Construction of Primary Health Centre Level-II building at Saryanj, Tehsil Arki Distt. Solan

Amount

Earth work in Excavation by mechanical mean (Hydraulic Excavator)/Manual Means in foundation and trenches or drains (not exceeding 1.50 meter in width or 10.00 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.50 meter, including getting out the excavated soil and disposal of surplus excavated soil as directed, with a lead of 50.00 meters.All kinds of soils/ordinary rock 50% (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used /removed as per the direction of the Engineer - in- charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respect including all incidental charges.

cutting in earth work in all heights and depths in all kinds of soil including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling wedging out of rock (where blasting is prohibited) and their intermediate classification of soil including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer -in-Charge at site. according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and un- useful material and transportation of the un -useful material for disposing at dumping site (to be arranged by the contractor) including payment of prescribed charges of dumping to be borne by the contractor to the satisfaction of Engineer- in -Charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour ,machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful material such as stones , shingles aggregate and slates shall be properly stacked at site and handed over to the department =231.57 cum qty. which shall be proportionately increased/decreased as the qty.of earth work recovered from the contractor @ 300/-cum (three hundred only) in all leads and lifts through all modes of transportation and used/removed as per the direction of Engineer-in-Charge. serviceable stones to be handed over to the department free of cost. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Excavation in earth work in all depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site., and according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful materials for disposing at dumping site (To be arranged by the contractor)including payment of prescribed charges of dumping to be borne by the contractor as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling , dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful materials such as stones, shingles aggregate and slates shall be properly stacked at site and handed over to the department free of cost to the maximum possible extent in all leads and lifts through all modes of transportation and used /removed as per the direction of the Engineer - in- charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Supplying and filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing Centering and Shuttering including strutting ,propping etc. and removal of form for floor to ceiling up to all heights and removal of the same:complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. In foundation, footings, bases of columns etc. and mass concrete.

walls (any thickness) partions and the like including attached pillasters buttresses, plinth and string courses and the like.

Suspended floors, roofs, landings,balconies and access platform. of any thickness in all floor level in all heights.

In lintels ,beams, plinth beams,girders,bressumers and cantilevers up to any depth in all floor level in all heights.

In columns, pillars, piers,Abutments,posts and struts. in all floor level in all heights.

In stair,(excluding landings) except spiral staircase in all floor level in all heights.

In edges of slabs and breaks in floors and walls under 20.00 (twenty centimeter) wide any width in all floor level in all heights.

Providing and laying cement concrete 1:5:10 (One cement : five sand : ten graded crushed hard stone aggregate 40 mm (Forty millimeter) nominal size) mechanically mixed ,vibrated and curing complete excluding cost of form work in foundation and plinth, as per HP. PWD. specifications of 1990 volume-I. including carriage of all labour, equipmments and materials to various location hrough all modes of transportation in all leads and lifts and all incidental charges.providing and laying cement concrete 1:5:10 (One cement : five sand : ten graded crushed hard stone aggregate 40 mm (Forty millimeter) nominal size) mechanically mixed ,vibrated and curing complete, excluding cost of form work in foundation and plinth,as per H.P.PWD specification 1990 valume-I, including carriage of all labour,equipments and materials to various location through all mode of transportattion in all leads and lifts and all incidental charges

Providing and laying cement concrete 1:4:8 (One cement : four sand : eight graded stone aggregate 40mm (Forty millimeter) nominal size) mechanically mixed,vibrated and curing complete excluding cost of centring and shuttering in foundation and plinths required complete and as per HP. PWD. specifications of 1990 volume-I. including carriage of all ,labour,equipments and materials to various location through all modes of transportation with in all leads, lifts, and other incidental charges.

Providing and laying cement concrete 1:3:6 (One cement : three coarse sand : six graded stone aggregate 40mm (forty millimeter) nominal size) mechanically mixed,vibrated and curing complete including cost of centring and shuttering in foundation and plinths,and in retaining walls all and breast walls all,complete and as per HP. PWD. specifications of 1990 volume-I. including carriage of all ,labour,equipments and materials to various location through all modes of transportation with in all leads, lifts, and other incidental charges.

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering,shuttering, finishing and reinforcement- all work up to plinth level: (a) cement concrete 1:2:4 (One cement : two course sand : four graded stone aggregate 20mm (twenty millimeter) nominal size) complete and as per HP. PWD. specifications of 1990 volume-I. including carriage of all ,labour,equipments and materials to various location through all modes of transportation with in all leads, lifts, and other incidental charges.

Providing and laying in position specified grade of reiforceed cement concrete, excluding the cost of centring, shuttering,finishing and reinforcement-all work upto plinth level.complete and as per HP. PWD. specifications of 1990 volume-I. including carriage of all ,labour,equipments and materials to various location through all modes of transportation with in all leads, lifts, and other incidental charges. 1:1.50:3 (one cement isto one point five course sand isto three graded stone aggregate 20.00 mm (twenty milimeter) nominal size.

Reinforced cement concrete work in walls (any Thickness) including attached pilasters, buttresses, plinth and string courses,fillets,columns, pillars,piers,abutments,posts and struts etc. above plinth level upto floor two level,excluding cost of centering, shuttering finishing and reinforcement: complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. 1:1.50:3 (One cement : one point five course sand: three graded stone aggregate 20 mm (twenty milimeter) nominal size.

Reinforced cement concrete work in beams, suspended floors,roofs having slopes up to 15o landings,balconies,shelves,chajjas,lintels, bands,plain window sills,staircases and spiral stair cases above plinth level upto floor five level,excluding the cost of centering, shuttering finishing and reinforcement with 1:1.50:3 (one cement isto one point five course sand isto three graded stone aggregate 20.00 (twenty milimeter) nominal size. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and laying upto all floor levels cement concrete work 1:1.5:3 (one cement isto one point five sand isto three graded stone aggregate 20mm. (Twenty millimeter) nominal size) , to give smooth and even surface including centring and shuttering but excluding cost of reinforcement and curing complete mechanically mixed and vibrated for compecting reinforced concrete upto floor all level including carriage of materials in all leads and lifts: Moulding as as in cornices, window sills etc. exceeding 15 cm in girth. including carriage of all labour equipments and materials to various location through all and as per direction of Engineer-in- Charge. Mouldings as in cornics windows sills etc.

Providing steel reinforcement for RCC work including straightening,cutting,bending,placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars.complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing smooth finishing of the exposed surface of RCC work with 6 mm (six milimeter) cement mortar 1:3 ( one cement isto three sand) including carriage of all labour equipment and materials to various lacations complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Applying cement slurry on RCC slab or cement concrete work using 2.75 kg of cement per square meter of floor area before laying cement concrete flooring including roughhening, cleaning of the concrete surface complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Brick work with common burnt clay E.P.S.(Non Modular) bricks of class designation 7.50 (seven point five zero) in superstructure above plinth level upto floor V level in all shapes and sizes in cement modular 1:6 (One cement : Six sand) complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Brick work with common burnt clay building bricks F.P.S (Non modular) bricks of class designation 7.50 (seven point five) in super structure above plinth level upto all floor levels in all shapes and sizes in cement mortar 1:6 (One cement : Six sand) complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Half brick masonry with common burnt clay F.P.S.(Non Modular) bricks of class designation 7.50 (seven point five zero) in superstructure above plinth level upto all floor five levels in cement mortar 1:4 (1 cement : 4 sand).complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Half brick masonry with common burnt clay F.P.S.(Modular) bricks of class designation 7.50 (seven point five zero) in superstructure above plinth level upto floor five levels in cement mortar 1:4 (1 cement : 4 sand).complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Boulder filling under floor tightly hand packed including ramming, watering consolidation with all leads and lifts,complete including carriage of materials labour ,tool and plants through all modes of transportation as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Random rubble masonry/polygonal rubble masonry (uncoursed/ brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concret 1:6:12 (one cement isto six sand isto twelve graded stone aggregate 20 mm (twenty milimeter) nominal size ) at plinth level in cement mortar 1:6 (One cement : Six sand) complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth retaining walls/breast walls including raking out joints in:-Cement Mortar 1:4 (one cement is to four Sand) including carriage of materilas within all leads and lifts by al means and other incidentals and as per the direction of Engineer-in-charge.

Providing back filling behind abutments, wing wall and retaing walls of granular materials complete as per drawings and technical specification MORD clause 1204.3.8 complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Providing weep holes in brick masonry/stone masonry,plain reinforced concrete abutment,wing wall, return wall with 100 mm (one hundred milimeter) diameter PVC pipe extended thrugh full width of structure with slope of 1:20 (one vertical isto twenty horizontal) t towards the drawing face complete as per HP. PWD. technical specifications clauses 614,709,1204.3.7 including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Preparation of sub grade by dressing to camber (Earth work) for the cutting involved for sub-grade to be paid for separately depending upon the classification of soil complete as per H.P.PWD. Specifications incluing carriage of materaals in all leads and lift as per direction of Engineer-in-Charge.

Consolidation of sub-grade with power road roller including making the undulation etc. with earth or quarry soil etc. and re-rolling the sub-grade complete as per H.P.PWD specification including carriage of materials with in all leads and lift and as per the direction by the Engineer-In- charge

Providing, laying, spreading and compacting stone aggregates of specific sizes 90mm to 45mm(ninty millimetre to forty five millimetre) grading- I 100 mm (hundred millimtre) Consolidated thick to water bound macadam specification including spreading in uniform thickness, using template, hand packing, rolling with three wheel 80-100 kN (Eigty to hundred) static roller in stages to proper grade and camber, applying and brooming, stone screening type -B of size 13.2 mm (thirteen point two millimtre) nominal size at the rate 0.27 cum.(Zero point twenty seven cubic metre) and binding materials at the rate 0.08 cum. (zero point zero eight cubic metre) per 10 square metre (ten) and to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD Technical Specification Clause 405.. By mechnical means and as per intire satispection direction by the Engineer-In-Charge. including carriage of materials in all leads and lifts

Providing, laying, spreading and compacting stone aggregates of specific sizes 63mm to 45mm(sixty three millimetre to forty five millimetre) grading- II 75 mm (seventy five millimtre) Consolidating thick to water bound macadam specification including spreading in uniform thickness, using template, hand packing, rolling with three wheel 80-100 kN (Eigty to hundred) static roller in stages to proper grade and camber, applying and brooming, crushable screening type -B of size 11.2 mm (eleven point two millimtre) nominal size at the rate 0.20 cum.(Zero point twenty cubic metre) and binding materials at the rate 0.06cum. (zero point zero six cubic metre) per 10 square metre (ten) and to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading as per MORD Technical Specification Clause 405.. By mechnical means and as per intire satispection direction by the Engineer-In-Charge. including carriage of materials all leads and lifts

Providing, laying, spreading and compacting stone aggregates of specific sizes 55 mm to 22.4mm(fifty three millimetre to twenty point four millimetre) grading- III 75 mm (seventy five millimtre) Consolidating thick to water bound macadam specification including spreading in uniform thickness, using template, hand packing, rolling with three wheel 80-100 kN (Eigty to hundred) static roller in stages to proper grade and camber, applying and brooming, stone screening type -B of size 11.2 mm (eleven point two millimtre) nominal size at the rate 0.18 cum.(Zero point eighteen cubic metre) per 10 square metre (ten) and to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD Technical Specification Clause 405.. By mechnical means and as per intire satispection direction by the Engineer-In-Charge. including carriage of materials all leads and lifts

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared sufaces of granular base including cleaning the road suface hydrolic broom and spraying primer at the rate of 0.85 kg /sqm( Zero point eight five ) using mechanical means as per MORD Technical Specification Clause 502 (Five hundred two) ncluding carriage of materials with in all leads and lifts as per the direction of Engineer-In- Charge.

Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275( Zero point two seven five kilogram ) per square metre on the prepared granular surfaces treated with primer and cleaned with hydraulic broom as per MORD techanical specification Clause 503 ( Five hundred three) including carriage of materials with in all leads and lifts as per the direction of Engineer-In- Charge.

Providing, laying and rolling open graded premix carpet of 20 mm (Twenty millimeters) completed thickness composed of 13.20 mm. to 5.6 mm. (Thirteen point Two millimeters to Five point Six millimeters) course stone aggregate at the rate 0.27cum(Zero point two seven ) cubic metre mixed with 14.6 Kg ( fourteen point six ) kilogram per 10 sqm(ten ) bitumen VG-10( viscosting grade ten) to required line, grade and level to serve as wearing course on a previousl prepared base, including mixing and heating binder and aggregate in a suitable hot mix plant 30/40( thrity oblic forty) tonne per hour capacity transporting mixed material and laying with paver finisher and rolling with a three wheel 80-100 kN capacity static road roller, finished to required level and grades to be followed by seal coat of Type –B- as per MORD Technical Specification Clause 508 (Five hundred Eight), and entire stasification of Engineer-In- Charge including carriage of materials in all leads and lifts.

Providing and laying seal coat for sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type-B as per MORD Technical Specification Clause 510 (Five hundred Ten) using VG-10 ( viscosting grade-10 ) at the rate 6.80 Kg ( Six point eight kilogram ) premixed with 0.06 ( Zero point zero six ) cubic metre of fine aggregat per10( ten ) squaremetre by mechnical means and rolling with power road roller 8-10 ( eight to ten ) tonne capacity including carriage of materials, labour and equipments to various location of site of work through all modes of transportation By Mechanical Means including carriage of materials in all leads, lifts and as per the direction of Engineer-In- Charge.

Providing and fixing factory made flush door 35 mm (thirty five milimeter) thick commercial both sides i.e. non decorated phenol bounded termite resistant and water proof core of block board construction with full frame of Ist class deodar wood and well matched comercial three ply veener with vertical grain of cross bans and face veener on both faces of flush door shuter IS No: 2202 of century ply board (I0 ltd or its equivalent including black enameled MS iron butt hinges with necessary screws : 35 mm thick (Thirty five) complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing wire gauge shutters using galvanised MS wire gauge of IS gauge designation 85 G with wire of dia 0.56 mm (zero point fifty six milimeter) for doors, windows and clearstory windows including first class deodar wood ornamental beading 20 mm x12.50 mm(twenty into twelve point five milimeter) section including bright finished black enamelled iron butt hinges with necessary screws (a) 40 mm thick (forty milimeter) second class deodar wood complete. as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 19mm (nineteen milimetre) thick commercial board water proof shutter for cup boards with nickel plated piano hinges fixed with nails and screws etc., complete as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction/ direction of the Engineer-in-Charge.

Providing and fixing 19mm (nineteen milimetre)thick water proof commercial board in shelves /box for cup boards with butt joints and fixing with nails and screws etc complete complete as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction/ direction of the Engineer-in-Charge.

Providing and fixing 6mm thick ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing decorated high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and revers side of adhesive bonding quality conforming to IS : 2046 type -S,including the cost of adhesive of approved quality. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. 1.00 mm thick (one milimeter)

Providing and fixing square edges first class deodar wood lipping/cover fillets (beading) 19 mm x 6 mm (Nineteen millimeter into six millimeter) section complete in as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing M.S. grills of required patterns in frames of windows etc. with M.S.flats, square or round bars including priming coat with approved steel primer all complete fixed to steel windows by weldings etc.fixed to steel windows by welding etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 20 mm diameter (twenty milimeter) Chromium plated brass curtain rod having wall thicness of 1.25 mm (one point twenty five milimeter) with two chromium plated brass brackets fixed with CP brass screws and PVC sleeves etc. wherever necessary . complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing MS sliding door bolts, with nuts and bolts etc. complete for all floors, including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. 300 X 16 mm

Providing and fixing powder coated aluminium tower bolts ,(Berrel type) transperent or dyed to required colour or shade, with nuts and screws etc. complete for all floors, including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge 250 X 10 mm

Providing and fixing powder coated aluminium handles, transperent or dyed to required colour or shade, with nuts and screws etc. complete for all floors, including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge 125mm

Providing and fixing powder coated aluminium hanging floor door stopper ISI marked with transparent or dyed to required shade and colour with necessary secrews etc. complete to suit shutter thickness complete (i) Twin rubber stopperas per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing aluminium die cast body tublar type universal hydraulic door closer (having brand logo with ISI, IS : 6564, enbossed on the body, door weight upto 35 kg (Thirty five kilograme) and door width upto 700 mm ( seven hundred milimeter) with necessary accessories and screws etc. complete and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters,including fixing with necessary screws etc. complete (i) Double strip (horizontal type).as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 115 mm (one hundred fifteen milimeter) bright finished brass haps and stapples (safety type) with necessary screws etc.complete as per HPPWD specification 1990 volume-I ( One ) including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing special quality bright finished brass cup board or ward robe locks with six levers of approved quality including necessary screwss etc. complete as per HPPWD specification 1990 volume-I ( One ) including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 50 mm CP brass cup board or ward robe knob with necessary screwss etc. complete as per HPPWD specification 1990 volume-I ( One ) including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 150 mm (one hundred fifty milimeter) MS single acting spring hinges bright finished with necessary screws etc. complete as per HPPWD specification 1990 volume-I ( One ) including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 150 mm (one hundred fifty milimeter) MS Double acting spring hinges bright finished with necessary screws etc. complete as per HPPWD specification 1990 volume-I ( One ) including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing glass panes with putty and glazing clips in steel doors,windows,clearstory windows, all complete with 4.00 mm (four milimeter) thick glass panes complete as per HPPWD specification 1990 volume-I ( One ) including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 (fifty) micron work for door, window, ventilators and partitions with extruded built up standard tubular section/appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixing with dash fastners of required dia and size, including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically where ever required including cleat angle,aluminium, snap beading for glazing/panelling, C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge (glazing paneling and dash fastners to be paid for separately) as per HPPWD specification 1990 volume-I ( One ) including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.(a) For frames of door and window.

For shutters of doors windows and ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of EPDM/rubber/neoprene gaskets as required. (fittings shall be paid for separately) including carriage of materials within all leads and lifts.complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.Powder coated aluminium (minimum thicness of powder coating 50 (fifty) micron)

Providing and fixing 12 mm (twelve milimeter) thick PHENOL BONDED prelaminated partical board flat pressed three layer or graded wood particle board confirming to IS: 12823 grade I tytpe II, in panelling fixed aluminium doors, windows shutters and partition frames with CP brass/stainless steel screws etc. complete as per architectural drawings and directions of engineer in Charge including carriage of materials within all leads and lifts.complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.(i) Pre laminated particle board with decorated lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with EPDM/ rubber/neoprens gasket etc. complete as per the architectural drawings and complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Chargee (cost of aluminium snap beading shall be paid in basic item.) including carriage of materials within all leads and lifts.(i) 4.00 mm (four nmilimeter) thick glass panes

Providing and fixing all weather proof ACP imported sign panel all weather proof multi coloured computerised reflective digital panel 3 mm (three milimeter) thick mounted on powder coated GI frame work fixed/hanging with wall or ceiling etc. with specified clamps and GI wires and rawl plugs etc.complete and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Chargee (cost of aluminium snap beading shall be paid in basic item.) including carriage of materials within all leads and lifts.

Cement concrete flooring 1:2:4 ( one cement isto two course sand isto four graded stone aggregate 20 mm , (twenty milimeter) nominal size laid in one layer finished with a floating of neat cement, etc. complete.as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. 40 mm (forty milimeter) thick.

Providing and lfixing mirror polished Kota stone slab flooring of size 55x55 CM (fifty five into fifty five centimeter) over 20mm (twenty milimetre ) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab,including rubbing and polishing complete with base of cement mortar 1:4 (one cement isto four sand) complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. 25 mm (Twenty five milimeter) thick.

Providing and fixing mirror polished 20 mm thick (twenty milimeter) Kota stone slab of size 55x55 Cm (fifty five into fifty five centimeter) in risers of steps , skirting,dado and pillars laid on 12 mm (average) thick base of cement mortor 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Extra for pre finished nosing in treads of step of kota stone/sand stone slab complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Extra for kota stone/sand stone in treads of steps and risers using single length up to 1.20 meters (one point two zero) complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing Hydraulically compressed and polished terrazzo tiles 20 mm thick (twenty milimeter) ISI marked No IS 1237 of approved shade laid laid floors, treads of steps and landings on a bed of 25 mm average thickness of cement mortor 1:6 ( 1 cement : 6 sand) in the ratio of 50% (fifty percent) white and 50% (fifty percent) grey cement jointed with neat cement slurry mixed with pigment to match the shade of tiles ( where ever required) including rubing and polishing complete with tiles of following shades (a) Medium shade complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing Hydraulically compressed and polished terrazzo tiles 20 mm thick (twenty milimeter) ISI marked No IS 1237 of approved shade in skirting,risers of steps on a bed of 10 mm average thickness of cement mortor 1:3 (one cement isto three sand) in the ratio of 50% (fifty percent) white and 50% (fifty percent) grey cement jointed with neat cement slurry mixed with pigment to match the shade of tiles ( where ever required) including rubing and polishing complete with tiles of following shades (a) Medium shade complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and laying double charged vetrified floor tiles of size 60x60 CM (Sixty into sixty centimeter) (thickness to be specified by the manufracturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick (twenty milimeter) cement mortar 1:4 (one cement is to four sand) jointed with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and laying double charged vetrified tiles of size 60x60 CM (Sixty into sixty centimeter) (thickness to be specified by the manufracturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, in skirting,riser of steps,over 12 mm thick (twelve milimeter) bed of cement mortar 1:3 (one cement is to three sand) jointed with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and laying ceramic glazed tiles of size 400x400 mm (four hundred into four hundred milimeter) (thickness to be spefied by the manufacturer) of first quality confirming to IS: : 15622 of approved make or colours such as white,lvory,grey,fume red brown, laid on a bed of 20 mm thick (twenty milimeter) cement mortar 1:4 (1 sand: 4 sand) jointed with grey cement slurry @ 3.30kg/sqm including jointing the joints with white cement and matching pigment etc. complete and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and laying Ist quality white/ coloured glazed wall tiles30x45 (thirty into forty five centimeter) confirming to IS: 15622 (thickness to be specified by the manufacturer), of approved make,in all colours ,shades, except burgundy, bottle green, black of any size as approved by Engineer in charge, in skirting,risers of steps and dados, over 12 mm thick (twelve milimeter) bed of cement mortar 1:3 (one cement isto three sand) and jointing with grey cement slurry @ 3.30 kg (three point three zero kilograme) per sqm, including pointingin white cement mixed with pigment of matching shade complete and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge:-

40 mm thick (forty milimeter) red mandana sand stone in flooring/skirting over 20 mm (twenty milimeters) average thick base of cement mortar 1:5 (one cement isto five sand) with joints 3.00 mm (three milimeters) thick, side buttered with cement mortar 1:2( one cement isto two stone dust) admixed with pigment to match the shade of stone and pointed with same mortar. Red sand stone complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 20 mm thick (twenty milimeter) gang saw cut, mirror polished, premoulded and prepolished machine cut for kitchen plat forms, vanity counterss, window sills, facias and similar locations of required size, approved shade,colour and texturte laid over 20 mm thick (twenty milimeter) base of cement mortar 1:4 ( one cement isto four sand) join treated with white cement mixed with with matching pigment, epoxy touch ups,,including rubbing, curring,moulding and polishing to edges to give high gloss finish etc.copmlete at all levels. (a) Baroda green marble.complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge:-

Providing and fixing edge moulding to 20 mm thick (twenty milimeter) marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge:-

Extra for fixing marble/granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm (one hundred fifty milimeter) with epoxy resin based adhesive, including cleaning etc. complete and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 0.60mm thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia metre with prepainted limpet and rubber washers complete with all accessories as required as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing ridges or hips 60 cm over all with 0.45mm thick prepainted steel sheets of TATA DURASHINE in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating+ back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6 mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge.0.60 mm (zero point sixty milimeter) thick sheet

Providing and fixing valley 90 cm overall 0.45 mm thick prepainted steel sheet of TATA DURASHINE in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing flushing 38 cm overall with 0.45mm thick prepainted steel sheets of TATA DURASHINE in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 30 cm (thirty centimeter) wide and 120 cm (one hundred twenty centimeter) overall box type gutter with 0.45 mm (zero point forty five) milimeter prepainted steel sheet of TATA Durashine gutter 40x3 mm (forty into three milimeter) size bolts and nuts and washers etc. including making conection with rain water pipe complete as per design including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. 0.45 mm (Forty five milimeter) thick with prepainted steel sheet.

Providing and fixing 150 mm diameter on wall faces PVC (D-Plast) for rain water pipes of working pressure not less than 4.50 kg/sqm including filling the joints with approved adhesive complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 150 mm (One hundred fifty milimetres) dia.on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. 150 mm ( one hundred milimeter) dia PVC door bend

150 mm ( one hundred milimeter) dia PVC plain bend

150 mm ( one hundred milimeter) dia PVC plain shoe

Providing and fixing PVC finolex clamps ISI marked of approved design with steel screws and rawal plugs etc. complete and as per HP. PWD. Specifications of 1990 vplume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. 150 mm (one hundred fifty milimeter) diameter

Providing and fixing M.S. B.P. sheet 2 mm thick in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete (Base members of steel work shall be measured & paid separately) as per HP. PWD. Specifications of 1990 vplume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Structural Steel work including section riveted,bolted or welded in built up sections, trusses and framed work including cutting,hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. and as per HP. PWD. Specifications of 1990 vplume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. In truss and trussed purlins in buildings and in beams joints channels,angles,tees,flats with connecting plates oor angle cleats as in main and cross beams,hip and jack rafters, purlins connected to common rafters and the like.

Sructural steel work including hollow sections riveted, bolted or welded in built up section trusses and framed work, including cutting,hoisting and fixing in position and applying priming coat of approved steel primer all complete. as per HP. PWD. Specifications of 1990 vplume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. In gratings, framed, guards, bars ladders and railing, brackets, ornamental brackets decorative MS screen gates and similar works.

providing Steel work of TATA SAIL or RASHTRIYA ISPAT welded in built up section/hollow section trusses and framed work, including cutting,hoisting fixing in position and applying a priming coat of red lead paint in beams joints channels, angles, tees,flats/hollow section with connecting plates or angle cleats as in main and cross beams ,hips and jack rafters,purlins connected to common rafters and the like and as per HP. PWD. Specifications of 1990 vplume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing in position collapsible steel shutters with vertical channels 20 mm X10 mX2mm and braced with flat iron diagonals 20 mm X5 mm size with top and bottom rails of T.iron 40 mm X40 mm X6 mm with 38 mm dia steel pulley complete with bolts and nuts locking arrangements, stoppers,handles,including applying a priming coat of red lead paint including carriage of materials within all leads and lifts.

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete including carriage of materials within all leads and lifts.

Providing and fixing hand rail of approved size weldeing etc. to steel ladder railing, stair case railing and similar works including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely including carriage of materials within all leads and lifts. (i) MS tube

Providing and fixing angle iron in door,widow,clearstory window frame manufactured from mild steel iron section including hinges,jambs,lock jamb bead,and if required angle thrashold of mild steel single rebate angle of 40x40x5 mm (forty into forty into five milimeter) thickness including hinges,jambs,lock jamb bead and if required angle thrashold of mild steel angle 50x25 mm ( fifty into twenty five milimeter) welded or rigidly fixed by mechanical means, lugs with splint and tails to each jamb including steel but hinges 2.50 mm thick (two point five zeri milimeter) with provision for locking arrangment and shock absorber as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer in Charge complete.as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing double rebate door frame manufactured from ISLC 125 mm (one hundred twenty five milimeter) with MS flat 125x4 mm (one hundred twenty five into four milimeter) for centre frame and MS hollow section for rebate 40x20 mm (forty into twenty milimeter) and 2.00 mm (two milimeter) thick welded together for making rebate including MS flat holfast 30cm (thirty centimeter) long and 4.0 mm (four milimeter) thick embeded in cement concrete block 1:3:6 (one cement isto three sand isto six graded stone aggregate forty milimeter nominal size) as per design and drawing including jambs,lock. (a) side/end frame as directed by the Engineer in Charge complete.as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

(b) Centre/ mullion frame as directed by the Engineer in Charge complete.as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing steel windows and ventilators frames manufactured of channel section 75x40 (Seventy Five into forty) milimeters for end frame and for centre frame channel section 75x40 (seventy five into forty) milimeters with mild flat in combination welded together to make one frame with making square steel section with mild steel flat of 20*4(Twenty*Four) milimeters and 12*4 (Twelve *Four) milimeters, shutters of rlled steel section F-7B (Seven B) section including glass panes of 4.00 mm (four ) milimetres thick in glazed panel and wire gauge of designation 85 (Eight five) with wire of 0.56 (Zero point five six) milimeters dia in wire gauge panel and fixed glazing fixed with angle and T section of 25*25*3 (Twenty five into Twenty five into Three) milimeters and mild steel flat of 12x4(Twelve into Four) milimeters in sash bars duly welded of all corners and joints properly, hold fast of mild steel flat 200 x50 x5(Two hundred into Fifty into five) milimeters dulywelded at corner and joints of all steel section, embeded in cement concrete block 1:3:6 (one cement isto three coarse sand isto six graded crushed stone aggregate twenty milimeters nominal size) of size (100 x100 x100 (One hundred into One hundred into One hundred) milimeters , nominal size of One hundred into one hundred into one hundred) including providing and fixing of fittings that is handles, tower bolts, hooks and eyes and applying a coat of primer with red lead paint and fixing in position complete in all respect and as per Architectural drawing and direction of the Engineer-in-Charge and HP,PWD,Specification 1990-Volume-I including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.nd applying a coat of primer with red lead paint and fixing in position complete as per drawing,direction of the Engineer-in-Charge and HP,PWD,Specification 1990-Volume-I including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.

Providing and fixing MS hollow pipe in vertical posts 100 mm (one hundred milimeter) diameter welded in straight length over MS flat at topp of vertical balusters including one coat of red oxide priming coat complet and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Painting steel work with deluxe multi surface paint to give an even shade . two or more coat applied @ 0.90 leters/ ten square meter over and under coat of primer applied @ 0.80 letre per ten square metre of approved brand and manufacture omplete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting complete. with readymixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Painting wood work with deluxe multy surface paint of required shade, two or more coate applied @0.90 ltr. per ten square meter over and under coat of primer applied @ 0.75 ltr. per ten square meter of approved brand and manufacture.complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

6mm ( six milimetre ) cement plaster 1:3 ( One cement isto three coarse sand ) finished with a floating coat of neat cement and thick coat of lime wash on top complete. and as per HP.PWD., specification 1990 Volume-I ( one )including carriage of all labourequipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

15 mm (fifteen milimetre) cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrses,internal rounded angles,chamfers and / or rounded angles not exceeding 30 cm (thirty centimeter) in girth and finished even and sand papered smooth in cement mortar 1:6 (One cement isto six fine sand): complete as per HP.PWD., specification volume-I (one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge

15 mm (fifteen milimetre) cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrses,internal rounded angles,chamfers and / or rounded angles not exceeding 30 cm (thirty centimeter) in girth and finished even and sand papered smooth in cement mortar 1:4 (One cement isto four fine sand): complete as per HP.PWD., specification volume-I (one ) including carriage of all labour equipment and materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge

15 mm (fifteen milimetre) cement plaster in single coat as pattern shown in elevation of Arch drawing with 12 mm (twelve milimeter) groove in interval of 25 cm (twenty five centimeter) centre to centre on the fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrses,internal rounded angles,chamfers and / or rounded angles not exceeding 30 cm (thirty centimeter) in girth and finished even and sand papered smooth in cement mortar 1:6 (One cement isto six fine sand): complete as per HP.PWD., specification volume-I (one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

15 mm (fifteen milimetre) cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrses,internal rounded angles,chamfers and / or rounded angles not exceeding 30 cm (thirty centimeter) in girth and finished even and sand papered smooth in cement mortar 1:6 (One cement isto six fine sand): complete as per HP.PWD., specification volume-I (one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Plastering done in single coat mouldings, cornics or archtraves including neat finish to line and level in cement mortar 1:3 (One cement isto three sand): complete as per HP.PWD., specification volume-I (one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Applying priming coat on new concrete/plastered surface after and including preparing the surface by throughly cleaning oil, grease,dirt and other foregn matter and sand papering as required with ready mixed primer. complete as per HP.PWD., specification volume-I (one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Painting with satin enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new works complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Distempering on undecorated walls/ceiling with first quality acrylic distemper (ready mixed) having VOC ( volatile organic compound) content less than 50 gms/litre (fifty grame) of approved manufacturer, of required shade and colour complete Two or more coats on new works, as per manufacturer's specification including entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.

wall/ceiling painting with acrylic emulsion paint of approved brand and manufacture to give an even shade two or more coats on new works, as per manufacturer's specification including entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.

Finishing walls with acrylic smooth exterior grade paint of required shade brand and manufacture for interior grade on undecorated on cret/stone/platered wall surfaces to give an even shade including throughly brushing the surface free from mortar droping and other foreign and sand paper smooth including applying of putty a required for metling the surface complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. (i) new work (two or more coats applied @ 1.67 letres/ per 10.00 square meter over and including primer coat of exterior primer applied @ 2.20 kg per ten square meter.

providing and applying white cement based putty of average thuickness 1.00 mm (one milimeter) of approved brand and manufacturer, overb the plastered wall surface to prepare the surface even and smooth complete and as per HP.PWD.,specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Making plinth protection 50 mm thick (fifty milimeter) of cement concrete1:3:6 (one cement isto three coarse sand (zone-III) isto six graded stone aggregate 20 mm (Twenty milimeters) nominal size over 75 mm (seventy five milimeter) thick bed of dry brick ballast 40 mm (forty milimeter) nominal size, well rammed and consolidated and grouted with fine sand,including necessary excavation, levelling and dressing and finishing the top smooth. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and laying heavy duty precast cement concrete inter locking paver blocks vibro compacted upto 50 mm (fifty milimeter) grade including border or kurb block grey or coloured over sub base of concrete with 25 mm (twenty five milimeter) thick average thickness of cement mortar 1:4 (one cement isto four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curring rubbing and polishing complet. sub base concrete floor to be paid for separately. 60 mm (sixty milimeter) thick inter locking block complete and as per HP,PWD specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

providing and fixing GI pipes complete with GI fittings including trenching and refilling etc. 15 mm (fifteen milimeter) dia nominal bore complete and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

providing and fixing GI pipes complete with GI fittings including trenching and refilling etc. 20 mm (twenty milimeter) dia nominal bore complete and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

providing and fixing GI pipes complete with GI fittings and clamps including making good the wall etc. connecting pipe, including painting with anticrrosive bitumastic paints,cutting chases and making good the wall. 15 mm (fiftenny milimeter) dia nominal bore complete and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

providing and fixing GI pipes complete with GI fittings and clamps including making good the wall etc. connecting pipe, including painting with anticrrosive bitumastic paints,cutting chases and making good the wall. 20 mm (twenty milimeter) dia nominal bore complete and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Making connection of GI distribution branch with GI main of following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete. 25mm to 40mm (tweny five into forty milimeter) nominal bore complete and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Fixing water metre and stop cock inGI pipe line including cutting and threading the pipe and making long secrews etc. complete. (cost of water meter and stop cock to be paid for separately) 20 mm (twenty milimeter) nominal bore as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge..

Providing and placing on trace (at all floor levels) polyethylene water storage IS: 12701 marked, with cover and suitable locking arrangement and making neceassry hole for inlet, outlet and overflow pipes but without fittings and the base support for tank comlete (i) 6000 litre (six thausand litres) net capacity tank . complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Constructing masonry chamber 300mm x 300mm x 500mm ( three hundred milimetre into three hundred milimetre into five hundred milimetre ) inside, in brick work in cement mortar 1:4 (one cement isto four coarse sand) for stop cock, with CI surface box 100x100 x75 mm (one hundred milimeter into one hundred milimeter into seventy five milimeter) (inside) with hinged cover fixed in cement concrete slab1:2:4 ( one cement isto two coarse sand isto four graded crushed stone aggregate 20mm nominal size ), including necessary excavation, foundation concrete 1:5:10 ( one cement isto five coarse sand isto ten graded stone aggregate 40 mm (forty milimeter) nominal size and inside plastering with cement mortar 1:3 ( One cement isto three coarse sand) 12 mm (twelve milimeter) thick,finished with a floating coat of neat cement complete as per standard design. with common burent clay F.P.S. (non modular) bricks of class designation 7.50.complete and as per HPPWD., specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing polytheline-Aluminium polythylene (PE-AL-PE) composite pressure pipes confirming to IS-15450-U.V. stabilized with carbon black having thermal stability for hot and cold water supply,capable to with stand temerature up to 80o C, including all special fittings of composite materials (engineering plastic blend and brass inserts wherever required) example elbows,tees,reducers,couplers and connectors complete including carriage of materials upto all leads and lifts as per the direction of the Engineer-in-Charge. (a) Internal work-Exposed on wall. (i) 1216 ( 16mm sixteen milimetre O.D. pipe). INTERNAL WORK EXPOSED ON WALL 1216 mm (16 mm O.D.Pipe) INTERNAL WORK EXPOSED ON WALL

1620 mm (20 mm O.D.Pipe)

Providing and fixing polytheline-Aluminium polythylene (PE-AL-PE) composite pressure pipes confirming to IS-15450-U.V. stabilized with carbon black having thermal stability for hot and cold water supply,capable to with stand temerature up to 80o C, including all special fittings of composite materials (Engineering plastic blend and brass insets wherever required) e.g. elbows,tees,reducers,couplers and connection etc,with clamp at 1.00 meter spacing. this includes the cost of cutting chases and including testing of joints complete. including carriage of materials upto all leads and lifts as per the direction of the Engineer-in-Charge. Concealed work,including cutting chases and making good the wall etc. 1216 mm (16 mm O.D.Pipe)

1620 mm (20 mm O.D.Pipe)

Providing and fixing polytheline-Aluminium polythylene (PE-AL-PE) composite pressure pipes confirming to IS-15450-U.V. stabilized with carbon black having thermal stability for hot and cold water supply,capable to with stand temerature up to 80o C, including all special fittings of composite materials (Engineering plastic blend and brass insets wherever required) e.g. elbows,tees,reducers,couplers and connection etc,with trenching,refilling and testing of joints complete. including carriage of materials upto all leads and lifts as per the direction of the Engineer-in-Charge. External work. 1216 mm (16 mm O.D.Pipe)

1620 mm (20 mm O.D.Pipe)

Providing and fixing 150 mm (one hundred fifty milimeter) high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing (110mm (one hundred ten milimeter) high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion as per within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing (150 mm (one hundred fifty milimeter) PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing 110mm (one hundred ten milimeter) PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing 150 mm (one hundred fifty milimeter) PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing 110mm (one hundred ten milimeter) PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing 150 mm (one hundred fifty milimeter) PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete. as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing 110mm (one hundred ten milimeter) PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete. as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing 150 mm (one hundred fifty milimeter) PVC collars ISI marked including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing 110mm (one hundred ten milimeter) PVC collars ISI marked including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing 150 mm (one hundred fifty milimeter) PVC plain bend ISI marked including fixing with approved adhesive etc. complete. as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing 110mm (one hundred ten milimeter) PVC plain bend ISI marked including fixing with approved adhesive etc. complete. as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing 150 mm (one hundred fifty milimeter) PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete.as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing 110mm (one hundred ten milimeter) PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete.as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing PVC floor traps ISI marked of self cleaning design with PVC pipe complete including cost of cutting and making good the wall and floors etc,110 mm inlet and 90 mm outlet complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 150 mm (one hundred fifty milimeter) PVC cowl ISI marked including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 110mm (one hundred ten milimeter) PVC cowl ISI marked including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 150 mm (one hundred fifty milimeter) PVC double equal branch ISI marked with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing 110 mm (one hundred ten milimeter) PVC plain double equal branch ISI marked with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing 150 mm (one hundred fifty milimeter) PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing 110 mm (one hundred ten milimeter) PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing 150 mmx 110 mm (one hundred fifty milimeter into one hundred ten milimeter) dia PVC reducer ISI marked including jointing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing 110 mmx 90 mm (one hundred ten milimeter into ninety milimeter) dia PVC reducer ISI marked including jointing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing 110 mm (one hundred ten milimeter) PVC ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc.complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing soil, waste and ventilating pipes including filling the joints with approved adhesive complete as per HPPWD., specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge. 100 mm (one hundred milimeter diameter) sand cast iron S&S pipes as per IS: 1729

Providing and fixing bends of required degree (any radious) with oval access door insertion rubber washer 3.00 (three) milimetre thick, bolts and nutts complete supreme fittings and accessories complete. 100 mm (one hundred milimeter diameter) sand cast iron S&S pipes as per IS: 1729

Cutting chase in stone/brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the the same with cement concrete 1:3:6 (one cement isto three sand isto six graded stone aggregate 12.50 mm (twelve point five milimeter) nominal size complete . 100 mm (one hundred milimeter) diameter as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing white vitreous china water closet squatting pan (Indian Type W.C. pan) with 100 mm sand cast iron P or S traps, 10.00 letre low level white PVC flushing cistern,including flush pipe, with manually controlled device (handle lever) confirming to cera cat No 2071, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge . Orrissa pattern WC pan of size 580x440mm.(five hundred eighty into four hundred forty milimeter)

Providing and fixing white viterous China European Type wash, down water closet pan including PVC low level 10.00 letre capacity dual flushing including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 sand) seat and cover to be paid for separately. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. European type WC pan No 2061 or equivalent (PRIMA) of CERA

Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) confirming to IS: 7231 with all fittings and fixure complete. 10.00 ltr (ten litres capacity) complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge..

Providing and fixing wash basin with C.I. brackets 15 mm CP brass pillar taps, 32 nmm CP brass waste of standared pattern,including painting of fittings and brackets, cutting and making good the walls wherever required: complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. White vitreous china flat back wash basin of cera no 1025 size 550x400 mm with single 15 mm CP brass pillar tap.

Providing and fixing stainless steel kitchen sink of approved standard I.S. marked with drain board and C.P. waste with C.I. or M.S. brackets, painted white including cutting hole in walls and making good the same butt excluding fitting including carriage of material up to all leads and lifts and as per the direction of Engineer-in-Charge. supper duplex No 6321 mat finish of diamond with drai board

Providing and fixing white vitreous china laboratory sink with C.I. brackets, CP brass chain with rubber plugs, 40 mm (forty milimeter) CP brass waste and 40 mm (forty milimeter) CP brass trap with necessary CP brass union complete including painting of fittings and brackets,cutting and mking the walls wherever required including carriage of material up to all leads and lifts and as per the direction of Engineer-in-Charge. lab sink cat no 50001 of size 450x300x150 (four hundred fifty into three hundred into one hundred fifty) of hindware.

Providing and fixing GI inlet connect for flush pipe connecting with WC pan complete. including carriage of material up to all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing plastic seat (Solid type) with lid for pedestal type WC pan complete. including carriage of material up to all leads and lifts and as per the direction of Engineer-in-Charge. White solid plastic seat with lid

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm( five hindred eighty into three hundred eighty into three hundred fifty milimeters) with white PVC outomatic flushing cistern,with fittings,standard size CP brass flush pipe, spreadrs with unions and clamps. (all in CP brass) with waste fittings as per IS:2556, CI trap with out let grating and other couplings in CP brass, including painting of fittings and cutting and making good the walls anfd floors wherever required: complet. as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. flat back urinal large No 60002 of Hindware with 5.00 ltr (five litres) PVC automatic flushing cistern.

Providing and fixing white vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings . Pedestel of Hindware or its Equivalent of approved shde. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing C.P. Brass waste (heavy duty ISI Marked IS : 8931 and 8934 for wash basin or sink (i) 32mm dia complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete (i) 32mm dia flexible pipe and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing 100mm (one hundred milimeter) sand cast iron grating for gully, floor or Nahni trap Chromium Plated ISI marked IS No.8934 of Jal /ESS or its Equivalent.

Providing and fixing 600mm x 450mm ( six hundred milimetre into for hundred fifty milimetre ) bevelled edge mirrior of superior glass (of approved quality) complete with 6mm (six milimeter ) thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete as per HP.PWD., specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing CP brass towel rail (heavy duty) ISI marked IS 8931 and 8934 complete with brackets fixed to wooden cleats with C.P. brass screws with concealed fittings arranjments of approved quality and colour complete (i) 600x20 mm (six hundred into twenty milimeter) as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 600mm x 120 mm x 5mm (six hundred into one hundred twenty into five milimeter) glass shelf with EDGES ROUD OFF, SUPPORTED ON ANIDISED ALUMINIUM ANGLE FRAME with C.P. Brass bracket and guard rail complete, fixed to 40 mm (forty milimeter) long screws. rawl plugs etc complete. as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws Chromium Plated ISI marked IS No.8934 of Jal /ESS or its Equivalent.complete. as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing chromium plated brass toilet paper holder.complete. as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing CP brass bib cock of approved quality confirming to IS: 8931 15 mm (fifteen milimeter) nominal bore complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and Eixing (ii) C.P Brass pillar tap jaguar with Capstan head Chromium Plated (heavy duty) ISI marked IS No. 8931 and 8934 of Jal /ESS or its Equivalent (i) 15mm dia.complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing C.P. brass angle valve for basin mixer and geyser point of approved quality confirming to IS: 8931 rriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.15mm dia.complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing unplasticised PVC connection pipe with brass unions: 45 cm (forty five centimeter) and 15 mm (fifteen milimeter) nominal bore. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing CP S trap (heavy duty) ISI marked IS: 8931 and 8934 for wash basin or sink. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing CP bottle trap (heavy duty) ISI marked IS: 8931 and 8934 for wash basin or sink. 32 mm (thirty two miolimeter) dia. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make confirming to IS: 8931 complete 15 mm (fifteen milimeter) dia. and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing PTMT brass bib cock of approved quality and colour 15 mm (fifteen milimeter) nominal bore,86 mm (eighty six milimeter) long,weighing not less than 88 gms (eighty eight gramme) complete. and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing PTMT push cock of approved quality and colour 15 mm (fifteen milimeter) nominal bore,80 mm (eighty milimeter) long,weighing not less than 46 gms (forty six grams) complete. and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing brass full way valve with Wheel (a) 15 mm (fifteen milimeter) nominal Size complete. and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing brass full way valve with Wheel (a) 20 mm (twenty milimeter) nominal Size complete. and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing brass ball way valve (horizontal plunger type) high pressure with polythene to eureopean type WC of quality and make as approved by the engineer in Charge 15 mm (fifteen milimeter) nominal bore complete. and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 8 mm (eight milimeter) dia C.P./S.S. jet with flexible tube upto 1.00 m (one meter) long with S.S. triangular plate to european type W.C. of quality and make as approved by the engineer in Charge complete. and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and laying 150 mm (one hundred fifty milimeter) dia (level to slopes) and jointed with approved adhesive high pressure PVC spigot and socket waste and ventilating pipe 150 mm (one hundred fifty milimeter) dia in trenches complete. and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and laying cement concrete1:5:10 (one cement isto five sand isto ten graded stone aggregate 40 mm (forty milimeter) nominal size) allround S.W/PVC pipes 150 mm (one hundred milimeter) dia including bed concrete as per standard design complete. and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand ) with RCC top slab with 1:1.50:3 mix (one cement isto one point five zero coase sand isto three graded stone aggregate 20 mm (twenty milimeter) nominal size), foundation concrete 1:4:8 mix (one cement isto four course sand isto eight graded stone aggregate 40 mm (forty milimeter) nominal size) , in side plastering 12 mm thick (twelve milimeter) with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coart of neat cement and making channels in cement concrete 1:2:4 ( one cement isto two coarse sand isto four graded stone aggregate 20 mm (twenty milimeter) nominal size, finished with a floatingh coat of neat cement complete as per standard design, complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. in side size 90x80 (ninety into eightycentimeter) and 45 cm (forty five centimeter) deep including CI cover with frame (light duty) 455x610 mm (four hundred fifty five into sixhundred ten milimeter) internal dimensions,total weight of cover and frame to be not less than 38 kg (thirty eight kilogramme) (weight of cover 23 kg (twenty three kilogramme) and weight of frame 15 kg (fifteen kilogramme) With common burnt clay F.P.S. (non modular) bricks of class designation 7.50 (Seven point fifty) precast RCC Cemocrate or equivalent (heavy grade) cover with frame forgully trape (standard pattern)

Inside size 120x90 cm (one hundred twenty into ninety centimeter) and 90 cm (ninety centimeter) deep including precast RCC Cemocrate or equivalent cover with frame(heavy duty) of size 455x610 mm (four hundred fifty five into six hundred ten milmeter) internal dimentions complete (i) with common brunt clay F.P.S. (non Modular) bricks of class designation 7.50 cm as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. LD-2.5 rectangular shape 610x455 mm (six hundred ten into four hundred fifty five milimeter) internal dimentions.complete

Supplying and fixing 300 mm X 300 mm (three hundred milimeter into three hundred milimeter) precast RCC cemocrate or equivalent (heavy grade) cover with frame for gully trap (standard pattern) complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Supplying and installing Mono block electric pump 2.00 HP (two hourse power) single phase of kirloskar make or equivalent including fixing complete including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Cutting holes upto 30 cm x 30 cm (thirty centimeter into thirty centimeter) in walls including making good the same with common brunt clay F.P.S. (Non modular) bricks complet including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Cutting holes upto 15 cm x 15 cm (fifteen into fifteen centimeter) in R.C.C floors and roofs for passing drain pipe etc. and repairing the holes after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including finishing complete so as to make it leak proof. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing ,laying, jointing and pointing with a stiff mixture of cement mortar in proportion of 1:1 (one cement isto one sand) 150 mm (one hundred fifty milimeter) internal diameter salt glazed stone waregrade 'A' half round channels complete so as to make it leak proof. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Suppying, filling,spreading and levelling brick bats in soakpit of following sizes complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Suppying, filling,spreading and levelling crushed stone aggregate in soakpit of following sizes, complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.25 mm (twenty five milimeter) nominal size

Suppying, filling,spreading and levelling crushed stone aggregate in soakpit of following sizes, complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.12 mm (twelve milimeter) nominal size

Nikhil private limited

Rajesh Kumar Sharma