Upgradation and renovation of Tau Devi Lal Town Park PLA Ward No. 15, Hisar, Haryana

Amount

OK Play ZigZag Climber

OK PLAY MERRY GO ROUND-NEW

OK PLAY 2 SEATER SEA-SAW

OK PLAY SWING -ECONOMY

OK PLAY FUNSTATION ECONOMY MODEL-2

OK PLAY DOUBLE SIT-UP BOARD (SKU: 0696aa55fa8d)

OK PLAY ARM WHEEL (SKU: ed81751671dc)

OK PLAY LEG STRETCH (SKU: adb46189928c)

OK PLAY PUSH and PULL CHAIR (SKU: 0b5a2727bb3f)

OK PLAY SKY STEPPER (SKU: b7004f6d08cb)

Providing and laying 36mm thick EPDM rubber flooring, comprising of 30mm thick Rubber buffing and EPDM Granules of 6mm on cleaned Cement concrete base including binder, thinner and all required equipment, transportation of material etc. Complete in all respect and as per engineer in charge. Note: Cost of Cement concrete base

Supply and Installation of Stainless steel sheet (2.5-3mm th. sheet-Grade-304 with hair brush finish) MCH Signage with frame of length 5.00m, width/ thickness of letters 0.30-0.45m including frame, and height 1.50m (please refer drawings) at site, including all necessary fixtures, equipment, transportation, loading- unloading, complete as per Engineer-in-charge. Note: Civil and Electrical work not in the scope.

Supply and Installation of Stainless steel sheet (2.5-3mm th. sheet-Grade-304 with hair brush finish) Park Signage (Ch. Tau Devi Lal Panchatatva Town Park) as per attached details and sizes (Length: 9.0m, Width/thickness of letters: 0.30-0.45m and height: 1.05m) with frame at site, including all necessary fixtures, equipment, transportation, loading- unloading etc. complete as per Engineer-in-charge. Note: Civil and Electrical work not in the scope.

Supply and Installation of FRP Sculpture of “I Love Hisar” as per attached details and sizes (Length: 7.50m, Width/thickness of letters: 0.30-0.45m and height: 1.50m) with frame and inbuilt lighting / Illumination work at site, including all necessary fixtures, equipment, transportation, loading- unloading, etc. complete as per Engineer-in-charge. Note: Civil and External Electrical work not in the scope.

Supply and Installation of FRP Panchatatva Sculpture in five colours as per attached detail, Colour and sizes (Length: 1.12m, Width: 1.12m height: 2.40m) with frame at site, including all necessary fixtures, equipment, transportation, loading- unloading, GST etc. complete as per Engineer-in-charge. Note: Civil and Electrical work not in the scope.

Supply and Installation of FRP Surya Namaskar (12 pose) Sculpture with metal colour finish in roundabout near Open air theatre (6.00 m dia of roundabout) as per attached reference image, Size of sculpture is approximately- 2.40m dia, and 3.00m in height with frame at site, including all necessary fixtures, equipment, transportation, loading- unloading etc. complete as per approved scale model by Architect/Engineer-in-charge. Note: Civil and Electrical work not in the scope.

Supply and Installation of Stainless steel (3.50-4.0 mm th. sheet-Grade-304 with hair brush finish) Invisible Yogi Sculpture as per attached reference image, Size of sculpture is approximately- 2.70m Length, 1.0m width and 3.60m in height with frame at site, including all necessary fixtures, equipment, transportation, loading- unloading etc. complete as per Engineer-in-charge. Note: Civil and Electrical work not in the scope.

FEEDER PILLAR EXT LIGHTING OUT DOOR TYPE

MDB EXTERNAL LIGHT

L.T. CABLES SUPPLY (POLYCAB/KEI/RR KABEL Supply of XLPE insulated inner and outer sheathed / armoured aluminium / copper cables as per IS 1554 Part-1 1976 with latest amendments, 1.1 KV grade and of the following sizes, supplied, laid and tied on readymade cable trench / trays or drawn in already installed pipes or clamped to walls, columns, beams or roof. Rate to include provision of approved aluminium cable labels at both ends . Each run of cable to be tested with 1KV meggar and results submitted to client. 3.5 core 70 sq.mm XLPE AL. ARM CABLE 3.5 core 120 sq.mm XLPE AL. ARM CABLE

L.T. CABLES SUPPLY (POLYCAB/KEI/RR KABEL Supply of XLPE insulated inner and outer sheathed / armoured aluminium / copper cables as per IS 1554 Part-1 1976 with latest amendments, 1.1 KV grade and of the following sizes, supplied, laid and tied on readymade cable trench / trays or drawn in already installed pipes or clamped to walls, columns, beams or roof. Rate to include provision of approved aluminium cable labels at both ends . Each run of cable to be tested with 1KV meggar and results submitted to client. 3.5 core 35 sq.mm XLPE AL. ARM CABLE 3.5 core 35 sq.mm XLPE AL. ARM CABLE

Supply of XLPE insulated inner and outer sheathed / armoured aluminium / copper cables as per IS 1554 Part-1 1976 with latest amendments, 1.1 KV grade and of the following sizes, supplied, laid and tied on readymade cable trench / trays or drawn in already installed pipes or clamped to walls, columns, beams or roof. Rate to include provision of approved aluminium cable labels at both ends . Each run of cable to be tested with 1KV meggar and results submitted to client. 4 core 10 sq.mm XLPE AL. ARM CABLE 4 core 16 sq.mm XLPE AL. ARM CABLE

Supply of XLPE insulated inner and outer sheathed / armoured aluminium / copper cables as per IS 1554 Part-1 1976 with latest amendments, 1.1 KV grade and of the following sizes, supplied, laid and tied on readymade cable trench / trays or drawn in already installed pipes or clamped to walls, columns, beams or roof. Rate to include provision of approved aluminium cable labels at both ends . Each run of cable to be tested with 1KV meggar and results submitted to client. 4 core 6 sq.mm XLPE AL. ARM CABLE 4 core 16 sq.mm XLPE AL. ARM CABLE

Supply of XLPE insulated inner and outer sheathed / armoured aluminium / copper cables as per IS 1554 Part-1 1976 with latest amendments, 1.1 KV grade and of the following sizes, supplied, laid and tied on readymade cable trench / trays or drawn in already installed pipes or clamped to walls, columns, beams or roof. Rate to include provision of approved aluminium cable labels at both ends . Each run of cable to be tested with 1KV meggar and results submitted to client. 3 core 2.5 sq.mm XLPE CU. ARM CABLE 4 core 16 sq.mm XLPE AL. ARM CABLE

EXTERNAL LIGHTING FIXTURES Wipro/Philips/Bajaj 45W LED Street Light

SITC OF LED Bollard Fitting with IP65 and IK07 Housing made up of aluminum pipe powder coated black after phosphochromate treatment with aluminum heat sink for effective thermal management with Operating temperature: -10°C to plus 45°C. Total Lenght of 600mm , Total system wattage of 8W having Power factor ) 0.95, , CCT 5700K (ANSI Tolerance),THD(%) ( 20, LED chip of Nichia, Osram, Cree make. LED Efficacy ) 130 Lm/W with Average life L70B50 @ 50000 hours, Interal Driver SPD of 3kV. Complete with Mounting Brackets and accessories as required with connections similar. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, Is 10322/IEC 60598 and for LEDs - LM80, RoHS and Photo Biological Safety certificate. Similar to Havells Mount Bollard 0.60 mtr 5700K CONEBLS8WLED857PSYMTOPC or Equivalent in Philips, Wipro

Supply Installation Testing and commissioning of 70-90W LED Flood Light Similar to Havells Cat Ref :JETAALBAFLOODLIGHT70W or Equivalent in Wipro/ Philips/ Regent

Supply, Installaion Testing and commissioning of 15W Uplighter Similar to Havells Cat Ref LYCUSSPS15WLED730PSYMBOTG or Equivalent in Philips, Wipr

Supply, Installation, Testing and Commissioning of LED Step Light, fixture should be: IP 66and IK 07 made up Pressure die-cast aluminium housing for sturdiness, excellent corrosion resistant and efficient thermal management grey finish and Clear poly carbonate cover Length (L) 196mm, Width (W) 129mm, Height (H) 85mm, with Operating temperature: -10°C to plus 45°C. wide and symmetrical light distribution with system wattage of 3-7W, with system Efficacy of 25 lm/w or more, system lumens ) 80 lms ,Powered by an integral isolated led driver with insulated sleeve and Power factor ) 0.90, CRI ) 70, CCT 3000K (ANSI Tolerance),THD(%) ( 15, LED chip of Nichia, Osram, Cree make, LED Lamp Efficacy ) 100 Lm/W with Average life L70B50 @ 35000 hourss, Interal Driver SPD of 2.5kV. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, Is 10322/IEC 60598 and for LEDs - LM80, RoHS and Photo Biological Safety certificate. Similar to Havells make RADIANTNEOFT07WLED830SASYMBOPC or equivalent in Philips, Wipro

SITC of Havells make Magnum Grand Neo ,36-40W LED batten luminaires with housing made up of scratch resistant unbreakable polycarbonate in grey finish. cable gland is used for maintaining ingress protection. Luminaire should be suitable for Wall/Ceiling mounting with SS clamps. Luminaire shall deliver excellent illumination and visual comfort with CRI of )80, High transmittance Opal Polycarbonate diffuser for glare-free symmetric light distribution. Luminaires should be with 110 lm/W System Efficacy and designed for Avg. LED Life (L70 B50) 50,000 Burning Hours and with high efficient Photobiologically safe LEDs. Luminaire should be Powered by an integral electronic constant current Potted driver offering THDi(10% , IP66 protection and impact resistance of IK07.Operating temperature: -10°C to plus 40°C , Output Short-circuit protection, Surge Voltage protection, and other reliability tests as per IS:15885 Part 2/Sec 13. Luminaires should be provided with 4kV surge protection. Luminaires manufacturer to have an in-house NABL-accredited Laboratory for testing Photometric parameters.Equivalent Havells/Philips/Wipro

Supply ,Installation, Testing and Commissioning of 200W LED Flood Light Similar to Havells Cat Ref :JETAVALOURFL200WLED757PINTWBLTG or Equivalent in Wipro/ Philips

`Supply , Installation and testing of 10m Pole suitable to Hold 4 Flood Light Fixtures per pole including foundation and associated item with all respect to run system with finishing of surface etc. ( Foundation work shall be in Civil Scope as per OEM recommendation /Design)`

`Supply , Installation and testing of 6m Pole for mounting of Street Light Fixture pole including foundation and associated item with all respect to run system with finishing of surface etc. ( Foundation work shall be in Civil Scope as per OEM recommendation /Design)`

`Supply , Installation and testing of 20m High mast suitable to Hold 8 Light Fixtures per pole including associated item with all respect to run system with finishing of surface etc. (Foundation work shall be in Civil Scope as per OEM recommendation /Design)`

`WATER FEATURE WATERBODY No.1: Foam fountain on either side of MCH Signage: (Refer Drg P12256 R1) for details, Please refer attached Techno-Commercial Offer`

`WATER FEATURE WATERBODY No 2: Park Signage with water Cascade and fountain (Refer Drg P12258 R1) for details, Please refer attached Techno-Commercial Offer`

`WATER FEATURE WATERBODY No.3: Supplyand Installation of Tiered Stone Water fountain (Refer Drg P12257) for details, Please refer attached Techno-Commercial Offer`

`WATER FEATURE WATERBODY no.4: Supply and Installation of Water Bubbler with Yogi Sculpture (Refer Drg P12262) for details, Please refer attached Techno-Commercial Offer`.

`Supply and Installation of Musical Fountain in a circular pool, 20 m dia: (Refer Drg P12264) for details, Please refer attached Techno-Commercial Offer`

Bidder Name

Amount

Shishpal Govt. Contractor (GSTN-06AKPPP4326H1ZX) BID ID -1023175

M/s Kisan construction company (GSTN-06AAJFK3839Q1ZN) BID ID -1023362

Dinesh Kumar Contractor(GSTN-NA)--1023127

M/s Kisan construction company

Dinesh Kumar Contractor

Shishpal Govt. Contractor

M/s Kisan construction company