REPAIR TO TOILETS, KITCHEN CUP BOARDS, GLAZING, WATER STORAGE TANKS AND CONNECTED WORKS IN NORTH, MUTAGA AND TILAKWADI CAMP AT AFS UNDER GE (AF) SAMBRA.

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level), complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) of any thickness and in any position and rubbish off the premises complete all as specified and directed.

Dismantling and breaking up drain pipes (salt glazed ware, AC, reinforced concrete, PVC or Cast iron) set in cement mortar of size 100mm/75mm fixed over wall or in floor including clamps etc., complete all as specified and directed.

Demolition of brickwork, concrete masony work or stone/boulder masonry work, built in cement mortar of any grade including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down cement mortar rendering/plastering of any thickness and of any description including raking out joints, hacking for key, scrubbing down with water etc., over wall or ceiling surfaces of any description complete all as specified and directed.

Taking up or down 15mm bore, mild steel or of any material water tubing and including fittings/connections etc., fixed over wall or in floor including necessary cutting/chasing and making good in cement mortar 1:4 complete all as specified and directed.

Taking up or down 20mm bore, mild steel or of any material water tubing and including fittings/connections etc., fixed over wall or in floor including necessary cutting/chasing and making good in cement mortar 1:4 complete all as specified and directed.

Taking up or down 25mm bore, mild steel or of any material water tubing and including fittings/connections etc., fixed over wall or in floor including necessary cutting/chasing and making good in cement mortar 1:4 complete all as specified and directed.

Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) including hold fasts from wall and making good in cement mortar 1:4 complete all as specified and directed.

Taking down chowkhats or frames exceeding 1.5Sqm but not exceeding 4Sqm each with shutters (without taking off shutters from the frames) including hold fasts from wall and making good in cement mortar 1:4 complete all as specified and directed.

Taking down shutter of any description and material exceding 1.00 Sqm but not exceeding 2.00 Sqm each complete all as specified and directed.

S&F in repairs fancy type 15mm dia long body fancy type bib tap chromium plated cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete all as specified and directed. Make: Jaquar Cat Part No. APR-101107 or equivalent Cat part of makes as specified in list of makes of Particular Specifications

S&F in repairs fancy type 15mm bore short body fancy type bib tap chromium plated cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete all as specified and directed. Make: Jaquar Cat Part No. APR-101037/Cera Cat Part No. F101315 or equivalent Cat part of makes as specified in list of makes of Particular Specifications

S&F in repairs 15mm bore fancy angle stop valve, chromium plated, cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete all as specified and directed. Make: Jaquar Cat Part No. APR-101053/Cera Cat Part No. F1013201 or equivalent Cat part of makes as specified in list of makes of Particular Specifications

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs 10 liter flush PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float, and handle/push type, including 32mm bore PVC long/short flusing pipe and brackets complete all as specified and directed.

S&F in repairs fancy type square shape of minimum size 100mmX100mm swivel shower of cast stainless steel, including CP finish shower rod (long) and cup washer/wall flange for fixing with 15mm bore pipe/fittings complete all as specified and directed.

S&F SS gratings 150mmX150mm size with openable circular dia grating with or without waste hole including necessary cutting and make good of floor complete all as specified & directed.

S&F in repairs tubular brass chromium plated Towel rail "D" type 60cm long between flanges complete all as specified and directed. Make: Cera (Cat Part No. F5003103 or equivalent Cat part of makes as specified in list of makes of Particular Specifications

S&F in repairs CP finish soap dish cast stainless steel fixed to plugs complete all as specified and directed.

S&F in repairs, three in one, 15mm bore, cast copper alloy CP finish bathroom wall mixer cast copper alloy, for mixing hot & cold water screwed down for water pipe/fittings including "EL" bend and 1.25m long telephonic shower with hook complete all as specified and directed.

S&F in repairs vitreous China wash hand basin, white in colour, flat back of size 550X400X200mm including pedestal, and 32mm bore CP finish copper alloy waste fitting/coupling, 32mm bore PVC waste pipe including cutting for and pinning in ends of brackets or erecting stand brackets complete all as specified and directed. Make:- Cera Cat Part No. S2040157 & 2090101/Jaquar Cat Part No. ECS-WHT-801 & ECS-WHT-301 F59 or equivalent Cat part of makes as specified in list of makes of Particular Specifications

S&F wall mounted Sheet glass shelf assembly consisting of acrylic sheet shelf 12cm wide with chromium plated bracket guard and railing, 60cm long complete all as specified and directed.

S&F wall mounted Sheet glass corner shelf assembly consisting of acrylic sheet shelf 20cm wide and 30cm long each side with chromium plated bracket guard and railing, complete all as specified and directed.

Taking down shutter of any description and material from frame/chowkhat exceeding 1Sqm but not exceeding 3Sqm each and re-fixing in the same opening after necessary repairing, ease and adjust, cutting, grinding, adjusting, including using new nails/screws complete all as specified & directed. Note: Material required other than mentioned in this item such as builders hardwares shall be paid under respective supply only item.

Taking down shutter of any description and material from frame/chowkhat not exceeding 1Sqm each and re-fixing in the same opening after necessary repairing, ease and adjust, cutting, grinding, adjusting, including using new nails/screws complete all as specified & directed. Note: Material required other than mentioned in this item such as builders hardwares shall be paid under respective supply only item.

S&F in replacement stainless steel wire cloth 0.36mm dia of wire and average width of aperature 1.40mm and fixed in wooden/steel/aluminium door/window shutters including new second class hard wooden/Aluminium section/welding/nut bolt/ beading of required size to secure the wire cloth/mesh complete all as specified & directed.

S&F 4mm thick sheet glass, ordinary quality, in square not exc 0.5 Sqm in each pane including taking down from wooden/steel/aluminium shutter of any description including using necessary size of second class hard wooden beading/glass putty/glass pins etc. to secure the glasss complete all as specified & directed.

S&F 4mm thick figured glass, ordinary quality, in square not exc 0.5 Sqm in each pane including taking down from wooden/steel/aluminium shutter of any description including using necessary size of second class hard wooden beading/glass putty/glass pins etc. to secure the glasss complete all as specified & directed.

M&L for 12mm thick plaster in CM 1:4, over old/new RCC/PCC surfaces of wall and floor using 1% by weight of cement, liquid integral water proofing compound finished even and smooth without using extra cement including the following provisions:- (a) After curing and drying of surface, apply solution of one coat, grey cement mixed with chemical Tapecrete P-151(Make CICO)/Pidicrete URP (Make Dr Fixit)/or equivalent product of Fosroc mixed in 1:2 (one part chemical two parts of grey cement) proportion, apply with painting brush/roller to seal the pores in wall, slab and floor. (b) After drying providing and laying of fiber mesh cloth over entire area and apply solution in two coats, white cement mixed with chemical Tapecrete P-151(Make CICO)/Pidicrete URP (Make Dr Fixit)/or equivalent product of Fosroc , mixed in 1:2 (one part chemical two parts of white cement) proportion including preparation of surface, cleaning as per manufacturer’s instructions complete all as specified and directed. Note: Fiber Mesh shall be paid under supply only item.

Supply only fiber mesh cloth to cover cracked area over wall/roof surfaces fixed with chemical or as per manufacturer's instrcuctions complete all as specified and directed.

Material, labour, T & P required for welding on site of steel window/gate or hinges or similar work to steel sections of any description, thickness of weld exceeding 6mm but not exceeding 9mm including taking out of unserviceable material, easing to shutter, grinding, sanding complete to make usable and openable complete all as specified & directed. Note: Builders Hardware shall be supplied under supply only item.

Supply only 100mm medium weight mild steel butt hinges complete all as specified & directed.

Supply only 100mm medium weight stainless steel butt hinges including necessary stainless steel screws of reqd size complete all as specified & directed.

Supply only 75mm medium weight butt hinges complete all as specified & directed.

Supply only box type hinges/projected type for steel window/ventilator or similar description complete all as specified & directed.

S&F 125mm long cast type anodised aluminium handle complete all as specified and directed.

S&F 150mm long cast type anodised aluminium handle complete all as specified and directed.

S&F 100mm long aluminium anodised hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring and vulcanised rubber piece complete all as specified and directed.

Supply only 125mm long cast type anodised aluminium handle complete all as specified and directed.

Supply only 150mm long cast type anodised aluminium handle complete all as specified and directed.

Supply only 100mm long aluminium anodised hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply only floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring and vulcanised rubber piece complete all as specified and directed.

S&F in repairs for 250mm length of bolt, Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs 200mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and directed.

Supply only 250mm length of bolt, Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Supply only 200mm length of bolt, aluminium anodised barrel tower bolts of extruded section, complete all as specified & directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid one side decorated and other side plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws complete all as specified & directed. Note: stainless steel butt hinges and necessary stainless steel screws shall be paid separately

S&F 17mm to 18mm thick Celuka ply one side prelam/rigidlam and other side plain colour fixed with screws, solvent cement/adhesive to make cup board/ cabinet shutters/drawer front/sides, partitions, shelves etc. including 1mm thick PVC lipping/beading fixed with solvet over edges of ply of required width and colour complete all as specified and directed. Make: Rajshri Plastiwood or equivalent make as specified in list of makes of Particular Specifications

S&F sleek soft hydraulic auto closing 3D (Big bend/middle bend/straight arm type) stainless steel finish hinges openable of 0 or 15 degree crank for cup board/ cabinet shutters (sample available in GE Office) complete all as specified and directed. Make: Hettich, Harrison, Earl Bihari

Supplying and laying 16mm outer dia CPVC pipes SDR 11 including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and their making good complete all as specified & directed.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and their making good complete all as specified & directed.

Supplying and laying 25mm outer dia CPVC pipes SDR 11 including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and their making good complete all as specified & directed.

Supply and laying of 25mm bore GI tubing medium grade galvanised, with all fittings of same size or of reducer or enlarged bore fixed to walls/ceiling or laying in floors including necessary cutting/chases in wall/floor of any description and their making good complete all as specified and directed.

S&F to chowkats 30mm thick factory made wire mesh solid WPC door shutter consisting of density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws.Other hardwares should be fixed with 19x6mm size steel screws etc. complete as per direction of Engineer-in -charge, manufacturer's specification & drawings.

M&L in repairs, 18mm to19mm thick block boards, grade 2 quality, interior grade, commercial type, fixed to timber frame work as in cup board/almirah shelves or similar type of works including second class hard wood beading/margin/leeping alround the edge of the board complete all as specified and directed.

S&F high grade plastic, bath room mirror cabinet of size 450mmX350mm & 3mm thick looking mirror of make Modifloat or equivalent fixed to wooden/PVC plugs with screws complete all as specified and directed.

S&F in repairs toilet paper holder with flat recessed type stainless steel material complete all as specified and directed.

S&F in repairs vitreous China wash down water closet pan, pedestal pattern white (excluding flushing cistern) including plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including necessary PCC bedding, "P" or "S" PVC trap connected to PVC/CI pipes complete all as specified & directed.

M&L for cleaning and removing of all scale and dirt etc., from tanks, and from mouth of circulating pipes etc. including using 50gm of bleaching powder per tank after disconnecting of outlet pipe and re-connecting in the same position, capacity of tank exc. 250 litres but not exc. 500 litres each and marked on tank with white synthetic enamel paint as " tank cleaned on ________" using stencil complete all as specified & directed.

M&L for cleaning and removing of all scale and dirt etc., from tanks, and from mouth of circulating pipes etc. including using 70gm of bleaching powder per tank after disconnecting of outlet pipe and re-connecting in the same position, capacity of tank exc. 500 litres but not exc. 1000 litres each and marked on tank with white synthetic enamel paint as " tank cleaned on ________" using stencil complete all as specified & directed.

S&F PVC water storage cover of 500/1000 liter capacity of any description and shape as per existing water storage tank including necessary locking facility complete all as specified & directed

S&F in repairs vitreous China half stall urinal of size 350X340X615mm, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement; fixing to flushing cistern, flush pipe, 40mm bore CP finish cast copper alloy waste fitting complete all as specified & directed.

S&F in repairs 32/40mm dia PVC flexible waste pipe for wash hand basin, kitchen sink, urinal or similar work complete all as specified & directed.

S&F in repairs 32mm dia CP finish cast copper alloy waste fitting for wash hand basin, with long screwed shanks and fly nut and flange end, bedded in red lead cement complete all as specified & directed.

S&F in repairs CP finish cast copper alloy waste fitting for stainless steel kitchen sink, as per existing size and designs, with long screwed shanks and fly nut and flange end, bedded in red lead cement complete all as specified & directed.

M&L for pre-cast cement concrete block, (1:3:6), type C1 (using 20mm graded crushed stone aggregates) masonry with solid blocks and setting in cement mortar (1:4) having minimum compressive strength of 50 Kg per Sqcm complete all as specified and directed.

M&L for plain cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) for in mud stops, roof kerbs, rounded or chamfered or similar items finished fair and even including necessary form work complete all as specified and directed.

M&L for plain cement concrete, 25mm thick, (1:2:4), type B-0, (using 12.5mm graded crushed stone aggregate) for levelling/to receive screed for laying floor finish, finished fair and even complete all as specified and directed.

M&L for plain cement concrete, 75mm thick, (1:2:4), type B-1, (using 20mm graded crushed stone aggregates) for sub-base of floors & pavings or similar work finished fair and even complete all as specified and directed.

M&L for plain cement concrete, 75mm thick, (1:3:6), type C-1, (using 20mm graded crushed stone aggregates) for plinth protection including filling of expansion joint with bituminous mixture finished fair and even complete all as specified and directed.

M&L for plain cement concrete, 75mm thick, (1:4:8), type D-1, (using 20mm graded crushed stone aggregates) for sub-base of floors or of similar type of work finished fair and even complete all as specified and directed.

M&L for plain cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregates) as in coping, hold fast or of similar type of work including necessary form work complete all as specified and directed.

M&L for sand filling under paver block/floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 60mm thick rubber mould, machine pressed, precast concrete interlocking paver block, rubber moulded of any shape and size confirming to IS 15658-2006, M-35 Grade of concrete with grey cement and pigment complete all as specified and directed.

M&L for coloured non-skid ceramic tiles 6mm to 7mm thick (square/rectangular) area of each tiles exceeding 0.08 sqm but not exc 0.16 sqm as in floor, set and jointed in neat cement slury and pointed in white cement with pigment to match the shade of tiles laid over and including cement screed bed or bedding layer of 15mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for coloured glazed ceramic tiles joint less/edge cutted of size 450x300x7mm thick as in vertical surfaces such as skirting, dado, etc., set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 10mm thick backing/rendering in cement mortar (1:4) complete all as specified and directed. Note:- Those tiles fixed right angled to each other, the each tile should be chamfered/trim/sharp at 45 degrees at joint/corner/edge, the quoted rates are inclusive of this.

M&L for joint less/edge cutted glazed/matt finish light/dark shade double charged vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour, set and jointed in neat cement slury laid over and including 15mm thick cement screed bed or bedding layer in CM(1:4) complete all as specified and directed.

M&L for joint less/edge cutted glazed/matt finish light/dark shade double charged vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour laid over and including 10mm thick plastering in CM(1:4) complete all as specified and directed. Note:- Those tiles fixed right angled to each other the each tile should be chamfered/trim at 45 degrees at joint/corner /edge, the quoted rates are inclusive of this.

M&L for 15mm thick cement plaster in CM 1:6 over walls surface of any description and material, finished even & smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 over walls surface of any description and material, finished even & smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:3 over ceiling surface of any description and material, finished even & smooth without using extra cement complete all as specified and directed.

S&F in repairs single piece white colour vitreous china floor mounted pedestal pattern wash down water closet having PVC/CI 'P' or 'S' type trap element, rimless one piece including all accessoreis i.e; seat cover, 1.5m flexible PVC pipe and CP finish cast copper alloy 15mm bore health faucet, 15mm bore PVC connection pipe 450mm long, including CP finish copper alloy two way fancy bib cock 15mm bore complete all as specified and directed. Note: Joints between floor and WC shall be filled with silicon jel and screws required for fixing shall have stainless steel of required size shall be included in the quoted rates. Make:- Cera Cat Part No. S1013217/ Jaquar Cat part No. ECS-WHT-851S300SPPSM or equivalent Cat part of makes as specified in list of makes of Particular Specifications

S&F in repairs 15mm bore fancy wash basin mixer, cast copper alloy, chromium plated including necessary connecting pipe, screwed down, screwed for water pipe complete all as specified and directed. Make: Jaquar Cat Part No. APR-101011NB/Cera (Cat Part No. F1018403) or equivalent Cat part of makes as specified in list of makes of Particular Specifications

S&F in repairs 25mm nominal bore CPVC, globe or gate valves, connected with pipe with solvent of any material complete all as specified & directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall with necessary mild steel clamps complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall with necessary clamps complete all as specified and directed. Make: Astral, Prince, Finolex

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S&F PVC (SWR) floor trap of outlet dia 75mm, plain with SS gratings 125X125mm size with openable circular grating with or without hole including jointing with solvent cement including fixing to pipe properly with solvent complete all as specified and directed.

S&F PVC (SWR) bends with access door for 75 mm bore pipe complete all as specified and directed.

S&F PVC (SWR) bends with access door for 110 mm bore pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal size with access door for 75 mm bore pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal with access door for 110mm bore pipe complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm dia complete all as specified & directed.

Supply, hoisting and fixing of triple layer, ISI marked, 1000 Litre rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) fixed in position including PTMT 25mm bore ball valve high pressure with epoxy coated aluminium rod and high density plastic ball , two nos new tank nipples of PTMT material 20/25mm bore as required including dismantling existing water tank complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminum frame for doors, windows, ventilators with one or more rebates including jointing cleats for fixing each other etc. complete all as specified and directed.

S&F Aluminium sliding windows shutters powder coated (minimum thickness of powder coating 50 micron) including powder coated main frame, three track (two for glazed and one for wire mesh) without sash bars including necessary jointing cleats, glazing clips, EPDM rubber packing, powder coated aluminium snap beading, screws, wheels, locking arrangments, suitable handles for sliding purpose, 4mm thick dark black tint plain glass and stainless steel wire mesh of dia 0.36mm and 1.40mm width of aperature, silicon chemical filling at gaps between section frame and wall surfaces complete all as specified and directed with the following sections of sliding window :- (a) Main Frame bottom section : Jindal section No 20798 or equivalent section of makes as specified in list of makes of Particular Specifications (b) Main Frame top & sides section : Jindal section No 20678 or equivalent section of makes as specified in list of makes of Particular Specifications (c) Sliding shutter section (handle ) : Jindal section No 20707 or equivalent section of makes as specified in list of makes of Particular Specifications (d) Sliding shutter section for top & bottom : Jindal section No 20842 or equivalent section of makes as specified in list of makes of Particular Specifications (e) Sliding shutter section for interlock : Jindal section No 21091 or equivalent section of makes as specified in list of makes of Particular Specifications

S&F Aluminium window and ventilator shutters powder coated (minimum thickness of powder coating 50 micron), side hung type without sash bars, aluminium sections of not less than 60mm width & 1.50mm thick including necessary joining cleats, glazing clips, EPDM rubber packing, snap beading, screws, peg stays 150mm long (1 No. per window), hinges 100mm long (2/3 Nos.) suitable handle (1 No.) complete all as specified & directed.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminium section of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coated aluminium section of standard section around the opening complete all as specified & directed.

S&F sheet glass, ordinary quality, in squares, pane of 4mm thickness not exc 0.5 Sqm each with solar control film 50micron reflective type sticked to glass pane complete all as specified & directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws/first class wooden beadings complete all as specified & directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm² , modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed.

S&F second class hardwood plain solid straight chowkhat and frame wrought framed rebated on the solid rounded or chamfered but together with glue pinned at joint complete all as specified & directed.

S&F stainless steel handles 100mm size, D type dotted for kitchen/cup board cabinet shutters complete all as specified and directed.

S&F drawer ball bearing runners 45mm telescopic channel (20 inch) full extension load capacity 50 Kgs complete all as specified and directed.

S&F mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate of soft closing hydraulic pattern including welding to frame as required complete all as specified and directed.

M&L for two coats of synthetic enemal paint over a coat of pink primer on new wooden surface over 10cm width or girth including preparation of newly wooden surface duly filled the voids with enamel based putty complete all as specified and directed.

M&L for preparation of old decorated painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint duly filled the voids with enamel based putty complete all as specified and directed.

M&L for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint duly filled the voids with enamel based putty complete all as specified and directed.

S&F in repairs 25mm dia decorative type stainless steel curtain rods with decorative type including fixing end brackets, middle brackets , stops, etc. complete all as specified and directed.

S&F window guard bars, hold fasts of plain/square conforming to Fe-290, Gde E-165 and fixed in walls of any description including bed blocks cutting, angle iron/flat iron frame of appd design and similar articles complete all as specified and directed.

M&L for two coats synthetic enamel paint over new steel surfaces of any description, over 10cm in width or girth, not otherwise described duly filled the voids with enamel based putty complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of primer on walls, pillasters, cornices, etc., on newly plastered surfaces using spunge roller including one coat of primer over 2mm thick wall care putty in two coats complete all as specified and directed.

M&L for three coats of white wash on newly plasterd ceiling surfaces including necessary filling of voids with wall care putty complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for preparing, washing, rubbing down and stopping of distempered surface and complete removal of existing treatment and painted surfaces and applying two coats of oil bound distemper using spunge roller including one coat of primer over 2mm thick wall care putty in two coats on walls, pillasters, cornices etc., complete all as specified & directed.

M&L for preparing, washing, rubbing down and complete removal of existing treatment for applying two coats of acrylic emulsion paint of Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer applied on old decorated surfaces of walls including necessary filling of voids with wall care putty complete all as specified and directed.

M&L for three coats of white wash on old decorated surfaces of ceiling including necessary filling of voids with wall care putty complete all as specified and directed.

S&F GI wire netting 0.90mm dia and 12mm square mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting, waste and cutting in plaster, concrete/stone surafce in patches complete all as specified and directed.

M&L for 50mm bore high density polyethylene pipes (HDPE) and fittings of pressure rating 6kgf/cm² fixed complete to walls, ceilings or in floors as drain out pipe etc., including necessary cutting and chasing in wall or floor of any description complete all as specified and directed.

M&L for 20mm thick pre-polished (table rubbed and polished) machine cut Granite stone work (of any type & size) in steps(treads), window/door-cills, cooking platforms, wash hand basin counter and like bedded and jointed with grey cement slurry with and including 20mm thick cement mortar (1:4) including pointing in white cement with pigment to match with shade of granite and cutting for circular holes of any dia for fixing sanitary fittings or of simialr work complete all as specified and directed.

S&F 20mm thick pre-polished (table rubbed and polished) machine cut Granite stone work (of any type & size) in steps(risers), jambs, pillars, dado/skirting and like laid over cement screed bedded with and including 15mm thick cement mortar (1:4) and jointed with grey cement slurry including pointing in white cement with pigment to match with shade of granite and cutting for circular holes of any dia for fixing sanitary fittings or of simialr work complete all as specified and directed.

S&F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron/CPVC/PPR pipe and fixed complete all as specified and directed.

S&F in repairs 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron/CPVC/PPR pipe and fixed complete all as specified and directed.

M&L for full round and polished moulding (as per main stone polish) to edges of stone slabs upto 20mm thick, such as in window cill, jambs, counters, steps etc. and of other similar situations complete all as specified and directed.

S&F in repairs fancy swan neck Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

Supply, hoisting and fixing of three layered wall construction, ISI marked, 500 Litre rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) fixed in position including PTMT 25mm bore ball valve high pressure with epoxy coated aluminium rod and high density plastic ball including dismantling existing water tank of any type & any capacity complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen of grade 85/25 @ 1.2 kg per Sqm without leaving the pores/voids in the surface including cleaning the surfaces over primed or APP membrane surface complete all as specified and directed.

M&L for applying bitumen based primer for use in waterproofing and damp-proofing treatments applied @ 0.30 liter per Sqm in two coats over concrete/plastered surface including cleaning the surface complete all as specified and directed.

M&L for providing and laying APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) forced application with the fire torch complete all as specified and directed.

M&L for preparation of bituminuous surface of any description and applying two coats of Aluminium paint complete all as specified and directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete as specified and directed.

RAJENDRA KRISHNA SARAF (BID ID -3386465)

PURVIK CONSTRUCTIONS (BID ID -3393029)

M/s. N D KALING (BID ID -3385563)

AARADHYA ENTERPRISES (BID ID -3392448)

M/S MAHADEV M PATIL (BID ID -3384148)