Circular lifting magnet.

Description :Circular Lifting Magnet for lifting cold as well as hot material up to 600 degree C in foundry e nvironment. It shall be a deep field coil design, copper wound coils for 220V DC operation and a heavy-duty cast steel case must include 03-Leg chain and Bail assembly, External electrical connectors and Surge supp ressor, Heavy duty cast magnet designed for severe scrap handling duty, confirming to the Following detail specification as per attached Annexure-'A'. NOTE: 1. Eight (08) Hours Heat rise Test to be performed as per rated duty cycle to verify Magnet Integrity. Temperature rise test, High Voltage test and Insulation Resistan ce test should be performed and recorded for traceability and future reference. 2. Magnet must comply as per detailed specification attached in Annexure-A 3. All relevant tests and test certificates shall be submitte d along with supply 4. The manufacturer shall carry out continuous load test 5. Warranty:24 month from th e date of commissioning and proving out of M&P 6. Load testing shall be done by TPI as per Load capacity defined as per Annexure-A 7. Stage inspection before closing the magnet and Final inspection after readine ss by TPI as per attached QAP. Both reports to be submitted by the firm to RWP/Bela with the supply 8. Ten derer shall indicate the service support availability. Required Make-ELECTRO FLUX/OHIO/ELECTRO MAGNETI C INDUSTRIES/ ELEKTROMAG METHODS or Similar in all respects. [ Warranty Period: 24 Months after the date of delivery ] ] Consignee SSE/Elect/Control/RWP, RWP Bihar 1.00 Numbers Product Inspection:Stage 1: TPI before closing the magnet (as 100% of PO Qty) (100% Inspection Details of PO Qty )