Tender ID

DEFPROC

Active

Works

Civil Works

SPL REPAIR TO BLDG NO 02 (NEAR STN HQ) AT AEC TRG COLLEGE AND CENTRE PACHMARHI

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

AGE Indpt Pachmarhi Dist- Hoshangabad (MP)-461881 | Hoshangabad, Madhya Pradesh

Amount: ₹9.7 LCloses: 21 Nov 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published3 Nov 2026
Submission Opens15 Nov 2026
Closes21 Nov 2026
Bid Opening27 Nov 2026

Tender Value

₹9.7 L

EMD Value

₹19,350

Closing Date

21 Nov 2026, 6:00 pm

Tender Inviting Organisation

Name

AGE(I) PACHMARHI

Address

AGE (Indpt) Pachmarhi Dist- Hoshangabad (MP)-461881

Work Description

SPL REPAIR TO BLDG NO 02 (NEAR STN HQ) AT AEC TRG COLLEGE AND CENTRE PACHMARHI

Tender Information

Tender ID

2026_MES_797048_1

Reference Number

AGE(I)/PACH/ of 2026-27(8835/E8)

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Works

Period of Work

180 days

Location

AGE Indpt Pachmarhi Dist- Hoshangabad (MP)-461881

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per tender documents

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredScanned copy of application for bid opening. (.pdf)

RequiredScanned copy of DD/ Banker cheque as tender fee. (.pdf)

RequiredScanned copy of letter of GST Registration. (.pdf)

RequiredScanned copy of letter of EPF Code Registration and ESIC Certificate. (.pdf)

RequiredScanned copy of enlistment letter issued by MES authority. (.pdf)

RequiredScanned copy of documents for un-enlisted contractor as mentioned in NIT. (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

AGE(I) PACHMARHI

EMD Fee Amount

₹19,350

Important Dates

Last Activity

3 Nov 2026

Published

3 Nov 2026

Bid Opening

27 Nov 2026

Download Starts

3 Nov 2026

Download Ends

21 Nov 2026

Submission Starts

15 Nov 2026

Bill of Quantities

Item RateBoQ_Ver3.1INR

BoQ1 (113 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Demolition of brick work built in cement mortar or cement lime mortar complete all as sepecified and directed by Engineer-in-charge.	2	Cum	-	-
2	Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises, complete all as sepecified and directed by Engineer-in-charge.	30	Sqm	-	-
3	Demolition of PCC in ground floor & pavings (including floor tile) n.exc 15 cm thickness below or above GL, including removing excavated material exc 1.5 KM but n exc 5.0 KM distance and depositing where as directed, complete all as sepecified and directed by Engineer-in-charge.	8.13	Cum	-	-
4	M&L for non skid, coloured ceramic tiles 7-8 mm thick of approved colour (square/rectangular) area of each tiles exc 0.11 but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of coloured tiles over & includind 15 mm thick screed bed or bedding layer in CM (1:6) complete all as sepecified and directed by Engineer-in-charge.	10	Sqm	-	-
5	M&L for glazed ceramic colored tiles 450x300 x 6-7mm thick coloured on vertical surfaces such as skirting/dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including rendering 10 mm thick in cement motar 1:4 on wall complete all as sepecified and directed by Engineer-in-charge.	20	Sqm	-	-
6	M&L for double charged vitrified ceramic coloured tiles 10 mm thick, area of each tiles n. exc 0.36 sqm in floors, set and pointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick scarred bed in cement mortar 1:6 complete all as sepecified and directed by Engineer-in-charge.	35	Sqm	-	-
7	M&L for double charged vitrified ceramic coloured tiles 10 mm thick, area of each tiles n. exc 0.36 sqm on vertical surfaces over and incld 10 mm thick rendering in CM 1:3 complete all as sepecified and directed by Engineer-in-charge.	5	Sqm	-	-
8	M&L 25mm thick PCC 1:2:4 type B-I using 20 mm graded stone aggregates as in flooring finished even and fair complete all as sepecified and directed by Engineer-in-charge.	110	Sqm	-	-
9	M&L Cement Concrete 1:3:6 (40mm graded aggregate), 75mm thick as laid in alternate bays, finishing Concrete Surfaces Even and Smooth without using Extra Cement, complete all as sepecified and directed by Engineer-in-charge.	25	Sqm	-	-
10	M&L PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in coping/ benching surface channel including weathering, slightly rounded or chamfered angles and throating ccomplete all as sepecified and directed by Engineer-in-charge.	1	Cum	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.45 MB

Work Item Documents

BOQ_894037.xls

BOQ • 4.39 MB

TENDER8835.pdf

Tender Documents • 1.43 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Demolition of brick work built in cement mortar or cement lime mortar complete all as sepecified and directed by Engineer-in-charge.

Cum

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises, complete all as sepecified and directed by Engineer-in-charge.

Sqm

Demolition of PCC in ground floor & pavings (including floor tile) n.exc 15 cm thickness below or above GL, including removing excavated material exc 1.5 KM but n exc 5.0 KM distance and depositing where as directed, complete all as sepecified and directed by Engineer-in-charge.

8.13

Cum

M&L for non skid, coloured ceramic tiles 7-8 mm thick of approved colour (square/rectangular) area of each tiles exc 0.11 but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of coloured tiles over & includind 15 mm thick screed bed or bedding layer in CM (1:6) complete all as sepecified and directed by Engineer-in-charge.

Sqm

M&L for glazed ceramic colored tiles 450x300 x 6-7mm thick coloured on vertical surfaces such as skirting/dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including rendering 10 mm thick in cement motar 1:4 on wall complete all as sepecified and directed by Engineer-in-charge.

Sqm

M&L for double charged vitrified ceramic coloured tiles 10 mm thick, area of each tiles n. exc 0.36 sqm in floors, set and pointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick scarred bed in cement mortar 1:6 complete all as sepecified and directed by Engineer-in-charge.

Sqm

M&L for double charged vitrified ceramic coloured tiles 10 mm thick, area of each tiles n. exc 0.36 sqm on vertical surfaces over and incld 10 mm thick rendering in CM 1:3 complete all as sepecified and directed by Engineer-in-charge.

Sqm

M&L 25mm thick PCC 1:2:4 type B-I using 20 mm graded stone aggregates as in flooring finished even and fair complete all as sepecified and directed by Engineer-in-charge.

110

Sqm

M&L Cement Concrete 1:3:6 (40mm graded aggregate), 75mm thick as laid in alternate bays, finishing Concrete Surfaces Even and Smooth without using Extra Cement, complete all as sepecified and directed by Engineer-in-charge.

Sqm

M&L PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in coping/ benching surface channel including weathering, slightly rounded or chamfered angles and throating ccomplete all as sepecified and directed by Engineer-in-charge.

Cum