting (T8 type) , including LED retrofit tube 20/21 W , 240 v, PF > 0.90, colour Temp 6500 K, System Luminious efficacy > 100Lm/W, complete with powder coated CRCA decorative box type batten suitable for surface mounting on wall, complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed. Make:- CG (Batten Cat No. DMLN 1 LT 8 -16 , Integtated LED tube Cat Ref LT8-20-865-2) or equivalent in Havells/ Philips as approved by GE.

Taking down existing u/s fitting and S&F LED 9/10Watt tube light fitting, surface mounting fitting for mirror light with slik and light weight batton, 240 Volt, with PF >0.95, efficacy >95 , colour temp 6500K complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed. Make:- Havells cat Part No. LHEXBQP7PN1W009 or equivalent in Philips/ Crompton/Bajaj and C&S as approved by GE.

Taking out u/s bulket fitting and S&F inIntegral LED security light luminaire of 25 W, comprising of pressure die cast housing with epoxy powder coated dark graphite grey colour finish, prismatic polycarbonate cover with individual LED lenses LED street light luminaires with IP 65 protection and with all fixing arangement , nuts, bolts and washer connecting to electric system with 4.0 sqmm PVC Aluminium stranded conductor 2 core of required length from light fitting to source including GI tube bracket fixed to wall with clamps, complete all as specified and directed at site. Make- Wipro Cat No. LR02-291-XXX-57-XX, or Equivalent in CG/ Philips/ Havells.

Taking down main switches/ MCB DBs of any capacity/ type including MCBs.

S&F sheet metal enclosure for VT DB TPN, MCCB DB TPN 4 way, double door with MCB 125 Amp , 30 KA,TP MCB as incomer (Vertical type double door, 125 Amps MCB rate inclusive) and suitable for SP/ TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge. : Make- Legrand/ Seimens/ Schinder.

S&F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 8 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge. Make- Legrand/ Seimens/ Schinder.

S & F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 4 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge. Make- Legrand/ Seimens/ Schinder.

S & F MCB SPN 5 to 40 amps 10 KA, C-series including connection with suitable size aluminium/ copper lugs complete all as specified and directed by Engr-In-Charge. Make- Legrand/ L&T/C&S

S&F MCB SP 240 volts 5 to 40 Amps, 10 KA breaking capacity, 'c' curve including connection with suitable size aluminium/ copper lugs complete all as specified and directed by Engr-In-Charge. Make- Legrand/ L&T/ C&S

Taking down existing u/s ceiling fans and S & F Ceiling fan of AC single phase 230/240 V of size 1200 mm sweep, BEE 5 star rated, ISI mark, energy efficient, 3 blade, white colour, including electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable including making provision for hanging of fan in ceiling complete all as specified and directed by Engr-In - Charge. Make: Crompton/ Bajaj/ Havells. Note: Old ceiling fans to be deposited in AGE E/M Yard.

S&F exhaust fan 380 mm sweep metal body complete with louvers including all civil work like cutting and making circular opening in existing wall of toilet etc, including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make: CG/ Havells/ Almorad.

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm×6mm thick, burried directly in ground (earth pit not less level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron earth wire of 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 SSR including earth pit in any soil char coal common salt , 15 mm all around earth plate PCC (1:3:6) type culprit, with 40x40x6 mm angle iron frame and PCC cover (1:2:4) type B1, water pipe funnel and GI protection pipe light grade 15mm dia upto panel connecting earth lead to panel all as specified and directed by EIC. Note: Earth continuity conductor including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate.

Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to end or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

Excavation in trenches nexc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/ loose for laying cables, erection of poles, complete all as specified.

Removing surplus excavated soil nexc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point.

M&L for Brick Sub Class 'B' locally available best quality laid in trenches above sand cushioning for cable protection complete all as specified.

Taking out old u/s cable and Supply and Laying XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 4 x 25 sqmm, laid in trenches/floor or fixed on wall/pole complete all as specified.

M&L for GI Tubes, 'light grade' galvanised, with all fittings and laid in floors, under road, pavement or hard standing steel water tubing bore of tube 40 mm.

Note for all items: All items shall be executed as specified and directed by Engr-in-charge.

M/s VIKAS TRADERS

RAJPATI CONSTRUCTION

PADAMSHRI CONSTRUCTION CO