REPAIR TO SEWAGE LINE, FENCING, GATES, ROLLING SHUTTERS, PLINTH PROTECTION, MANHOLES, SEPTIC TANKS, REPAIR TO DRAINS AND MISC BR WORKS AT AF STN RAJOKRI UNDER AGE BR AF RAJOKRI OF GE AF GURGAON

Amount

Demolition of cement concrete (un-reinforced) of any description & in any position not specifically provided for and removing the same upto 50m complete all as specified and directed

M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggreate), 75 mm thick as in plinth protection including finishing the surface even & smooth without using extra cement complete all as specified & directed.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, precast concrete articles, PCC Jallies pillars etc but excluding ashlar facings, dressed stone works and , complete all as specified and directed

Dismantling posts or struts (wood, steel, or RCC) any section, incl taking out embedded portion and making good disturbed ground posts embedded in concrete brick work masonry etc

Taking down barbed wire fencing of any description and in any position fixed to RCC/steel posts complete all as specified and as directed by Engr-in-Charge (each row shall be measured separately)

S&FGalvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc comlete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed

S&F rolled mild steel in framed work as in doors or steel gates of angle or other section with gusset plates, etc., drilled for fixing of steel sheeting or other covering to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe- 290.Gde-E-165 complete all as specified and directed.

S&F framed work such as grills gratings, etc with ends of bar shouldered and/or revited or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings framework of water tanka and similar works confirming to Fe 290 Gde E-165 complete all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay) heavy for large gates, hook and pintle hinges large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

S&F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work etc complete all as specified and as directed

M&L for excavating in post holes (or similar holes) each n.exc 0.5Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25CM, in soft and loose soil complete all as specified and directed.

M&L cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M & L brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6.0 M mean radius built in cement mortar 1:4 complete all as specified and as directed.

M & L Providing precast cement concrete louvres and jallies, 25 mm thick type B-0 1:2:4 ( using 12.50 mm graded aggregate (measured solid), including all ould- ings but excluding frame complete all as specified and as directed

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in surface channel and drains etc complete all as specified and as directed

M&L Rendering 15 mm thick in CM 1:4 on brick work or concrete surfaces finished even and fair complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface as in cement mortar 1:4 with WPC , finished even and fair complete all as specified and as directed. Note:- WPC shall be measured and paid separately

Supply only intergral water proofing compound ISI Marked complete all as specified and directed

M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate as in coping benching, gola and similar items complete all as specified and as directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys ,scrubbing down with water etc complete and removal of demolished material to a distance not exceeding 50 Mtr complete all as specified and directed

M&L 15mm thick plastering in CM 1:4 on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair without using extra cement complete all as specifiedand directed. Note : The work is to be carried out upto 3rd storey buildings

M&L preparation of newly plastered surfaces of wall and applying two coats of cement base paint on walls. complete all as specified and directed. Note : The work is to be carried out upto 3rd storey buildings

M&L Rendering 15 mm thick in CM 1:6 on brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as spd and directed

M&L for preparation of newly plastered or unplastered/undecorated surface of wall and applying two coats of Oil Bound distemper over one coat of primer complete all as specified and directed

M&L rendering 10mm thick in CM 1:3 as in ceilings finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered/undecorated surface of Ceiling and applying two coats of Oil Bound distemper over one coat of primer complete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

Description same as per item No 28 above but exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and as directed.

S&F window or ventilators section of frame 72x55mm fixed to wall or concrete surface with rowl plugs made of galvanised steel powder coated and section of shutter 47x20mm mulion section 72x50mm (Based steel as per IS 513 "D" quality galanised as per IS 277 with zinc of 120 gms/sqm) glazed or gauged and wire gauge shutter prepare to receive wire mesh to the shutter (Double door shutter) with total coated thickness of 0.6mm including grills/guard bars made of square bars powder coated fixed to window frame with screws including necessary fittings and all builders hardware such as handles, tower bolts and stays etc complete all as specified and as directed. Make : NCL type-4000 Series (Note : Glass and wiremesh shall be measured and paid separately under respective items)

S&F galvanised stainless steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified and as directed

S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads complete all as specified and directed by Engr-in-Charge.

S&F in repair re-inforced punched concertina coil of 900mm dia (chrome razer or blade wire) with barbed tape of 0.50 mm thick galvanised steel steel sheet or core wire of dia 2.5mm of high tensile steel wire including galvanised mild steel staple/clips for tying at crossing etc complete all as specified and as directed.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

Desludging of manholes manually by removing all scales, loose materials and sludge and cleaning the same with water sludge taken out from manholes will be thrown away from camp area depth of manholes not exc 1.00 mtr complete all as spd and directed by Engr-In-Charge.

All as per Item No-35 herein before,but depth of manholes exc 1.00mtr and n.exc 2.00 mtr

Desludging of septic tanks 200 users by blocking the incoming line to the tank , removing all wet sludge with bucket etc and finally sweeping the surface of tank with clean water complete sludge whatever may be the depth will be removed by manually or mechanically as spd and directed by Engr-In-Charge.

All as per item No- 37 above but 100 users septic tanks

All as per item No- 37 above but 50 users septic tanks

All as per item No-37 above but 25 users septic tanks

Cleaning and desludging of existing sewage line of 100mm to 150mm bore and depth up to 2.00mtr from manhole to manhole complete desludging by means of mechanical or manual rodding by blocking the first manhole and taking all sludge to the next manhole and taking out sludge finally cleaning the line by clean water complete all as spd and directed by Engr-In-Charge.

Dewatering of soak well 2.4mtr dia and 6mtr depth complete all as spd and directed by Engr-In-Charge.

Demolition and breaking up drain pipes of dia 200mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as spd and directed

M&L for reinforced concrete pipes 200 mm dia, class NP-2, laid and jointed complete with collars complete all as spd and directed

M&L cement concrete 1:3:6 type C-2 for 200 mm dia in bed to drain pipes including packing under, and completely surrounding pipes with concrete after they are laid and tested complete all as spd and directed

Dismantling of cast iron or reinforced concrete drain pipe up to 100 mm dia, jointed in cement mortar and taking out trenches if required etc complete all as specified and directed

S&F 100mm bore cast iron soil, waste and vent pipes, in any length with or without ears fixed to wall complete all as spd and directed

S&F in repair 100 mm bore CI bend (any radius) complete all as specified and directed.

S&F in repair 100 mm bore CI bend (any radius) with oval access door complete all as specified and directed.

S&F in repair CI branch pieces 100 mm dia double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F in repair 100mm bore cast iron cowl fixed complete all as specified and directed

S&F in repair 75mm bore cast iron soil, waste and vent pipes, in any length with or without ears fixed to wall complete all as spd and directed

S&F in repair 75 mm bore cast iron cowl fixed complete all as spd and directed

S&F in repair 75mm PVC(SWR) floor trap plain with grating incl jointing with solvent cement complete all as spd and directed

S&F in repair salt glazed stone ware gully trap of size (150x150mm) square or round mouthed traps "P" including demolition of old gully trap complete all as spd and as directed.

M&L for 150 mm dia salt galzed stone ware (SGSW) drain pipe, grade 'A' laid in trenches and jointed complete all as specified and as directed

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore all as directed

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110 mm bore all as directed

S&F in repair PVC (SWR) bends any radius 110mm bore all as directed

S&F in repair PVC (SWR) bends any radius 75mm bore all as directed

S&F in repair PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door all as directed

S&F in repair 110mm dia PVC (SWR) pipe and single socketed in any length with rubberring joint fixed to wall.

M&L cement concrete 1:3:6 type C-2 for 150 mm dia in bed to drain pipes including packing under, and haunching against the sides of pipes etc complete all as specified and as directed

M&L for concrete bed to drain pipes 150 mm bore including packing under and competely sorrounding pipes with concrete after they are laid and tested in cement concrete 1:3:6 type C-2 all as specified and directed.

M&L cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching so required 150m dia complete all as spd and directed

Excavating in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation etc for shafts, wells cesspits, manholes, piers holes etc not exceedin 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in loose/soft soil etc complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and directed

Removing excavated soil to a distance exc 250m but n.exc 500m and depositing where directed complete all as specified and directed

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete, sub base complete all as specified and directed.

S & F SFRC manhole cover 75mm thick (size 1.00 x 0.50) factory made with plain surface as per requirement including 75x1.5mm flat iron frame all around the cover complete all as specified and as directed.

M&L for repairs and servicing of rolling shutters and removing of worn out components wherever required such as hood covers, laths, ball bearings, helical wire springs, lock plates, bracket plate, shaft pipe and straightening of existing guide channels, gear boxes, laths, hood cover at required places including greasing and welding and refixing in the same opening for smooth functioning and making good the disturbed surfaces of walls to match with existing complete all as specified ans as direcrted. NOTE: (i) Quoted rate shall be inclusive for replacement all minor spare parts as required and supply of major spare part such as MS Spring, ball bearings, laths, shaft pipe, gear set required for replacement shall be measured and paid separetaly under relevant items.

S&F Safety Lever Locks mild steel with 4 levers for rolling shutters complete all as specified and directed

S&F Ball bearing for rolling shutters complete all as specified and directed

S&F in repair steel rolling shutter of thickness 1.25mm without ball bearing as specified incl top cover , anchoring rod , hasp and staple , and one shop coat of primer erected in position all as specified and directed by Engr-in-charge.

S & F in repair all as item No 74 but gear operated type with bevelled gear box and crank handle.

S & F 10mm dia of shank mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other end,each screwed end to be fitted with washers and one hexagonal or square nut but length exc 5CM and n exc 10 CM long all as specified and as directed.

Fixing only chain link fencing including line wire, 10 cms mesh of 10 guage standard, rails, straining bolts etc including provision of binding wire.

Supplying only chain link MS galvanized fencing 10 Cms mesh and 10 guage . Complete all as specified

S&F Mild Steel round bar 10 dia and over cut to length bent to shape required, including cranking, bending spirally for hooping ends for Fe 410W Gde E -250 or Fe 290 Gde E-165 complete all as specified

S & F in repair drapery rod 25 mm dia high strength aluminium rod with powder coated paint of thickness 40/60 microne of wood finish and one set of ornamental decoative finish MS clamps and Wooden Knobs complete all as specified and directed

M&L for 75 mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) as in sub base of flooing etc complete all as specified and as directed

M&L for screed bed or bedding layer of mortar 20 mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

M&L for machine presssd pre-cast coloured concrete interlocking paver block any shape confirming to IS-15658-2006 of 60mm thick , M-35 Grade with grey cement and pigment as approved complete all as specified and as directed

M & L sand filling under interlocking tiles for cushioning etc as complete all as specified and as directed

M&L chequered cement concrete coloured tiles 30 cmx30 cmx25mm, set jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed.

KISHAN SINGH AND CO

M/S GEETANJALI ENTERPRISES

M/s.sagar enterprises