REPAIR TO ALL TYPE OF STEEL FURNITURE UNDER GE AMRITSAR

Amount

Almirah steel small Removing the unserviceable lock of Almirah steel small (FD 67/1032) and tighting of loose parts of the locking device and supply and fix new lock 7 lever with duplicate keys all as specified and shown on drawing (Make of Lock- Harison)

Removing the existing unserviceable 3 way locking device of Almirah steel med (FD 67/1032) and fix new locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality to match with exiting all as specified and as directed

Removing the existing unserviceable handle of Almirah steel small (FD 67/1032), supply and fix 100 mm size new chromium plated steel handle of approved quality all as specified and shown on drawing

Removing the existing unserviceable leg, supply and fix new leg made of 1mm thick CRCA sheet to match the existing duly welded/riveted of Almirah steel med (FD 67/1032) and painted with one coat of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed

Removing the existing unservicable/Rusted door shutters (both) of Almirah steel med (FD 67/1032), supply and fix new door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever brass lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing (Make of Lock- Harison)

Removing the exisiting unserviceable shelves of Almirah steel medium (FD-67/1032), supply and fix new shelves made of 1mm thick CRCA sheet to match the existing duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed.

Almirah steel large Removing the unserviceable lock of Almirah steel large (FD-67/1031) and tighting of loose parts of the locking device and supply and fix new lock 7 lever with duplicate keys all as specified and shown on drawing (Make of Lock- Harison)

Removing the existing unserviceable 3 way locking device and suppply of Almirah steel large (FD-67/1031)and fix new locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality to match with exiting all as specified and as directed

Removing the existing unserviceable handle of Almirah steel large (FD-67/1031), supply and fix 100 mm size new chromium plated steel handle of approved quality all as specified and shown on drawing

Removing the existing unserviceable leg of Almirah steel large (FD-67/1031), supply and fix new leg made of 1mm thick CRCA sheet to match the existing duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed

Removing the existing unservicable/Rusted door shutters (both), supply and fix new door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever brass lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing (Make of Lock- Harison)

Removing the existing unserviceable shelves and supply of Almirha steel large (FD-67/1031) and fix new shelves made of 1mm thick CRCA sheet to match the existing duly welded/riveted and painted with one coat of synthetic enamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed.

Locker steel Removing the existing unserviceable handle of Locker steel (FD-1029), supply and fix 100 mm size new chromium plated steel handle of approved quality all as specified and shown on drawing

Removing the existing unserviceable hasp & stapple of Locker steel (FD-1029), supply and fix new chromium plated steel hasp & stapple of approved quality and appropriate size all as specified and shown on drawing

Removing the existing unservicable/Rusted door shutters (both) of Locker steel (FD-1029), supply and fix new door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, chromium plated hasp & stapple of approved quality and appropriate size and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing.

Table dinning ORs steel Removing the existing unserviceable/rusted leg/stiffener and supply of Table dinning ORs steel (FD-165 (R) and fix 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame to match with original shape and position including minor repairs to the table and painting the replaced portion all as directed.

Removing the existing unserviceable table top of Table dinning ORs steel (FD-165 (R)), supply and fix new top made of 18mm thick pre-laminated particle board one side teak face including provision of 4mm thick teakwood beading all around complete all as directed

Supply and fix new PVC shoe suitable to the leg of Table dinning ORs steel (FD-165 (R) after removing the unserviceable shoe.

Table office officer/clerk steel Removing the existing unservicable/rusted drawer complete of Table office officer/clerk steel (FD-84/1003,1004 ) and supply and fix new drawer complete made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer all as specified and shown on drawing (Make of Lock : Harison/Godrej)

Removing the existing unserviceable/rusted leg/stiffener of Table office officer/clerk steel (FD-84/1003,1004), supply and fix 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of primer all as directed

Removing the existing unserviceable lock of Table office officer/clerk steel (FD-84/1003,1004) and supply and fix new lock of 6 levers with duplicate keys including removing dents and adjustment of locking device of drawers for smooth functioning complete all as specified and as directed

Removing the existing unserviceable side panel of table' locker of Table office officer steel (FD-84/1003) and fix new locker made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparating of surfaces complete all as specified and as directed

Removing the existing unserviceable table top of Table office officer steel (FD-84/1003), supply and fix new top made of 18mm thick pre-laminated particle board one side teak face including provision of 4mm thick teakwood beading all around complete all as directed.

Removing the existing unserviceable table top of Table office clerk steel (FD-84)/1004 and fix new top made of 18mm thick pre-laminated particle board one side3 teak face inculding provision of 4mm thick teakwod beading all around complete all as directed.

Supply and fix new PVC shoe suitable to the leg of Table office officer/clerk steel (FD-84/1003,1004) after removing the unserviceable shoe.

Table 900 x 600 x 760MM & table 900 x 600MM folding Removing the existing unserviceable table top of Table 900 x 600 x 760MM & table 900 x 600MM folding (FD-1007/1008) and supply and fix new top made of 18mm thick pre-laminated particle board one side teak face including provision of 4mm thick teakwood beading all around complete all as directed

Supply and fix new PVC shoe suitable to the leg of Table 900 x 600 x 760MM & table 900 x 600MM folding (FD-1007/1008) after removing the unserviceable shoe.

Table 900 x 900 x 760MM Removing the existing unserviceable table top of Table 900 x 900 x 760MM (FD-1009) and supply and fix new top made of 18mm thick pre-laminated particle board one side teak face including provision of 4mm thick teakwood beading all around complete all as directed

Removing the existing unserviceable/rusted leg of Table 900 x 900 x 760MM (FD-1009) and supply and fix 25 x 25 x 1.6mm thick MS squire pipe leg duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of primer all as directed

Supply and fix new PVC shoe suitable to the leg of Table 900 x 900 x 760MM (FD-1009) after removing the unserviceable shoe.

Table dinning 1520 x 860 x 760MM Removing the existing unserviceable table top of Table dinning 1520 x 860 x 760MM (FD-1010) and supply and fix new top made of 18mm thick pre-laminated particle board one side teak face including provision of 4mm thick teakwood beading all around complete all as directed

Supply and fix new PVC shoe suitable to the leg of Table dinning 1520 x 860 x 760MM (FD-1010) after removing the unserviceable shoe.

Rack steel 1830 x 760 x 1905 MM Removing the existing unserviceable angle iron of Rack steel 1830 x 760 x 1905 MM (FD-129 (M)) and supply and fix new MS angle iron of size 30 x 30 x 3mm thick, 1905mm long including painting with one coat of synthetic enamel paint olive green shade of approved quality over a coat of primercomplete all as specified and shown on drawing

Removing the existing unserviceable shelves of Rack steel 1830 x 760 x 1905 MM (FD-129(M) and supply and fix new shelves of size 760 x 915mm made of 1mm CRCA sheet in appropriate size and shape including painting with one coat of synthetic enamel paint olive green shade of approved quality over a coat of primer complete all as specified and shown on drawing

Table bed side (steel) Removing old UNSV top of Table bed side (steel) FD/E6/MAP/15 and supply & fix new top of 18mm thick pre-laminated BWR exterior grade board. Particles board for various members indicated on drawings shall be pre-laminated BWR exterior grade with melamine faced veneers on one side 4 mm teak edging shall be provided to the edges of baord as shown on drawings. Back shall be covered with 6mm thick playwood BWP grade conforming to IS:303. Drawer and pull out tray shall be provided with telescopic channels made of mild steel of 1:6 mm thick. Handles shall be 100mm long powder coated no-ferrous metal alloy. Rest all as per drawing.

Removing old UNSV square tube of Table bed side (steel) FD/E6/MAP/15 and S&F new 18mm square tube in each.Rest all as per drawing.

S&F of PVC Shoe of Table bed side (steel) FD/E6/MAP/15 suitable to the leg after removing the unserviceable shoes.

Chair computer M&L for removing the existing damaged twin wheel casters from chair computer (FD/E6/MAP/01) and supply and fix new caster duly fixed to match with the existing all as specified and as directed .

M&L for repairs to seat from chair computer (FD/E6/MAP/01) and back of Chair providing new tepastry/polister cloth and rubber foam including replacement of arms rest with new arm rest and repairs to gas lifting and swivel machenism to its original condition complete including greasing, painting etc all as specified.

M&L for removing unserviceable PVC arms rest supply from chair computer (FD/E6/MAP/12) and fix new PVC arms rest as to match with the existing all as specified and as directed.

PVC Base for Chair Computer superior quality

Shocker for Chair Computer/Revolving superior quality

Chair tubular steel with/without arms Removing unserviceable seat frame of chair tubular steel with/without arms from chair steel tubular with/ without arms (FD-75 M) and supply and fix new seat frame made out of shisham wood french polished duly plastic canned in 'Godrej' pattern with plastic cane 2mm width and borders with 4mm wide plastic cane fixed with screws 4 Nos and nuts to the chair frame complete all as per drawing as specified.

All as per ser No 43 herein before but back frame.

Removing broken handle from chair steel tubular with (FD-75M) and replacing with new handle made of shisham wood duly french polished and fixed to the chair tubular with arms with screws of suitable size to the chair frame all as shown on drawing and as directed.

Supply & Fixing of bars MS Flat 25 x 25 x 4mm thick welded at four corner at bottom of the seat only to support from chair steel tubular with/ without arms (FD-75 M) and also screwed with the seat at two places complete all as specified and as directed.

Chair writing steel M&L for removing unserviceable arms rest from chair writing steel (FD/E6/MAP/12) and supply and fix new arms rest as to match with the existing all as specified and as directed.

M&L for removing torn/worn out latherite cloth with cushion of seat and back from chair writing steel (FD/E6/MAP/12) and supply and fix new latherite cloth with cushion of approved shade and quality with best upholstery including minor repairs all as specified and as directed.

Chair verandah M&L for removing the unserviceable conduit part from chair verandah (FD-256) frame and replace the same with new MS conduit 20mm bore,1.6mm thick, upto 30cm length, made to shape, duly welded all as directed.

M&L for removing the unserviceable conduit part from chair verandah (FD-256) frame and replace the same with new MS conduit 20mm bore,1.6mm thick, upto 30cm length, made to shape, duly welded all as directed.

M&L for removing of existing torn out/ unserviceable plastic cane from chair verandah (FD-256), prepare steel tubular frame surfaces of chair with emery paper for painting from and apply two coat of synthetic enamel paint of white colour of approved quality and recaning the chair fully both seat and back with new plastic cane, white, half round of size 4mm wide including providing new suitable PVC shoes of approved quality and colour all as directed.

BED HARD STEEL M&L for removing unserviceable plywood top from the bed hard steel and supply and fix new 12mm thick BWR phenol bonded commercial plywood on top of the bed all as shown on drawing and as directed

Table Computer Godrej Removing old UNSV top of Table Computer FD/E6/MAP/03 dimensions as shown in drawings. Shelves , vertical members, mouse trap , top and side etc shall be of 18 mm thick prelaminated melamine faced paticle board exterior grade both side decorative. Wooden beading shall be 4 mm thick of 1st class H.W Teak. . .

Removing old UNSV Drawer and pull out tray shall be provided with telescope channels made of mild steel of 1.25 mm thick.

Removing old UNSV Brass knob shall be 25 mm dia of shape as approved by Engineer-in-charge and shall be powder coated

Removing old UNSV PVC rectunglar cover shall be probided as shown in drawings.

PVC hard buffers shall be provided to legs of table. Rest all as specified and shown in drawings.

Chair Writing/Chair Dining Poly Seat (FD-261) M&L for welding the broken frames (wherever required) with Gas welding complete all as specified (Welding to 19/20mm MS Tube all round will be considered as one point)

M&L for removing the unserviceable poly seat and supply and fix new Poly seat with steel screws and washers of appropriate size complete all as specified

M&L for removing unserviceable rubber shoes and supply and fix new PVC shoes of approved quality complete all as specified

M&L for preparing the steel surfaces smooth and painting by synthetic enamel paint Black colour all as specified

Chair Schol With Hand Board (FD/E6/Map/05) M&L for welding the broken frames (wherever required) with Gas welding complete all as specified (Welding to 19/20mm MS Tube all round will be considered as one point)

M&L for removing the unserviceable poly seat and supply and fix new Poly seat with steel screws and washers of appropriate size complete all as specified

M&L for removing unserviceable rubber shoes and supply and fix new PVC shoes of approved quality complete all as specified

M&L for preparing the steel surfaces smooth and painting by synthetic enamel paint Black colour all as specified Rest all as specified and shown in drawings.

Charpoy IP with Hard Top M&L for removing unserviceable plywood from Charpoy IP (FD/MAP-II/01) and supply and fix new 12 mm BWR phenol bonded commercial plywood of size Over all size1980x900x440mm including replacement of bolts and nuts for fixing of plywood. Compleate all as specified and as directed by Engineer-in-Charge. Make of plywood - kit ply /Green ply/ National

All broken joints welding/fixing shall he done in accordance with standard workmanship and specification. All steel surfaces shall be paintted with 2 coat of with black colour enamel paint . Compleate all as specified and shown on drawing and directed by Engineer-in-Charge Note:- Repairs will be carried out in furniture yard and at different locations falls under GE ASR jurisdiction.

om parkash and sons

NAVEEN TRADERS