Delhi

Financial Eval

Works

Electrical Works

Replacement of Old Fittings, Fans with new energy efficient fittings at various areas at DDU Hospital. Hari Nagar, New Delhi

Public Works Department

Deen Dayal Upadhyaya Hospital | West Delhi, Delhi

Amount: ₹26.9 LCloses: 29 Apr 2026Closed

Timeline

Published21 Apr 2026
Closed29 Apr 2026
Technical Evaluation11 May 2026
Financial Evaluation11 May 2026
Award—

Bids

Percentage

10 Bids11 May 2026

#	Company	Amount	Rank	Status
1	R J P ENTERPRISES L1₹18.0 LAccepted-Finance 11 C GROUND FLOOR DYADER ENCLAVE VIKAS NAGAR ITTAM NAGAR WEST DELHI 110059 \| WEST \| DELHI \| 110059	₹18.0 L	L1	Accepted-Finance Qualified as Rank L1
2	M/S Ritzy Refrigeration & Air Conditioning L2₹19.5 L+₹1.5 L (8.31%)Rejected-Finance	₹19.5 L+₹1.5 L (8.31%)	L2	Rejected-Finance Rank L2
3	GRAPHITE WORKS L3₹21.1 L+₹3.1 L (17.1%)Rejected-Finance	₹21.1 L+₹3.1 L (17.1%)	L3	Rejected-Finance Rank L3
4	ARJUN SINGH L4₹23.2 L+₹5.2 L (28.7%)Rejected-Finance	₹23.2 L+₹5.2 L (28.7%)	L4	Rejected-Finance Rank L4
5	M/s Bhagwat Associates L5₹23.4 L+₹5.3 L (29.6%)Rejected-Finance NONE	₹23.4 L+₹5.3 L (29.6%)	L5	Rejected-Finance Rank L5

Tender Value

₹26.9 L

EMD Value

₹53,745

Closing Date

29 Apr 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

Executive Engineer(E)

Address

Executive Engineer (E), PWD HMED SW (NCTD), Ist floor, Samaj Sadan, DAP Lines, Vikas Puri, New Delhi

Work Description

Replacement of Old Fittings, Fans with new energy efficient fittings at various areas at DDU Hospital. Hari Nagar, New Delhi

Tender Information

Tender ID

2026_PWD_290153_1

Reference Number

03/EE(E)/PWD HMED SW/2026-27

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Works

Period of Work

60 days

Location

Deen Dayal Upadhyaya Hospital

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredScanned copy of EMD Document (.pdf)

RequiredScanned copy of Receipt of deposition of original EMD issued from division office of any Ex. Engg. (.pdf)

RequiredScanned copy of Affidavit as per clause 1.2.2 of CPWD 6 Form. (.pdf)

RequiredScanned copy of valid Electrical Licence or Undertaking (.pdf)

RequiredScanned copy of documents required as mentioned at Sl. No.17(e) at Page-5 of uploaded NIT (.pdf)

RequiredScanned copy of valid GST Registration Certificate (.pdf)

RequiredScanned copy of latest upto date due GST return filed acknowledgment (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹53,745

Important Dates

Last Activity

11 May 2026

Published

21 Apr 2026

Bid Opening

29 Apr 2026

Download Starts

21 Apr 2026

Download Ends

29 Apr 2026

Submission Starts

21 Apr 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (1 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). Powder Coated CRCA Sheet Body (Thickness > 0.50 mm)
1.01	36 Watt	-	Each	-	-
2Suppling, Installation, Testing and Commissioning of 450 mm Sweep Wall Fan with metal blade on the wall with dash fastener, connection with 1.5 sq mm FRLS PVC insulated wire complete i/c dismantling of old unit as required
3Supplying & Fixing of 400 mm Sweep Hi Speed Domestic Wall Mounted Fans on the wall with dash fastener, connection with 1.5 sq mm FRLS PVC insulated wire complete etc. as reqd
4Suppling, Installation, Testing and Commissioning of 600 mmm Sweep Heavy Duty Wall Mounted Air Circulator Fans on the wall with dash fastener, connection with 1.5 sq mm FRLS PVC insulated wire complete etc. as reqd.
5SITC of Storage Water Cooler Cum Purifier with 120 Liter Storage and 60 Liter Cooling having inbuilt Eight Stage Reverse Osmosis purification System ;suitable for operation on 230 VAC ,50 HZ with Power Consumption 850 Watts+_ 10% providing water outlet temperature at 15 degC with UV Lamp Filtration for effectively preventing post microbial contamination in the storage tank. Refrigerant should be HFC R-134 A and Compressor make Emerson. Filtration stages should be as Particulate Filter- 20 inch ; Pre Carbon Filter- 10 inch; Anti-Scalant Cartridge- 10 inch; Sediment Filter- 10 inch; RO Membrane-80 GPD X 04 Nos; Post Carbon Filter- 10 inch; UV Lamp-8 Watts. The storage tank material of SS304 & outer body material of GI Powder Coating. The product should have 3 faucets along The product manufacturer must have their NABL Accredited Lab Testing facilities in Delhi. The Product should be ISO 9001 and Indian Medical Association Certified.

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.06 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Financial Evaluation

fin_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.54 MB

Work Item Documents

BOQ_385190.xls

BOQ • 0.38 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

R J P ENTERPRISES

L1₹18.0 LAccepted-Finance

11 C GROUND FLOOR DYADER ENCLAVE VIKAS NAGAR ITTAM NAGAR WEST DELHI 110059 | WEST | DELHI | 110059

M/S Ritzy Refrigeration & Air Conditioning

L2₹19.5 L+₹1.5 L (8.31%)Rejected-Finance

GRAPHITE WORKS

L3₹21.1 L+₹3.1 L (17.1%)Rejected-Finance

ARJUN SINGH

L4₹23.2 L+₹5.2 L (28.7%)Rejected-Finance

M/s Bhagwat Associates

L5₹23.4 L+₹5.3 L (29.6%)Rejected-Finance

NONE

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). Powder Coated CRCA Sheet Body (Thickness > 0.50 mm)
1.01	36 Watt	-	Each	-	-
2Suppling, Installation, Testing and Commissioning of 450 mm Sweep Wall Fan with metal blade on the wall with dash fastener, connection with 1.5 sq mm FRLS PVC insulated wire complete i/c dismantling of old unit as required
3Supplying & Fixing of 400 mm Sweep Hi Speed Domestic Wall Mounted Fans on the wall with dash fastener, connection with 1.5 sq mm FRLS PVC insulated wire complete etc. as reqd
4Suppling, Installation, Testing and Commissioning of 600 mmm Sweep Heavy Duty Wall Mounted Air Circulator Fans on the wall with dash fastener, connection with 1.5 sq mm FRLS PVC insulated wire complete etc. as reqd.
5SITC of Storage Water Cooler Cum Purifier with 120 Liter Storage and 60 Liter Cooling having inbuilt Eight Stage Reverse Osmosis purification System ;suitable for operation on 230 VAC ,50 HZ with Power Consumption 850 Watts+_ 10% providing water outlet temperature at 15 degC with UV Lamp Filtration for effectively preventing post microbial contamination in the storage tank. Refrigerant should be HFC R-134 A and Compressor make Emerson. Filtration stages should be as Particulate Filter- 20 inch ; Pre Carbon Filter- 10 inch; Anti-Scalant Cartridge- 10 inch; Sediment Filter- 10 inch; RO Membrane-80 GPD X 04 Nos; Post Carbon Filter- 10 inch; UV Lamp-8 Watts. The storage tank material of SS304 & outer body material of GI Powder Coating. The product should have 3 faucets along The product manufacturer must have their NABL Accredited Lab Testing facilities in Delhi. The Product should be ISO 9001 and Indian Medical Association Certified.

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). Powder Coated CRCA Sheet Body (Thickness > 0.50 mm)

1.01

36 Watt

Each

2Suppling, Installation, Testing and Commissioning of 450 mm Sweep Wall Fan with metal blade on the wall with dash fastener, connection with 1.5 sq mm FRLS PVC insulated wire complete i/c dismantling of old unit as required

3Supplying & Fixing of 400 mm Sweep Hi Speed Domestic Wall Mounted Fans on the wall with dash fastener, connection with 1.5 sq mm FRLS PVC insulated wire complete etc. as reqd

4Suppling, Installation, Testing and Commissioning of 600 mmm Sweep Heavy Duty Wall Mounted Air Circulator Fans on the wall with dash fastener, connection with 1.5 sq mm FRLS PVC insulated wire complete etc. as reqd.

5SITC of Storage Water Cooler Cum Purifier with 120 Liter Storage and 60 Liter Cooling having inbuilt Eight Stage Reverse Osmosis purification System ;suitable for operation on 230 VAC ,50 HZ with Power Consumption 850 Watts+_ 10% providing water outlet temperature at 15 degC with UV Lamp Filtration for effectively preventing post microbial contamination in the storage tank. Refrigerant should be HFC R-134 A and Compressor make Emerson. Filtration stages should be as Particulate Filter- 20 inch ; Pre Carbon Filter- 10 inch; Anti-Scalant Cartridge- 10 inch; Sediment Filter- 10 inch; RO Membrane-80 GPD X 04 Nos; Post Carbon Filter- 10 inch; UV Lamp-8 Watts. The storage tank material of SS304 & outer body material of GI Powder Coating. The product should have 3 faucets along The product manufacturer must have their NABL Accredited Lab Testing facilities in Delhi. The Product should be ISO 9001 and Indian Medical Association Certified.