External repair and painting of various building and boundary wall inside Factory at HAL Lucknow

Name of the Individual / Firm / Company: * Mandatory

Type of ownership Pvt. Ltd./ Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

Contact details

Intending parties having credentials as mentioned below may participate in e-tendering. The pre-qualification requirements for the works are as under :-

List of similar works executed in the past 7 years with value, schedule period of completion reasons for delay in completion if any and salient features of works, with documentary evidence of satisfactory completion.

PAN No.:

Constitution and legal status i.e. Proof of proprietary/Partnership firm or company & authorised person for receiving or signing the documents to be submitted.

Goods and Service Tax ID No.

SAC for the said work shall be 995419

Bank account details such as account no., name of account holder, name and address of the bank, IFSC code duly certified by the bank along with cancelled cheque as a document of proof shall be attached.

Registered Contractor

Average annual financial turn over during the last 3 years, ending 31st March 2022 of the previous financial year [ should not be less than 30% of Amount put to tender]

EMD of Rs.190960.00

Latest Solvency Certificate issued from Nationalized/ scheduled Bank issued and NOT before 12 months from the last date of Tender submission

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded]

(i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost.

(ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost.

(iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Details of person holding the power of Attorney (If different from contact person)

DECLARATION I

DECLARATION II

DECLARATION III

Description of Items

Repairs to plaster of thickness 12 mm to 20 mm with cement mortar 1:4 (1cement: 4 coarse sand) in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls/ concerete surface, complete, including jambs, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement, including disposal of rubbish to the dumping ground at directed place, including all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per CPWD specification and direction of EIC.

Removing dry or oil bound distemper, water proofing cement paint, synthetic enamel or of any painted surface and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches, scaffolding, work to any height, safety measures etc. all complete as per specification & as required and directed by Engineer in charge.

Providing and applying 01mm thick wall care putty (Birla/ JK/ Asian/ Berger or as approved ) on wall and ceiling for making surface smooth & even including preparation of surface by sand paper, wire brushing, washing down, filling holes, removal of nails etc including scaffolding, wastages, cleaning the surface clean etc. including cost of all labours, materials, scaffolding and curing and T&P etc. all complete at all height as per specification, drawing and as directed by Engineer in charge.

Providing & applying two coats of finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives; New/old work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.of first quality of approved shade and make like apex ultima of Asian /weather coat long life of Berger / weather shield max of ICI etc including preparation of surfaces, by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing rubbish outside in dustbins removal of all splashes and cleaning glass and joinery, use of scaffolding all complete as per specification & direction ofEIC. For New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.etc all complete as per direction of EIC.

Providing and applying two or more coats of synthetic enamel paint on wall / wood/ steel surface of any description any girth at any height with first quality synthetic enamel paint of Asian / Shalimar / Berger/ ICI of approved tint and shade by EIC over a coat of suitable primer for respective surface primer of above brand including preparing of surface by sand papering, removing oil/ smudge marks, filling including cleaning the dirt and other impurities, scrapping smooth and filling crevices with approved filler of approved brand, including cost of all material, labours,ladders/ scaffoldings, brushes, T&P etc. complete at all height as per specification, drawing and as directed by Engineer in charge.

Providing, applying and finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications of shade & make like Asian/ Berger/ Shalimar or as approved by EIC including appropriate priming coat, preparation of surface, by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing Rubbish outside in dustbins removal of all splashes and cleaning glass and joinery, use of scaffolding all complete as per specification & all labour, T&P etc. complete as required and directed by EIC.

On Steel surface

On concrete surface

Providing and fixing 05 mm thick glazing with float glass sheet in window/ ventilator shutters etc. with EPDM rubber / neoprene gasket etc. of make Saint Gobain/ Modiguard or as approved by EIC, complete as per the drawings and the directions of engineer-in-charge . : With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) including removal of existing /broken glass cutting to shape, fixing, making holes for fittings if required, with all complete including cost of all materials , labours, T & P, cutting wastages, making provisions for harware fittings, etc all complete at all height as per drawing, specification and as per direction of E.I.C. The pattern, desing, colour etc shall be approved by EIC.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in substructure /superstructure above plinth level up to floor V level, in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) or any description of similar works, including necessary cutting of bricks as required , wastages, straight or curved, work up to any height or depth, including , materials, labour, T&P etc, required for proper completion of the work etc all complete all as per specifications, drawings and as directed by Engineer-in-Charge (EIC).

Providing and fixing unplasticised Rigid 110 mm dia PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.,including cost of all labours, materials, scaffolding, at all height, T&P etc. all complete as per specification, drawing and as directed by Engineer in charge.

Above