PROVN OF SHED OVER THREE SQUAD POST ADJACENT TO MMW TRG AREA AT AEC TRG COLLEGE AND CENTRE PACHMARHI. 2

Amount

Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out any type of soil complete all as specified and directed.

Hardcore of brocken stone or boulder gauge n exc 63mm, deposited, sprade and levelled in layers n exc 15cm thick watered and rammed to true surface complete all as specified and directed.

M&L100 mm thick PCC 1:4:8(40 mm graded stone aggregate) type D-2 as in sub base complete all as specified and directed.

M & L for 3 mm thick 28 mm wide glass dividing strips, inserted in position,conform to design complete all as specified and directed.

M&L for 50 mm thick cement concrete type B-1,1:2:4 ( using20mm graded stone aggregate) as n floors complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-0 (using 12.5mm and below stone aggregate ) in coping, kerb stone etc complete with joint to match in CM 1:6 complete all as specified and directed.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in deep and getting out any type soil complete all as specified and directed.

M/L cement concrete Type D 2 1;4;8 (40mm graded aggregate)in foundation ,filling , mass concrete complete all as specified and directed.

M&L for modular brick work sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for rendering 15 mm thick on fair face of bricks or concrete surface in CM 1:6 complete all as specified and directed.

Preparation of new surface of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in loose/soft soil complete all as specified and directed.

Removing excavated soil n.exc 50 m and depositing where directed at a level n.exc1.5m above the starting points complete all as specified and directed.

Excavating in post holes each nexc 0.5cum getting out in any type soil,ramming earth filling or broken rubble mixed with earth around in layers nexc 25cm watering and removing surfaces soil to a distance nexc 50m and making good surfaces complete all as specified and directed.

M/L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation for posts hole complete all as specified and directed.

S&F for Steel work in tubular trusses(framed works as in purlin, rafters, column square/rectangular, round or angle section) including special shaped washer, MS plates incl necessary holes etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed.

S&F Mild steel screw bolts 5-10 mm dia (machine made) with hexagonal or squareheads at one end and screwed the other, orscrewed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

M&L Pre- painted. Galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws complete all as specified and directed.

M&L painting to new steel surface of any description over 10cm width or grith not otherwise described including preparation , priming with zinc chromate and two coats of synthetic enamel paint complete all as specified and directed.

M&L 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed

DEEPAK JAISWAL

GHASI RAM SAHU

RAMESH CHANDRA AGRAWAL

SUBIR KUMAR ROY

MODI CORPORATION

SATHI ENTERPRISES